XI compared with IBM WBI

Hi all.
   Is there any articles which compare XI 3. and IBM WBI , especially in supporting RosettaNet ?
   I need it very urgently.
   Thanks a lot.

Hi Jianhong,
I am not sure about the IBM WBI but SAP BP for RosettaNet offers a comprehensive solution that addresses RosettaNet Standards. It offers pre-built, out-of-the-box message and process mappings between SAP Interfaces and RosettaNet PIP interfaces. With the RosettaNet BP SAP delivers technical adapters like RNIF, Mapping and Integration Processes and the business logic in the backend.
Hope this helps.
Rgds,
Sam Raju

Similar Messages

How does Oracle Database compare with IBM DB2?

Hi
thank you for reading my post
How Does ORACLE Database compare with IBM DB2 ?
Which one has better performance with similar workload?
Which one perform better on System Z hardware and z/OS?
Is there any document that compare these two product?
Thanks.

Hi
The below link may useful to you.
http://www.oracle.com/technology/deploy/availability/pdf/CWP_HA_Oracle10gR2_DB28.2.pdf
With best regards
Shan

Cisco Phone Control and Presence 8.6.1.1185 with IBM Lotus Notes 8.5.2 (Integrated Sametime Client 8.0.2) - No presence status visible

Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
     - Servers -> IP address of CUCM
     - Read Only -> unchecked
     - Use as Default CUCM -> checked
     - Synchronize Credentials -> checked
          - Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
     - Use Sametime Credentials -> checked
- Sametime User ID Mapping
     - Use Business Card Attribute -> MailAddress
     - Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
Igor

Hi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
     - Enable Phone Status -> active
     - Desk Phone Control -> active
     - no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
     - Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
     - LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor

SAP XI comparative with Cordys & TIBCO

Hi gurus,
Can anybody help me to find how SAP XI is better than Cordys or TIBCO .i.e. comparision between (SAP PI,Cordys,TIBCO)
regards,

HI
Sap XI:
       XI is well suited for connecting SAP systems with each other and with non-SAP. SAP XI provides an integrated workflow engine that allows defining adapters to non-XML protocols and mappings to convert data content from source to target format.
XI comes handy particularly incase of SAP - Non SAP interfaces where you can import standard integration content. Also XI has got sophisticated open standard adapter framework which is very easy to implement and custom logic can be implemented using Adapter module programming.
Advantages
u2022Monitoring is better than any other middleware product. It offers exhaustive monitoring features like message, performance, component monitoring etc, all of which can be used to track and rectify the errors. It follows a hub and spoke model.
u2022When you need to integrate with an SAP system XI has an advantage in supporting various SAP components and so on.
u2022Process functionalities inside XI to modify content in the communication channel on own defined rules for business purposes.
u2022Mappings and adapters are good as comparable with any other middleware product.
u2022Synchronous & Asynchronous communication is possible.
Dis-Advantages
u2022Web methods are particularly good if u have B2B kind of communication with their Trading Partners product.
u2022XI is lacking full-fledged Message Queue compared to other established Middleware products.
u2022It lacks in ability to process huge messages but SAP is working on that.
u2022It does not have a messaging layer exposed by APIs like IBM MQ-Series.
u2022It is not comparable to Tibco in terms of speed.
u2022SAP relies on other vendors except for a few adapters.
TIBCO:
       TIBCO is described as having the most advanced BPM features overall, spanning both integration-centric and human-centric features due to the company's aggressive strategy to sustain competitive advantage by adding leading-edge features, whether via internal development or strategic acquisition.
For the integration of custom applications into the e-business infrastructure, TIBCO makes available a comprehensive Software Development Kit that enables enterprises to build their own adapters.
Advantages
u2022Tibco has many adapters that are built by their own.
u2022Tibco simple and productive User Interface is much more matured than XI.
u2022Tibco does publish/subscribe very well. Available messaging types include request/reply, publish/subscribe and publish/reply interactions.
u2022Improves overall system performance by eliminating repetitive batch requests to packaged application systems.
u2022Lowers cost-of-ownership through general n-way rather than point-to-point integration.
u2022Simplifies administration with data transparency provided by subject-based naming.
u2022Enhances networked applications based on component or object development models.
u2022Choice of message delivery service levels for optimal resource utilization.
Dis-Advantages
u2022Tibco does not have asynchronous SOAP/HTTP.
u2022Concept of integration in terms of semantics and steps is a little more complex.
u2022When compared in terms of monitoring, message level trace, message resubmission, pipelining, components monitoring Tibco is far behind to XI.
cheers

Benefits of SAP Business Warehouse Reporting compared with the Query-tools?

Hello experts,
I've been creating reports with SAP Query tools, but been faced with few problems. First of all, there are restricted possibilities in terms of joining tables, and thus I cannot include all the data required for the report.
One solution for this would have been to create separate queries and join the data together in Excel. The problem with this is that there exists no common field that would make sense as for a selection criterion. If the selection criterion is different in different queries, there is the danger of combining false data together, which would eventually result with distorted data.
So I was wondering, could anyone briefly tell me if SAP Business Warehouse reporting would solve these problems? And what other benefits would it provide compared with the SAP Query? I'd urgently need to know if it would be a beneficial investment for the company, since I haven't found solutions for the problems occurred in the creation of reports.
Thank you in advance for you help!
Maria

The answers are yes - and thousands of companies have gone down this route
Puttingin BW is a strategic aim of the comapny and not to be thought about and discussed in a BI forum such as this
The costs of implementation and hardware will no doubt make your eyes water.
To be quite honest SAP BI is a "no brainer" as most of the new e-SOA and new R3 modules reply on BW for their reporting needs

I do not have many messages but my iphone 5s says messages take up 4.6GB of space. When comparing with friends who have many more message, less than 1 GB is being used on their phones. Why are mine taking up so much space and how do I correct that?

I do not have that many messages on my new iPhone 5s (maybe about 15 conversations and only one or two going back a little ways) yet when I go to Settings, Usage it shows that my messages are taking up 4.6GB of space. When comparing with others (some who have hundeds of messages) they are using under 1GB for their messages. Why are mine taking up so much space??

I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

What are new features in BCS 6.0 compared with earlier versions?

Hi,
What are new features in BCS 6.0 compared with earlier versions. Can someone tell in few lines .. just the summary and we can find the docs since it is not seen in service.sap.com.
Many thanks,
Regards,
Ricardo Ferrã

Hi Fancia Luo
You can find the file which is suggested by Dan is available in the below link
https://websmp105.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_KEY=501100035870000016962&_HIER_KEY=601100035870000210480&_HIER_KEY=601100035870000237998&_HIER_KEY=601100035870000238002&_HIER_KEY=701100035871000517655&
If the above link is not helpful. Please follow the complete path to find the specified file.
https://websmp105.sap-ag.de/sem ---> SAP ERP Financials --> Financial Close --> Business Consolidation --> Media Library --> Select Release Information. Under this you can find the file SEM BCS 747 - Overview and Positioning of New Features.
Regards
Rajesh SVN

Use a single variable value to compare with 2 characteristics

Hi guys
    I need some advice on how to use a single variable value to compare with 2 characteristics in a Infocube.
eg : I hv 2 characteristics in Infocube
       Launch date & Closing Date
   Now I want to display report where the variable date (inputted by user) is equal to Launch Date and Closing Date.
    with regards

Bobby,
if I right understood your situation, you have an input variable ZINPUT (related to a date 'A') and 2 others dates (yours Launch and Closing dates, 'B' and 'C').
You want to display only the rows where A(user input)=B=C.
Now you have to create 2 new variables (called ZB and ZC, related to B and C dates) NOT marked as 'ready for input' and set to 'mandatory variable entry'.
Call Transaction CMOD for the definition of the customer exit (if not already existing!).
Create a new project, maintain the short text, and assign a development class.
Goto Enhancements Assignments and assign RSR00001. Press the button components to continue.
Double-click on EXIT_SAPLRRS0_001. For documentation place the cursor on RSR00001 and use the menu Goto -> Display documentation.
Then double-click on ZXRSRU01. If the include doesnt exist you have to create it; assign a development class and a transport request.
Enter the coding:
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'ZB'.
(and you have to repeate the same code also for the variable 'ZC' !)
IF I_STEP = 2.
READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
WITH KEY vnam = 'ZINPUT'.
if sy-subrc = 0.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
endif.
L_S_RANGE-sign = 'I'.
L_S_RANGE-opt = 'EQ'.
append L_S_RANGE to e_t_range.
ENDIF.
ENDCASE.
Save and activate the coding and the project.
Now go to your query and use these two new variables to restrict B and C....et voilà !!!
Let me know if you need more help (and please assign points !!! be generous !!!)
Bye,
Roberto

I-trigue 3400 soundwoofer not working / right speaker low output compare with left speaker

Hi, basically i have 3 sets of creative i-trigue 3400 purchase as second hand. All these 3 sets have some minor problem. I trust my ability i able to repair it as iam a professional electronic engineer. Just need some advance information or guidance from creative big brother and sister.
i do check with the controller everything, because i have 3 sets so i able to verified the problem.
1)subwoofer not output----Is it problem with amplifier or any transistor damage? How do i start checking and verified it?
2)right speaker low output compare with left speaker----I already analysis it and would like to know is it the transistor prolem? Please let me know so i can start with my repairing.
From what i know, this model seem like going to discord soon, so is it possible send me a partial schematic on the 3400 so i can repair. Please let me know and reply me, i am waiting your answer. Thank you

seem like nobody reply my email, can creative technical provide some guide. I already mention i will repair myself.:angry:

Oracle 11.2.0.2g driver with IBM JRE(J2RE 1.5.0 IBM J9 2.3 Linux x86-32)

Hi All,
I am trying to use oracle 11.2 jdbc thin driver with IBM JRE and getting following exception messages.
Details from Ojdbc5.jar
Implementation-Version: 11.2.0.2.0
Repository-Id: JAVAVM_11.2.0.2.0_LINUX_100812.1
And Details from Java System Properties
java.vm.info: J2RE 1.5.0 IBM J9 2.3 Linux x86-32 j9vmxi3223-20060504 (JIT enabled)
J9VM - 20060501_06428_lHdSMR
JIT - 20060428_1800_r8
GC - 20060501_AA
java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.initialize(J9VMInternals.java:195)
at javax.crypto.Cipher.getInstance(Unknown Source)
at oracle.security.o5logon.O5LoginClientHelper.decryptAES(Unknown Source)
at oracle.security.o5logon.O5LoginClientHelper.generateOAuthResponse(Unknown Source)
at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:655)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:366)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:536)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:294)
at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1247)
at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1221)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:111)
at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:77)
at com.tes.archival.extractor.DataExtractorWithJdbcImpl.extractArchivalRecords(DataExtractorWithJdbcImpl.java:61)
at com.tes.archival.executor.ExtractorExecutor$1.call(ExtractorExecutor.java:57)
at com.tes.archival.executor.ExtractorExecutor$1.call(ExtractorExecutor.java:1)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:284)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Thread.java:797)
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>(Unknown Source)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:177)
... 24 more
Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!
at javax.crypto.b.a(Unknown Source)
at javax.crypto.b.a(Unknown Source)
at javax.crypto.b.access$600(Unknown Source)
at javax.crypto.b$0.run(Unknown Source)
at java.security.AccessController.doPrivileged(AccessController.java:241)
... 27 more
Any help in resolving this issue will be much appreaciated.
Regards,
Raman

804915 wrote:
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!Probably a permissions problem. Or something is wrong with the certs.

Compare with my cost of goods sold account to my sales revenue account

Hi,
i want to compare with my cost of goods sold account to my sales revenue account.
After PGI my COGS a/c will be debited INVENTORY a/c will be credited so after sales my SALES a/c credit & customer a/c debit . I want to see what is the difference value of COGS a/c with respective billing Sales A/C
No doudt we can see in Profit of margin in billing doc. It is quite impossible to see all document in respective wise. Please give a solution for which i can know what is profit of margin with comparing values in both of Account.
Thank's
Abhay

Hi,
This is possible through CO-PA report. You can get the result per sales order.
Also the same can be achieved in FI as follows:
Outbound delivery document thr" VL01N is captured in "Reference field" of FI doc (BKPF-XBLNR) generated through delivery.
If the settings are done by SD person to capture the outbound delivery no. in "Reference field" of FI doc generated through Billing document (VF01), then there will be a common field to compare the documents in both accounts.
In transaction FAGLL03, select the account COGS & Sales revenue account. Once the report displays, sort or take sub total on this common field "Reference".
This will give you difference between COGS & Sales revenue per document.
Hope this resolves your query.
Regards,
Ashutosh

Advance features available in sql server 2008 R2 compared with SQL 2008 SP2

Hi,
Can some one brief me the advance features available in sql server 2008 R2 compared with SQL Server 2008 SP2.
I am planning to upgrade my existing sql server 2008 SP2 to sql server 2008 R2, before that i need the advantages to proceed , if the advantages are not suite to my requirements then i will drop out this option.
Please give me the detailed reply for my analysis
hemadri

Hi Hemadribabu,
There are some new features in SQL Server 2008 Service Pack 2(SP2), including SQL Server utility, Data-tier Application (DAC), Reporting Services in SharePoint Integrated mode and partitioning improvement. Features are supported by the different editions
of SQL Server 2008 R2. For example, the Report Builder 3.0, PowerPivot for excel are available on the SQL Server Datacenter and SQL Server 2008 R2 Parallel Data Warehouse, they can assist you creating business intelligence documents. Here are the Top
new features in SQL Server 2008 R2, including
Report Builder 3.0, SQL Server 2008 R2 Datacenter, SQL Server 2008 R2 Parallel Data Warehouse,
StreamInsight, Master Data Services and so on.
For more information about SQL Server 2008R2 and SQL Server 2008 SP2, you can review the following articles.
http://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).ASPX
https://social.technet.microsoft.com/wiki/contents/articles/1486.microsoft-sql-server-2008-sp2-release-notes.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

I have the Mac OS 10.9.4 I am unable to read PDF's, so thought I would download the latest version of Adobe Reader. It will not install. Is it comparable with my Mac OS?

I have the Mac OS 10.9.4 I am unable to read PDF's, so thought I would download the latest version of Adobe Reader. It will not install. Is it comparable with my Mac OS?

More information would be good.
What do you mean by "unable to read PDF's". How are you trying to read them and what exactly happens when you try?
so thought I would download the latest version of Adobe Reader. It will not install.
Again, what exactly is happening?
And yes, the latest version should be compatible with your OS.

Need to send a mail while safty stock goes down compare with actual stock

Dear experts,
I Need to send a mail to concern persion while stock goes down compare with safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
Thanks in adv,
jayakumar.M

Your best bet may to be place your check in the a user exit for goods movements. The enhancement is MB_CF001, the component is EXIT_SAPLMBMB_001.
Hope this helps,
Mark

EA1 - File Compare With Other File... Does Not Work

I open a file in the SQL Worksheet, select File > Compare With > Other File..., nothing happens! Is this part of the Version Control feature that is yet to be implemented?

I have it logged.
Thanks
Sue

XI compared with IBM WBI

Similar Messages

Maybe you are looking for