XI BPM : Help Needed

Hi All,
I am passing internal table from SAP R3 to sapXI ( BPM ).
It has aroud 2000 records. Now i want to pass these records to the legacy system synchronously in the batch of 200 records.
So how do i proceed? I mean how do i loop at the internal table in bpm?
Please do the needful.
Smita.

Hi,
You can achieve this with the help of ABAP proxy. Your bpm Collect pattern will be collect based on the Message.(Message Dependent Loop)
So you will be having Sender ABAP proxy which will send two messages to XI.
1) Actul Data with 200 records
2) Stop message to indicate the BPM that this message is last one.
In the BPM it works with the concept of Fork and it will keep on recieve two messages. WHen you get stop message it will come out from Fork step and write into File. Till stop message , your BPm will keep on collect all the messages.
And in configuration you will be having 3 receiver determinations.
1) Actual data to BPM ( ABAP proxy to BPM)
2) Stop Message to BPM(ABAP proxy to BPM)
3) BPM to legacy system
To more on this-
http://help.sap.com/saphelp_nw2004s/helpdata/en/84/e8763c997fda50e10000000a11405a/frameset.htm - here you go t oIntegration Proces(ccBPM)->Examples and Useage Cases->Example: Collecting and Bundling Messages - One Interface from the left menu
Hope this helps,
Regards,
Moorthy

Similar Messages

How to add Two Interface Mappings to One Receiver(BPM) Help needed urgently

I have a requirement where i get a flat file and split into multiple files and send to BPM.
For each split file I created Interface Mapping using Java Mapping Program.
In the Configuration how to add more Interface Mappings?
Thanks for your help in advance.
Regards
Sudha

You can use Enhanced Interface Determination to split one message to Multiple hence to multiple Interfaces.
You have to change the Occurance of Messages in Message Mapping and their Corresponding Interfaces in Interface Mapping. That would create Multiple Files with Multiple Interfaces to Receiver (BPM)
1) You need not to use Multilpe Interface Mapping
2) You will use Extended Interface Determination for this.
regards.
Jeet.

BPM help needed

Hi,
When I am using BPM, I am getting this message in SXMB_MONI of PI
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
The scenario is async proxy->PI->Web service
Thx
Mike

Did you:
1) IMport the BPM from IR into ID and your BPM is active in both IR and ID?
2) Did you configure all the ID objects for this scenario?
3) Did you check in SXI_CACHE that your BPM is present and the Return Code for this BPM is 0 .... if not 0 then perform Re-Activation (match-stick symbol in SXI_CACHE itself)
After confirming perform testing and let us know.
Regards,
Abhishek.

BPM Help

Hi everyone. I found this document
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c">Step-By-Step Approach for Implementing XI Scenarios</a>
and i'm trying to make the last exercise of the document (3 FILE TO DATABASE USING BPM), but i got an error when i try to compile the IM object. The error is:
Activation of the change list canceled Check result for Interface Mapping IM_CustomerDetails_Async_ABS_TO_DBCustomerProc_req_ABS | http://infosys.com/demo/FILE_scenario: The abstract interface Message Interface DBCustomerProc_req_ABS | http://infosys.com/demo/DB_scenario has a software component version DB_WORKSHOP, 100 of <vendor>, which is different to the software component version FILE_WORKSHOP, 100 of <vendor> of the interface mapping. If there is an interface mapping in the business process, the abstract interfaces must be in the same software component version as the interface mapping Check result for Interface Mapping IM_DBCustomerProc_res_ABS_TO_DBStatus_Async_ABS | http://infosys.com/demo/FILE_scenario: The abstract interface Message Interface DBCustomerProc_res_ABS | http://infosys.com/demo/DB_scenario has a software component version DB_WORKSHOP, 100 of <vendor>, which is different to the software component version FILE_WORKSHOP, 100 of <vendor> of the interface mapping. If there is an interface mapping in the business process, the abstract interfaces must be in the same software component version as the interface mapping Check result for Message Mapping MM_DBCustomer_mt_response_To_DBStatus_mt | http://infosys.com/demo/FILE_scenario
I can see that the log tell me i should have all my Abstract Interfaces in the same SC, but i follow every single step of the tutorial and this tutorial don't follow that rule.
Have someone done this tutorial?
Would someone help me? please.

HI Sergio,
nice to meet you here. I just send an Email with the solution, but i'll repeat it here for everyone:
<i>In BPM all interfaces used need to lay in the same software component. As we normally have two different software components of sender and receiver, we need to create a based on relationship between these two components. In detail: the component in which the BPM lays needs to be based on the second software component from which objects are used.
1. To define such a relationship go to SLD and select your BPM Software Component Version.
2. Click on Usage Dependencies.
3. Click on Define Dependencies
4. Select Context "Installation Time" and your software component version
5. Click Create
After that you need to update the information in the repository using menu Tools --> Transfer from SLD --> Update Application Components.
As a result you should see "Basis Objects" Entry in your BPM Software Component and under this entry listed all your interface objects of the other software component.
Now update all your interfaces in BPM and Mappings by dragging and dropping the same objects but from under the Basis Objects tab instead of from the other software comp.
If you check your BPM via F7, you'll also get the error messages as during activation, so you're able to check which references still need to be updated without activating it.</i>
Best regards
Christine<i></i>

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIE

In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Help needed! Raid degraded again!

Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!

I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed in Finding Download location for Sun One Portal 7

Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AM

try edelivery.oracle.com under sun products.

Help needed in constructing a tree

Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
Please suggest me how to add the arrays to second column for parent and child nodes.
Solved!
Go to Solution.
Attachments:
Tree_fix.vi ‏15 KB

The Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Help needed on CD740 ???

Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
Thanx.

I tried compling servlet, but it is raising error
that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)

XI BPM : Help Needed

Similar Messages

Maybe you are looking for