XI Configuration for AII Flexible Delivery scenario

Hi,
 I am configuring AII flexible Delivery scenario.I have succesfully tested the outbound delivery part and trying to run the ASN and inbound delivery in customer system.
 I am using One XI system to achieve this scenario.
 To achieve ASN and inbound delivery scenario,I have configured component view ASNElectronicLabelPost & ASNElectronicLabelEnrichment.
I want to know
1. what is the IDOC which is used to send the ASN from supplier system to XI?
 My answer: The supplier's system send the IDoc DESADV.DELVRY05 or DESADV.DELVRY03. Please correct me if I am wrong.
Also what are the precautions which i need to take if I am using single XI system.
Thanks and regards,
Amit Deshpande

>>>>>>>1. Send ASN
The suppliers ERP system sends the IDoc DELINF.DELVRY03 or DELINF.DELVRY05 to the XI system (message interface DespatchedDeliveryNotificationOut).
>>>as it's true
>>>but with the info that I've mentioned (no EPC in case or delvry03)
My understanding was that the supplier system sends the Idoc DESADV.DELVRY03 or DESADV.DELVRY05 when a ASN is created in Supplier system.
Because when PGI happens i see the IDOC which get triggered is of type DESADV and not DELINF.. My understanding may be wrong.
I have made the changes suggested by you but my Supplier system is down for sometime now.
Is it necessary that both supplier as well customer system should use same type of IDOC ?
Does ECC 5.0 support DELVRY5.0? I cannt find it in my system but i have DELVRY04 which has the segment for EPC information. But this wont be supported by XI I believe in the integration scenario.
Thanks and regards,
Amit Deshpande

Similar Messages

Configurations for AII

Hi,
Is there any document to configure the complete
R/3/ECC-XI-AII delivery scenario involving configurations in R/3/ECC, XI, AII??? I'm sure many would ahve done it!! I'm doing a demo b4 implementing this... Kindly share any documents u have.
Regards,
PB

Hi,
Documentation on configuring ECC-AII for various scenarios is available in service.sap.com>RFID>Product Information.
Regards,
Ashish

Alert Configuration for File to IDoc scenario

I have followed Alerts : Step-by-Step /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
and configured Alerts for file to IDoc scenario.
But the problem is, I did not notice any alerts being generated. I could notice the IDocs being posted to destination system. So I was going through Alerts-Troubleshoute Guide. In intension to maintain monitoring level, I clicked Configuration tab. But I did not notice my sender and receiver system there to maintain.
Can any body help me to detail out the procedure to add sender and receiver systems to maintain the monitoring level?
Regards,
Suraj Kumar

hi Suraj,
WHich SP version are you on??
If you are on Sp14 or above, then unfortunately, Michal's Trouble Shooting for Alerts will not help.
From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note 870232 for this info.
Next, to test if your Alerts have been defined correctly, go to SE38. In the program , type RSALERTTEST and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
If this is working fine, then the last step, implement the note 913858.
Regards,
Bhavesh

Sld configuration for rfc to soap scenario

Hi all,
The scenario which i am planning to do, describes how the Custom RFC client application in SAP R/3 System invokes a free Web service (that is hosted over the internet) using SAP XI. For our demo purpose, we have used a free web service available on the Internet.
In this scenario we will be using GetQuote method of Web service DelayedStockQuote. This method retrieves the Stock quote for the given Stock symbol. The method GetQuote has an input that takes in two parameters Stock Symbol and License Key and returns the following information.
StockSymbol,
LastTradeAmount,
LastTradeDateTime,
StockChange,
OpenAmount,
DayHigh,
DayLow,
StockVolume,
PrevCls,
ChangePercent,
FiftyTwoWeekRange,
EarnPerShare,
PE,
CompanyName.
Link to web service:
http://ws.cdyne.com/delayedstockquote/delayedstockquote.asmx?op=GetQuote
In this scenario, I planned to create two mappings, first between RFC Request to SOAP Request and second between SOAP Response to RFC Response .
Adapter in sender communication channel is RFC.(RFC Protocol)
Adapter in receiver communication channel is SOAP.(HTTP Protocol)
Result:
On testing this scenario, In the Sender R/3 system we have to Execute the Report program we have created earlier. When the program is executed with Stock symbol it should get the details of that stock symbol from the Web service.
My question here is what would be the sld configuration for webservice.whether it is a Java WAS or third party.If it is a third party or java WAS,what would be the system name and host name.
Any clarification from you all is welcome and will be highly appreciated.
With Regards
Karthik.

Hi,
I would suggest you is to use third party. It is a web service, and does not matter the technology behind it (if it is java, abap, .net, cobol, no difference! it will be described by a wsld).
System name and host name doesn't matter too, you will not use this information in runtime, and you will specify host name and so at integration directory. You can make your standard on it, for example, put the name as DelayedStockQuote and host as http://ws.cdyne.com.
regards.
roberti

ALE Configurations for JDBC to PROXY scenario

Can some body tell me what are the ALE configurations that needs to be done in both the systems and also in XI system.

Hi there
No need for ALE confihuration unless you are using IDocs in your scenario.
You need to configure the integration engine in the Proxy system using SXMB_ADM and create an RFC for the Integration server.
on the JDBC side you'll need the database bridge configured in the communication chanell...
what is your scenario specific...which system types and versions?
Nimrod

Configuration for Make to Order Scenario

Hi!
We are using make to order scenario, but we want to follow product cost by production order, not product cost by sale order.
alway our costs should acrrue to production order.
What are steps we need to check and do..
In requirement class (40), we need to change any thing ?
regs,
ramesh

Dear Ramesh,
Dont remove any account modification indicator
Just keep blank consumption posting field.
Regarding valuation, if you keep it as M=Valuation related to particular S.O
A=Valuation not related to a particular S.O(MTS)
So, you can keep this field as blank(i.e. Non-valuated stock)
Rgds
Murali. N

AII Flex Del Scenario DESADV.DELVRY03 IDOC

Hi
I am working on IDOC-TO-IDOC scenario in flexible delivery scenario.
When an ASN is sent from supplier system to customer system via XI the idoc DESADV.DELVRY03 is used to create inbound delivery against the purchase order
While executing IDOC in target system, the system gave error with error status 51.
the error is POSEX field is empty.
I tried to test execute this IDOC in transaction we19 by filling value of POSEX.
What should be the value of this field so that IDOC is executed properly?
Looking forward to pointers to above query.
Thanks in advance.
Amit Deshpande

Hello Amit,
There are 2 POSEX fields in the DELVRY03 Idoc,
E1EDL24-POSEX is External item number
E1EDL41-POSEX is Item Number of the Underlying Purchase Order
Go to WE60 and put in DELVRY03 and look this up.
In the IDOC it should show which segment is in error.
Regards

MDD to ECC Configuration for Vendor PI Content

Hi,
I am working on MDM to ECC Scenario for sending Vendor details to ECC using the standard maps available in MDM BUSINESS CONTENT 7.1 SWCV.
There are two message mappings:
1) CREMDM.CREMDM04 to CREMAS.CREMAS05
2) CREMDM.CREMDM04 to ADRMAS.ADRMAS03
How should I configure the scenario in Integration Directory.
Do I need to use any splitting condition using Xpaths?
Can you send any blogs or SAP Notes avaiable for this?
Best Regards,
Harleen Kaur Chadha

Hello Harleen,
Maybe this can help you
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/107fabbb-b8ca-2b10-04b5-8f34729ef228
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/daa51a96-0b01-0010-738f-a0ecfd06104e
Regards,
lpbuff

Configuration Scenario for BPM Using Integration Scenario

hi All,
I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
Hoe to Create Integration Scenario for BPM Scenario
Integration Scenario in BPM and few more.
My IS looks like
Sender App Component - Integration Process - Receiver App Component
Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
And when i click "Configurability Check" Button, i am getting below as status:
Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
getABSPayload and sendABSPayload are actions for Abstract interfaces.
IS_POC_BPM is the Integration Process Name.
Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
Please help me in identifying if i am doing any thing wrong in creating this scenario.
Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
Thanks,
Mayank
Edited by: Mayank Gupta on Apr 21, 2010 6:35 AM

I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
may be after looking the Integration scenarios you will get more idea
Regards,
Abhishek.

Configuration for creat auto background job to create outbound delivery

Dear Experts,
Kindly let me know where and how can I configure auto background job for creating outbound delivery, TO and Print picking list
Thanks in advance
Shetty

< Job for delivery creation:>
1. you can run tcode vl10batch to schedule a job with your own variant.
2. alternatively, you can directly schedule a job in SM36 -> program RVV50R10C, variant
When define variant for background delivery creation, please make sure:
- "Select rule" must be set to '2'.
- "F code profile" should be '5001' (Fcodes GET, PREPARE, SAMD should be included.)
<Job for TO creation>
1. Run tcode VL06p with your own varinat -> click button "create TO in background"
2. Alternatively, you can directly define a job in SM36. -> program name WS_MONITOR_OUTB_DEL_PICK.
<Job for printing pick list>
1. run tcode VL70 with your own variant -> goto menu bar / program / execute in background -> then a job is created.
2. Alternatively, you can schedule a job in SM36 -> program SD70AV4A.

Configure background job for collective outbound delivery processing

Hello Gurus,
I want to Create a background job to be executed during off-peak hours for collective outbound delivery processing. will you please give me step-by-step configuration ?
thanks very much!

To set up a batch job for delivery creation use SM36 T-code.
Input batch job name say - ZSD_CREATE_DELY_SALES_ORG
Select class = C or B.
Set up by / created by = BATCHADMIN or your id
Program Name = WS_DELIVERY_UPDATE
Varient = (as per your requirement - say for a particular sales area and plant)
Click on "Check" icon and "Save".
Go to the main page, select icon "Schedule a Batch job".
Give detils like daily, weekly or periodic or Immediate.
Enter date and time accordingly. Save it.
Same thing applies for Invoice creation batch job.
Use program name:RSBDCSUB
All other steps remain the same.
Hope this will help you out !
Regards,
Rajesh Banka

How can delayed delivery update be configured for Inbound delivery ?

Hi All,
How can delayed delivery update be configured for Inbound delivery ?
There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
Regards
Jimmi

Hello Jimmi,
Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
664316 Tips for the delayed delivery update for TO
I hope this information helps!
Martin

Outbound delivery scenario

Hi friends,
I am working on outbound delivery scenario where there is integration with the fixed devices through device controller.
I am doing following process
1. I am commissioning tag for the item to issued.
2. Then i am loading this tagged item through fixed readers. (i am not carrying packing as it is optional)
My question
How will the AII come to know which is the outbound delivery against which this particular id is loaded?
Is there any step to ensure that ensures document assignment?
Please help me resolve this issue.
Thanks and regards,
Amit Deshpande

Hello,
There are two ways which i can think off to make your tags hit the correct document, on of them is to send the DocumentNo in the PML which is carrying the tags data to AII from your device controller. XML for this can be obtained from the test tool TCODE(/AIN/TEST_CLIENT). In the filed name on the info tag give DOCUMENT_NO rest remains as previous tests. Once you view the XML you'll see DOCUMENT_NO element come just above the READERID element in the PML.
Second method is to go to AII desktop and assign the delivery document to a specific location, after assignment all tags read from that location (all tags read by devices configured on that location) will be bound to your delivery. You can observer the assigned delivery being associated with the tags in the Execution view.
-Aniruddha

Total Delivery Cost for partial Item delivery

Hi Guru,
I have a requirement wherein I have to apply the total delivery cost for partial Item delivery.
For example: Even if there is partial GR, delievery cost must be paid in full.
Say PO is for 100 PC and delivery cost is 100 EUR. Now at MIGO if the delivered quantity is 60, the freight vendor must still be paid 100 EUR.
Is this possible by configuration or do we need to make any changes at code level? If yes, Please guide me on how to do that....

Create a PO without tick GR-Bsd IV, suppose I have created PO with qty 20 and rate 1 INR and give freight 50 INR (Fixed Amount)..
Then I have done partial GR for qty 5. My freight amount booked as 12.5 INR (for partial GR)
Then I have gone for MIRO..
Here select Goos/Service item + Planned delivery cost.
Enter the PO, you can see two line items appear..
One for goods and one for freight...
Goods will come as qty 5 and amount 5 INR and Freight will come as qty 5 and amount 12.5 INR.
Just change the freight qty and amount as 20 and 50 INR.
Then post the MIRO, you can see your total freight will be booked to vendor..
Now again do GR for qty 2, at that time your freight amount will booked as 5 INR.
Then when you will go for MIRO, you can see only the GR item, Freight qty and amount will not come at the time MIRO..
(Note : I have told the scenario as per my previous screen shot)

Inbound Delivery Scenario

Hi ,
I am new to this AII field.I need some guidance regarding the Indbound document scenario.
I have tested the outbound scenario with AII test tool.Now i need to know what are the steps involved for inbound delivery scenario and what are the procedures to accomplish it.
Where can i find the procedure/steps on the above topic.
Help would be appreciated for sure.:-)
Regards,
Vivek

Hi Vivek,
Check out these, will help you I guess.
help.sap.com/bp_imcv1500/IMC_DE/Documentation/E82_Scen_Overview_EN_DE.ppt -
SAP Supply Chain Management- Device Controller Interface (AII-DC-RFID) [original link is broken]
this is a good document will help you understand inbound processing clearly
see from page14.
http://www.sap.com/norway/company/events/rfid/SAP%20RFID%20Solutions_A%20customer%20example.pdf
Hope this helps
Regards
DIvya

XI Configuration for AII Flexible Delivery scenario

Similar Messages

Maybe you are looking for