XI Communication Channels does not poll

Hi All,
XI Communication Channels does not poll
Does anyone know how to troubleshoot this?
Actually they should pick the stuff from the SQL server, convert it to Idoc and send it to production BOX.
Shavali

Hi,
Is it a problem with the JDBC adapter?
If yes, make sure that the channel is active and that it has been started.
ALso , make sure that the sender JDBC adapter Select Query has some valid data and actually returns some rows!
Regards
Bhavesh

Similar Messages

Message Interface and Communication Channel are not getting in RW B

Hi
I have created a sceario in which i have created following things
2 - External Definition of Same XSD
2 - Data Types
2 - Message Types
4 - Message Interfaces
2 - XSLT mappings
2 - Interface Mapping
I have created on two scenario objects in XI ID.
But In RWB i can see only one sceario message interfaces and communication channels but the for other scenario MIs and Communication channels are not visible in RWB
I have created all the things in only one Namespace.
What could be the problem .please help me
Regards

Hi,
Have you activated it?
Can you see it in SXI_CACHE?
If one is no please run report SAI_CACHE_REFRESH
Kind regards,
Wojciech

Communication Channel is not working

I have moved the design and configuration from quality XI server to product XI server. But when I start the Communication Channel in RWB, the LED is green, and I cannot get the log details at log area. The communication Channel is file adapter for FTP. The ftp file cannot be picked up. In fact, communication Channel is not executed. I have check SLD for product, software, business system and Technical system, no error is found. Anyone can tell me the reason about that?

Li,
Things to check:
1. If you have adopted the file based transportation approach then you will loose configuration channel related data .
you need to feed the data.
2. If you have adopted the CMS transportation approach, then case will be different
a) Try to ping the FTP server from XI Prod Server, it should ping .
b) If it is showing green it means it is able to locate the FTP server, kindly check the file name once again....
Let us know the scenario also and also how the scenario is behaving differently
Note : File Name is case sensitive 1.xml is different from 1.XML
Regards,

Nokia communication center does not display persia...

nokia communication center does not display persian message correctly

My n85 got the same problems I got 3573 message in my inbox.. i am thinking to store the msg and reformat my phone.. but the NCC just show my MMS..
Solution:
I unplug the cable n restart the NCC connected with bluetooth. It show me text message.
New problems:
It only show up to 3252 message.
I want to store the message. I tried to store it in cvs form, but it doesn't record the time. vmg file does record the time But it need to store one by one
Is there any software can allow me to store all message to vmg, or other format that contain data like contact name, contact number, date and time?
Hydra..

VB6 NI-USB-9237 DAQmxCreateAIVoltageChan selected physical channel does not support the measurement type required

I have a VB6 program with code that properly reads analog inputs from an NI-USB-6008.
I tried to re-use the code for a strain-gage module NI-USB-9237, but at the DAQmxCreateAIVoltageChan step I get the following error:
"Measurements: Selected physical channel does not support the measurement type required by the virtual channel you are creating.
Create a channel of a measurement type that is supported by the physical channel, or select a physical channel that supports the measurement type."
Should I be calling a function other than DAQmxCreateAIVoltageChan?
If so, what is it, or where can I find the reference for such functions?
Or - if that is the right function, should I pass different arguments? Currently I'm calling:
DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default, -10, 10, DAQmx_Val_VoltageUnits1_Volts, "")
Thanks in advance for your help
-Chris Hardy
Solved!
Go to Solution.

I figured it out from 372251a.PDF
First, the correct function is DAQmxCreateAIVoltageChanWithExcit
Second, you can't just ask for one sample on one channel - ask for 2 samples instead.
-Chris Hardy

"The selected communication device does not exist"

Whenever I log on (or come out of sleeping), I get a prompt box from Internet Connnect that says "The selected communication device does not exist. Please verify your setting and try again". I think this started to happen when I stopped using a USB modem to access the internet. Recently I was again using a (different) USB modem, and when I stopped (I now have a wireless router), I now get TWO of the above alerts!
To be clear - I have no problem accessing and using the internet with the wirelss router I am using.
Is there a way of deleting historical communication devices I no longer use from Internet Connect that might stop this from happening?
Thanks in advance.
G4 iBook Mac OS X (10.4.8)

Hello Dunstan,
I wonder if this might have something to do with Location and Network settings.
I'd go to System Preferences/Network and, choosing the location that you are using, select the "modem" tab. On the presumption that, because you are now using wireless router and that your computer is no longer using its built-in modem, I'd delete all settings under "modem".
Then I'd open Internet Connect and see what crops up when you click on the Modem tab. It should be blank. If it is not, I'd close Intertet Connect, then go to My User Folder/Library/Preferences, and there move the following file to the Desktop: com.apple.internetconnect.plist. Open Internet Connect again.
There are other things that can be done, especially in the Locations settings. However, I'd try the above first.
Best of luck,
Martin
If you found that this contribution helped to answer your question, please consider the "Helpful" and "Solved" buttons in this message. Why reward points?
Powerbook 15-inch G4 1GHz Mac OS X (10.4.8) Several veterans that go on and on. 40gig, 3rd generation iPod

UWCMail Channel Does Not Open Message in Communications Express

Hello,
Our Communications Express Mail channel is not working as expected. When the user selects a mail message within the channel, a Communications Express window is opened, but the user's entire Inbox is shown, rather than the message they selected.
Does anyone know how to change this behaviour so that the actual message is opened?
Thanks a lot,
Tracy.

What is your operating system? Reader version?
mario augusto wrote:
just opens a window to choose in word files
Sorry, I don't understand that. Can you post a screenshot of that: https://forums.adobe.com/thread/1070933

Sender SFTP Adapter channel is not polling for files

Hello All,
Couple of SFTP sender adapter channel was failing in Developent system with u201Cdirectory listingu201D error.All SFTP sender channels stopped polling for the files in Developent system . We were unable to find the reason for adapter failure, Hence we restarted the j2ee server and adapter started polling files. Later we are facing the same issue in Quality system. THe adapter cahnnel is not polling files in Quality system even.
All lean tool adapters were showing the u201CHost key was not accepted erroru201D on 27th of Feb . As per the other channel trace, the time stamp of last successful polling and error time stamp of lean tool sender channels are exactly same
Eventhough two communication channels access the same SFTP adapter, one communicationchannel is getting 'Host key was not accepted error' but in other communication channel, files are getting picked.
Please let me know the solution if you have come accross this issue previously
Regards,
DilipKumar

Hi Mike,
Thanks for your reply.
Its not a standard SFTP adapter rather its a C-BURGER SFTP adapter.
Sorry I did not mention this in my previous post
Regards,
DilipKumar

Communication Channels do not appear in the monitor

I have just created a sender and receiver file adapter and activated them. I tested them in a process by dropping a file into the sender directory with a 10 second poll interval. The file is not being processed.
If I check the corresponding Integration Server Adapter Engine status, there is a green light, BUT When I select the Communication Channel Monitoring button, there are no channels!
Also, although I have created parties that use these channels, they also do not appear in the filter drop down list.
Is there some reason why these channels are not appearing?
Just for clarification; this is on a new XI installation.
Kind Regards,
Tony.

Hi,
import SAP basis software component into repository
as per question:
3. I can't see my adapters in the adater monitoring after the import of a new SP
on XI FAQ
for PI 7.0 - sap basis 7.0 for XI 3.0 sap basis 6.40
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

XI: Sender JDBC Communication Channel is not getting picked the records

Hi All,
Here I 'm facing an Issue with my sender JDBC communication Channel. Previously it was working fine but It is not Picking the records from the JDBC table.
Communication Channel is in active mode only.
I have checked in RWB communication Channel monitoring there i didn't get any error or success messages but channel is showing healthy status only(Green)
But i had created the new communication channel..with the same parameters which are in the older communication channel.. and sender agreement level also i had changed.. so now new channel is working fine.... I didn't understand what is the problem with previous communication channel.
Thanks

Hi yadav,
do you have TWO CCs polling at the same time via JDBC?
This could be the problem --> a conflict between both CCs.
Switch off ONE CC:
Regards Mario

Communication channel parameters not preserved on import

Hi gurus,
I noticed that on doing an export from dev and import into qa, i was not able to activate the imports as the parameters for server..etc in the communication channel were missing...is this routine.. or ..??
Any ideas...
Venkat

Hi,
While transporting we miss some parameters in QA or PRD there we have to again mention them.
check some links how to tranport.
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Regards,
Phani
Reward points if Helpful

File sender Communication Channel is not working

Hi friends
we Created File sender Communication Channel and Activated but It is not picking up file
1. 0 messages in Message Monitoring
2. My Communication Channel not appearing in Communication Channel Monitoring also
3. We have refreshed the cache and activated the channel.
we chack with File name, Directory name and path ....
Friends have any idea
Regards
   Viswanadh Vadde

Perosnally, I would recommend setting a trace and letting the system telling you exactly why.
Traces are used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments at class and method level. This is done with the help of the log configurator service:
Log onto the Java Admin Console
     Services
     Log Configurator
     Locations
     Choose the location (Java package) and the tracing level (severity)
(for example, com.sap.aii.adapter.file)
     Root Location > com > sap > aii > File
     Set the severity and choose Copy Severity to Subtree

File is getting picked up by Communication channel but not processed by XI

Hi,
I have a File to File scenario. The input csv file is getting picked by the sender communication channel but its not being processed by XI and thats why no entry is coming in sxmb_moni.
Then I think the message might getting stucked in the inbound que and it comes true. I delete all entries in smq2 but then again process the files but still it is not getting processed by XI rather the entry again came in inbound que.
Br,
Madan Agrawal.

Hi,
goto SXMB_ADM-Manage Queues-De-register
And Register again
Now trigger the scenario, it shld work
Also cross check with this Blog
/people/prasadbabu.nemalikanti3/blog/2006/02/13/configuration-of-a-central-integration-server
Regards
Seshagiri

Communication Channel Monitoring not showing up Communication Channels

Hi All,
PI 7.1 : I have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
And in ID I am getting below warning message for that Communication Channel.
Message: Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for Adapter Engine is missing in SLD.
Any idea? I appreciate your quick help.
Thanks,
Carl

Hi Abhishek,
I have selected inID , File dapater software component SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
Thanks,
Carl

Communication channels do not appear in RWB

Dear experts,
I am using PI 7.1, after creating some communication Channels for my scenarios, although they appear in the ABAP system (sxi_cache), they do not appear in the RWB.
And when i choose the menu Cache Status Overview in ID, it shows the error below:
"Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>"
Pls show me where i am wrong.
Thanks in advance.
Thien Duong.

Hi,
Refer these links:
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
/people/vikas.jain12/blog/2009/01/13/sld-self-registration-problems-and-troubleshooting
In PI 7.0
1. Re-import SAP BASIS SWCV 7.0 into Integration repository
2. Apply SAP Note 764176.
Regards,
Nithiyanandam

XI Communication Channels does not poll

Similar Messages

Maybe you are looking for