XI dcos

HI
FRIENDS IAM LOOKING FOR HELP I XI LIKE descriptions, docs, codes if there is..., examples...
THANKS
JYOTHI

Use the search and turn off your Caps Lock. Thanks!

Similar Messages

DISA to replace DCO...Not so fast

A colleague & friend sent me an article headlined DISA to replace DCO with new collaborative service tool and asked for my feedback. The headline was very curious to me as the terminology used might lead a reader to an incorrect conclusion. My intent is not to discredit the author of the article or the DISA program management quoted, but to provide clarity to the current 1 million+ users and mission owners who consume 800 million DCO minutes annually to get their job done.
"DISA to replace DCO”
DISA is in fact ending Defense Connect Online (DCO) service on May 30th, 2015. They are not replacing it. A replacement would (at even a depreciated level) support current priority workloads and corresponding mission support requirements (as identified by DCO users in 2014 survey, and summarized in side graph). Defense Collaborative Service (DCS), based on open source BigBlueButton project, is a no-cost capability for ad hoc collaboration and was never designed or intended to support DCO workloads.
“new collaborative service”
DCS webconferencing aka. 'BigBlueButton' is in fact a very new collaborative service. So new that the open source project has not reached a full version release (in the software world we call this beta or prerelease software). It is somewhat curious why DISA would go Full Operational Capability (FOC), with software that, by definition is not production quality. It is also curious why DISA would make this decision knowing that the customization required for FOC would render the software non-upgradeable to future project release versions. Congratulations DISA, you just got in the software development business.
"DCS tool”
So having clarified what DCS is NOT (DCO replacement & Production Enterprise Software), let’s summarize what DCS aka. BigBlueButton is by attribute:
Peer to peer & small team collaboration
Non-persistent meetings, rooms, files etc. (one time use )
Low scale capability
Maybe a more accurate headline would be DISA to end DCO to save DISA money and leave it at that....What do you think?
v/r,
Charlie Schoenberger
[email protected]

Waa Waa. I get that you are upset that the government will no longer waste 40 million per year for your product but bashing their choose to go open source reflects even more poorly on your organization.

Anybody knows where to download the dco.jar file????

hi,
do u guys know where i can download the dco.jar file ???
(Domino Collaboration Object - Lotus Domino)
It seems that i really cnt find it....
thanks

It's part of the toolkit, it seems. Some more googleing:
http://www-10.lotus.com/ldd/sandbox.nsf/ecc552f1ab6e46e4852568a90055c4cd/898382b7d610f43d88256ad4005899c8?OpenDocument
I wish you would search a little yourself.

Have we forgotten our Operational Force? DCO Ending 30-MAY

This morning I participated in an Adobe Connect (Defense Connect Online - DCO) meeting with the mighty forward elements of US CENTCOM. To say that they have been busy lately would be a galactic understatement. Over the years, CENTCOM has become one of the largest operational users of the Defense Connect Online system. Operational workloads include:
COP (Common Operational Picture)
BUB (Battle Update Briefings)
CUB (Command Update Briefings)
These activities are quite common amongst operational force and utilize DCO-S (SIPRNET) and are persistent activities that run on a cycle (24x7). They asked me, does DISA know what we do? Do they know that DCS / Ad Hoc capability does not support our workloads? It can be debated whether or not DCO started (circa 2008) as a mission critical operational system, today there is no question...the real question is...Have we forgotten our Operational Force?

In reference to this change in the Custom Reports... Better experience when exporting data - to prevent customer confusion when exporting data from Mac computers, we have removed the export to excel option and exporting in CSV format by default.
What is the customer confusion we are trying to stop here? I've got even more confused customers at the moment because all of a sudden they can't find the export to excel option but know it exists if they log in on a PC?
Mark

How to download photos from Mac to ipad when I get a "DCOS" error message ?

How to download photos from Mac to ipad when I get a "DCOS" error message ?

Hi Kcolleary,
Thank you for visiting Apple Support Communities.
I'm not sure what the error message says or whether you are on a Mac or PC, so please start with this article which gives a good starting point for troubleshooting update errors.
Resolve iOS update and restore errors in iTunes - Apple Support
If you have the error, that also links to a more focused article:
Resolve iOS update and restore errors - Apple Support
Take care,
Nubz

Is dco.jar "non-existent"????

hi,
i'm have been searching for dco.jar for 3 days now but i cant seem to find it.....
isit becoz dco.jar is somewhat "non-existent" and is replaced by either NOTES.jar, NCSO.jar or NCSOC.jar????
lost and confused

hi,
i'm have been searching for dco.jar for 3 days now
but i cant seem to find it.....
isit becoz dco.jar is somewhat "non-existent" and is
replaced by either NOTES.jar, NCSO.jar or
NCSOC.jar????
lost and confusedIs it not in the toolkit I linked for you?

What is an easy way to scan old photos? I have a brother DCO 7-4- printer scanner

what is an easy way to scan old photos? I have a brother DCP 7040 printer

Try Image Capture.
Eight amazing Image Capture tricks | Digital Photo | Macworld

The mother of all iChat AV problems

All the computers listed below can text chat among themselves but almost all of them cannot audio or video iChat AV with each other.
I hope you can follow along, as this will get very complicated. It is a hard story to tell.
I have been working on this for about 3 weeks now. I have read just about every post in the past 3 weeks. A 2nd Level Apple Tech Support person said I should post this for all to read because it encompasses so many problems all at once without any results and I have some interesting situations. I have tried every single suggestion in the forum without any results. I have spent hours on the phone with Apple iChat support, 2nd level Apple support and Linksys support. I’m an experienced iChat AV person and have been video conferencing for 10 years, starting back with CU-SeeMe. Actually did Beta testing for that CODEC. At the end of this, I will tell you what I haven’t tried yet, and it’s only one thing. And Ralph Jones of the UK, I have read every page of your website about ichat AV and tried everything on it. Thanks for the good work along with everyone else.
I’m the tech administrator for a Day Care Center. At the Day Care Center there are 15 Macs; 12 new 14 inch iBooks - 1.3 GHz with 756 MB RAM, one -15inch PowerBook 1 GHZ with 1 Gig RAM., an iMac 1 GHz with 1 Gig RAM, and one – 17inch 1.67 GHz PowerBook with 1 Gig of RAM.
My office has 2 Macs using iChat AV, a PowerBook 400 Titanium – 500 MB RAM and a G5 – Dual 2GHz – 3500 MB RAM.
All ADSL connections, all Verizon DSL. There are 8 different locations involved in this. 7 locations are using Linksys WRT54G routers, version 2 and 5’s, all updated to the latest firmware. My office is using a Linksys WRT54GS version 1 also updated to the latest firmware. 7 locations are using Westell 2200 DSL modems, and the one residential location that is DHCP is using a Westell 6100 Modem, the 6100 is set to default settings.
7 locations have static IP’s from the ISP and the 8th location is DHCP direct from Verizon (a typical residential set-up). Each location has 2 computers associated with it, all with iSight cameras. All 17 computers are using iChat AV through an AIM account.
All the computers are running OS 10.4.3 and are up to date as of this posting, including the J2SE 5.0 ver. 3 update and the Security Update 2005-009.
At my office and the office of the Day Care Center, all the computers are designated with a static IP. At the other locations the computers are DHCP, set to automatically get an IP from the router.
In all attempts to video iChat with all the computers, whenever an attempt is made, the 2 computers always get a video preview window and they say, “Starting video chat with …”, but then the dreaded responses always follow after trying to accept; “Did not respond”, “Fail to start video chat”, or “Cancelled the connection.”
So first, my office and the Day Care Office (DCO) have been video conferencing for over 1 year with iChat AV, but now we can no longer video chat. The only thing that changed was at both locations the routers went form an older Linksys WAP54G (A, B, & G) router to the WRT54GS ver. 1 at my office and a WRT54G ver.2 at the DCO a while ago. I can no longer video conference to the DCO nor can they video conference to me between any combination of the 4 computers at the 2 locations (a G5, PB 400, PB 1 GHz, iMac 1 GHz.). Not to long ago they all could video iChat with each other.
My office (with both computers) can iChat with the one location that is DHCP (the Verizon residential setup – both routers set to their defaults, no special stuff). But I can only video conference with the iBook not the PowerBook. In reverse, the iBook can call me but the PB can not. I have brought the PowerBook back to my office and it can video iChat back to the iBook at it’s location from the PowerBook that came from that location. The PB can even connect to my 2 computers on my router at my office. We did a 3 way to the iBook with my G5 hosting, the PowerBook at my office and the iBook at it’s location. When I take the PoweBook back to it’s original location (where the iBook is – the residential location) it can’t video conference with my office, no matter who calls whom.
In the remaining 6 locations, none of the computers can iChat with any of the other locations at all. I have only been able to iChat with the one location that is the Verizon DHCP location (residential setup) and only to the iBook not the PowerBook.
Now to get even weirder, as I said each location has at least 2 computers. At each of the 7 locations (but not my office), the 2 computers at that location, on the same router, can iChat between themselves over AIM (not BonJour) but they can not video chat with any of the other 7 locations.
All 17 computers connect correctly to the Apple iChat test sites: appleU3test01 and appleU3test03 at very good speeds. Oh speaking of speeds, when I first thought maybe it was a connection speed problem, I checked each location by downloading a file off the ISP’s server to check actual speeds, no connection is slower than 75 KB/s, most are plus 150 KB/s downloading the file. I tried 5 different DSL speed websites such as DSLReports.com and they are so inaccurate for testing speeds, they’re not worth using. I would get variations of speeds sometimes 400 to 500 Kbps difference between web services from the same computer at basically the same time.
To recap, my office G5 can only chat with one computer of the 17, the iBook at the Verizon residential setup. The PowerBook from the residential setup can chat back to its home connection to the iBook from my office only. None of the other computers can chat with each other from one location to the other. All the computers (except my G5 and the one iBook) can only chat with the other computer that is located on the same router.
I have concentrated on trying to get my office and the DCO connected. I have tried everything. That’s why after talking with Apple about this, the tech said to post this. Not many people will have so many computers simultaneously to work with. He even said I tried everything.
The one thing I haven’t tried is removing the Linksys router from both ends of a connection and just go through the Westell Modem. There is too much involved changing over the 2 offices or the other locations with all the computers at each location. I can’t afford to experiment that way with working business situations. These are not home environments.
I’m still not sure if the problem is an Apple thing with the latest updates or a router problem because the firmware updates have installed a lot of security stuff. I never had to even consider Port Forwarding or anything. iChat AV with the Linksys routers in their default settings just worked.
One odd thing I noticed while I did all this testing, if you have 2 computers at the same location that both have the same apple test site in the buddy list (example: appleU3test01) when one connects to the test site, the other computer lists the buddy as in use, and the second computer can not connect to it. As soon as the first computer disconnects, it becomes available to the second computer. You would think the test site can handle multiple people at the same time. In addition, each computer can connect to a different test site at the same time over the same router. I don’t know what it means, I just found it interesting.
Thanks for listening,
Jim

EZ Jim & Ralph, I appreciate your suggestions.
EZ - I have not had time to view entirely your website on ichat. It looks pretty complete. Too busy. Equipment conflicts I don't believe I have any. There is nothing on any of the computers except the iSight camera. No other external or internal equipment added. Very little software other than Microsoft Office 2004 and a cople of other things. They are not loaded with stuff, pretty basic.
Also each little network location works fine, the only thing I'm having trouble with is Video Chat. They all text chat to each other just fine, including the Windows machines (some locations have windows xp machines only).
Ralph - first - each Day Care location is in a different building around our community and each has a DSL line with it's own static IP from the internet service provider. Each location has one Westell Modem/Router 2200 that has been made into a modem, setting it up as a bridge as my service provider requested. And each location has a Linsys Router with the Static IP to the ISP. Each computer has it's own AIM address.
On the Modem I changed the IP address so it wasn't the same as the Linksys Router.
I want to say, I think like you that it's the modem. I got that feeling from your last post.
I have checked out my G5 and I can Video Chat to a lot of people (settings below). I restored it back to the way it was originally set up when I could video chat with the Day Care Center Office (DCCO). I can chat with my son (he has similar Linksys WRT54G Router, the version I still don't have, and an iSight camera), my parents (they have a cable modem, and an old Linksys A&G Router, iSight), my neighbor (I lent him one of my iSights, he has Verizon Fiber Optic and a Apple Extreme Base Station). All video chatted fine.
My Linksys is now set to defaults. I restored everything back. This is how it was prior to all the testing (port forwarding, etc.)
Security: Firewall protection is enabled. Block Anonymous Internet Requests, Filter Multicast, Filter IDENT (Port 113) are all checked and on. Filter Internet NAT redirection is not checked.
Administration: UPnP is Enabled.
Applications & Gaming: No Port Forwarding, No Port Triggering, No DMZ, No QoS.
The one thing different in all this is the Modem. I am using a discontinued Westel Wirespeed model; A90-210015-04.
My son is using the same type Router (different version) but a different Westell modem (I don't know which yet) He has Version DSL. The Router is set to defaults like mine is now and we conference fine.
The DCCO who I use to video chat with but can not now, has had the Modem and the Router changed. They had an old Linksys A&G router and an old discontinued Westel Wirespeed model similar to mine (the model I don't know yet). Now they have a Linksys WRT54G ver. 2 and a Westell 2200 Modem/Router (set up as a modem only).
So I'm going to work on the Modem theory first at the DCCO. I'm going to try to put the old modem back and see if it works. I can only do this on Fridays when only one person is in the office. I can't shut them down to test this. So I'll get back to you after Friday.
Thanks again for your good and helpful suggestions.
Jim
Gee, I wish they would have left the spell checker in this forum.

UK Payroll (NI Refund to Mr Jossep)

Hi Experts,
Requirement
Multiple Employee M Jessop was given a NI refund in March 2009
Detail
A refund of National Insurance contributions was made in March 2009.
We cannot understand why.
A refund is not due
The refund has not been reclaimed in April as an NIRA even though one was created in month 12 2009
Also her claim for £100 paid in March has been put back into the previous month for NI calc and a deduction of £9.40 made - Why?
Live SAP numbers 122338 priority, 234560 & 86867
She has many dead numbers
51358 is the only one that was ended in the 2008 / 2009 tax year
Please Provide me the Iputs on this Issue, i am New UK -Payroll.
Kind Regards
Githa

Ramana ,
I am new to UK Payroll .Kindly send me NI Configuration Dcos (UK),So that i can Understand Easily.
Kind Regards
Githa

[SOLVED] (U)EFI dualboot Win7 Arch Linux - partitions gone - recovery?

Hi everybody,
I have a slight problem with my (U)EFI dualboot system (Windows 7 and Arch Linux) which used to be configured using rEFInd like it is described in my previous post:
https://bbs.archlinux.org/viewtopic.php … 6#p1300356
<EFI PARTITION> is /dev/sda1 and I used to boot via <EFI PARTITION>\EFI\Boot\Bootx64.efi which then successfully either loaded Windows or Linux kernel.
Thanks to my own stupidity and a recent update of refind I decided to copy the new driver, font and icon folders to the <EFI PARTITION> in order to be up-to-date.
After doing so, the rEFInd boot menu had a third icon which said "Boot via \EFI\Boot\Bootx64.efi" and if I clicked on it a second rEFInd boot menu appeared with only the two icons for Windows 7 and Arch.
So I figured I could delete Bootx64.efi and ultimately did so, unfortunately. Afterwards I couldn't boot neither Windows nor Linux anymore.
Following this I went through my noumerous USB boot sticks in order to be able to recover the Bootx64.efi. Unfortunately the first USB stick was a Windows XP one which has the plop bootloader alongside:
http://www.plop.at/en/bootmanager/thebootmanager.html
Out of couriousity I entered this bootloader and found HDA and HDB (I assume resembling my SSD and my USB stick).
To my knowledge I didn't change anything but after entering the bootloader again I just found HDA left, HDB seemed to be gone. But I didn't think of anything bad happening yet.
Then I found a working Archiso which I booted and using blkid I couldn't find the partitions of my earlier system anymore, only its device and the USB stick:
/dev/sda: PTUUID="..." PTTYPE="gpt"
/dev/sdb1: UUID="..." LABEL="ARCH_201312" TYPE="..." and so on
/dev/sdb2: SEC_TYPE="msdos" and so on
Even within the EFI shell I could not detect any internal drive anymore (only fs0: which is the USB stick)
Using Archiso onboard tool testdisk I could find the old partitions. The correct result of the GPT from testdisk is:
Fri Jul 4 08:45:25 2014
Command line: TestDisk
TestDisk 6.14, Data Recovery Utility, July 2013
Christophe GRENIER <[email protected]>
http://www.cgsecurity.org
OS: Linux, kernel 3.12.1-3-ARCH (#1 SMP PREEMPT Tue Nov 26 11:17:02 CET 2013) x86_64
Compiler: GCC 4.8
Compilation date: 2013-08-06T08:42:31
ext2fs lib: 1.42.8, ntfs lib: libntfs-3g, reiserfs lib: 0.3.0.5, ewf lib: none
/dev/sda: LBA, HPA, LBA48, DCO support
/dev/sda: size 500118192 sectors
/dev/sda: user_max 500118192 sectors
/dev/sda: native_max 500118192 sectors
/dev/sda: dco 500118192 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - 1 sectors, sector size=512
Hard disk list
Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63, sector size=512 - Samsung SSD 840 PRO Series, S/N:S12RNEAD322171L, FW:DXM04B0Q
Disk /dev/sdb - 2013 MB / 1920 MiB - CHS 1022 62 62, sector size=512 - SMI USB DISK, FW:1100
Disk /dev/sdc - 4210 MB / 4015 MiB - CHS 1020 130 62, sector size=512 - Generic Flash Disk, FW:8.07
Disk /dev/mapper/arch_root-image - 1478 MB / 1410 MiB - 2887680 sectors, sector size=512
Disk /dev/dm-0 - 1478 MB / 1410 MiB - 2887680 sectors, sector size=512
Partition table type (auto): Intel
Disk /dev/sda - 256 GB / 238 GiB - Samsung SSD 840 PRO Series
Partition table type: EFI GPT
New options :
Dump : No
Align partition: Yes
Expert mode : Yes
Analyse Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63
hdr_size=92
hdr_lba_self=1
hdr_lba_alt=500118191 (expected 500118191)
hdr_lba_start=34
hdr_lba_end=500118158
hdr_lba_table=2
hdr_entries=128
hdr_entsz=128
hdr_size=92
hdr_lba_self=500118191
hdr_lba_alt=1 (expected 1)
hdr_lba_start=34
hdr_lba_end=500118158
hdr_lba_table=500118159
hdr_entries=128
hdr_entsz=128
Trying alternate GPT
Current partition structure:
Trying alternate GPT
search_part()
Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63
FAT32 at 0/32/33
FAT1 : 4110-6150
FAT2 : 6151-8191
start_rootdir : 8192 root cluster : 2
Data : 8192-2097151
sectors : 2097152
cluster_size : 8
no_of_cluster : 261120 (2 - 261121)
fat_length 2041 calculated 2041
set_FAT_info: name from BS used
FAT32 at 0/32/33
MS Data 2048 2099199 2097152 [NO NAME]
FAT32, blocksize=4096, 1073 MB / 1024 MiB
NTFS at 146/251/42
filesystem size 249593856
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
NTFS part_offset=1209008128, part_size=127792054272, sector_size=512
NTFS partition cannot be added (part_offset<part_size).
NTFS at 146/251/42
filesystem size 249593856
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
MS Data 2361344 251955199 249593856
NTFS, blocksize=4096, 127 GB / 119 GiB
recover_EXT2: s_block_group_nr=0/160, s_mnt_count=1318/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 5242880
recover_EXT2: part_size 41943040
MS Data 251955200 293898239 41943040
ext4 blocksize=4096 Large file Sparse superblock, 21 GB / 20 GiB
recover_EXT2: s_block_group_nr=0/80, s_mnt_count=1317/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 2621440
recover_EXT2: part_size 20971520
MS Data 293898240 314869759 20971520
ext4 blocksize=4096 Large file Sparse superblock, 10 GB / 10 GiB
recover_EXT2: s_block_group_nr=0/706, s_mnt_count=1317/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 23156049
recover_EXT2: part_size 185248392
MS Data 314869760 500118151 185248392
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
Results
P MS Data 2048 2099199 2097152 [NO NAME]
FAT32, blocksize=4096, 1073 MB / 1024 MiB
P MS Data 2361344 251955199 249593856
NTFS, blocksize=4096, 127 GB / 119 GiB
P MS Data 251955200 293898239 41943040
ext4 blocksize=4096 Large file Sparse superblock, 21 GB / 20 GiB
P MS Data 293898240 314869759 20971520
ext4 blocksize=4096 Large file Sparse superblock, 10 GB / 10 GiB
P MS Data 314869760 500118151 185248392
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
interface_write()
1 P MS Data 2048 2099199 2097152 [NO NAME]
2 P MS Data 2361344 251955199 249593856
3 P MS Data 251955200 293898239 41943040
4 P MS Data 293898240 314869759 20971520
5 P MS Data 314869760 500118151 185248392
simulate write!
TestDisk exited normally.
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
Now the question is: Can I - using testdisk or any other tool - recover those partitions successfully so I will be able to boot again afterwards? I tested and I could mark them as:
P Primary
Any help will be greately appreciated.
Best regards
Last edited by blablubb1234 (2014-07-08 09:20:08)

Issue resolved If you care to know how, read on:
Looking at the disk using gdisk was doing no good. Neither of the recovery options in gdisk did the trick.
I then returned to testdisk and restored the partitions (successfully). However, afterwards I was greeted by shell telling me the root device was not found (seems like UUIDs get changed when one restores them using testdisk). Adjusting the PARTUUID for root in <EFI SYSTEM PARTIITION>/boot/refind_linux.conf did the trick and I could boot up Archlinux again.
Windows 7 still didn't boot telling me the required device was inaccessible (probably wrong UUID, too). I could however not restore/edit Windows' BCD using bcdedit, see my post Status: 0xc0000225 boot selection failed; required device inaccessible:
To make a long story short: Removing bcd and running autorecovery from withing Windows RE successfully created a new bcd. Unfortunately, Windows writes its backup bootloader at <EFI SYSTEM PARTITION>/boot/EFI/Boot/bootx64.efi. This file originally was a copy of refind_x64.efi which I need to put at that location to be able to dualboot. After chrooting to my Arch system I could restore bootx64.efi, create a new fstab and everything is running fine now again.
Best regards and thanks for the help.

OC4j in Jdev 10.1.3.5 fails to start

Hi,
I just installed jdev 10.1.3.5 and cannot get the oc4j server to start. My application compiles just fine. I also tried using just a single jsp file. Both error with the same message.
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\jdev\system\oracle.j2ee.10.1.3.43.6\embedded-oc4j\config>
C:\jdk\bin\javaw.exe -client -classpath C:\j2ee\home\oc4j.jar;C:\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=hillproxy.hill.afmc.ds.af.mil -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.dco.dod.mil|fohocs.enterprise.afmc.ds.af.mil|*.infra|152.229.108.80|*eis.afmc.af.mil|*4800.ogden.disa.mil|*mail.*.afmc.af.mil|10.*|172.16.2.17|199.10.65.150|137.7.9.117|137.244.160.185|129.61.29.19|129.61.150.12|129.52.154.0*|152.80.49.210|131.77.*|137.241.*|*.hill.afmc.ds.af.mil|*.hill.af.mil|localhost|127.0.0.1|NBIT-72GDHD1 -Dhttps.proxyHost=hillproxy.hill.afmc.ds.af.mil -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.dco.dod.mil|fohocs.enterprise.afmc.ds.af.mil|*.infra|152.229.108.80|*eis.afmc.af.mil|*4800.ogden.disa.mil|*mail.*.afmc.af.mil|10.*|172.16.2.17|199.10.65.150|137.7.9.117|137.244.160.185|129.61.29.19|129.61.150.12|129.52.154.0*|152.80.49.210|131.77.*|137.241.*|*.hill.afmc.ds.af.mil|*.hill.af.mil|localhost|127.0.0.1|NBIT-72GDHD1 -Xverify:none -XX:MaxPermSize=256m -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdev\system\oracle.j2ee.10.1.3.43.6\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
09/10/06 20:23:58 WARNING: Bulk-load class 'oracle.core.ojdl.query.LogQueryException' not found in oc4j:10.1.3
09/10/06 20:23:58 WARNING: Bulk-load class 'oracle.core.ojdl.query.LogRepository' not found in oc4j:10.1.3
09/10/06 20:23:58 WARNING: Bulk-load class 'oracle.core.ojdl.reader.LogRecord' not found in oc4j:10.1.3
09/10/06 20:23:58 WARNING: Bulk-load class 'oracle.j2ee.ws.server.WebServiceProcessor' not found in oc4j:10.1.3
09/10/06 20:23:58 WARNING: Bulk-load class 'oracle.j2ee.ws.server.WebServiceServlet' not found in oc4j:10.1.3
09/10/06 20:23:58 WARNING: Bulk-load class 'oracle.security.xmlsec.wss.username.UsernameToken' not found in oracle.xml.security:10.1.3
OC4J startup failed
oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: oracle.dms.instrument.NounIntf
     Dependent class: oracle.classloader.util.MainClass
     Loader: sun.misc.Launcher$AppClassLoader@14916158
     Code-Source: /C:/j2ee/home/lib/pcl.jar
     Configuration: unknown
     at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2194) [C:/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
     at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1726) [C:/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1682) [C:/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1667) [C:/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
     at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap:1.5.0_06]
     at java.lang.Class.getDeclaredMethods0 (Native method) [unknown, by unknown]
     at java.lang.Class.privateGetDeclaredMethods (Class.java:2365) [jre bootstrap, by jre.bootstrap:1.5.0_06]
     at java.lang.Class.getMethod0 (Class.java:2611) [jre bootstrap, by jre.bootstrap:1.5.0_06]
     at java.lang.Class.getMethod (Class.java:1579) [jre bootstrap, by jre.bootstrap:1.5.0_06]
     at oracle.classloader.util.MainClass.invoke (MainClass.java:92) [C:/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
     at oracle.oc4j.loader.boot.BootStrap.main (BootStrap.java:41) [C:/j2ee/home/oc4j.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
Process exited with exit code 0.
Any help would be appreciated.

project properties -> run debug configuration-> tools settings -> Make project when run

CONTROL_NOT_FOUND dumps in VT02N

Hello,
We have been experiencing a recurring dump in VT02N with error 'CONTROL_NOT_FOUND'. In the system log, the error details read as follows:
The termination occurred in the ABAP program "SAPLSPO5" in "%_CTL_OUTPUT"
The main program was "SAPMV56A ".
The termination occurred in line 30 of the source code of the (Include) program "<SYSINI>" of the source code of program "<SYSINI>" (when calling the editor 300).
This is the code extract from program SAPMSSYD where the dump supposedly occurred:
000270 * Nach DCO
000280 module %_CTL_OUTPUT output.
000290 perform %_CTL_OUTPUT in program SAPMSSYD using SY-REPID if found
> endmodule.
The activities in VT02N when these dumps happened are detailed below:
Enter shipment #-execute
Uncheck planning
Look for delivery #
Minus out delivery#
Save (when saving it takes you back to the beginning of vt02)
Enter
Check planning (this is where it sometimes will not check and it will freeze and will take us to an error message)
What confuses us is this error does not always happen when the process above is done. Until now, we are unable to replicate the dump at will, though it still happens frequently. And we still cannot identify what causes them.
Could someone help us figure out why this is error is happening?
Thanks a lot for you help.
Best Regards,
Gladys

Have you looked for OSS notes on this topic?
Also, have you checked if the SAP GUI is the latest on the machine that is getting the error? It should be 6.4 patch lvl 19.
To isolate the problem, take one user that is getting the error, and upgrade the GUI. Then ask him to re-try for a while to see if it happens.
I've found this on the OSS:
OSS NOTE 794329
Symptom
You got an exception 'invalid dynpro processor state' and an abap dump with CONTROL_NOT_FOUND. In the frontend trace file with the name like sapfewdll_xx_xxxx_xx_xxxx_xxx.trc and sapfewdll_xx_xxxx_xx_xxxx_xxx.err.trc you can find the line:
Error: wrong modal number: 1
Other terms
Focus, error "wrong modal number: 1"
Reason and Prerequisites
Program error.
The focus was set to a disabled modal popup because of the wrong "last focus"
Solution
A solution is provided in patch level [7] of SAP GUI for Windows [640] and patch level [52] of SAP GUI for Windows [620]
Install this patch or a newer patch. Refer to notes 563161 and 330793 for information on storing and downloading patches. For queries concerning the installation of patches, see note 361222 (for SAP GUI 4.6D or lower) or note 535308 (for SAP GUI 6.20 or higher).
Good luck!
Leonardo De Araujo

An alert messarge i don't underdant: insane object at BDHP + 83ACC in "VI name's":{graphics} (0x80):Front Panel Terminal (Term)

Hello!
I don't know why in just yesterday appear in one of my VI an alert message or error message when i want to close oer save the VI.
The message is like the following one:
Insane object at BDHP + 93ACC in "Vi name's": {graphics} (0x80}: Front Panel Terminal (Term)
I don't know why now it appears this message because i have no modify the Vi.
I want to ask you why it appears this message and the most important......how can i solve it?
Thank you very much
Larson

Hi!!! I copy and paste from an NI engineer post asking about what is the "insane object" problem:
This message means that an object in LabVIEW such as a wire or a loop tunnel does not pass an internal test known as a sanity check. If the errors are serious enough, LabVIEW exits because something has become very corrupted. Sanity checks occur before each save, to ensure that corrupted VIs are not written over good VIs. They also happen as part of the compile process. Thus, sanity checks happen frequently. Many insanities are actually fixed (made sane) after the dialog box appears and will not appear again, so the first thing you should do after receiving an insane object error is to try to make a backup copy of the VI, run it, and perform some additional editing to see if the problem was resolved automatically.
VI corruptions do not happen often. They can happen because of disk corruption, but this will often lead to a file that can no longer be loaded. Corruptions can also happen because the programmer did something that corrupts a LabVIEW data type, perhaps as the result of a call to external code. The following are examples of insane object errors:
Insane Object at BDHP+4D50 in 'sksks.vi': (graphics) (0x80):wire segment (WIRE)
Insane Object at BDHP+5CA0 in "CAPL3.vi": (graphics) (0x80):loop tunnel (DCO)
In the first example above, the error message itself gives information about which object is insane. BDHP means the offending object exists on the block diagram heap, as opposed to the FPHP for front panel heap. The +4D50 is the hex offset in the heap where the object is located. The "Wire Segment" text indicates that the object is a wire object. The "graphics" text indicates that the insanity is graphics-related, which means it is not serious and will most likely be repaired automatically.
The second message above is similar, but refers to a loop tunnel (i.e., the tunnel formed where a wire crosses the edge of a loop) rather than a wire.
Solution: If you receive an insane object message, it is best to delete and recreate the most recently created objects on either the front panel or block diagram, depending on whether the error message contains "FPHP" or "BDHP". Make use of the text in the error message in deciding which objects to rebuild. In the case of the second message above, it would be best to delete and recreate the most recently created loop tunnels.
Another workaround that works best if the VI is small is to select the entire diagram and copy it to a new VI. After saving the new VI, there is a good chance the insane object error will no longer appear. If the VI is too large to cut and paste to a new VI and another computer with an identical version of LabVIEW is available, you can copy the VI to disk (or to your network if that is available) and open it on the second machine. If the insane object errors do not appear, save the VI (on the second machine) and transfer it back to the original PC (by disk or by network). The new, uncorrupted version of the VI should now run without generating the insane object error.
Hope that helps you,
Jaime
Regards,
Jaime Cabrera
NI Applications Engineering Spain

Program "SAPLSZA1" tried to use screen 0000 - vendor display XK03 - dump

Hello,
when i try to display vendor (XK03) program SAPMF02K falls into dump. Problem is in calling subscreen into address area.
CALL SUBSCREEN ADDRESS INCLUDING 'SAPLSZA1' '0300'.
this is dump:
The termination occurred in the ABAP program "SAPLSZA1 " in "%_CTL_INIT".
The main program was "SAPMF02K ".
The termination occurred in line 25 of the source code of the (Include)
program "<SYSINI> "
of the source code of program "<SYSINI> " (when calling the editor 250).
Source code extract
000010 * ABAP-System Include for all programs
000020 constants SPACE value ' ' %_predefined.
000030
000040 * SYST-Felder als SY-Felder ansprechbar machen.
000050 tables: SYST,
000060 sy %%internal%%.
000070 *
000080
000090 tables RSJOBINFO. "for SUBMIT .. VIA JOB ..
000100
000110 data: begin of common part %_SYS%%,
000120 SCREEN type SCREEN,
000130 %_PRINT type PRI_PARAMS,
000140 %_ARCHIVE type ARC_PARAMS,
000150 end of common part.
000160 *
000170 data: %_VIASELSCR type X value '04' %_predefined.
000180
000190 system-exit.
000200 perform (SY-XFORM) in program (SY-XPROG).
000210
000220 * Nach Laden des Dynpros
000230 module %_CTL_INIT output.
000240 perform %_CTL_INIT in program SAPMSSYD using SY-REPID if found.
 > endmodule.000260
000270 * Nach DCO
000280 module %_CTL_OUTPUT output.
000290 perform %_CTL_OUTPUT in program SAPMSSYD using SY-REPID if found.
000300 endmodule.
000310

Hi,
I have checked OSS Note Number 1037961 which is giving somewhat the same Error Description as per your query. Below is the summary of this OSS Note.
Check whether this is useful for you.
Summary
Symptom
When registering in the R/3 E-Commerce 5.0 B2C webshop the
process finishes without any error messages, but if you go to the user details the address data is missing.
The R/3 system has created the customer but when displaying with XD03
the system dumps in program SAPLSZA1 : screen 0000 does not exist.
This issue occurs only in ECO ERP 5.0
Thanks,
Satya

Unable to create working dynamic distribution list based on manager

Hi,
I am struggling to create a working dynamic distribution group. I am following the instructions at http://help.outlook.com/en-gb/140/Dd264647.aspx.
My intent is to create DDG's based on a user's manager and their job title. In my org, sales managers will typically have 3 teams reporting to them. In our AD, this would be marked by a 3-4 letter acronym in the job title field (CSO,DCO,SDCO).
I am trying to create distribution groups for use by their manager by having the manager and job title item as the filter, using the following script:
New-DynamicDistributionGroup -Name "GROUPNAME" -RecipientFilter {(RecipientType -eq 'UserMailbox') -and (manager -eq 'Managername') -and (title -eq 'ACRONYM')}
As an aside, I am unable to find if the manager object should be an alias, upn or ad object. I've tried with all with no success.
No matter what permutations of the above script I try, nothing seems to work. The group creates, but does not work at all.
Any help you can provide would be very much appreciated!

Hi Ed,
I did try that, and as it turned out, I was using the wrong powershell from the start.
The commands above are for Office 365, not on-prem Exchange 2013. Having spoken to Microsoft, it seems like the AD object for manager may not be a filterable option at all, I'm waiting to hear back.
If this can help jog anyone's mind, the commands we're looking towards now look something like this:
New-DynamicDistributionGroup -Name "testname" -Alias "testname" -IncludedRecipients "MailboxUsers,MailContacts" -OrganizationalUnit "domain.local/users" -ConditionalDepartment "Test" -RecipientContainer "domain.local"
We're still looking for a filter for manager in there, and I'll update the thread if I get anything worthy of note. Bear in mind that it's going to be difficult to settle for anything less than the manager object to filter by, as our requirements pretty
much demand it.
Thanks all.

XI dcos

Similar Messages

Maybe you are looking for