XI content for CRM 4.1

i was able to locate the BBPCRM module but it is for crm version 4.0 and i can not find one for version 4.1. I also tried to find some documentation  but i can not find any documentation about this module. anybody any suggestions ?

Hi Frank,
you can find "some" info on:
https://websmp203.sap-ag.de/rkt
(from the CRM learning maps)
have you seen CRM 2005 preview?
https://websmp203.sap-ag.de/~sapidb/011000358700001919592005E
Regards,
Michal

Similar Messages

  • BI-Content for CRM not available

    Hello,
    We have a brand-new BI system and I can't find the BI content for CRM. Like infoproviders 0CSAL_C03, 0CSAL_C05 and 0CSAL_C05. I know it has to be installed by basis somehow but we don't know how. This thread is linked to the one shown below.
    Best regards,
    Thomas Wagner
    http://scn.sap.com/thread/3521179

    Hi Thomas,
    Please check SAP note 1146395 - Configuring CRM Interactive Reporting
    Here we have some preliminary configuration steps and troubleshooting steps.
    Hope this helps.
    Regards,
    Deepak Kori

  • XI Content for CRM 2007

    Is there any dedicated XI Content package for CRM2007? I could only find Content for other versions of CRM in SMP.

    Go to http://service.sap.com/swdc
    Downloads --> Content --> Content for business Suite 2005 --> Select mySAP CRM 2005 --> Select content according to ur scenario
    Go to http://service.sap.com/swdc
    Downloads -->Installations and Upgrades --> SAP Application Components --> SAP CRM --> Here u may find CRM 4.0 as well as CRM 5.0
    check the thread
    Software Component CRM 5.1
    regards
    kummari

  • Business content for CRM Interaction center

    Hi Experts,
    I have requirement in BW CRM interaction center.I need to analyse Fit Gap Analysis for CRM interaction center.I need to give the explanation either the client requirement can be implemented with business content or need to customise.I am looking some one can throw light on this topic.I am new to this requirement.I would like to know where can I find the Business content reports and extractors related to CRM interaction center in BW.Please shed some light.
    Thanks,
    Suryam.

    The same question
    I read documentation and found:
    1) 0CRM_CIC_INTERACTION
    2) 0CRM_CIC_CTI

  • Portal Content for CRM 5 - Missing Menus!

    Hi,
    We have uploaded the Business Package (BPCRM5001_0-20000877.sca) of SAP CRM 5.0 into our EP 7 and assigned two roles - Sales Manager (com.sap.pct.crm.salesmanager) and Sales Representative (com.sap.pct.crm.salesrepresentative).
    But, we still do not see any CRM related menu in our EP 7. We are new to CRM / EP. It would be a great help if you could please let us know what are the steps we are missing.
    Thanks in advance.
    - Jas

    Configuring the Business Package for SAP CRM 5.0 SP00 (EN)      - https://websmp102.sap-ag.de/~sapidb/011000358700003516052005E/Config_50_EN_SP00.pdf
    PCUI Book for CRM 5.0  -
    https://websmp102.sap-ag.de/~sapidb/011000358700001093962006E/PCUIBook50_06.pdf
    You can find them at
    https://websmp102.sap-ag.de/crm-inst -> SAP CRM -> SAP CRM 2005 -> CRM Business Packages and PC UI
    Points are welcome!!!
    Thanks,
    Raags

  • Business Content for CRM

    All,
    We are in the Blue Print phase of our CRM project.  During the Integration of CRM 7 EHP 1 to our BW 7 EHP 1 system we notice a parcular issue.  After executing all the necessary steps on both the CRM side and the BW side, we notice that only a handful of data sources are being activated when choosing the RSDS activation mode.   The work around, we had to delete the datasources we want to use but that were not automatically activated, and then reactivate using 3.x mode.
    Both systems are on the latest SPS and both systems have the same version of SAP_BW and BI_CONT 7.04.  Is this the way it is suppose to work?  Is business content delivered on 3.x version?  Do we need to convert Business Content to 7.0 before trying to activate it?
    Thanks in advance.
    Jose

    Hi,
    CASE-I
    Maintaining the same SPS Versions and Datasouce version is differant.
    A standard procedure of Business Content Delivery in OLTP Systems by SAP
    http://help.sap.com/saphelp_nw04/helpdata/EN/ca/85f911c4bda4479af0a062bd9dfa94/frameset.htm
    CASE-II
    As you are upgradeing to CRM 7.0. I guess you have to upgrade the datasouce to BI 7.0. To enjoy the recent advantages/functionalities of netweaver . Upgrading is a process of enhancing to a newer version, facilitate to roll back to older version if require.
    Migration from BW to BI7 after all upgrade you can migrate 3.0 objects to 7.0 read this article
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00d94ca8-9538-2c10-9b99-859afde1fa4a
    Deleting aspect: Take advice of you Business approvals (SME -Subject mater experts)
    Hope this is helpful.
    Regards
    AB

  • BI Content for CRM campaign with all elements (including products)

    Hi
    I have tried to find a solution to extract campaign from CRM to BW. In our solution we need all details including 0material used in the campaign.
    Todayu2019s solution is based on viewu2019s on tables in CRM, but this solution has not any delta, and deletion done in CRM will not be visible in BW (without deletion and full reload)
    Is there any other solution on this ?
    Kind regards
    Ola Einar Langen

    Hi,
    //// My problem is SAINT -> CRM Add-On Manager can not recognize this packages from /trans/EPS/in.
    Is your system a Solution Manager system or CRM system ?
    Regards,
    Deepak Kori

  • BI Content for SAP CRM

    Hi,
    We have a core CRM 2007 system and a BI 7.0 system that we are implementing on top of it.
    We have BI cont 7.03 installed. The predelivered BI content for CRM that I find are all in the BI 3.x version. My question is - is it advisable to try to upgrade it to BI 7.0 version before use since this is a fresh implementation? What are the Pros & Cons of the same?
    If we should convert the Business Content Objects individually to BI 7.0 version, what is the process? Do the transfer rules, update rules etc get converetd automatically into Transformation rules and DTPs?
    Is there a way to upgrade the entire chain of objects (the way we activate them "in dataflow before or after the object")?
    Any input will be highly appreciated.
    Thanks & regards,
    Nikhil

    Hi,
    Below the information you can get insights about the loyalty and BW Loyalty Implementaion .
    http://wiki.sdn.sap.com/wiki/display/CRM/Marketing
    below link would explain how the loyalty engne works..
    want table details where rules in loyalty management stores
    http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/d9/8f52a192b54e7c94e3aa22098e68b9/frameset.htm
    trough below tables you can get number of points earned by a member based on Membership and for the same for redemption .
    LOYD_MEM_MEMBER--- master data for member ship for loyalty man
    LOYD_MSH_MEMS
    LOYD_MSH_MS_MEMB -- Link Table for Membership and Member
    LOYD_MA_SPECATTR --- table for membership activty .
    Also you can search the tables by the key word LOYD* Most of  the loyalty table start with LOYD*
    Regards,
    Satya

  • Datasources for CRM Workforce Management

    Hello Dear Experts,
    I am trying to activate the Datasources from the business content for CRM Workforce Management (0CRM_WFM) but the extractions do not work : I have the message "Datasource not supported by the extraction program.
    Has anyone already worked with that content? And do you know if there is some customizing in CRM or WFM to activate correctly the datasources?
    The help and forums are not very rich for that domain : does anyone have some docs?
    Thanks for your help.
    André

    Hi
    http://help.sap.com/saphelp_nw70/helpdata/EN/32/9bae399c1a6651e10000000a114084/frameset.htm
    May help you

  • XI Content for Business Partner

    hi,
    can anyone suggest what is the XI Content for Business Partner in CRM.  i just need the exact name so that i can download it from the service marketplace.
    thanks.
    krishnan

    Hi,
    We have uploaded the XI Content for CRM Business Partner into the Repository.  We are able to find the Message Type --> ABABusiness Partner. 
    How do I proceed further.  Shall I copy this message type to my namespace and create Message Interfaces and proceed with mapping the source and target.
    In that case, how will the function module BUPA_OUTBOUND_MAIN identify the message interface created in XI.  I understand that there is some proxy code within the function module BUPA_OUTBOUND_MAIN.  How this proxy calls the message interface which I have created in XI.
    Krishnan

  • Getting predefined XI content in CRM for connection to CM

    Hello,
    we are trying to connect our credit management system with several other systems. According to SAP-Help predefined XI content exists for certain interfaces (e.g. CreditCommitmentNotification). We need to use this interface for two connections. For the FI-CA system everything is there. You can import the SWC FI-CA_XI and you have the necessary message interface in XI-repository and also the ABAP Proxy Classes are already implemented in the FI-CA System. So there you can configure the scenario to send the CreditCommitmentNotification to XI.
    For CRM ABAP-Help says that there is the same message interface provided. It is needed to install Add On CRMIS 400. So we did that. But in CRM there are no proxy classes like in FI-CA and if you import SWC CRMIS 400 to the integration repository it is an empty SWC.
    Did we miss anything?
    Do we have to download and import content into XI repository server? Where do I find this? Is in  XI CONTENT BBPCRM 4.0 the required data to import? Is there any overview for which Components predefined XI content exists   and which SLD-SWCs containing predefined XI content fit for certain versions of Add-Ons, Plug-Ins, Modules.
    Any helpful hints,
    (I already searched SAP-Help, service.sap.com/ibc, service.sap.com/swdc)
    regards
    Martin

    Hi,
    Can you guide me to where you found XI Configuration Scenarios for SAP CRM?
      Thank you in advance,
      Dmitriy Mindich

  • CRM Content for Solution Manager

    Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
    I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
    Please help.
    Kind Regards
    Felix

    >
    felix chabeli wrote:
    > Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
    >
    > I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
    Do you want to implement CRM 7.0 with the help (project, Business Blueprint, Configuration) of a SAP Solution Manager system?
    If yes, you can browse through the [Available implementation content|https://implementationcontent.sap.com/bpr]
    The content is shipped via add-on ST-PI and its support packages.
    Relevant transactions: SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02
    Regards,
    Ruediger

  • How to access the pre-delivered XI Integration Content for APO ,SCM or CRM

    Guys,
    Do anyone know how to access the pre-delivered XI Integration Content for APO ,SCM or CRM and load onto the XI server.
    Any inputs in this direction is appreciated.
    Thanks, -Vara.

    Hi VaraPrasad,
    you can try:
    1. https://websmp204.sap-ag.de/swdc
    2. Search for all Categories
    3. type: XI content
    then unpack and the easiest way is to import with the file system:
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
    and you have the content on your XI
    Regards,
    michal

  • Find the std Business content for these objects in CRM..

    Hi,
    Can you please help me in finding
    To identify the standerd BW extractors in the Business Content.
    From the CRM
    Business Content for the following objects
    Product ( New products in CRM and not in R/3)
    Sales Orders à
    à Line items.          
    Quotations            CRM only
    Billing Documents            CRM
    Credit Notes           
    Customers  - àNot fully registered " prospects will be in CRM only.
    Customers will be transported to R/3
    IBASE            àMaster Data Item
    àContent?
    Activities            CRM
    Please help me how can I find the std Business content for these objects in CRM..

    CRM Business content objects:
    0CRM_LEAD_H - Lead Header (Transactional Data)
    0CRM_LEAD_I - Lead Item (Transactional Data)
    0CRM_MIG -  Mail GUID
    Characteristics
    InfoObject     Description
    0CRM_LEAGUI     Lead GUID
    0STAONESYS0     CRM status life cycle (One Order)
    0STAONESYS4     CRM status opportunity/lead (One Order)
    0CRM_RCA     Catalog
    0CRM_RG     Code group
    0CRM_RCO     Code
    0CRM_PROSPE     Prospect
    0BP_CONTPER     CRM contact partner
    0BP_RESPPER     CRM owner
    0CRM_SALESP     CRM sales partner
    0CRM_OBJTYP     Business transaction object type
    0CRM_ITOBTP     CRM item transaction type (object type)
    0CRM_MKTELM     CRM marketing element
    0CRMPLEAGUI     CRM preceding lead GUID
    0CRM_LEADCR     Creation date of the lead
    0CRM_OPPGUI     GUID of a preceding opportunity
    0CRM_OPPCRD     Creation date of the opportunity
    0CRM_PREOTP     Object type of the preceding document
    0DIVISION     Division
    0DISTR_CHAN     Distribution channel
    0CRM_SRVORG     CRM service organization
    0CRM_SALOFF     Sales office
    0CRM_SALORG     Sales organization
    0CRM_SALGRP     Sales group
    0CRMSA_OG_R     Responsible organizational unit (sales)
    0CRMSE_OG_R     Responsible organizational unit (service)
    0CRM_PRHIER     Product category ID
    0CRM_PROD     CRM product
    0CRM_ORDPRD     Product name entered
    0MATERIAL     Material (allocation to R/3)
    Time Characteristics
    InfoObject     Description
    0CALDAY     Calendar day
    0CALMONTH     Calendar year/month
    0CALQUARTER     Calendar year/quarter
    0CALYEAR     Calendar year
    0FISCPER     Fiscal year/period
    0FISCYEAR     Fiscal year
    0FISCVARNT     Fiscal year variant
    Key Figures
    InfoObject     Description
    0CRM_NUMDOC     Number of order headers
    0CRM_NUMOFI     Number of order items
    0CRM_LDOQV     CRM: Expected order quantity in VME
    0CRM_LDOQB     CRM: Expected order quantity in BME
    0CRM_DURLEA     Duration of the lead
    0CRM_EXDULD     Expected duration of the lead
    0CRM_NUMACT     Number of activities per lead
    0CRM_NUMCHL     Number of changes in the qualification level per lead
    0CRM_LEAWON     Won leads
    Units
    InfoObject     Description
    0SALES_UNIT     Sales unit
    0BASE_UOM     Base unit of measure
    InfoCube 0CSAL_C01 - CRM Activities.
    ODS Object 0SAL_DS01 (ODS for Activities)
    Query (technical name)     Query (description)
    0CSAL_C01_Q0006                    Success/Failure Analysis
    0CSAL_C01_Q0016                    Activity History
    0CSAL_C01_Q0002                     Intensity of Customer Care  (Owner) 12M
    InfoCube  Opportunities - 0CRM_C04 (SAP BW Business Content)
    InfoSources
    CRM Opportunities: Header Data - 0CRM_OPPT_H
    CRM Opportunities: Item Data - 0CRM_OPPT_I
    Query (technical name)     Query (description)
    0CRM_C04_Q0100                 Channel Management Sales Forecast
    0CRM_C04_Q001               Win/Loss Analysis for Opportunities
    0CRM_C04_Q002               Sales Volume Forecast
    0CRM_C04_Q003                 Pipeline Analysis per Phase
    Hope it will helps you a lot..........

  • Portal Content - Business Packages for CRM 7.0 and IC Webclient

    Hi all
    <p>
    We are looking at CRM 7.0 and SAP Netweaver Portal 7.0 integration.<br>
    I've noticed that the Business Package (BP) for CRM 7.0 contains very limited business roles for:<br>
    Channel ManagerChannel Manager<br>
    Partner Manager<br>
    Channel Manager (Telecommunications)<br>
    Partner Manager (Telecommunications)<br>
    Customer<br>
    Digital Asset Management<br>
    Incentives and Commissions<br>
    only.
    <p>
    In the past, there the BP for CRM 5.0 contains a lot more roles including customer service representatives and managers. Given that the standard business role export  (from CRM 7.0) and import (EP 7.0) does not work for IC Web client business roles, is there a standard way for functionality delivered in IC Webclient like Customer Service to be integrated into EP 7.0?
    <p>
    Otherwise, if we were to configure each BSP page individually for IC Webclient, will there be functions that do not work? eg: alerts, manager realtime view of CSR activities, call tracking, telephony integration etc..
    <p>
    Thanks!

    There are two approaches (that I'm aware of):
    - install external authentication (such as an LDAP which can be populated from the R/3 backends)
    - install an additional Java instance
    I would go for both of them because
    - it will make things easier if you implement other functionality that is in the portal (non-ESS)
    - it will avoid patching one portal and to keep the SPs of both backend systems in sync with the portal
    Markus

Maybe you are looking for