XI Communication Channel setting for MQ Cluster

Hi all,
I am looking for information related to communication channel settings to access a MQ cluster using JMS adapter. Please provide any helpfull links.
I want to know if this would be any different when XI interfaces with a MQ without clustering.
Thanks!

I don't know which cluster mechanism you have, but if you have 2 hostname you should think to a method to switch from a node to the other in easy way, deactivating one and activating the other (for instance with the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/45/0c86aab4d14dece10000000a11466f/frameset.htm">Controlling a Communication Channel Externally</a>)
I suggest you to verify how it will be in production instance: real cluster ? switch over ? virtual IP ?
Regards,
Sandro

Similar Messages

Custom Adapter - No content in Communication channel Monitoring for JCA

HI,
     We have developed a Custom Adapter for our client in XI with name JCA and it is working absolutely fine.
     Issue: We are not getting any entries in Communication Channel Monitoring for success or Error Messages.
     We have used Audit log for success or Failure entries and they are coming fine in Messaging System but there coule be a standard way to get entries in Channel Monitoring.
    Our client needs the entries in CC monitoring instead of Customised Audit Logs.
    Please help.
REgards,
Anurag Garg

HI Satish,
                 Thanks for answer. I am looking for this in Custom Adpater not in adapter module.
                 This log creates a trace File . Its not to do with getting messages in CC monitoring as we do get for File Adapter or other Adapters.
               Like- Message Successfully put into the queue.
                     - Successfully processed.
                 Such Messages are there in sample_ra. jar file code but they are not visible in CC Monitoring.
               I think some extra code needs to be added to activate this in Monitoring.
               Please suggest.
REgards,
Anurag Garg

Communication Channel types for e Filing GB

Hi radhika,
For e-Filing Outgoing process the configuration Scenario is PAYE_EOY_GB.
For e-Filing Incoming Process scenario is Employee_tax_code_update,
In these cases, GovernmentGateway is as sender for -Filing Incoming Process and is as receiver for e-Filing Outgoing process.
But at sender side what is the type of the communication channel weather File or SOAP or ?
At the receiver side what is the type of communication channel used in XI content template?
What type of system GovernmentGateway is?
Regards
Sreeni

Hi
The communication channel is http,
Check this link, which has all the documents related to e-filing
https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000081749&
especially this document shows creation of comm. channels also
XI Guide for setting up DPS
Regards
Vishnu

Communication channel parameters for XI receiver adapter

Hi
I am implementing a ABAP server proxy - to do this, I am creating a XI adapter type - Receiver communication channel so that messages from XI go to ---> the R3 system wherein the proxy is implemented.
I have seen a weblog with a sample defn of communication channel of this adapter type , but the illustration there is not clear enough.
Based on documentation for this in help.sap.com, I have the following questions :
1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
Any pointers on what am I missing here ??

Hi Karthik,
>>1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
Based on 'addressing type' field in XI adapter you can either specify HTTP destination in communication channel or provide all the required details in the communication channel itself.
>>2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
use the URL /sap/xi/engine?type=receiver
Also make sure that your R/3 is set up as a local integration engine for proxy communication..
Check this..
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Regards
Anand

Best wireless channel setting for desktop PC, PC l...

Hi
I have the latest BT infinity home hub for over a year. I have all those devices and computers listed in the subject. I have probelm getting wireless connection on all devices working at the same time.
My main problem was desktop PC wireless not working on channel 1. Spoke to technical support, tried Channel 7, desktop PC connection is fine, but it affected my iPhone and iPad connection. Appearently channel 1 and 11 are recommended channels, but still not working. Network interface setting 802.11 b/g/n. Now given up all manual channel setting, back to automatic setting. Now my desktop PC currently without wireless network - back to sqaure one !!!
If anyone has all or most these devices and computers connected same as me, and is working well, can you please let me know which channel you are using and other settings so I can try.
Thanks.
Solved!
Go to Solution.

Hi
Thanks for all your advice. As it is currently set to auto, when I checked this morning, it is set on Channel 6 (spot on!). My desktop PC wireless connection icon is showing "X" with no bars (like mobile signal) - meaning no connection, but when I check the browser and Outlook, everything seem to be working fine. All my i devices all working fine so far as well.
It seem be a happy ending for this! BT wanted to charge £30 for checking the devices!!!
Great community! Thanks!

Communication channels path For testing ?

For testing communication channels one path is there what is that path ?
There all adapters are there based on our adapter type we can click that adaper and check weather our communication channel is correct or not? i need that path.

Hi,
Yep, You can test & see all the Adapters those are up and running in the following path
1) goto Integration Builder by opening http://hostname:port/rep
2) Click on Runtime workbench
3) Click on Component monitoring
4) Click on Display
5) Click on Adapter Engine
6) Click on Communication channel monitoring
Here you are able to see all the Communication channels .......and you can check the error or success messages also....
Regards
Seshagiri

How many Communication Channels required for File--Bpm(SAP R/3)--File

Hi
 Pl..help me on this
 I am doing the following scenario File 2BPM 2 File
 i.e File -
BPM(ASync)
 BPM -
SAP R/3(Sync)
 SAP R/3 ---BPM (Sync)
 BPM ---File (Async)
 For me it looks three CC's but still i am not confident
 Can any one explain me on this
Adv thanx
Prasad K

File(CommChannel 1 -File Sender) -
> BPM(ASync)
BPM -
> SAP R/3(Sync) (CommChannel 2 - RFC Receiver)
SAP R/3(Comm Channel 3 -RFC Sender) --- > BPM (Sync)
BPM ---> File (Async)(CommChannel 4 - File Receiver)
So a TOTAL of 4 Comm Channels.
Since Sinchronous so 4 channels .. if you use idoc adapter instead of RFC 3 channels will do
Cheers,
Himadri
null

Best wireless channel setting for W610N

Hi there,
I just upgraded to fiber op internet and it was advertised that i can get 25mbps max. The laptop which i use on the main floor where the router is at is getting full upload and download speed by wireless but my laptop which i use up in my room is only getting half of thee speed n sometimes less... But once i brought my laptop down to the office right beside the router, i get the full speed so

If you are getting the speed when you are near the router, then you need an expander or a wireless repeater. I presume you get a low signal upstairs. Of course, speed directly proportional to your signal given that there are no significant interferences around.
There's no best wireless channel. You have to check which one is the best for your connection.

Using a variable in communication channel

Hi,
I have a lot of Communication Channels looking for files in the same directory. This directory's path will be changed soon and so I assume I'll have to change all my Communication Channels.
I was wondering whether there was a means of using a variable for the Source Directory in order to just have to change its value where it is defined and not every where it is used...
Regards
Yann

Hi,
Is this a sender file adapter? or a receiver file adapter?
You can make a change / make the receiver file adapter's directory dynamic by setting the value during runtime in the mapping.
Use this blog and the code in the blog to acheive this,
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Sender File adapter, I dont think this is possible.
Regards,
Bhavesh

Communication Channel in error

Communication Channel in error though the error has been resovled. New files are processed succesfully !!!
CC still in RED.
I tried the basic steps which can change the status .( by deactivating the channel and activating the same , stopped and started the same ) . It resulted the same.
Thanks,
Karthik

The information that is displayed for the status of a channel on the individual cluster nodes is status information that is accumulated to give the overall status of the channel in the table of communication channels.
If the cluster nodes have at least one status that is above all other statuses in the status hierarchy, the channel receives this status as the overall status. The possible statuses correspond to those in the table of communication channels and have the following hierarchy: (red), (yellow), (green), and (gray). A combination of green or yellow with gray is not possible.
○       The information displayed for the processing entries of the selected cluster node is current runtime information on message processing. You get to Message Monitoring by selecting the message ID displayed.
Depending on the adapter used, the type and occurrence of the information here can differ. The information forms the entry in the Processing Errors column in the table of communication channels. The newest result is taken from the table of the cluster nodes.
○       The information about channel administration displays when and by whom a channel was previously started or stopped. You can only start or stop a communication channel for an entire server cluster, not on individual cluster nodes. However, since errors can occur on individual cluster nodes during the execution of these actions, error information is also displayed for each cluster node.
○       If the channel is controlled by availability times, the Availability Times tab page is displayed. All other availability times that are relevant for this channel are also displayed. You can exclude specific availability times and, if necessary, reschedule them.
Since only active availability times are displayed, it is possible that availability times do exist for the selected communication channel even if none are displayed.
○       The information on the Settings tab page displays how often an attempt is made to send messages to this channel, and at what time intervals.
The default settings are taken from the outbound properties for the J2EE service SAP XI Adapter: XI. You can overwrite and save these values. You can also restore overwritten values.
Information about changes made to the settings is always displayed.
The Settings tab page is only relevant for receiver channels and is therefore only displayed for channels of this type.
regrads
chandra

Communication Channel Strange Behaviour

Hi,
We are facing a strange behaviour with communication channel monitoring in RWB for JMS Adapter.
I am sending data from IDoc to JMS. Message is processed successfully inside Integration Engine of PI.Message monitoring in RWB shows status successful.But ,if I monitor communication channel in RWB, under cluster node --> cluster node for Channel 'X' shows status green & in short log - I got an message "JMS message processed successfully at 2009-04-17|05:25:06+0100;JMS & XI identifiers are ID :414d515 & 457e345 respectively".
This information is always updated, when i run my interface & shows the latest three enteries there with information provided above in bold.
But if i see the processing details for Cluster node (Where we usually see the processing of message with its Message ID), there is no entry with Time Stamp & message ID & explanation.
Any idea why such a behaviour?
Thanks,
Venky

Hi,
hmmmm..........strange............
just check if you have multiple server nodes and you are selecting the server node with msg processing and then whether in processing details you are seeing your msgs or not............
also check if the msgs are processed just now or are processed some hours ago - if they are processed some hours ago then may be you do not have their processing details available currently but if they are processed just now, then you should be able to see their processing details..........
if the problem remains, then ask your basis guys to restart your XI J2EE engine and see if you then able to get processing details for your new msgs.........
Regards,
Rajeev Gupta

Regarding Integration Scenario and Communication Channel Template

Dear All,
1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
2.What is the purpose of creating Communication Channel Template in IR?
3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
Please clarify my doubts.Thanks in Advance.
Regards,
Ramana.

Hi Ramana,
1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
>>> For graphical overview about the sceanrio.It is not compulsary to create Integration Sceanrio.
2.What is the purpose of creating Communication Channel Template in IR?
>>> In integration scenario while creating the connection between two actions u need to specify the communication channel templates for Sender and Receiver.
3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
>>>You can utilize these templates in ID.After completion to creating the configuration sceanrio need to modify the parameters of the channels.
4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
>>> From Tools-->Transfer Integration sceanrio from Integration Repository, From input help choose the sceanrio,Continue and click on Finish ,with the same name the configuration scenaro will create in ID.You need to follow the Confiuration steps like Assign services , here need to choose u r source & target business systems and Configure Connections in this step you can cross check the interfaces,mapping,channel templates involved in this sceanrio and Generate. It would automatically generates Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination. It would shown to u Generation Log, here you can check what are the objects generated and if there are any errors it would shown Number of errors.
By setting the appropriate channel parameters, activate all objects from change list.Now u can able to test the sceanrio.
However in latest version it is not compulsoary to create Integration sceanrio in IR and to the above things.You can use Configuration Wizard to do all these things or you can do these mauvally.
Hope it will helps to clear u r doubts.
Cheers
Veera
>>>Reward points,if it is needful.

Need help in troubleshooting communication channel using soap adapter

Hello friends
I have a simple scenario.
I have created 2 communication channels, one for searching a record and another for updating it with a new value
Both uses SOAP as sender and RFC as receiver with a Standard BAPI.
Everything was working ok, but without any changes, all of a suddent I am not being able to update the values and when I checked RWB, I see for Update SOAP Adapter Channel, the messages say
Request received for a channel
but in a second it says 'Call Failed'.
I haven't made any changes.
I even tried restarting XI and ERP servers but still getting the same error.
Any suggestions or feedback will be greatly appreciated.
Thanks
Ram

THE PROBLEM WAS WITH A JOB GETTING HUNG IN THE QUEUE AND I HAD TO FORCIBLY KILL THAT. THAT TOOK CARE OF THE PROBLEM

How To Configure XI Receiver Communication Channel ?

Hi Expert,
I have a Scenario wherein i have 2 XI systems & i need to pass the messages between these 2 XI / PI system using XI Adapter. Can any body tell me how to configure the XI Adapter Step by Step. Is it required to Create the SM59 RFC destination with type H. Pl. Explain me in detailed.
Regards
Umesh

Hi Umesh,
In creating XI receover communication channel, you have 2 options for Addressing Type:
1. URL Address - no need to create RFC destination. You just have to specify the XI receiver host name, HTTP port, path (/sap/xi/engine?type=receiver), Authentication data (logon details for SAP Client number of the PI system).
2. HTTP Destination - create RFC destination in SXMB_ADM and specify the RFC destination name in your receiver communication channel.
For SAP documentation, see this link: http://help.sap.com/saphelp_nwpi711/helpdata/en/e1/091640a991c742e10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Jenny

AS2 Reciver Communication Channel error

Hi,
I am doing FILE to AS2 ...
I configured the Scenatio with Synchronous MDN , I have Created the Sender for MDN report too..
beow is my Error At AS2 reciver Communication Channel...
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE..
Thanks

Hi Tom,
This problem comes in SAP PI 7.1 version for resolving you require creation of extra configuration objects u2013
1. A sender AS2 communication channel with protocol as u201Ereports‟
2. A sender agreement using above communication channel.
For more information please refer Article (This will help you in configuring extra objects)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true
Regards,
Vikrant

XI Communication Channel setting for MQ Cluster

Similar Messages

Maybe you are looking for