XI Demo config document for IDOC
Hi,
As per the demo doc section "5.1.4 Specifying the ALE Distribution Model (SALE)",it expalins about configuring IDOC messages to be send from R/3 to XI.Why should they add BAPI to this distribution module view XI-IDoc instead of the Idoc message type.Do i miss any thing?
Thanks,
Bharath
Hi,
one more thing:
have you registerd your queues?
sxmb_adm - manage queues
in the integration server and application servers?
if not do that and try testing your application once more
Regards,
michal
Similar Messages
-
Transaction document for Idoc type
Hi Experts,
I am seeking little information about below Idoc type from POS to SAP IS Retail,
I would like to know that, what are the transaction documents generated in SAP IS Retail after executing of below inbound idoc type.
For example WPUUMS – It will create billing document for aggregate sales and material document for Goods movement.
Similarly, please help me for below Idoc type.
· WPUBON
· WPUTAB
· WPUBWB
· WPUFIB
· WPUKSRHi Vanrajsinh,
I'd recommend you to go through the help.sap.com POS Inbound Interface for general information;
POS Interface - Inbound @ help.sap.com
and then crawl through related customizing in SPRO: Sales & Distribution > POS Interface > Inbound where you'll find the document types corresponding to individual IDoc types and IMG documentation per activity is also quite 'explicit'.
Not to leave you only with links, more information below but document types generated depend on the above config;
WPUBON - POS interface: Upload sales docs (receipts) non-aggregated;
Usually creates billing document and article document to post sales and goods issue per receipt, billing type and movement types can be defined in SPRO POS as above > Control Sales per receipt
WPUFIB - POS Interface: Upload Financial Accounting Interface SRS/POS
creates only FI posting (accounting documents) for pre-defined POS financial transactions; SPRO POS as above > Transaction Types for Financial Transactions and Trans.Type Cotrol of Fin.Trans.
WPUKSR - POS Upload Cashier Data
Cashier statistics, I've only used it for statistics (RIS, no transaction documents created)
WPUTAB - POS interface: Upload day-end closing POS / Payment List
Creates billing document to post payment per payment type if not already posted via receipts, SPRO POS as above > Payment List Control
WPUUMS - POS interface: Upload sales data (compressed)
as WPUBON but aggregated sales, SPRO POS as above > Aggregated Sales Control
WPUWBW - POS interface: Upload goods movements
Creates article documents to post goods movements
Note that you usually do not use all IDoc types at the same time as this would lead e.g. to posting a single receipt via multiple flows.
Hope this helps!
Regards,
Tomas -
Config Documents for Implementing Solution Monitoring and CHaRM
Hello Experts:
We have installed the SolMan 7.0 and completed the basic setup. The next steps are to Implement the Monitoring and CHaRM. Can you pls provide me with the config documents or the links to implement Monitoring and CHaRM.
Thanks in Advance
Jameshi,
You can get the overview document as well as SAP Tutor which will explain step by step configuration in details which are available at http://service.sap.com/rkt-solman
Once you get into rkt-solman, choose Solution Manager on the leftside.
On the rightside:
1. Select Solution Manager 7.0 .
2. Continue to select Role as "Supp Organizations/Serv Providers".
3. Click "Open" in "Change Request Management Open/Close".
Then find the folowing:
https://service.sap.com/~sapidb/011000358700000059722008E
https://service.sap.com/~sapidb/011000358700005479242006E.sim
https://service.sap.com/~sapidb/011000358700000086572008E.sim
https://service.sap.com/~sapidb/011000358700002931432006E.sim
Also read the blog which may help you:
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
ChaRm and CTS+ configuration
there are also a few good examples
First steps to work with Change Request Management scenario
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
Change Request Management scenario: Usual questions
https://weblogs.sdn.sap.com/cs/junior/view/wlg/15116
Change Request Management scenario: Working examples
/people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
Thnx,
Waseem. -
CONFIG.DOCUMENTS FOR OVERHEAD SETTINGS
Hi
Can anyone help me to send the step by step configuration document to do the settings for overhead costs as it has to be added with our semi / finished stocks.
My maid ID [email protected]
Thanks
G. JanaHi Satya,
while configuring a system first it is always useful to go through the help.sap.com as Vijay directed you there, thanks Vijay!!
If you already have a picture of the entire system config in that area you are looking for, go to the IMG with the TA SPRO and check out the documentations for all the nodes you are reuqired to customize.
In these documentations you will find descriptions, enabled values, etc for that special setting.
Rock that!
Best regards,
Zsolt -
Elements of Config document.
Hi,
I have to prepare a configuration document for an impementation project.
As a Consultant, what are all the cares and importance have to be given while preparation of a configuration document.
And who will be the intended audience for a configuration docuement.
Regards,
R. Dillibabu.Hi
The important elements of a good Config Document (for each Config element) are:
1. Use
2. Prerequisites
3. Procedure
4. Screen Shots
An extract from a good config doc is reproduced below:
<b>Maintaining Storage Locations for Plants</b>
<i>Use</i>
A Storage Location is the place where the physically materials are kept within a plant.
<i>Prerequisites</i>
Plants must have been created.
<i>Procedure</i>
1.To carry out the activity, choose one of the following navigation options:
a.Transaction Code OX09
b.IMG Menu: Enterprise Structure ->Definition ->Materials Management ->Maintain Storage Location
2.System will give a popup screen where in system will ask for a Plant for which you want to define Storage Locations.
3.Please input the value XXXX in the Plant field, and press Enter to continue.
4.Click on New Entries pushbutton to create new Storage Locations.
5.Similarly do for the other plants.
Finally Paste the screen shots.
The audience for the config doc is the respective (MM, FI, etc) consultant from the Client's team.
Thanks -
Can any body share the config document for
Travel and expenses
Thanks in advanceCan any body share the config document for
Travel and expenses
Thanks in advance -
Hi,
Can anyone send me the config document for DME. Harish402gmail.com
Matter utmost urgent.
Points will be suitably rewarded.
Thanks & Regards,
HarishSent!
Assign points if info helps.
Vj
PS: A good practice is to update business card with email address instead of mentioning email add directly in the thread/post. -
Travel Managment Config Document
HI Gur's,
any one can send me step by step config documents for Travel Management.....to this id...[email protected]
regards
JKhi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FITVPLAN/FITVGENERIC.pdf
nagesh -
How to config History Log Changes Document for Mkt Plan/CPG/TP?
Working in SAP 4.0...
Dear Expert,
I want to save the document changes for Marketing Plan, Campaign and Trade Promotion.
How to config the document changes, since the information that recorded not complete.
Please help....
BR,
RobinHello Robin,
In CRM 4.0 follow the below path:
SPRO --> Customer Relationship Management --> Marketing --> Marketing Planning and Campaign Management --> General Settings --> Edit Categories for Change Documents
Then maintain the entry for application as MKT for each entry, then under object type: CPG, CPT, MPL, MPT, TPM, TPT and then Check box the entry under change document for all the entries.
If you want to display the change log history use report : CRM_MKTPL_CD_DISPLAY in CRM 4.0
Thanks & Regards
Raja Pamireddy
CRM Marketing Forum Moderator -
What is the internal processing for idocs
Dear friends this is subbu working as a abap consultant.
can any body explain the how idocs are transfered (inbound process and outbound process)1.Here out bound means sender.Inbound mens --receiver.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
There are two filtering in IDoc.
Segment Filtering:
Segment filtering can be achieved using T/Code BD56. Here you can suppress a whole segment irrespective of data inside it . You have to give Message Type / Sender Prrtner / Receiver Partner.
Data Filtering:
Data filtering can be done in dustribution model (BD64) where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Please check this link for more information.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Reward points.. -
R3 settings for IDOC-IDOC scenario
Hi,
For IDOC to IDOC scenario what are the settings we have to in R3 System other than XI configuration settings.
What are setting for both sender and receiver side.
Thanks,
KishoreHi Kishore,
http://help.sap.com/saphelp_nw04/helpdata/en/18/22b800773211d396b20004ac96334b/content.htm
http://www.erpgenie.com/index.php?option=com_content&task=view&id=346&Itemid=57
http://searchsap.techtarget.com/loginMembersOnly/1,289498,sid21_gci994575,00.html?NextURL=http%3A//searchsap.techtarget.com/expert/KnowledgebaseAnswer/0%2C289625%2Csid21_gci994575%2C00.html
http://www.thespot4sap.com/Articles/SAP_ALE_Other_Concepts_Conclusion.asp
Refer this material..
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
You can directly create an iDoc using some transaction like...
Use TCODE bd10 - to Send Data
and TCODE bd11 - to Get Data
and you can check the IDoc List using TCODE we02.
As you want step by step procedure.
1. Define Logical System and Assign Logical System
TCODE sale
2. Define RFC
TCODE sm59
3. Define Port
TCODE we21
4. Define Partner Profile
TCODE we20
5. Define Distribution Model
TCODE bd64
6. Send Data
TCODE bd10
7. Get Data
TCODE bd11
8. IDoc List
TCODE we02
There are basically two types of IDOCs.
Basic IDOCs
Extended IDOCs
Idoc Components
Basic Idoc
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extension Idoc
Extending the functionality by adding more segments to existing Basic IDOCs.
Creation of IDoc
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Create IDOC Type
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
u can also check all these links related to idocs
http://www.allsaplinks.com/idoc_sample.html
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sappoint.com/abap.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296858_idx0_off50,00.html
http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm
Reward points if this helps
Regards
Pragathi. -
Need docs. for IDoc & RFC
Hi All,
Please help me with documents of IDoc & RFC.
Thanks in advance.
Regards,
SreeHi,
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
RFC and BAPI:
RFC is Remote Function Call - a function module, which can be called remotely from outside
BAPI is also a Remote enabled function module but the difference between BAPI and RFC is in BAPI there is a bussiness object attached to it which calls SAP application internally.
can you explain RFC and BAPI???
The difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
RFC is the protocol used to call functions in an R/3 system by a caller external to R/3 or to call programs external to R/3 from an R/3 system. Functions can only be called via RFC, if they are tagged as RFC functions in the SAP development workbench. They are then called RFC function modules. BAPIs are complete sets of (BAPI) function modules that model a business application.
RFC is the protocol used by SAP for remote communication, that is, for communications between remote independent systems.RFC is used for communications between two independent SAP systems, or for communications between an SAP system and a non-SAP system, such as an external application. It can also be used for communications between modules on the same system.Using the RFC interfaces you can extend the functionality of R/3 applications from an external program.
An R/3 system also contains Business Application Programming Interfaces (also called Business APIs, or BAPIs), which provide a programming interface to business objects. BAPIs are a set of methods for working with and manipulating SAP business objects.Internally, BAPIs are implemented as function modules stored in the R/3 Function Builder. Each BAPI has an equivalent internally-named function module. However, you should use the BAPI and not the function module behind it, because the BAPI provides a stable, object-oriented view of R/3 applications and data. The internal function modules or even the fact that the BAPIs are implemented as function modules are not guaranteed to remain the same in future releases of R/3.
BAPI stands for Business Application Programming Interface.
It is a library of functions that are released to the public
as an interface into an existing SAP system from an external
system.
RFC is the protocol used to call functions in an R/3 system
by a caller external to R/3 or to call programs external to
R/3 from an R/3 system.
Functions can only be called via RFC, if they are tagged as
RFC functions in the SAP development workbench. They are
then called RFC function modules. BAPIs are complete sets of
(BAPI) function modules that model a business application.
When you are familiar with web developments: RFC can be
compared to HTTP and BAPIs are CGI applications.
In other words: A BAPI function is a function module that
can be called remotely using the RFC technology.
RFC and BAPIs are remote enabled function modules. They are practicly the same. A BAPI is one step further as it usually is a self contained business function, such as "Create Purchase Order", or "Change Sales Document". BAPIs interface is very well defined and documented. BAPIs can be found in the BAPI browser via transaction BAPI. RFCs are just remote enabled function modules.
BAPI stands for Business Application Programming Interface. It is a library of functions that are released to the public as an interface into an existing SAP system from an external system.
RFC is the protocol used to call functions in an R/3 system by a caller external to R/3 or to call programs external to R/3 from an R/3 system. Functions can only be called via RFC, if they are tagged as RFC functions in the SAP development workbench.
BAPIs are RFCs, the only difference is that BAPIs usually encapulate some complete business object. For example, creating a sales order, the BAPI would do all of the steps required to create a sales order.
Regards,
Shiva. -
LSMW me51n, how to create one PR document for all the records in the file
HI all,
I need to create LSMW for t-code me51n -Create Purchase Requisition. I`m using Bapi BUS2105, method CREATEFROMDATA, idoc message type PREQCR, basic type PREQCR03. The problem is that the LSMW is creating different idoc and different PR document for every record in the source file. My requirement is to create one PR document for one source file (Every source file is different Purchase Requisition) . I`m trying to do this with writing some code(global functions ) in the 'Mapping and conversion rules' events - BEGINOF_TRANSACTION_, ENDOF_TRANSACTION__..., but i`m not very sure what exactly i`m doing .
Please help me resolve this problem, any help will be appreciated .
Best regards, Emil Milchev.Thank you for you answer.
But I have found faster way of doing it - two source structures, one HEADER and ONE ITEM.
HEADER: one empty text field and identificator for it.
ITEM: everything else.
Then everything was just fine, i`ve mapped the different IDOC segments by PREQ_ITEM fields (equal values in the source file : 10-10-10..., 20-20-20,.... etc.) and put all required fields for my LSMW
SOURCE FIELDS:
Z_ME51N_V2 - MASS_UPLOAD - CREATE create
Source Fields
UPFILE upload file
IDENT C(010) ident
Identifing Field Content: header
TEXT C(001)
UPFILE2 123
IDENT C(010) ident
Identifing Field Content: item
BSART C(004) Document type
BANFN C(010) Purchase requisition number
BNFPO_FOR_MAP N(005) Item number of purchase req. for MAPPING acc.
BNFPO N(005) Item number of purchase requisition
KNTTP C(001) Account assignment category
PSTYP C(001) Item category in purchasing document
MATNR C(018) Material Number
WERKS C(004) Plant
LGORT C(004) Storage Location
MENGE N(013) Purchase requisition quantity
EKGRP C(003) Purchasing group
KONNR C(010) Number of principal purchase agreement
KTPNR N(005) Item number of principal purchase agreement
LIFNR C(010) Desired Vendor
FLIEF C(010) Fixed Vendor
AFNAM C(012) Name of requisitioner/requester
PREIS AMT4(011) Price in purchase requisition
ABLAD C(025) Unloading Point
WEMPF C(012) Goods Recipient
PS_POSID C(024) Work Breakdown Structure Element (WBS Element)
KOSTL C(011) COST_CTR v bapito ?
NAME1 C(040) Name1 - Name of an address
NAME2 C(040) Name2 - Name of an address 2
STREET C(060) Street
DELIVERY_DATE C(008) Date on which the goods are to be delivered
TEXT C(132) item text
STRUCTURE RELATIONS :
Structure Relations
E1PREQCR Header segment <<<< UPFILE upload file
E1BPEBANC Transfer Structure: Create Requisition Item <<<< UPFILE2 123
E1BPEBKN Transfer Structure: Create/Display Requisition Acct Assgt <<<< UPFILE2 123
E1BPEBANTX BAPI Purchase Requisition: Item Text <<<< UPFILE2 123
E1BPESUHC Communication Structure: Limits <<<< UPFILE2 123
E1BPESUCC Communication Structure: Contract Limits <<<< UPFILE2 123
E1BPESLLC Communication Structure: Create Service Line <<<< UPFILE2 123
E1BPESKLC Create Comm. Structure: Acct Assgt Distr. for Service Line <<<< UPFILE2 123
E1BPESLLTX BAPI Services Long Text <<<< UPFILE upload file
E1BPMERQADDRDELIVERY PO Item: Address Structure BAPIADDR1 for Inbound Delivery <<<< UPFILE2 123
E1BPMERQADDRDELIVERY1 PO Item: Address Structure BAPIADDR1 for Inbound Delivery <<<< UPFILE2 123
E1BPPAREX Ref. Structure for BAPI Parameter EXTENSIONIN/EXTENSIONOUT <<<< UPFILE2 123
MAINTAIN FIELD MAPPING AND... :
the MAPPING between two IDOC`s segments:
In first segment:
E1BPEBANC Transfer Structure: Create Requisition Item
Fields
PREQ_NO Purchase requisition number
Source: UPFILE2-BANFN (Purchase requisition number)
Rule : Transfer (MOVE)
Code: E1BPEBANC-PREQ_NO = UPFILE2-BANFN.
PREQ_ITEM Item number of purchase requisition
Source: UPFILE2-BNFPO (Item number of purchase requisition)
Rule : Transfer (MOVE)
Code: E1BPEBANC-PREQ_ITEM = UPFILE2-BNFPO.
In second segment :
E1BPEBKN Transfer Structure: Create/Display Requisition Acct Assgt
Fields
PREQ_NO Purchase requisition number
PREQ_ITEM Item number of purchase requisition
Source: UPFILE2-BNFPO_FOR_MAP (Item number of purchase req. for MAPPING
Rule : Transfer (MOVE)
Code: E1BPEBKN-PREQ_ITEM = UPFILE2-BNFPO_FOR_MAP.
After that everything was OK . -
Change documents for created for Customer Master
An existing program makes changes to the Customer master table KNA1. The changes are made at the table level using the UPDATE command. Since the changes are being made at table level, the change documents are not created.
I need to create IDocs for all changes. So the question is, how to create change documents for changes to the particular fields being UPDATEd in the report program.
I understand that a BDC program on XD01 screen should have been the best way for this, but I'm here to break-fix and trying to identify solutions with least development effort.Hi ganadeep,
When an application makes any changes to an object it wrties change documents which are stored in the table CDHDR and CDPOS for each change made.
BDCP table holds the change pointers which point to the change documents in the CDHDR table.
Regards
Parag -
Error : Pre Settings for IDoc inbound processing are missing error
Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]
Maybe you are looking for
-
HT1751 How do I allow other users on my mac to access my music library?
Hi I have a macbook and my wife is also a user. I've followed instructions to try and move my iTunes media folder to a public location but basically can't find a public location that's accessible to drag a folder to. It only shows up on Bootcamp and
-
How-to install JRE/JDK on remote server without X11
Hi, I need to install a JRE on my remote server (e.g. Amazon EC2) from a location with slow / limited bandwidth. Ok, so I cobble a way to get a download of the bin by fudging that I am going to load it to my laptop, then copy and paste the final URL
-
Ok, so I have a form that I distribute to other users to use on a shared drive on the company network. The problem is that when they go to click the "save" icon, the "save as" box appears for them to save the file. The problem with this is that use
-
Archive Check Criteria for Balanket Purchase Order (PO with Limit Order)
Hi, My company is going to archive the blanket purchase order. I can use the guidelines SAP provided on what criteria is checked as describe in http://help.sap.com/saphelp_srm50/helpdata/en/89/a2fb3b699bde74e10000000a114084/frameset.htm I couldn't f
-
Create Letter after applicant has been created WS00400019
Hello, Firstly i would like to find out if it is possible for this subworkflow to be processed in the foreground, because when it is executed it gives me an error stating that "Error when defining successor for node 0000000004. I've checked the bindi