XI as adapter to SAP
Hi,
For my customer they have Biztalk as the corporate EAI.
Xi is the SAP adapter.They say that it is too big and heavy for this use.
They would like to take XI out and place an adapter to biztalk to talk with the SAP.
How can i make them understand that XI is usefull what are the advanteges that could rase here ?
hi,
just tell them:
1. oohhhhh no... have you heard about RFID ?
do you think you can use SAP with RFID without the XI?
think again...
2. you realy don't want any more new products from SAP?
like SRM, CRM or any other ? do you want to connect
with those applications with ease ? -
> XI has to be your choice
Regards,
michal
Similar Messages
-
Creating a new adapter in sap pi
Hi experts,
I got a requirement to configure custamised adaptor for the sibel systems.
Can you please provide information to build a new adapter in sap pi 7.1.
Thankyou in advance......Hi,
This [wiki|http://wiki.sdn.sap.com/wiki/display/XI/XIlibrariesfor+development] link should help get you started. I have a very useful PDF too that describes some of the steps but unfortunately I don't have the link where I got it from.
Regards,
Ryan Crosby -
Oracle Integration Adapter for SAP R/3
I am working with a customer implementing Oracle EBS Release 12.2.
The customer has implemented SAP for financial modules and the oracle solution considers an EBS - SAP Integration for Receivables. Does anyone have any experience integrating Oracle EBS Receivables with SAP? Can you give us some guidance regarding EBS - SAP Integration best practices?
We have found a paper regarding Oracle Integration Adapter for SAP R3. We would like to have some information about what are the Oracle products we can integrate with SAP using Oracle Integration Adapter for SAP R3.
In case Oracle EBS can integrate with SAP using Oracle Integration Adapter, we would like to know if anyone has experience integrating Oracle EBS Receivables with SAP using Oracle Integration Adapter for SAP R3 for AR transactions and Receipts?
Any help would be very much appreciated.Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason. -
Process flow of IDoc adapter in SAP PI
Hi Experts,
can any one pls send me about IDoc adapter in SAP PI/XI, which covers a complete info of IDoc adapter.
i mean complete in and out about IDoc adapter.
with rgds,
MFHi
If you do a search, you will get lots of material.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b2b4035c-0d01-0010-31b5-c470d3236afd
IDOC Adapter
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/idoc%252badapter
These links should help you out
Thanks
Saiyog -
How to pass a filename to MQHRF2 header in IBM MQ using JMS Adapter in SAP PI
Hi Expers,
Can you please help on ...
how to pass a filename to MQHRF2 header in IBM MQ using JMS Adapter in SAP PI
Thanks,
ChandarHi Chandar,
Could you check the following post Re: Inserting custom header fields inside MQRFH2 (JMS Receiver adapter)?
I hope you find it useful.
Regards! -
How to configure for GPlus Adapter with SAP Phone and SAP CRM
Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
GovindaHi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen -
RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning
Hi experts,
we are working on a java portal connected to a backend system SAP by calling RFCs.
On our first integration tests, it appears to be quite slow fetching data from SAP by calling the remote functions from the custom portal. We are using SAP JCo 3.0.6 and IBM resource adapter for SAP 7.0.0.3 to integrate SAP with our portal.
Is there any basic tuning to achieve to improve performances or any hint of where to tune in SAP ?
Any help would be greatly appreciated.
Thanks a lot,
JamalHi Jamal,
I understand you have already checked performance issues in the SAP Server. We had some problems with certain RFC calls and it turned out to be a badly developed ABAP sentence.
I'd recommend you to use httpwatch or another tool to check the response times from the browser, so you can point accurately where the is.
Regards
Francisco -
How to import seeburger adapter and mdm adapter in sap pi 7.3
Hi all,
how to import seeburger adapter and mdm adapter in sap pi 7.3Hello
To import the Seeburger adapters, follow the instructions in the Master Installation guide and the individual guides for each of the adapters. These are available with the Seeburger software downloads.
Regarding the MDM adapter, this is the wrong forum for that question. Try the MDM forum (but first, try searching the forum as this is a very basic question).
Regards
Mark -
Secure Connection option in MDM adapter in SAP PI 7.4
Hi,
We have an option for selecting secure connection in MDM sender and receiver adapter in SAP PI 7.4.
Can someone tell me what roles are required for the repository user in MDM system for this secure connection? Also, does it require any certificates to be installed in SAP PI system.hi,
we are also using SAP PI 7.4 dual stack system. there is no any certificates required in SAP PI.
XML Schema detail nto editable
go through this thread ..which is very useful for doing integration with SAP MDM.
Regards,
Krushi. -
How to add new Adapter in Sap XI
could you help me to how to add a new Adapter in SAP XI
after installation of SAP XI.
if any one send this really help full to me
RamHi,
I am getting an error when importing SAP Basis 640 Software components into Integration repository. It is giving thsese java errors:
com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method importFromImportSource. at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10.importFromImportSource(TransportServiceRemoteObjectImpl10.java:850) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10p4_Skel.dispatch(TransportServiceRemoteObjectImpl10p4_Skel.java:100) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NoClassDefFoundError at com.sap.aii.utilxi.core.strings.StringConversion.xml2String(StringConversion.java:645) at com.sap.aii.utilxi.dtd.api.DtdHelper.getString(DtdHelper.java:381) at com.sap.aii.utilxi.dtd.api.DtdParser.parseInputSource(DtdParser.java:68) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getDtdSchema(DtdInternalExternalCategoryService.java:72) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getExternalReferences(DtdInternalExternalCategoryService.java:48) at com.sap.aii.ibrep.bom.extdef.ExternalCategoryServiceImpl.getExternalReferences(ExternalCategoryServiceProvider.java:51) at com.sap.aii.ibrep.bom.extdef.ExternalDefinition.getExternalReferences(ExternalDefinition.java:35) at com.sap.aii.ibrep.server.persist.extdef.ExtDefInternalPersistSevice.writeTypeData(ExtDefInternalPersistSevice.java:95) at com.sap.aii.ib.server.persist.gen.PersistServiceProvider$PersistServiceImpl.writeObjectVersion(PersistServiceProvider.java:446) at
The environment is same as in our development server.
Any idea what causes this error.
Thanks for your help.
Madhu -
When is Oracle Adapter for SAP 10.1.2.0.2 released?
Hi,
I'm desperately waiting for the release of the Oracle Adapter for SAP
10.1.2.0.2. It is stated as Projected on the Download site.
I do still have serious problems with bug 2574376. This bug was fixed already
in July 2004. In that bug is stated that it is fixed in 10.1.2.
I am using the workaround to kill the process. But when I kill the process while the
adapter is processing data for update in SAP, I am losing that data. So the
update does not take place in SAP and the data is not in the persistence
anymore.
So please release this version!
Regards,
Aard-JanYes, but not for HPUX jet. And that is what I need.
Via Metalink I heard that it will be available around august. -
SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)
Hello Folks,
I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
SAP Support Enablement package (software component: ST-SEP)
Does anyone know where to get those components?
Thanks a lot,
MarcoHi Ravindra babu/ Murali:
I have one very quick doubt and would be really glad if you can help clarify.
As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
Regards,
Srini -
Exception occurred when tried to install Weblogic Adapter for SAP 7.0
Hi,
I tried to install current available Weblogic Adapters for SAP 7.0 into weblogic platform 8.1 sp3, I got the following exceptions. Those exceptions can be reproduced when to deploy BEA_SAP_1_0_70.ear into a weblogic integration domain. Based on BEA Weblogic Adapter for SAP installation guide, there should be a new version of adapter for SAP, such as BEA_SAP_8_1.ear, but for some reason, I couldn't find it. The following are error messages, please help.
Thanks,
pg
------------- error message ------------------
<Jul 28, 2004 3:01:41 AM EDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating Deploy task for application BEA_SAP_1_0_70.>
<Jul 28, 2004 3:01:41 AM EDT> <Error> <Deployer> <BEA-149201> <Failed to complete the deployment task with ID 2 for the application BEA_SAP_1_0_70.
weblogic.management.ApplicationException:
Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 2
Module: BEA_SAP_1_0.rar Error: Error parsing file at line: 36 column: 27. weblogic.xml.process.XMLParsingException: Error parsing file at line: 36 column: 27. The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)". - with nested exception:
[org.xml.sax.SAXParseException: The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)".]
org.xml.sax.SAXParseException: The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)".
at weblogic.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1189)
at weblogic.xml.jaxp.WebLogicParser.parse(WebLogicParser.java:67)
at weblogic.xml.process.ProcessorDriver.process(ProcessorDriver.java:154)
at weblogic.connector.deploy.dd.xml.WeblogicRarLoader_Connector10.process(WeblogicRarLoader_Connector10.java:170)
at weblogic.connector.deploy.dd.xml.DDUtil.processDDFile(DDUtil.java:380)
at weblogic.connector.deploy.dd.xml.DDUtil.processWeblogicRaDD(DDUtil.java:218)
at weblogic.connector.deploy.dd.xml.DDUtil.processDDFiles(DDUtil.java:126)
at weblogic.connector.deploy.dd.xml.DDUtil.getConnectorDescriptor(DDUtil.java:602)
at weblogic.connector.deploy.dd.xml.DDUtil.getConnectorDescriptor(DDUtil.java:577)
at weblogic.connector.deploy.ConnectorModule.loadConnectorDescriptors(ConnectorModule.java:693)
at weblogic.connector.deploy.ConnectorModule.loadDescriptor(ConnectorModule.java:202)
at weblogic.j2ee.J2EEApplicationContainer.loadDescriptors(J2EEApplicationContainer.java:1379)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1204)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1051)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2444)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2394)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2310)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)Hello,
You may have a lot of greif if this is the wrong version of adaptor for 8.1. I too was directed to this EAR file when looking for the 8.1 adaptor. The problem looks like it is in the weblogic-ra.xml file in BEA_SAP_1_0.rar. The some of the xml entries for <map-config-properties> loo incomplete:
<map-config-property>
<map-config-property-name>bselocation</map-config-property-name>
</map-config-property>
<map-config-property>
<map-config-property-name>bseeis</map-config-property-name>
</map-config-property>
Are missing a value tags.
You can try adding some dummy ones in order to get passed the SAX exception but you may run into more problems. (I was going to install this my self but never got round to it in the end).
Good Luck -
Inqmy resource adapter for SAP with Bea Weblogic Server
Hi everybody,
Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic server
It works well with INQMY server, but with BEA I'm getting a lot of problems creating
the connections.
Thanks in advance.
Xavi.
All,
Here are the steps we (used for internal testing) had to perform to get
IN-Q-MY adapter for SAP to work with WebLogic:
The wli.adapter.inqmy.sapr3.spi package contains extensions to the
In-Q-My J2EE Connector Architecture classes to overcome some limitations
in the base implementation classes. To get around these issues, we had
to extend their R3ManagedConnectionFactory, R3ConnectionManager, and
R3ConnectionFactory classes.
* The javax.resource.spi.ManagedConnectionFactory implementation
does not over-ride the equals and hashCode methods correctly. This
causes problems with WLS 6.1.
* There is a bug in their javax.resource.spi.ConnectionManager
implementation for non-managed uses of the adapter. Consequently, their
adapter cannot be used in a non-managed scenario.
* The javax.resource.cci.ConnectionFactory class does not support
the getConnection() method that does not take any arguments (it throws a
null pointer exception).
I am attaching the classes discussed above.
Cheers,
Chris
Torsten Friebe wrote:
> Hi,
>
> does anybody know where to get a trail version - if one exists - of IN-Q-MY
> application server or the resource adapter?
>
> Thanks, regards
> Torsten
>
> "Xavi" <[email protected]> schrieb im Newsbeitrag
> news:[email protected]...
>
>>Hi everybody,
>>
>>Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic
>>
> server
>
>>?
>>
>>It works well with INQMY server, but with BEA I'm getting a lot of
>>
> problems creating
>
>>the connections.
>>
>>Thanks in advance.
>>Xavi.
>>
>>
>
>
package wli.adapter.inqmy.sapr3.spi;
import java.io.Serializable;
import javax.resource.ResourceException;
import javax.resource.cci.Connection;
import javax.resource.cci.ConnectionSpec;
import javax.resource.spi.ConnectionManager;
import javax.resource.spi.ConnectionRequestInfo;
import javax.resource.spi.ManagedConnection;
import javax.resource.spi.ManagedConnectionFactory;
import com.inqmy.r3adapter.R3ConnectionSpec;
import com.inqmy.r3adapter.R3ManagedConnectionFactory;
* Extends the In-Q-My implementation to allow for getConnection() with no
* connection spec, i.e. use the default configured connection parameters.
public class R3ConnectionFactory
extends com.inqmy.r3adapter.R3ConnectionFactory
implements com.bea.connector.IProxyMarker {
private R3ConnectionSpec m_cspec;
public R3ConnectionFactory(ConnectionManager cm, R3ManagedConnectionFactory mcf)
throws ResourceException {
super(cm, mcf);
String strClientNumber = mcf.getClientNumber();
if (strClientNumber == null) {
throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+mcf);
String strLanguage = mcf.getLanguage();
if (strLanguage == null) {
throw new javax.resource.spi.IllegalStateException("Language not set for "+mcf);
String strUserName = mcf.getUserName();
if (strUserName == null) {
throw new javax.resource.spi.IllegalStateException("UserName not set for "+mcf);
String strPassword = mcf.getPassword();
if (strPassword == null) {
throw new javax.resource.spi.IllegalStateException("Password not set for "+mcf);
m_cspec = new R3ConnectionSpec(strClientNumber, strLanguage, strUserName, strPassword);
public Connection getConnection(ConnectionSpec connectionSpec)
throws ResourceException {
if (connectionSpec == null) connectionSpec = m_cspec;
return super.getConnection(connectionSpec);
package wli.adapter.inqmy.sapr3.spi;
import java.io.Serializable;
import javax.resource.ResourceException;
import javax.resource.spi.ConnectionManager;
import javax.resource.spi.ConnectionRequestInfo;
import javax.resource.spi.ManagedConnection;
import javax.resource.spi.ManagedConnectionFactory;
* Extends the In-Q-My implementation to over-ride the
* allocateConnection method to return a CCI connection vs. a ManagedConnection
public class R3DefaultConnectionManager
implements ConnectionManager, Serializable {
public R3DefaultConnectionManager() {}
public Object
allocateConnection(ManagedConnectionFactory mcf, ConnectionRequestInfo cri)
throws ResourceException {
ManagedConnection mc = mcf.createManagedConnection(null, cri);
return mc.getConnection(null, cri);
package wli.adapter.inqmy.sapr3.spi;
import javax.resource.spi.ConnectionManager;
import javax.resource.spi.ConnectionRequestInfo;
import javax.resource.spi.ManagedConnection;
import javax.security.auth.Subject;
* Extends the In-Q-My implementation to get around some problems encountered
* while running on WebLogic:
* <ul>
* <li>Must over-ride default implementation of equals and hashCode method</li>
* <li>Needed to provide my version of the CCI ConnectionFactory</li>
* <li>Needed to provide my version of the default ConnectionManager for the
* non-managed scenario use case</li>
* </ul>
public class R3ManagedConnectionFactory
extends com.inqmy.r3adapter.R3ManagedConnectionFactory {
private int m_iHashCode;
transient private com.inqmy.r3adapter.R3ConnectionRequestInfo t_cri = null;
public R3ManagedConnectionFactory() {
super();
java.rmi.server.UID uid = new java.rmi.server.UID();
m_iHashCode = uid.hashCode();
public Object createConnectionFactory() {
// need to install our own default connection manager because In-Q-My
// version causes a ClassCastException in CCI ConnectionFactory
// getConnection
return createConnectionFactory(new R3DefaultConnectionManager());
public ManagedConnection createManagedConnection(Subject subject, ConnectionRequestInfo cri)
throws javax.resource.ResourceException {
// need to check for null on the ConnectionRequestInfo object because the
// In-Q-My R3ManagedConnection ctor does not check for null
if (cri == null) cri = getDefaultConnectionRequestInfo();
return new com.inqmy.r3adapter.R3ManagedConnection(this, subject, cri);
public Object createConnectionFactory(ConnectionManager connectionManager) {
// need to supply a connection factory that can deal with getConnection
// that does not take a ConnectionSpec
try {
return new R3ConnectionFactory(connectionManager, this);
} catch (javax.resource.ResourceException re) {
re.printStackTrace();
throw new java.lang.IllegalStateException(re.getMessage());
com.inqmy.r3adapter.R3ConnectionRequestInfo getDefaultConnectionRequestInfo()
throws javax.resource.spi.IllegalStateException {
if (t_cri == null) {
String strClientNumber = this.getClientNumber();
if (strClientNumber == null) {
throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+this);
String strLanguage = this.getLanguage();
if (strLanguage == null) {
throw new javax.resource.spi.IllegalStateException("Language not set for "+this);
String strUserName = this.getUserName();
if (strUserName == null) {
throw new javax.resource.spi.IllegalStateException("UserName not set for "+this);
String strPassword = this.getPassword();
if (strPassword == null) {
throw new javax.resource.spi.IllegalStateException("Password not set for "+this);
t_cri = new com.inqmy.r3adapter.R3ConnectionRequestInfo(strClientNumber, strLanguage, strUserName, strPassword);
return t_cri;
public boolean equals(Object obj) {
if (obj == null) return false;
if (obj == this) return true;
if (!this.getClass().isInstance(obj)) return false;
R3ManagedConnectionFactory mcf = (R3ManagedConnectionFactory)obj;
return compare(getClientNumber(), mcf.getClientNumber()) &&
compare(getLanguage(), mcf.getLanguage()) &&
compare(getUserName(), mcf.getUserName()) &&
compare(getPassword(), mcf.getPassword()) &&
compare(getServerName(), mcf.getServerName()) &&
compare(getSystemNumber(), mcf.getSystemNumber());
protected final boolean compare(final Object obj1, final Object obj2) {
if (obj1 == obj2) return true;
if (obj1 != null) {
return obj1.equals(obj2);
} else {
if (obj2 == null) {
return true;
} else {
return false;
public int hashCode() { return m_iHashCode; }
-
Archiving: experience with Oracle's Archive Adapter for SAP
All,
Does anyone have experience to share about Oracle's "Content Database Archive Adapter for SAP Applications"?
Thanks
GuentherSasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required. -
Oracle Adapter for SAP that supports Integration with SAP 6.0??
Hi,
I am working currently with Oracle Adapter for SAP with SAP 4.6.
But my company is looking for upgrading the Enterprise SAP system to 6.0.
Do we have Oracle Adapter for SAP that supports SAP 6.0? Please let me know if anyone has already worked on this?
Thanks,
Sasi BhushanSasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required.
Maybe you are looking for
-
Mouse Clicks/Positons in Pictures!
Even a guru learns new things... I just discovered the use of a picture control/indicator to detect mouse positions and clicks! What a wonderful thing. I have LabVIEW 6.0.2, and have, up to now, not known about this. To all those out there who I reco
-
Our RS232-enabled instrument sends ASCII strings to COM 1 and I read strings in. For example I get the string "TPM", or at least it looks like "TPM" if I display it. However, if I send that to the selector input of a Case structure, and create a case
-
Socket connection access denied
I created a class that handles all the socket level calls for my Applet class. When I'm trying to open the socket, I get an exception saying "access denied (java.net.SocketPermission 172.16.11.63:3333 connect,resolve)". When I open the socket within
-
Hi , Just recently we have changed the source system clients in our development environment. When I executed infopackage PSA was filled with data , where as infopackage stays in yellow status and later turns red. When I look in ERP , in SM58 , the
-
Managing cookies in Safari 3.1.2
I am having trouble getting to my cookie information in Safari. I know I am supposed to click on Safari, then preferences and then security but I don't have anything that says security. The only window that comes up when I click on preferences is one