XI Components Missing

Hi all,
       When i created the business system with role as integration server, i got an error message that " technical system already has an integration  server, So it has to be declared as Application system". So i deleted the technical system and created a new one and attached the business system details to the technical system. Now i could see only 5 XI components out of 7 under component monitoring.In message monitoring earlier i had 2 entries in the components box one for source and another one for target. But now i have only one entry(ie. target).Everything is going wrong at the same time. I am not able to refresh my cache(Error: Communication Failure).What do i need to do??
Regards
Amith

Hi,
  Is it bcoz of the overwritten business system? How do i solve this issue?? Under Performance Monitoring in RWB,
I'm getting the following error messages:
1)XI domain unable to specify Integration Server
2)Attempt to create JCo connection object failed for domain domain.00.bwxi
3)Integration Server unable to specify a JCo client
4)No component names available from Integration Server
What do i need to do???
Regards
Amith

Similar Messages

  • Cucm DRS backup components missing 8.6(1a)

    hi,
    we are in the process of migrating to latest 10 version.  the current version is 8.6(1a) CUCM.  I tried build the customer exact environment in the lab (same ip/dns .same version of cucm..etc)...finally when I brought the backup to the lab to restore to this newly built cucm, I noticed the cucm drs components which will be listed on the Disaster recovery restore wizard after the tar file has been accessed, missing few components.
    for example, in ideal situation you will see the components car,cdpagt,syslogagt,ccmprefs,bat,platform,tct,ccmdb,clm,tftp,moh,ann, reporter. (see attached pic, "supposed to see") but my situation
    cdpagt,reporter,bat,tftp,cef,ann,moh components are not shown.  thus when I initiate the restore, it fails.  this is not to say that customer may have not given all the backup files. I was there when I dragged and dropped in my pc.

    resolved it.
    all we need to do is deactivate and reactivate the services for the missing components.  for ex. if tftp component is missing then we will have to deactivate and reactivate.  go to DRS page and check to see if that shows up as component being backed up.. it will show up. I found a bug for this version.  but the details of it does not tell you about all the components missing on mine. it only shows tftp component missing. with work around being the same.
    thanks
    vijay

  • Itunes components missing :(

    i updated itunes and it now says components missing -42404 and i have completely uninstalled and reinstalled with the same problem 3 times can anybody help me as i now cannot retrieve my music through home share with my sister and my iphone cant be detected

    download iTunes from here:http://www.apple.com/itunes/download/ and save the intunessetup.exe or itunes64setup.exe file depends on your operating system.  Unzip the file with Winrar program and right mouse click AppleSoftwareUpdate.msi to install ASU.

  • Photoshop 2014 receive error  message saying components missing. I  deleted  app as requested, how do I reinstall ? Its is not I'm my creative cloud to do so?

    Photoshop 2014 receive error message saying components missing. I deleted app as requested, how do I reinstall ? Its is not I'm my creative cloud to do so?

    This might help...
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    -Noel

  • Installed PS, used once, now 'components missing'. How do I reinstall?

    I downloaded PS, then used it.  It started immediately and seemed to work fine. Saved and closed application.  Attempted to use again and got message 'components missing' then 'reinstall program'.  Application Manager no help, says all is fine.
    So, now I look for help and end up in a forum instead of getting help from Adobe for their program which I paid for.  Who knows how long I'll be down.  Seems a poor system!!
    Congodog

    Which operating system are you using?  Have you tried removing Photoshop and reinstalling?  If so what process did you go through to remove Photoshop?
    Finally you are welcome to contact our chat support at http://adobe.ly/yxj0t6.
    If you are looking for phone support then please go to http://www.adobe.com/ and choose Help>Contact Us.   After choosing the correct options for your inquiry you will be offered the proper support phone number for your Country/Region.

  • Core Audio Components Missing After Clean Install and Update to 10.3.9?

    I did a clean install of 10.3.x onto my hard disk and then updated to 10.3.9 through Software Update.
    Before this install I'd been running 10.3.9 (my disk crashed -- or so I thought -- hence the re-install of all above). I'd been running a music recording program and taking advantage of Apple's Core Audio AU components (e.g. AUDelay, etc), which should be in /Library/Audio/Plug-ins/Components/ or something like that. Now they are missing entirely.
    How do I get them back? Where are they to find?
    Thanks!

    It was a problem with the 3rd party software -- I hadn't run the installation update to interface with the AU Components -- after the reinstall. Thanks.

  • Kona Components missing.

    I had some work done to my G5 and when I got it back up and running, FCP is telling me that I do not have the proper codec/hardware installed for my timeline settings.
    I have a Kona LH card installed, and was previously running all of my timelines in uncompressed 8bit. This option no longer exists in my FCP sequence settings, only 3 10bit compressors. In the Kona control panel, under info, it reads this for /library/quicktime:
    MISSING! - FCP Uncompressed 422.component
    MISSING! - DVCPROHDCodec.component
    So my question is this: How do I recover these lost quicktime components so my Kona card will talk to FCP and allow it to use an uncompressed 8bit setting?
    I have tried reinstalling/updating the Kona software and tried reinstalling Quicktime.
    Thanks!
      Mac OS X (10.4.3)  

    I'm not an expert on this, by any means, but last week I got the same "do not have the proper codec/hardware." Scary. This was after I had borrowed a Kona card for a few days to import from HDcam, then removed the card to return to its owner - the Kona software remained. I could no longer open any of my 720p timelines or import P2 files. Tried reinstalls of Final Cut, and Quicktime - no luck. Finally got timelines to open again after doing a clone of everything - OSX, Final Cut, and Quicktime from a cloned backup I made before the Kona card use. This working version now has no Kona drivers or plug-ins or anything. You want your Kona, so I don't know if this is a help, but it seemed that the order of the reinstalls and possibly the OSX had something to do with plug-ins and the folders in which they were installed. Maybe try a reinstall of OSX, then Final Cut, then Quicktime, then Kona. But this is a lot of work and you may want to wait for another more expert opinion.

  • MAX Reports-Initialization Error, Editing Components missing?

    Using a NI PXI-1042Q and an 4472B Daq card to capture data.  Running LabVIEW 8.2 on a Windows XP system.  The program controls an MID7604 which controls a motor.  Using a program that was written and is now an executable.  To run the program minor file related inputs are required, the motor moves to calibrate its' position, then a test piece is requested to be adjusted.  After the adjustment, file request information is acknowledged (location for data to be placed is ok'd). 
    After pressing OK, the following error message is generated: 
    [ ERROR-200428 occurred at DAQmx Start Task.vi, Possible reasons: Value passed to the Task/Channels In control is invalid.  The value must refer to a valid task or valid virtual channels, Then it identifies the Task Name: __________.] 
    This of course refers to the Task/Channels IN input of the DAQmx Start Task.vi, which points to the task that was setup, not being setup properly or not there.  In our case, it was there and has somehow been removed.
    When going to MAX and trying to setup a new Task:  Data Neighborhood --> Right Click --> Create New NI DAQmx Task,
    the following message is generated:
    !INITIALIZATION ERROR
    Some components required for editing are missing.  Please contact National Instruments for more information. 
    We have already viewed the NI-DAQmx Error-200428 message, and also tried the "How Do I Recover From MAX Database Corruption?" procedure, no change. 
    Please respond. Thanks.

    Typically with an executable you only have the run-time versions and I don't think you can create a task with just the run-time. Somehow the hardware configuration has been corrupted. If you can find the original .nce file that was used on the development system, you can just import that I believe. Otherwise, you may have to install full versions of DAQmx.
    The reliance of existing tasks in MAX is one reason that I avoid them and create everything in the LabVIEW program. Just one thing to keep in mind.

  • Question: Photoshop application components missing

    After installing Photoshop via Creative Cloud on a Mac, I now am getting the message :  "Some of the application components are missing from the Application directory, Please reinstall the application. "
    Could someone please give me simple instructions on how to do this?
    THANK YOU!!

    What is the specific error message you are receiving?  What operating system are you using?  Did you receive any error messages during the installation process?

  • Standard ESS components missing!!!

    Hi Experts,
    I am working on ESS components in WD ABAP. But there is a problem the standard ESS componets for travel and expense which strats with prefix  FITE are missing in Sandbox system and production system. But these components are available in development system. What could be the reason for it and the preffered solution in this case. Please help.
    Regards,
    Vaibhav Tiwari.

    Hi,
    Make sure the FITE* and FITV* services are activated in transaction "SICF" under the path:  default_host --> sap --> bc --> webdynpro --> sap.
    Let me know if that helps.

  • Ipad components missing

    Hello
    I sent an ipad off have screen fixed, its come back unrepaired saying theres a fault and now bits are missing, can i ask from this picture what is missing please?

    There are no user serviceable components in an iPad. Contact whoever you sent the iPad
    to for assistance in resolving the matter. Hopefully you have been dealing with Apple
    or an Apple authorized service provider.

  • Components missing...?

    Trying to watch some trailers, Quick Time informs me that some third party components are missing. It opens a webside with all of them.
    http://www.apple.com/quicktime/resources/components.html
    How do I know, which one should I download ?
    Should I download them all...?
    Thanks
    bafomet

    The components on that page are rarely used. If you can open the video (even if the video doesn't play) then check MovieInfo (Command-I) to find the compressor. Someone here may be able to tell you where to find it. If you can't even open the movie then check the site the video came from for info on the compressor needed. If it is an avi file you could try this Divx decompressor, although it may not work for you.
    http://labs.divx.com/archives/000057.html
    If all else fails try viewing the video using this alternative video viewer: VLC

  • PS CS5 for Mac stopped working. Error "components missing" Reinstalled, same error [was:JayDEdwards]

    My Photoshop CS5 for Mac stopped working. I got an error message stating that some of the components were missing and I should reinstall. I tried to reinstall using the CD, but I get the same results  --  error message and no functioning icon. What do I do?

    uninstall ps. 
    run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html
    restart your computer
    reinstall ps cs5.

  • Xcelsius 2008 5.4.0.0 - XLF file - All components missing/blank canvas

    xcelsius 2008 5.4.0.0  build 12,4,0,1166 --
    working on a xlf file - save it -- go to reopen it and get a blank canvas -- look in object browser and ALL objects are missing - none showing
    did the resedit thing removing the en file --
    rebooted windows and xcelsius several times
    tried to go into preview mode -- nothing there
    tried doing an export to html and viewing html -- nothing there
    other observations --indicating it may not be the "typical flash" issue
    #1 - other XLF files open and objects are there and act and behave normally
    #2 - other html files etc all operate fine
    somehow something is corrupted - had a wierd thing when i started up - it showed the split screen components were there etc -- but then the program seemed to crash - and then the sap window came up and it started up again - there might have been a warning that it was busy or retry or something --   that is the only thing i noticed
    using newer components -- bubble chart  - but nothing really out of the ordinary
    please help - would hate to rebuild -- DO have the underlying data in xlf and exported it to xls  so im safe there
    thanks

    With SP1 and FP3 this issue is resolved. Closing thread.

  • Document flow for BOM item components missing

    Hello,
    I would like to seek help on the following:
    I am creating a process where in I can create sales order (OR type) with reference from a sales order (like quotation type). I successfully configured the needed and was able to create one.
    However, I have noticed that if I used BOM products (where there is a header and item components) and check the document flow per line items, only the header BOM (line item position 10) has document flow  reflecting the reference order quotation type while the its components doesnt show such.
    Below is an example of the document flow:
    Bom Header (line itemk position 10):
    Document                                              Quantity Unit                     Reference value      Currency
    Buffer Buyin 111111 / 10                             1        EA                        0.00                          USD
    --> Product Order 222222 / 10                      1        EA                        0.00                          USD
    Line Items Component
    (line itemk position 20):
    Document                                              Quantity Unit                     Reference value      Currency
    --> Product Order 222222 / 20                      1        EA                        0.00                          USD
    (line itemk position 30):
    Document                                              Quantity Unit                     Reference value      Currency
    --> Product Order 222222 / 30                      1        EA                        0.00                          USD
    Thus, in above illustration, the line item component document flow has a missing data that would reflect the reference sales order. Please advise if what needs to be configure here.
    Thanks,
    Ria

    Hello Amit,
    The current scenario is like this:
    1. Reference sales order (OR but assumed as QT type) has item category YYBS for normal material and ZTAR for header BOM and YYBS as components.
    2. When these sales order (OR but assumed as QT type) is being reference to create actual orders to customers  (OR type) the normal material will be changed from YYBS to YZBS while BOM will have ZTAR header and components YZBS. This is the reason why I told you that its like the normal material.
    I checked the copy control line item settings as yes, document flow is ticked.
    Thanks,
    Ria

  • WINPE Optional Recovery Components missing from ADK 8.1

    as indicated here:
    http://technet.microsoft.com/en-us/library/hh824926.aspx
    WINPE-Rejuv and WINPE-SRT components are missing after install of ADK 8.1 while WINPE-WinReCfg is available?
    Has something changed to provide these additional optional components to WinPE_OCs?
    I enabled the following for ADK 8.1 setup:
    - Deployment Tools
    - Windows Preinstallation Environment
    - Windows Performance Toolkit
    - Windows Assessment Toolkit

    I'm pretty sure those are DART cabs which would require a MS Subscription to DART premium recovery tools.  Either way I don't see them in my 8.1 ADK if that helps.

Maybe you are looking for