XI demo scenarios for SAP ECC 6.0

Hi!
I succesfully installed SAP ECC 6.0 (IDES with several clients) and would like to implement some simple XI demo scenarios in order to interchange the data from one client into another client via XI.
What is the best Getting Started scenario and where can I found the documentation therefore?
Thank you very much!
regards
Holger

Hi Holger,
According to me , the simple scenario to start with will be File to Proxy.
Search on SDN as to how to configure Sender file adapter ( use this link [Configuring the sender file Adapter|http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm] )
and then search how to configure Receiver XI Adapter to communicate with R3 system ( use this link [Configuring Receiver XI Adapter|http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm] )
Best Regards,
Sushil.

Similar Messages

List of Components for SAP ECC 6. 0 EHP4 NW 7.01

Hi Experts,
How to find the list of components for SAP ECC 6. 0 EHP 4 NW 7.01.
Regards,
IFF

Hi,
Two ways I could think of:
- Best would be goto http://service.sap.com/pam -> search for ERP 2005 EhP5 and check in the "Included components for <technical usage>" section. For this you would need to know the scenario for which you need ERP 2005 EhP4
- If a solution manager is available, goto tcode SMSY -> Product Definitions -> SAP ERP ENHANCE PACKAGE and select EhP4.
Regards,
Srikishan

Disaster Recovery For SAP ECC 6.0 On Oracle

Hi All,
This is our infrastructure
Windows 2003 Server
SAP ECC 6.0
Oracle 10
Legato Networker Client / Library
Actually our Backup Strategy is to do an Online Backup Every Night from monday to saturday. We want to test our backup by doing a Restore. We are assuming a complete loss of the system including hardware.
What we do:
1. Install the SAP System on a new host with the same hardware characteristic of the source system.
2. Install & Configure the legato utility.
3. Copy the E:\oracle\MIS\sapbackup\ directory from the source system to the test system.
4. Them we put the database in mount mode.
5. Execute the command: brrestore -b bdyxwoqv.fnf -m full (bdyxwoqv.fnf-> Full Online Backup that was executed without problems).
It gives the following errors:
BR0386E File 'F:\ORACLE\MIS\SAPDATA2\SR3_10\SR3.DATA10' reported as not found by
backup utility
BR0386E File 'F:\ORACLE\MIS\SAPDATA3\SR3700_9\SR3700.DATA9' reported as not foun
d by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0279E Return code from 'backint -u MIS -f restore -i E:\oracle\MIS\sapbackup\.
rdyybrzp.lst -t file -p E:\oracle\MIS\102\database\initMIS.utl': 2
BR0374E 0 of 63 files restored by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0231E Backup utility call failed
BR0406I End of file restore: rdyybrzp.rsb 2008-10-01 17.45.19
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0404I BRRESTORE terminated with errors
Since this is a new SAP system it never will find the SAPDATA files because they where on the source system and this is a new test system.
We found the following note:
96848 Disaster recovery for SAP R/3 on Oracle
But this note is for SAP R/3 no for SAP ECC!
It explain that you have to install your SAP system with the System Copy Method (is this the only way??).
2.) Installation of the R/3 System
The installation of SAP software contains the software installation of the database. The initial SAP database should be created again but the SAP data should not be loaded.
Install the SAP system with the Oracle-specific system copy method, which is based on backup/restore. This method is described in the system copy guide for your Product/Release. Refer to Note 659509 for products that are based on Web AS.
3.) Modification of the installation
Above all, you must take into account the mounted file systems at the time of the loss. If necessary create new SAPDATA directories (mount points). These generally identify a disk or a logical storage area (logical volume).
Are we working in the right way? maybe there is a formal procedure to do a Restore from an Online backup when you complete loss your system.
Please some tips.
Best Regards,
Erick Ilarraza

Hi Eric,
Thanks a lot for your reply, I will follow the Note 96848 Disaster recovery for SAP R/3 on ORACLE point 5.
5.) Restore profile and log files, as you sayed in case of disaster we will lost our "source" system.
On the other hand to configure the legato client we take care of the name of the server, we configured the .sap, .cfg and .utl files so in theory the restore will be done on the new test system since we run the brrestore command from that system.
Officially there is not a documentation from SAP to do a Restore from a Online Backup with SAP ECC, SAP Netweaver (ABAP / ABAP + Java). You only have the 96848 note??? I found the following information:
http://help.sap.com/saphelp_nw70/helpdata/en/65/cade3bd0c8545ee10000000a114084/frameset.htm
But there is not a official procedure like a System Copy Guide or Installation Guide.
Best Regards,
Erick Ilarraza

Sql Server configuration requirements for SAP ECC 6.0

Dear All,
I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0 with Oracle 10.2G which is the most common combination.I am having docs for this combination.
I am installing ecc for the first time.
*I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
Thanks for your efforts.

"Excuse me?
What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
You can use the software available here in the SDN to lean and study, that's why it's there.
If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
Do u understand what is legal or illegal? Have u read the license in full?
The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
Therefore there is nothing illegal about it.
It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
Since it being used for training purpose the above does not hold good.
In fact it is SAP who is benefited in the long run bec' after a person learns it technology because he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
Edited by: coolmind26 on Jun 5, 2011 10:57 AM

File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2

Hello,
We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
If anyone able to help me with required Solaris file system. it will be great help.
Please let me know if there is any query.
Thanks.

> All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
> But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
> Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
So you'd need to read the installation guides
Markus

SX_OBJECT_CONVERT_OTF_PDF for SAP ECC 6.0

Hi all,
     The function SX_OBJECT_CONVERT_OTF_PDF is different for SAP ECC 6.0.
     The parameters are as below:
      IMPORTING
*"     VALUE(FORMAT_SRC) TYPE SX_FORMAT
*"     VALUE(FORMAT_DST) TYPE SX_FORMAT
*"     VALUE(ADDR_TYPE) TYPE SX_ADDR_TYPE OPTIONAL
*"     VALUE(DEVTYPE) TYPE SX_DEVTYPE OPTIONAL
*"     VALUE(FUNCPARA) TYPE SX_FUNCPAR OPTIONAL
*" CHANGING
*"     VALUE(TRANSFER_BIN) TYPE SX_BOOLEAN
*"     VALUE(CONTENT_TXT) TYPE SOLI_TAB
*"     VALUE(CONTENT_BIN) TYPE SOLIX_TAB
*"     VALUE(OBJHEAD) TYPE SOLI_TAB
*"     VALUE(LEN) TYPE SO_OBJ_LEN
*" EXCEPTIONS
*"      ERR_CONV_FAILED
Anybody know how to used this function?
Thanks
Regards,
Kwchan

Hi Chan,
Check the following piece of code:
    data transfer_bin type sx_boolean.
    data:li_pdf_data type w3mimetabtype.
    data objhead type soli_tab.
    call function 'SX_OBJECT_CONVERT_OTF_PDF'
      exporting
        format_src      = 'OTF'
        format_dst      = 'PDF'
        devtype         = 'ASCIIPRI'
      changing
        transfer_bin    = transfer_bin
        content_txt     = li_otf_data
        content_bin     = li_pdf_data
        objhead         = objhead
        len             = l_size
      exceptions
        err_conv_failed = 1
        others          = 2.
Regards,
Ravi

Linux version for SAP ECC 6.0

Dear all,
Please help me in finding the suitable Linux version for SAP ECC 6.0 version.
Thanks & Regards
Tavargeri Ganesh

SAP on Linux
--> Supported platforms
Markus

Disaster Recovery server for SAP and HACMP Cluster script for SAP ECC 6.0

Hi,
I need document for Disaster Recovery server for SAP? I have to configure the DR Server If you have, please share this document if possible.
Have you any cluster script ( HACMP Cluster script for SAP ECC 6.0 ) ?
Thanks & Regards,

Hello, I'm doing a "Plant ECC6 to do a test disatre / Recovery.
During the installation, I would use the same <sidadm> existing as it is in the PRD.
If I tell you to install it during the same <sidadm> it will overwrite what already exists, or do I just enter the password of existing <sidadm>?

License Key Request from SOLMAN VS SMP for SAP ECC 6.0 EPH4 IDES install

Hi, SDN fellows.
I have some doubt on the right way/options to request License Key for SAP ECC 6.0 EPH4 IDES.
Previously, I read that the only way to get license key is to generate it through SAP Solution Manager. If this is the only way, we will have to install Solution Manager just to generate the license key (we are currently don't have SolMan running in our landscape).
I also read that I can request license key through http://service.sap.com/licensekey. I checked the link and see that we have the 10 digits installation number for Product: SAP ERP.. Currently there is no system defined for this installation number.
I went through the first two screens, seems like they have options for SAP ERP 6 --> IDES.
If I can get a license key from http://service.sap.com/licensekey, do I still need to install Sol. Man. to generate the license key?
What are the difference the license key generated from Sol. Man. VS the one we request from SMP?
Thanks,
KC

Hi, Vishnu.
So, now I understand I need two keys: Solution Key and also License key.
I should obtain Solman key before I start installation , as the SAPinst will ask to enter Solman key before it can proceed to install SAP ECC IDES.
You said I can obtain Solman key through OSS note. I went in to SMP just now. Navigated to Help& Support --> Report a Product Error --> New Problem Solving Request.
I selected Customer Number, Product, Instillation # , and enter * for System ID. The search result returned no system found. The problem here is we don't really have any system ID defined for SAP ERP IDES since we haven't start installing the system.
Is that true that I will only see the System ID in OSS Message interface when I submit the System ID for the license key?
I thought this is a post-installation step to apply for a license key. If I can to do it before the installation, how can I get the 11 character hardware key before installation (assuming I cannot run the SLICENSE TCode and saplikey u2013get command)?
OR how can I create OSS message to request SolMan key when I don't have a system ID (that already registered for license key) in SMP?
OR I should just go ahead to install Solution Manager to generate Solman key (during pre-installation), and request for license key in SMP in post-installation?
Thanks for advise,
KC

IDES Bus Scenarios for SAP IS-OIL solutions

Will anyone provide url for Business scenarios for SAP IS-OIL SD and MM modules

Here is the link go through it,
http://help.sap.com/bp_bblibrary/600/HTML/X14_EN_AU.htm
Regards,
Rao

Demo Reports for SAP Graphics - T Code "GRAL"

Hi Friends
Greetings for the day...
We are in the process of developing SSO for our customer. Wherein, SAP R/3 being used as backend and EP as front end.
having limitations to develop Pictorial views, trend analysis etc for report generation, we thought of using - <b>Demo Reports for SAP Graphics - T code GRAL.</b>
infact, we have started exploring the possibility to use them, however, I need an expert comment from seniors who has already implemented those graphics.
In this regard, what I request
<b>1. How far useful to utilise them?
2. Avaialability of BAPIs to develop incase not following the demo graphics?</b>
If any clarifications are required, I welcome to answer ur queries.
Thanks in Advance
Sudhakar
Hi Friends,
does any one used the demo graphics? hands on experience?
Message was edited by: Sudhakar Pappu Rao

Hi Kai gutenkunst
Thanks a lot for your information. would be highly obliged if you can clarify the following
1. Will this XML charts accepts inputs from RFC?
2. Can we call this charts in Webdynpro?
Please note that these charts are meant for tracking progress ie Planned Vs Actual data of Projects. all the input values are dynamic.
Thanks in advance
Regards
Sudhakar

What oracle edition required for sap ecc and ep in one box

hi friends
what oracle edition required for sap ecc installation which supports the HA and disaster recovery plan
10g
1. Oracle Database Standard Edition One 10 g
2. Oracle Database Standard Edition 10g
3.Oracle Database Enterprise Edition 10g
3. Oracle Database Express Edition 10g
4. Oracle Database Personal Edition 10g
thanks in advance friends
regards
raja

hi,
I believe that SAP only support enterprises edition one because you'll get all database features.
ardhian
http://sapbasis.wordpress.com

Design Approach for 1:N Multimapping scenario with SAP ECC Receiver

Hi Experts,
I am trying to find the best approach to implement the following scenario. its desribed as follows:
Legacy Database ->XI -> SAP scenario.
1. Pick records from database table with status ='n'
2. The records picked can have one or more RefNos i.e. if 2000 records are picked 1500 can have RefNo :1111 and rest 500 RefNo: 2222
3. 1st condition is to split the records into multiple messages if reference nos are different, so for scenario in point 2 it will be 2 messages. Secondly if the no of records are more than 1000 then split further into 2 message. So 1500 Ref No would be split into messages with 1000 and 500 records. Hence we get 3 messages. I know something similar was achieved in this blog:
</people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
4. Once the data is forwarded to ECC and its successfully updated, we need to update the status of the database table on the sender side to 'y';
So the point where i am not very clear as of now is,
1. What alternative I choose for PI-> ECC call? Its a 1:N multimapping split scenario and as far as I know the call has to go via AE, so is RFC the only option or is there a way to have a call with Proxy/IDOC? Or will there be an option to limit such a scenario at the JDBC Adapter level so that split is not needed. I am not sure if that can be achieved and is a better solution.
2. If I go for either of the approaches mentioned above, what is the best way to achieve point 4, i.e. update the database table at the sender. As JDBC Adapter would be async and hence we either use a Aysnc-Sync bridge(for proxy/rfc receiver) or some other option like triggering a outbound interface from SAP side with the update data?
Hope that experts can provide the inputs on the best way forward.Let me know if anything is missing from scenario details perspective.
Best Regards,
Pratik

Pratik,
2. If I go for either of the approaches mentioned above, what is the best way to achieve point 4, i.e. update the database table at the sender. As JDBC Adapter would be async and hence we either use a Aysnc-Sync bridge(for proxy/rfc receiver) or some other option like triggering a outbound interface from SAP side with the update data?
Use the solution # 2, make it like this:-
DB (async) -> PI -> Proxy (sync) -> PI -> DB (async)
Just out of curiosity, why you breaking the records into 1000's in PI? Why not you select only 1000 records when polling the DB? That will help in improving the overall performance.
Regards,
Neetesh

Typical business scenarios for SAP ME demos

Hi,
Can somebody comment on some typical business scenarios / applications for building demos in a SAP ME sandbox environment?
Regards,
Chanti.

Chanti,
A while ago there was some document on SMP next to ME Installation and other guides. It is called "SAP ME 5.2 Business Scenario Description". However, for some reason I can't find it there anymore. You migth ask Consulting service about it.
Regards,
Sergiy

How do we map this scenario in SAP ECC

Hi Gurus,
I need a help from you, to get your perspective on how the below mentioned business scenario can be mapped in SAP ECC.
Scenario: The client is engaged in a business of supplying surgical kits to hospitals. The surgical kit is actually a case with two shelve in it. Tray 1 holds the equipments for surgery and the Tray 2 holds the implants for surgery. There are various different kits depending upon different surgeries. Depending upon the need/demand from the hospital appropriate kit is sent to the sales rep, who then delivers the kit to hospital. Now when the kit is supplied to the hospital, the surgeon uses the equipments from Tray 1 to perform the surgery and consumes some of the implants (as needed) from Tray 2. Once the surgery is done, the equipments are cleaned by the hospital and the kit is sent back to the sales rep.
At this point the sales rep need to raise an invoice to the hospital for the implants that were consumed from the Tray 2 and also need to charge for the service for using the equipments. Both the equipments and implants have serial numbers and each kit has a serial number.
Ask from the business
1.They should be able to track which kits are out in the field and should be able to see the inventory within the kit.
2.Should be able to consume the implants from inventory, which have been consumed during surgery and raise an invoice to the hospital for consumed implants.
3.Business should be able to charge for the equipments used
4.They should be able to track the inventory in the kits
5.They should be able to depreciate the equipments in the kits.

Hi,
You may please check in this forum
Also, please explore whether [IS-Healthcare|http://help.sap.com/content/documentation/industry/docu_is_health.htm] helps you finding a solution.
Regards,
P Gomatheeswaran

XI demo scenarios for SAP ECC 6.0

Similar Messages

Maybe you are looking for