XI calling an Oracle Stored Procedure which returns an Object to XI

I am currently trying to call an Oracle Packaged/Procedure from XI which accepts a couple of parameters as I/O and returns an Object as one of the parameters.
I have created the Object within the Oracle Database CREATE OR REPLACE TYPE xy_jdbc AS OBJECT
column_name type ...etc
CREATE OR REPLACE TYPE xy_tab_jdbc AS TABLE OF xy_jdbc;
One of the parameters for the stored procedure is set up as this type xy_tab_jdbc this will be populated based upon one of the parameters passed into the Package/Procedure.
Is this possible? If it is, how do I map the returned object within XI?

Dear Hilary,
the JDBC adapter does not support vendor-specific or non-scalar data types.
Workaround: Change the stored proc's signature not to use an object, but the object's fields instead.
Regards,
Thilo

Similar Messages

Calling a Oracle Stored Procedure which will take a while to complete

Hey.
I'm calling a Oracle stored procedure which goes of and do a whole lot of things and therefore takes a fair while to complete.
Currently I am doing this:
String sql = "begin concorde.start_transfer(); end;";
HibernateUtil.getSessionFactory().openStatelessSession().connection().prepareCall(sql).execute();
....Where HibernateUtil is just a mean to get to the SessionFactory. The connection I get is the same one as a JDBC, I think.
I would want to regain control of the application as soon as the procedure is called and continue with the rest of the logic.
How do I do that? Do I have to initiate it from a different thread?
Thanks

If it was me I wouldn't have a stored proc that took a while to complete. Instead I would submit a job to job queue. In terms of implementation I would call a proc that writes a record to a table. Then a process in the database polls that table and runs jobs it finds there. Then reports results somewhere.
Sometime later you collect the results.
But without that then the solution in java is obvious - create a thread.

Call to Oracle stored procedure that returns ref cursor doesn't work

I'm trying to use an OData service operation with Entity Framework to call an Oracle stored procedure that takes an number as an input parameter and returns a ref cursor. The client is javascript so I'm using the rest console to test my endpoints. I have been able to successful call a regular Oracle stored procedure that takes a number parameter but doesn't return anything so I think I have the different component interactions correct. When I try calling the proc that has an ref cursor for the output I get the following an error "Invalid number or type of parameters". Here are my specifics:
App.config
<oracle.dataaccess.client>
<settings>
<add name="PGDATA_WC.ODATAPOC.GETWORKORDERSBYWINDFARMID.RefCursor.P_RESULTS" value="implicitRefCursor bindinfo='mode=Output'" />
<add name="PGDATA_WC.ODATAPOC.GETWORKORDERSBYWINDFARMID.RefCursorMetaData.P_RESULTS.Column.0" value="implicitRefCursor metadata='ColumnName=WINDFARM_ID;BaseColumnName=WINDFARM_ID;BaseSchemaName=PGDATA_WC;BaseTableName=WORKORDERS;NATIVEDATATYPE=Number;ProviderType=Int32'" />
<add name="PGDATA_WC.ODATAPOC.GETWORKORDERSBYWINDFARMID.RefCursorMetaData.P_RESULTS.Column.1" value="implicitRefCursor metadata='ColumnName=STARTTIME;BaseColumnName=STARTTIME;BaseSchemaName=PGDATA_WC;BaseTableName=WORKORDERS;NATIVEDATATYPE=Varchar2;ProviderType=Varchar2'" />
<add name="PGDATA_WC.ODATAPOC.GETWORKORDERSBYWINDFARMID.RefCursorMetaData.P_RESULTS.Column.2" value="implicitRefCursor metadata='ColumnName=ENDTIME;BaseColumnName=ENDTIME;BaseSchemaName=PGDATA_WC;BaseTableName=WORKORDERS;NATIVEDATATYPE=Varchar2;ProviderType=Varchar2'" />
<add name="PGDATA_WC.ODATAPOC.GETWORKORDERSBYWINDFARMID.RefCursorMetaData.P_RESULTS.Column.3" value="implicitRefCursor metadata='ColumnName=TURBINE_NUMBER;BaseColumnName=TURBINE_NUMBER;BaseSchemaName=PGDATA_WC;BaseTableName=WORKORDERS;NATIVEDATATYPE=Varchar2;ProviderType=Varchar2'" />
<add name="PGDATA_WC.ODATAPOC.GETWORKORDERSBYWINDFARMID.RefCursorMetaData.P_RESULTS.Column.4" value="implicitRefCursor metadata='ColumnName=NOTES;BaseColumnName=NOTES;BaseSchemaName=PGDATA_WC;BaseTableName=WORKORDERS;NATIVEDATATYPE=Varchar2;ProviderType=Varchar2'" />
<add name="PGDATA_WC.ODATAPOC.GETWORKORDERSBYWINDFARMID.RefCursorMetaData.P_RESULTS.Column.5" value="implicitRefCursor metadata='ColumnName=TECHNICIAN_NAME;BaseColumnName=TECHNICIAN_NAME;BaseSchemaName=PGDATA_WC;BaseTableName=WORKORDERS;NATIVEDATATYPE=Varchar2;ProviderType=Varchar2'" />
<add name="PGDATA_WC.ODATAPOC.GETWORKORDERSBYID.RefCursor.P_RESULTS" value="implicitRefCursor bindinfo='mode=Output'" />
</settings>
OData Service Operation:
public class OracleODataService : DataService<OracleEntities>
// This method is called only once to initialize service-wide policies.
public static void InitializeService(DataServiceConfiguration config)
// TODO: set rules to indicate which entity sets and service operations are visible, updatable, etc.
// Examples:
config.SetEntitySetAccessRule("*", EntitySetRights.All);
config.SetServiceOperationAccessRule("GetWorkOrdersByWindfarmId", ServiceOperationRights.All);
config.SetServiceOperationAccessRule("CreateWorkOrder", ServiceOperationRights.All);
config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2;
[WebGet]
public IQueryable<GetWorkOrdersByWindfarmId_Result> GetWorkOrdersByWindfarmId(int WindfarmId)
return this.CurrentDataSource.GetWorkOrdersByWindfarmId(WindfarmId).AsQueryable();
[WebGet]
public void CreateWorkOrder(int WindfarmId)
this.CurrentDataSource.CreateWorkOrder(WindfarmId);
Here is the stored procedure:
procedure GetWorkOrdersByWindFarmId(WINDFARMID IN NUMBER,
P_RESULTS OUT REF_CUR) is
begin
OPEN P_RESULTS FOR
select WINDFARM_ID,
STARTTIME,
ENDTIME,
TURBINE_NUMBER,
NOTES,
TECHNICIAN_NAME
from WORKORDERS
where WINDFARM_ID = WINDFARMID;
end GetWorkOrdersByWindFarmId;
I defined a function import for the stored procedure using the directions I found online by creating a new complex type. I don't know if I should be defining the input parameter, WindfarmId, in my app.config? If I should what would that format look like? I also don't know if I'm invoking the stored procedure correctly in my service operation? I'm testing everything through the rest console because the client consuming this information is written in javascript and expecting a json format. Any help is appreciated!
Edited by: 1001323 on Apr 20, 2013 8:04 AM
Edited by: jennyh on Apr 22, 2013 9:00 AM

Making the change you suggested still resulted in the same Oracle.DataAccess.Client.OracleException {"ORA-06550: line 1, column 8:\nPLS-00306: wrong number or types of arguments in call to 'GETWORKORDERSBYWINDFARMID'\nORA-06550: line 1, column 8:\nPL/SQL: Statement ignored"} System.Exception {Oracle.DataAccess.Client.OracleException}
I keep thinking it has to do with my oracle.dataaccess.client settings in App.Config because I don't actually put the WindfarmId and an input parameter. I tried a few different ways to do this but can't find the correct format.

How to execute an Oracle stored procedure which returns many records?

I have two synchronous scenarios XI<->PI<->JDBC, where JDBC is receiver adapter.
Each scenario runs a different stored procedure in Oracle database.
The first stored procedure returns only one record, the second stored procedure returns many records, which come from a cursor.
In the first scenario I executed the stored procedure following the directions of Help SAP page and works perfectly.
Link: [http://help.sap.com/saphelp_nw70/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm]
<root>
<StatementName5>
    <storedProcedureName action=u201DEXECUTEu201D>
      <table>realStoredProcedureName</table>
      <param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
    </storedProcedureName>
</StatementName5>
<root>
I have sought in the forums of SDN and cannot find the way to run the second stored procedure, and receive the information it returns.
Thank you for your help.
Rafael Rojas.

Think It doesnt matter either cursor or result set. Try to get the response back from JDBC and see what are the fields it exactly populating.
In Procedure you can able to find the columns selecting in Cursors. Give those columns in the DT.
File - JDBC (Execute-- Procedure)
To get the response
JDBC_respose - File
Correct me if im wrong.
Regards
Ramg

Calling a stored procedure which returns a value

Hi Friends,
I want to call a stored procedure which returns a value.
Eg
create or replace procedure xyz(a1 in varchar2, a2 in varchar2, z1 out number)
thanks

Hi,
use this.
declare
retval number;
begin
abc('aaa','bbb',retval);
dbms_output.put_line('retval is ' ||retval);
end;
--Basava.S

Using XI - RFC table and an Oracle stored procedure that returns a cursor.

I need to create an interface using XI between an RFC table and an Oracle stored procedure that returns a cursor. We are on oarcle 9.2 and SP12.
My stored procedure looks something like this:
CREATE OR REPLACE
PROCEDURE testproc_xi2 (p_recordset1 OUT SYS_REFCURSOR,
                                         in_quoteid IN varchar2 )
AS
BEGIN
OPEN p_recordset1 FOR
   SELECT q.quote_id,
                 q.modified_by,
                 q.quote_status,
                 q.total_cost
            FROM quote q
           WHERE q.quote_id = in_quoteid
             AND q.total_cost > 0 ;
END testproc_xi2 ;
My RFC has table and one import parameter .
I wanted to know how to create the data type for the ref cursor? and also for the table type in the RFC?
CAN XI handle multi rows coming from a Stored procedure? Are there any other alternative methods if this is not supported?Any pointers to this would be helpful.
I have called a Oracle SP from an RFC before, but that interface had one input parameter going to the stored procedure from the RFC and about 6 o/p parameters coming from the Stored procedure. This works fine.
Thanks for the help.
Mala

Mala,
i dont think there is anything called an rfc table...RFC stands for remote function call. That in essence would imply you need a rfc to jdbc connection.
yes XI can handle multiple rows cooming from the the stored procedure if you have them mapped appropriately.
Now as to how to create the data type within xi , you need to know what fields are going to be returned and whether they are nested and then just create them as you would for an xml
for ex
<Details>
<FirstName>
<LastName>
</Details>
that in xi would be smthing like
Details type of data occurence
FirstName type of data occurence
LastName type of data occurence.
Hope that helps.
If it does dont forget the points..:-)

Using a ORACLE stored procedure to return a query set.

I would like to call an ORACLE stored procedure from inside the Creator. The stored procedure returns the data in a hierarchical format. Is there an example of calling ORACLE stored procedures available?
Thanks for your help.
Charles

See this thread - might help:
http://swforum.sun.com/jive/thread.jspa?threadID=47188&tstart=0
v

How in ColdFusion with in variables get a Oracle stored procedure to return values?

How in ColdFusion with in variables get a Oracle stored procedure to return values?
We have tried several things, we can get a stored procedure to return a result set if we are not passing in variables but we cannot get them when we are passing in variables.
We know how to do it calling MS SQL.
Thanks for any help,
Nathan Sr
P.S. we have heard this may not be possible with the current Oracle Driver is there a different Oracle driver?

I can only barely understand what you're asking here (not from a technical perspective, but from understanding your written English), but I suspect you're wanting to know how to pass back values other than recordsets from Oracle?
You should be able to pass them back via a type=out proc param, shouldn't you?
If you could reword your post so it's a bit more coherent, and possibly post some code, that might help.
Adam

Calling Stored Procedure which returns single or multiple value

Hi All Experts,
I have written one stored procedure which is returning different
integer values according to condition.I am calling this
stored procedure through prepareCall() method then executeUpdate() method ,but it is always returning 1,not my desired value.
Pl also tell me,if my stored procedure returns more than one value
then how will i get those values in my java program?
Pl help by writing some sample code.
Thanx in Advance.
Pradipto

1) Create CallableStatement
2) For each of returning value you have to call RegisterOutParameter()
3) For others user setXXX() method depending on type of parameter
4) call
5) use vars registered through RegisterOutParameter() - all your values should be there
Pavel

Problem with calling a oracle stored procedure

Hi,
I am using the following callable statement to invoke a oracle stored procedure/function.
String myCallableStmt="{?=call IB_DDL.CREATE_DATASET(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}";
But I am getting the following errors which do not make sense to me
Exception in thread "main" java.lang.NullPointerException
     at oracle.jdbc.driver.T4C8Oall.getNumRows(T4C8Oall.java:870)
     at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:956)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1159)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3284)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3389)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4222)
     at org.jtdemo.CreateDataSet.callCreateDatasetProcedure(CreateDataSet.java:246)
     at org.jtdemo.Main.main(Main.java:29)
Can anyone help me here.
Thanks in advance
Kalyan

May be I have used the word "procedure" loosely. Its infact a oracle function which returns a message of type Varchar2. Hence "{?=.....} here is used for registering the return value from the function. The remaining statement CREATE_DATASET(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?), here the first 14 are input parameters whereas the last one is the OUT parameter of the function. Hope this helps. Anways I am pasting my code below...
CallableStatement cstmt = null;
          String myCallableStmt="{?=call IB_DDL.CREATE_DATASET(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}";
          try {
               System.out.print("Creating DataSet.......\n");
               cstmt = targetCon.prepareCall(myCallableStmt);
               cstmt.setObject("USER_ID_IN",this.USER_ID_IN);
               cstmt.setObject("TABLE_NAME_IN",this.TABLE_NAME_IN);
               cstmt.setObject("LAYOUT_IN",this.layoutCollection);
               cstmt.setObject("DATA_TABLESPACE_IN",this.DATA_TABLESPACE_IN);
               cstmt.setObject("INDEX_TABLESPACE_IN",this.INDEX_TABLESPACE_IN);
               cstmt.setObject("STRING_POOL_NAME_IN",this.STRING_POOL_NAME_IN);
               cstmt.setObject("NUMBER_POOL_NAME_IN",this.NUMBER_POOL_NAME_IN);
               cstmt.setObject("DATE_POOL_NAME_IN",this.DATE_POOL_NAME_IN);
               cstmt.setObject("LINK_POOL_NAME_IN",this.LINK_POOL_NAME_IN);
               cstmt.setObject("DATASET_LEVEL_CONSTR_TYPE",this.DATASET_LEVEL_CONSTR_TYPE);
               cstmt.setObject("DATASET_LEVEL_CONSTR_BODY",this.DATASET_LEVEL_CONSTR_BODY);
               cstmt.setObject("POOLING_IN",this.POOLING_IN);
               cstmt.setObject("SEGMENTATION_IN",this.SEGMENTATION_IN);
               cstmt.setObject("DATASET_PARTITIONING_IN",this.DATASET_PARTITIONING_IN);
               cstmt.registerOutParameter("DATASET_ID_OUT",OracleTypes.INTEGER);
               cstmt.registerOutParameter("RETURN_MESSAGE",OracleTypes.VARCHAR);
               cstmt.execute();
               String returnMessage = (String)cstmt.getObject("RETURN_MESSAGE");
               System.out.print(returnMessage);
          }catch(SQLException e) {
               e.printStackTrace();
          }

Problem with output data when calling into Oracle stored procedure

I have a problem that I think I've seen posted by others, but I can't find it anywhere on the forum. Here's what it looks like:
I have a application that sends a query parameter called custID in a URL to a JSP page.
http://domain.com/decrypt.jsp?custID=ewsw
The JSP subsequently calls into the method below to run a decryption stored procedure on an Oracle db. The custId parameter works fine from most clients. However, I have seen the decryption stored procedure return invalid information on some clients in the following case:
http://domain.com/decrypt.jsp?custID='eirwx
Here is how I define my call to the DCUSTID (decryption stored procedure):
public long dCustID(String sCustID)throws SQLException {
CallableStatement cs = null;
try {
long nCustID = 0;
if(conn == null || conn.isClosed()) {getLocalConnection();}
String sp = "BEGIN DCUSTID(?,?);END;";
cs = conn.prepareCall(sp);
cs.setString(1, sCustID);
cs.registerOutParameter(2,java.sql.Types.NUMERIC);
cs.execute();
nCustID = cs.getLong(2);
return nCustID;
}finally { release(cs); }
I have not been able to find a problem with the stored procedure (although Im not counting that out). Is there any way that the jsp or the code above is corrupting the data before it gets to the stored procedure? I'm very suspicious of the single quote at the begining of the custID query string parameter.
Thanks

>
The JSP subsequently calls into the method below to
run a decryption stored procedure on an Oracle db.
The custId parameter works fine from most clients.
However, I have seen the decryption stored procedure
e return invalid information on some clients in the
following case:
The back tick doesn't matter.
How do you know that the routine that you posted returns invalid information? Are you printing the value retreived before you return in the code that you posted? That is the only way to tell if that code is the problem vs some translation problem in something else.
And what do you mean by 'invalid'? It does return a numeric value right? Is it negative? Or so large that it couldn't be a key? Or what?
The input parameter to the stored proc is a varchar and not a char correct?

Calling an Oracle stored procedure and retrieving result from OUT parameter

Hello,
I have a stored procedure that returns a string in an OUT parameter after receiving 6 IN parameters. I have tested the procedure in PL/SQL and it's producing the right output there. The problem is when I call the stored procedure from my Java method. I then get an error message telling me that I have the wrong number or types of arguments in my procedure call. I have checked that the method receives and sends the correct data in the correct order and I'm not sure what else the error message can relate to...?
The exception is called on my second try statement but I haven't been able to find out what I have done wrong there. Does anyone have any suggestions? Thanks.
the error message
java.sql.SQLException: ORA-06550: line 1, column 13: PLS-00306: wrong number or types of arguments in call to 'P_SET_GIVEN_ANSWER' ORA-06550: line 1, column 7: PL/SQL: Statement ignored
the procedure
CREATE OR REPLACE PROCEDURE p_set_given_answer(
strfeedback OUT VARCHAR2,
intpi_id IN INTEGER,
intquestion_id IN INTEGER,
intgivenanswer IN INTEGER,
strgivenprefix IN VARCHAR2,
strgivenunit IN VARCHAR2,
strgu_id IN VARCHAR2) AS
-- some declarations
BEGIN
-- some processing and then returns the string below indicating the outcome
strfeedback = 'result';
END
the java method (the class is called dbUtil and the database connection is created in the method called getDbConnection() )
public void setGivenAnswer(int intPi_id, int intQuestion_id, int intGivenAnswer, String strGu_id, String strGivenPrefix, String strGivenUnit) {
java.sql.Connection con = null;
String query = "{call ? := p_set_given_answer(?,?,?,?,?,?)}";
try {
con = dbUtil.getDbConnection();
} catch(Exception e) {
dbConnectionExceptionMessage = "error 1:"+e.toString();
try{
CallableStatement stmt = con.prepareCall(query);
// register the type of the out param - an Oracle specific type
stmt.registerOutParameter(1, OracleTypes.VARCHAR);
// set the in params
stmt.setInt(2, intPi_id);
stmt.setInt(3, intQuestion_id);
stmt.setInt(4, intGivenAnswer);
stmt.setString(5, strGivenPrefix);
stmt.setString(6, strGivenUnit);
stmt.setString(7, strGu_id);
// execute the stored procedure
stmt.execute();
// retrieve the results
strFeedback = stmt.getString(1);
} catch (java.sql.SQLException e) {
dbConnectionExceptionMessage = "error 2:"+e.toString();
try {
con.close();
} catch (java.sql.SQLException e) {
dbConnectionExceptionMessage = "error 3:"+e.toString();
----------------------------------------

Looks like you are declaring a procedure, but you are calling it like a function. A procedure has no return value, it has only parameters: "{call p_set_given_answer(?,?,?,?,?,?,?)}"

How Do I Call PL/SQL Stored Procedure That Returns String Array??

I Have Problem Calling An Oracle(8i) Stored Procedure That Returns Array Type (Multi Rows)
(As Good As String Array Type..)
In This Fourm, I Can't Find Out Example Source.
(Question is Exist.. But No Answer..)
I Want An Example,, Because I'm A Beginner...
(I Wonder...)
If It Is Impossible, Please Told Me.. "Impossible"
Then, I'll Give Up to Resolve This Way.....
Please Help Me !!!
Thanks in advance,

// Try the following, I appologize that I have not compiled and run this ... but it is headed in the right direction
import java.sql.*;
class RunStoredProc
public static void main(String args[])
throws SQLException
try
Class.forName("oracle.jdbc.driver.OracleDriver");
catch(Exception ex)
ex.printStackTrace();
java.util.Properties props = new java.util.Properties();
props.put("user", "********"); // you need to replace stars with db userid
props.put("password", "********"); // you need to replace stars with userid db password
// below replace machine.domain.com and DBNAME, and port address if different than 1521
Connection conn =
DriverManager.getConnection("jdbc:oracle:thin:@machine.domain.com:1521:DBNAME", props);
// replace "Your Stored Procedure" with your stored procedure
CallableStatement stmt = conn.prepareCall("Your Stored Procedure");
ResultSet rset = stmt.execute();
while(rset.next())
System.out.println(rset.getString(1));

Calling an Oracle stored procedure using Toplink API - Please help

Hi,
We are evaluating Toplink as a possible data access layer in large service-oriented application. The ability to call db stored procedures from within business object layer is crucial for our architechture.
I am trying to follow toplink application developer's guide examples on how to call stored procedures using toplink.
I have the folling java code:
call.setProcedureName("PR_ROMAN_TEST");
call.addNamedArgument("IN_PARAM");
call.addNamedOutputArgument("OUT_PARAM");
ValueReadQuery query = new ValueReadQuery();
query.setCall(call);
query.addArgument("IN_PARAM");
Vector params = new Vector();
params.addElement(new Integer(5));
Number result = (Number) session.executeQuery(query, params);
This generates the following SQL statement:
BEGIN PR_ROMAN_TEST(IN_PARAM=>5, OUT_PARAM=>?); END;
An attempt to execute it causes a
java.sql.SQLException: Invalid column index.
As I understand it, this exception is thrown because of the "?" in place of the out-parameter value holder.
The SQL statement that I would want toplink to generate and execute should look like:
DECLARE result number; BEGIN PR_ROMAN_TEST(IN_PARAM=>5, OUT_PARAM=>result); END;
, but how do I achieve it and how do I capture the return value, all using toplink api?
Please help
Thank you in advance,
Roman

I read the conversation above. I am running into a similar kind of problem. I get the following error.
<an exponent (**)> <> or != or ~= >= <= <> and or like between || The symbol "." was subs Error Code: 6550Local Exception Stack: Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle.toplink.exceptions.DatabaseException Exception Description: java.sql.SQLException: ORA-06550: line 1, column 38: PLS-00103: Encountered the symbol "NAME" when expecting one of the following:. ( ) , * @ % &' | = - + < / > at in is mod not range rem =>.. <an exponent (**)> <> or != or ~= >= <= <> and or like as between from using || The symbol "." was substituted for "NAME" to continue.ORA-06550: line 1, column 55: PLS-00103: Encountered the symbol "ID" when expecting one of the following:. ( ) , * @ % &' | = - + < / > at in is mod not range rem =>.. <an exponent (**)> <> or != or ~= >= <= <> and or like between || The symbol "." was subs Internal Exception: java.sql.SQLException: ORA-06550: line 1, column 38:PLS-00103: Encountered the symbol "NAME" when expecting one of the following . ( ) , * @ % &' | = - + < / > at in is mod not range rem =>.. <an exponent (**)> <> or != or ~= >= <= <> and or like as between from using || The symbol "." was substituted for "NAME" to continue.ORA-06550: line 1, column 55:PLS-00103: Encountered the symbol "ID" when expecting one of the following: . ( ) , * @ % &' | = - + < / > at in is mod not range rem =>.. <an exponent (**)> <> or != or ~= >= <= <> and or like between || The symbol "." was subs Error Code: 6550 at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:227)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:733)
at oracle.toplink.internal.databaseaccess.DatabasePlatform.executeStoredProcedureCall(DatabasePlatform.java:1605)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:649)
at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:506)at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(CallQueryMechanism.java:131)
at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(CallQueryMechanism.java:115)
at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(CallQueryMechanism.java:194)
at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelect(CallQueryMechanism.java:175)
at oracle.toplink.queryframework.DirectReadQuery.executeNonCursor(DirectReadQuery.java:65)
at oracle.toplink.queryframework.DataReadQuery.execute(DataReadQuery.java:73)
at oracle.toplink.queryframework.ValueReadQuery.execute(ValueReadQuery.java:59)
at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:493)
at oracle.toplink.queryframework.ReadQuery.execute(ReadQuery.java:125)
at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:1958)
at oracle.toplink.threetier.ServerSession.internalExecuteQuery(ServerSession.java:629)
at oracle.toplink.threetier.ClientSession.internalExecuteQuery(ClientSession.java:392)
at oracle.toplink.publicinterface.Session.executeQuery(Session.java:1086)
at oracle.toplink.publicinterface.UnitOfWork.internalExecuteQuery(UnitOfWork.java:2246)
at oracle.toplink.publicinterface.Session.executeQuery(Session.java:1086)
at oracle.toplink.publicinterface.Session.executeQuery(Session.java:1055)
at com.eplinc.common.persistence.toplink.TopLinkTemplate$2.readFromSession(TopLinkTemplate.java:181)
at com.eplinc.common.persistence.toplink.SessionReadCallback.doInTopLink(SessionReadCallback.java:59)
at com.eplinc.common.persistence.toplink.TopLinkTemplate.execute(TopLinkTemplate.java:110)
at com.eplinc.common.persistence.toplink.TopLinkTemplate.executeQuery(TopLinkTemplate.java:178)
at com.eplinc.common.persistence.toplink.TopLinkTemplate.executeQuery(TopLinkTemplate.java:172)
at com.epl.outletteller.dao.toplink.TopLinkOIDGeneratorDAO.generateId(TopLinkOIDGeneratorDAO.java:45)
The call I am making is as follows :
public long generateId(String name, long outletId) throws DataAccessException {
TopLinkTemplate tlTemplate = new TopLinkTemplate();
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("AUTONUM.GET_NEXT_VALUE");
call.addNamedArgument("autonum name");
call.addNamedArgument("outlet id");
call.addNamedOutputArgument("OUTPUT_1");
ValueReadQuery query = new ValueReadQuery();
query.setCall(call);
query.addArgument("autonum name");
query.addArgument("outlet id");
Object[] parameters = new Object[2];
parameters[0] = name;
parameters[1] = Long.toString(outletId);
Number uniqueNumber = (Number)tlTemplate.executeQuery(query,parameters);
return uniqueNumber.longValue();
This is my Table AUTONUM_SETTING
AUTONUM_NAME AUTONUM_TYPE START_VAL END_VAL INCREMENT_VALUE
TRAN_NUM GLOBAL 1 999999 1
TRACE_NUM OUTLET 1 999999 1
Any help would be appreciated. Thanks

Calling a Oracle stored procedure in orchestrator

I am trying to execute a stored procedure using the query database IP in orchestrator. I can select data from the oracle db so i know the prereqs are setup correctly but it fails on executing the stored procedure.
The syntaxe is execute SPNAME('PARAM!','PARAM2')
The error is
Failed, Oracle failure Database error has occurred. ORA-00900: invalid SQL statement
Oracle query failure, please verify your query syntax is correct. Verify correct table names and column names etc...
The SP works fine in sql developer so im pretty sure the syntax is correct unless the Query Database IP needs a different syntax to work.

simple as that. i actually tried something similar since that is how SCOM executes SP but left the execute command in there so it failed and i moved on. thanks for the reply.
Just for reference i went the powershell route and that worked as well but much more complicated then your solution. for anyone that wants to know the script is
$asm = [System.Reflection.Assembly]::LoadWithPartialName("System.Data.OracleClient")
$connectionString = "Data Source=TNSNAME;uid=USERID;pwd=PASSWORD";
$inputString1 = "PARAMETER INPUT 1";
$inputString2 = "PARAMETER INPUT 2"
$oracleConnection = new-object System.Data.OracleClient.OracleConnection($connectionString);
$cmd = new-object System.Data.OracleClient.OracleCommand;
$cmd.Connection = $oracleConnection;
$cmd.CommandText = "SP NAME";
$cmd.CommandType = [System.Data.CommandType]::StoredProcedure;
$cmd.Parameters.Add("NAME OF EXPECTED PARAMETER 1", [System.Data.OracleClient.OracleType]::NUMBER) | out-null;
$cmd.Parameters["NAME OF EXPECTED PARAMETER 1"].Direction = [System.Data.ParameterDirection]::Input;
$cmd.Parameters["NAME OF EXPECTED PARAMETER 1"].Value = $inputString1;
$cmd.Parameters.Add("NAME OF EXPECTED PARAMETER 2", [System.Data.OracleClient.OracleType]::VARCHAR2) | out-null;
$cmd.Parameters["NAME OF EXPECTED PARAMETER 2"].Direction = [System.Data.ParameterDirection]::Input;
$cmd.Parameters["NAME OF EXPECTED PARAMETER 2"].Value = $inputString2;
$oracleConnection.Open();
$cmd.ExecuteNonQuery() | out-null;
$oracleConnection.Close();
got help from http://dovetailsoftware.com/clarify/gsherman/2012/05/15/calling-oracle-stored-procedures-using-powershell/

XI calling an Oracle Stored Procedure which returns an Object to XI

Similar Messages

Maybe you are looking for