XI- CRM through IDOC adapter - error in outbound status of XI

I have set of messages created today, each of which have 10,000 records as well as same no. of idocs as outbound in XI.
only few messages have status 'messages processed' adn lot of messages are in staus 'Message Recorded (Commit follows)' and 'System Error (Restart Possible)'.
So only the expected idocs are not coming in CRM. But i see the idocs XI. i clicked on IDOC in outbound column of SXMB_MONI.
how can i restart the same message and get the idocs into CRM.
THanks for your help in advance.
Regards,
Jilan Bhasha

hi Agasthuri Doss,
Do you mean to Restart the message?
i tried restarting the message, then prompted with the below message.
Do you want to retain the trace level for the
selected messages (with errors) for the restart
or increase it (maximum level)?
i click on Retain, then the below error appears.
'You cannot restart XML message
E79C4320576611DBBAB10003BAD9E360 with this
status/type'.
Thanks & Regards,
Jilan Bhasha

Similar Messages

Basic Idoc Adapter Error - XI 3.0

Hi,
I am new to XI so excuse me if this is a basic question.
The scenario we have is File -> XI -> IDOC
When the message is processed into the IDOC Adapter I am getting the following error :
Control record must start with tag EDI_DC40 not E1LFA1M
Don't really understand this one as in the message mapping this segment on the target IDOC is disabled. It was my understanding that this segment is automatically filled by the IDOC Adapter.
Is there something I need to change in the Idoc Adapter to get this to happen ?
Kind regards
colin.

It is not a basic question, but it seems to be a common problem.
Check in your IDOC receiver channel, if the checkbox "Apply Control Record Values from Payload" is marked. If so, uncheck it. That should help.
Regards
Stefan

Metadata EDISDEF not maintained - Idoc adapter error

hi,
In our scenario, SenderParty->XI->R/3, we are using custom idoc to post into R/3. The idoc adapter throws an error, Metadata EDISDEF for port SAPXXX, IDoc type ZKAGXXX and CIM type not maintained, but when i use standard idoc, i don't get this error. We even applied oss note 837595 to fix authorization issue, but it didn't help.
Any ideas or suggestions.
Thanks
Pandari

One LAST suggestion. Looking at Note 837595, it doesn't seem to specify a value for authorization group (DICBERCLS). Try authorization group 'SS' (without quotes). So:
Object: S_TABU_DIS
Activity: 03
Auth. Group: SS
I recall now that a customer recently had this issue and (for them), this helped.
Jin

IDOC Adapter error while load balancing

Folks,
I am facing an issue when I am switching on Load balancing button in RFC destination while sending IDOC in sender system . The sender system shows this error in SM58
IDoc adapter inbound channel: Error Error when rea
Thanks,
Manish

Hi Manish...
This is from F1 on Traget host field in SM59..Check part in bold..
Name of target host
 Name of the target host as displayed by the UNIX command 'hostname'.
 If you are using load balancing, the target host must be the host name
 of the message server of the SAP System. This is defined in the profile
 parameter 'rdisp/mshost' of the target system. If you have any further
 questions, consult your system administrator. 
 You can specify host names as
 - Normal host names
 - Host names in DNS format (if DNS available)
 - IP addresses
 - SAProuter names (in the form /H/.../S/.../H/.../S/... )
Notes
 If you enter the host name (for example, hs0311) as the target host in
 an RFC destination, its IP address is stored internally in the database
 table RFCDES (destination administration). This speeds up the RFC
 connection initiation, since the host name does not need to be converted
 into its IP address.
 However, problems occur if the IP address of the target host changes.
 For this reason, you must adjust the RFC destinations if the IP address
 of the target host changes.
 If you specify the host name as a SAProuter name (/H/hs0311 instead of
 hs0311), it is not converted into its correspondidng IP address.
 Instead, it is stored in its SAProuter form in table RFCDES.

IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Hi
We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
Any help in this regard is highly appreciated.
Thanks
Pandiri

User Exit activation and fixing the issue in user exit fixed this issue.

IDOC Adapter error"ATTRIBUTE_INV_SND_SERV'

I am doing small example like Using HTTP Client to submit Order Response XML from my browser and Converting Order Response XML file to an order response IDOC of type ORDERS05 idoc. I have developed all the necessary objects in Integartion Repository & Integration Directory and posted the Order Response XML file through HTTP client.
I am getting the error message(in SXMB_MONI)like "Unable to convert sender service OrderResponse to an ALE logical system".
Appritiate, if some one help me On this .
Thanks
Sudha

For the business sytem you have to mention the adapter specific identifiers in the Integration Directory.
Go to Int. Directory -> Double Click on your IDoc Business System -> Menu -> Service -> Adapter Specific Identifiers
Maintain Logical System name and System ID and Client number.
Check the following blog.
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
regards
Shravan

IDOC Adapter Error

Hi All,
My scenario is JDBC to IDOC, where I am fetching data from Database and posting an IDOC in SAP. My ALE Configuration is correct. I have done the following steps:
In XI:
1. Created RFC destination to connect to ECC system
2. Created Port in IDX1
3. Imported Meta-data in IDX2
In ECC:
1. Defined Logical system
2. Partner Profile settings.
Still, I am getting the below error, not sure why is this occuring...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anyone help me out with what could be the cause of the error.
Thanks in advance.
Regards,
Amit

Hi Amit,
check this link
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
OR Check the receiver IDOC setting in my posting on Wiki
for File to IDOC scenario are u missing something
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
copy and paste complete link in URL or click here
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC& then Part3
Sachin
Message was edited by:
Sachin Dhingra

IDOC Adapter error / ATTRIBUTE_WRONG_INTF

Hi at all,
I have a problem regarding a interface sending IDOCs ( messagetype HRMD_A ) from one R/3 to another R/3 system via XI.
I have created a new Message Interface which has the Message Type of the imported IDOC typ ( HRMD_A06 ).
When the system tries to process the inbound IDOC I get the following message :

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>MI_HR_A_Cas</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface MI_HR_A_Cas</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Where can the problem be located ??
Why can't the IDOC interface be interpreted ?
I hope somebody can give me an advise.
Thanks
Florian

Hi Florian,
my solution:
Create a simple BPM which will handle your situation
BPM:
reveicer step -> check step -> (transformation one or two ) -> send step
in bpm you can use as many message interfaces (abstract idoc ) as you want
Regards,
michal
Message was edited by: Michal Krawczyk

IDoc Adapter error / oss note 856266

Hi all,
Has anyone else run into and successfully fixed the error described in oss note 856266? We ran into exactly this issue. Found the note by searching on the error message, downloaded and applied the correction instructions, all the while feeling pleased it was such an easy fix...
Nothing changed whatever though after the correction instructions were implemented. So either we did something dumb or the fix is not working for our system. Just wondered if anyone had similar experiences?
We are on Win2k/SQLServer/SP13
Cheers,
Chris

One LAST suggestion. Looking at Note 837595, it doesn't seem to specify a value for authorization group (DICBERCLS). Try authorization group 'SS' (without quotes). So:
Object: S_TABU_DIS
Activity: 03
Auth. Group: SS
I recall now that a customer recently had this issue and (for them), this helped.
Jin

RE:SENDER IDOC ADAPTER

Hi ,
why don't we crate a communication channel for idoc on sender side,but when we go for receiver side we create communication channel .
please let me know how an idoc converted in to idoc-xml while transfer to integartion engine from sender side.( with out idoc adapter on sender side)

hi prateek,
The communication at sender also passes through the Idoc adapter.
with our configuring idoc adapter on sender side, how can an idoc passes through idoc adapter, is this because idoc adapter resides in abap stack.
can u briefly describe how can an idoc convert in to idoc-xml before comming to integration engine.
if idoc adapter is on abap stack then
in case of file to idoc
why we go for idoc adapter . (con't the process same as reciver side) .
please give brief explain to each of my questions.

REG: Error in IDoc adapter outbound processing

Hi All,
      I had a couple of doubts regarding these IDoc's.
1)        I am dealing with the web services to IDoc Scenario. When i am activated my wed services it               is giving an error like
"IDOC_ADAPTER.ATTRIBUTE_BE_NOT_SUPP" and "Only asynchronous processing supported for IDoc adapter outbound processing"
Can any one help me to Solve my Problem
2) How to find out whether the IDoc is of synchronous or Asynchronous mode
    and how to handle the synchronous type of IDoc's
Thanks in advance.
with Regards,
Kalyan Dannapaneni.

Hi Kalyan,
IDOCs are only Aynchronous (EO or EOIO).
If you want to call Synchronious, you will have to find remote enabled function modules (RFCs, BAPIs).
Or you have to use the ccBPM Synch-Async pattern to have an synchronos call passed to an IDoc, waiting for the Acknowledgement. In your situation I would check if a similar BAPI/RFC exists on your Backend SAP system.
Best regards,
Silvia

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

XI FILE(FTP) - XI- CRM(Idoc adapter) scenario - restart message

Hello All,
I have scenario as below.
FTP->XI->CRM
The sender adatper is File Adapter, FTP.
Recv. adapter : IDOC adapter.
In CRM, there were middleware settings for idoc processing.
For an interface, in XI, i had a problem in getting a file of 10 Mb in size, so the file is split and i have made the XI sender adapter 'Z_PRICE_NEW20061004*.txt', so it picks all files within 5 mins and i have almost 104 XML messages.
Now the problem is a quite no. of message are ended up with error status in outbouond process in XI.
How can i reporcess the message? As the file is deleted from FTP? i ahve to do anything with the failed message.
A quick help is highly appreciated.
Thanks in advance.
Best Regards,
Jilan Bhasha

Hi ,
This weblog will help you....
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
sekhar

IDoc error on outbound side

Hi.
I'm setting up a communication with (JMS adapter -> XI -> IDoc adapter).
No w to the problem. When we send the message with the IDoc adapter we get the following error.
Message has error status on outbd. side
We can see this message when I put my cursor over the red flag in the outbound status column in SXMB_MONI.
I do not think there's anything wrong with the adapter because we are using it to send an other IDoc and that IDoc gets processed correctly to the target system.
What can cause the error on the that I get above?
BR
Kalle

Hi,
go to details of that transaction and check the error that caused idoc in outbound status failure...
an error tab can be seen in the outbound binding pipeline entry of that transaction and check the error caiused that
Rajesh

IDoc error :'Message has error at outbound side'.

Hi Experts,
am working on JMS-->IDoc, where TIBCO sends MBGMCR01 IDoc to ECC through XI .
in SXMB_MONI : shows red flag in outbound:with the message as 'Message has error at outbound side'.
please, suggest to solve the issue.
thank you,
MK

Hi
Have a look this
Message has error on outbound side in sxmb_moni
BPM - Message has error on the outbound side
Reprocess a message with error at outbound side

XI- CRM through IDOC adapter - error in outbound status of XI

Similar Messages

Maybe you are looking for