XI Error ATTRIBUTE_IDOC_RUNTIME.IDOC_ADAPTER: Queue in SMQ2

Hi XIer's,
I have an issue while i am doing an IDOC-to-IDOC Scenario
The queues have been stucked in the SMQ2 and when i checked the queue it is showing sys-fail and with this Error : "XI Error ATTRIBUTE_IDOC_RUNTIME.IDOC_ADAPTER: Queue ".
when i tried to process the queue by executing LUW it is not processing.
Therefore i request you let me know the reason for this error why it occurred and please let us know how to resolve it.
Appreciate your quick reply and points will be awarded accordingly.
Thanks & Regards,
Ram

Similar Messages

Error in Inbound Queue (Tx. SMQ2) / Error "CMW_PIF_PROTOCOL"

Hello everybody,
I have got a queue which appears time by time. It is called "ISP_I_000000000000017" in my Inbound Queue.
Below further information about that.
Information from Tx. "SE16" about this Error.
Client             010
Site-Typ-ID          GWA_01
ISP Queue-Typ        I
Log. Queuename       CMW_PIF_PROTOCOL
Queue-Name           ISP_I_000000000000017
Destination          ISP_I_000000000000017
Description        GWA_01/I/CMW_PIF_PROTOCOL
Has anyone an idea what's behind this? What is the pif-Protocol? How can I avoid this error in the inbound queue.
Every idea is appreciated.
Thanks in advance.
Kind regards Harry

One option would be to raise an exception for such steps....in the Exception handler you can repeat the same step....in your case it will be the mapping (n:1) .....are you sure that the process failed in Transformation step and that the data was correct....i mean all the 5 IDOCs were sent as an input to the mapping?
Can you ensure that during this time there was no connection issue between the BPM and the mapping runtime (IE)....may be you can check with your BASIS.
Regards,
Abhishek.

Error"XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue sto" in SMQ2

Hi,
When i am trying to test my JDBC to ABAP Server proxy i am getting the error(XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue sto) in SMQ2 please advice me what could be the problem?
Regards,
Bhoj

Hello better you apply LUW on each and every message in SMQ, queues. Else activate and inactivate the messages in the queue by sxmb_adm -> managequeues -> deregisterqueues -> registerqueues -> activate queue.
And also do if any messages are failed follow the blog to resend the failed messages,
XI : How to Re-Process failed XI Messages Automatically

Error while activating Queue XBTR* in Manage Queues in TCODE sxmb_adm

Hello Experts,
SAP PI is sending the data to ECC through inbound proxy in PI SXMB_MONI it is showing Black colur flag as it is through but in R3 SXMB_MONI messages are in green colur flag showing it is in scheduled state.Data is in quues in SMQ2.
While i try to activate queues in SXMB_ADM it throwing as Error while activating Queue XBTR*
XBTR Queue is in SMQ2.
Regards
Naresh

Hello Naresh,
Check if the queue XBTR* is already registered in your SAP R3 server.
You have to do it first, if not already done.
Regards,
Subhajit

Error while activating queue XBTI*

Hi All,
When I triggered the message i have seen the message in Green Color in MONI.
there by i went to SMQ2 and have seen the message that is strucked in the queue XBTI0001.
After that i have deleted the queues from SMQ2 and De-registered the queues and Registered the queues again. in SXMB_ADM
There by i Activated the Queues in the same screen.
then i got the Error as Error while activating queue XBTI
What could be the problem with this activation
REgards

Hi Prateek,
That activation and all is working now,
but the problem is iam trying to restart the successfully processed messages in MONI through
this Blog
Michal Krawczyk's Blog
The specified item was not found.
Every thing has been followed as explained in the Blog.
I took the message ID of the Successfuly processed message from MONI and when i execute the report.
Each and every time The message is comming to MONI with GREEN Status .
Then if i goto SMQ2 , ther i can see the queu with the description saying that SYSFail
and if i manually trying to release the Queue means it is saying Running and immediately turning into the same SYSFail state
The queue is not at all getting Free.
This is the problem
Regards

XI Error JCO_SYSTEM_FAILURE.MAPPING: Queue stopped

In SMQ2, i can see a queue stuck giving error:
XI Error JCO_SYSTEM_FAILURE.MAPPING: Queue stopped
when i click it...it leads me to a SXMB_MONI entry..
which corresponds to a IDOC to File scenario, where a message mapping fails giving the following error,
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>java.lang.OutOfMemoryError</SAP:P1>
<SAP:Stack>"SYSTEM FAILURE" during JCo call. java.lang.OutOfMemoryError</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
If i try to reEXECUTE the LUW from SMQ2, it again shows the error.......
how can i solve the problem without delecting the queue

hi ,
This error is coming because your message is very large or lots of large xsd files are uploaded in XI
you need to increase the memory used by JVM for your XI. How to increase the Memory ? for answer go to this blog.
/people/keerti.nayak/blog/2007/03/05/solving-145out-of-memory146-problem-150-using-jnlp
hope it will sovle the problem...

Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"

Hi,
In SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
Thanks,
Praveen

Hello Mr,
Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
To be more helpful, can you post here complete error log?

XI Error ERROR_OBJECT.INTERNAL: Queue stopped

Hi All,
In our Integration system there are lot of ques stopped in SMQ2. When we checked the status is SYSFAIL and we are getting message as "XI Error ERROR_OBJECT.INTERNAL: Queue stopped"
Not sure how to solve this problem and what are the things that i should check.
"XI Error ERROR_OBJECT.INTERNAL: Queue stopped
Message no. SR053
In SM37 i can check that the job named "80144F3A76E71DDFAF9B420D2A9B8456" is created by user PISUPER and running and active since 86000 secs.
Can anyone help in this
Thanks

hi,
need to restart Queue..
->double click on Quue
->it will show you status of the Q....number of messages in the Q...
-> double-click on the number of entries
-> you will see a detailed report
-> double click on the first entry
-> you will see the message processing due to which the Q got blocked
-> on the toolbar above (in the same page) you will find the option of Restart...click it....select the tracing level as retain....
this will cause the message processing to restart and all the messages blocked in the Q will get processed....
please refer below blog:
Internal Server Error in PI 7.1
thanks,

Queue Block (SMQ2) and no GATP invoking for Sales Order

Hi,
I am encountering two issues:
- Every time I activate any integration model for customer, materials etc. it queues up in SMQ2 in ECC and on processing there it goes to the APO
- When I create sales order it does not invoke the GATP screen. However, if I click onto the 'Item availability' button it takes me to the APO screen with a different check mode (different from the one maintained in product master)
- On saving the sales order and then clicking 'Item availability' button again, I get the message 'Order do not exist'. Next, if I check SMQ1 in ECC I find the queue. If I try to re-process, I get the message "LUWs in status NOSEND must be picked up by the application.
Well, we have maintained X0 for the MRP materials, did CIF manually, and have udated the product master ATP view with new check mode. We have also maintained the distribution, RFC destination, change transfer settings etc.
Can someone please tell me as to what is it that controls the queue communication between ECC & APO or if anything else that is controlling this.
Regards,
Avijit

Hi Santosh,
We maintained this settings in /SAPAPO/C4 in APO.
Also, we maintained Debug = 'R', Logging = 'D' (Detailed) and RFC Mode = 'Q' (Queued RFC) in CFC2 of ECC.
Even on changing the Debugging off in APO system to "Debugging on" / "Debugging on, Recording of t/qRFCs (NOSENDS)". I get the queue in SMQ2 of APO with status 'NOEXEC' i.e. no automatic execution.
Another info:
The queues are CF* and for that we maintained like this:
In ECC (T-code: SMQS): Host id of ECC system is appearing at the 'Schedular Information' section and against the Destination of SCM system we maintained Host id of ECC system once again
In ECC (T-code: SMQR): Host id of ECC system is appearing at the 'Schedular Information' section and against CF* queue Destination with Logon data is blank
In SCM (T-code: SMQS): Host id of SCM system is appearing at the 'Schedular Information' section and against the Destination of ECC system Host id is kept blank
In SCM (T-code: SMQR): Host id of SCM system is appearing at the 'Schedular Information' section and against CF* queue Destination with Logon data is blank
In the light of these, is there something , that I am missing. Please let me know.
Regards,
Avijit

Error: ATTRIBUTE_IDOC_RUNTIME FM NLS_GET_LANGU_CP_TAB: Could not determine

Hi All
Production issue
Scenario is: File to IDOC
From 2 days our R3 production server was down. Before R3 went down i didn't stop my Sender File Communication Channels and XI was continuously accepting files to process it and then trying to post it into R3. Now I can see around 500 messages are failed into SXMB_MONI with error "ATTRIBUTE_IDOC_RUNTIME
FM NLS_GET_LANGU_CP_TAB: Could not determine code page with REP_00_301 Operation successfully executed FM NLS_GET_LANGU_CP_TAB".
Now R3 is working fine and IDOCs are successfully getting posted.
Before telling my issue i want to share one information that in Message Mapping i have implemented a concept of duplicate file handling due to this duplicate file cannot be processed again.
Now my issue is: I am trying to restart the failed messages. So, whenever i am trying to do so my request mesasge maaping is called again and it is showing a error of "Duplicate file". So how can i reprocess my failed messages????
Regards
Dheeraj Kumar
Edited by: Dheeraj Kumar on Jul 14, 2010 3:55 PM

Hi Prasanna
I am maintaining the file names in the table and that table is maintained in XI. Through UDF i am sending a query to check whether that file name exist or not if exist then it is duplicate file otherwise it will process normally.
In production environment I cant delete the entry of file name as it is disabled.
Regards
Dheeraj Kumar

XI Error : EXCEPTION_DURING_EXECUTE.Mapping Queue stopped

Hi All,
We are facing an issue when the mapping fails due to a use one as many function it fails the queue and Queue goes into state SYSFAIL. We see the error as XI Error : EXCEPTION_DURING_EXECUTE.Mapping Queue stopped
Is this expected ? Isnt the queue expected to work normally by just failing the message which would then appear in sxmb_moni?
Any help , pointers?
Regards,
Sathya

Hi Jyothi,
Sorry for not being clear.. I know what is causing the mapping error. its incorrect number of values in use one as many function as i Mentioned earlier.
I want to know is there a way to stop the queue from failing. Queue failure causes other messages which are coming from other interfaces to get blocked.
Ideally the messages in error should show up in sxmb_moni and queues should be processing normally. However in this case it does not happend.
Regards,
Sathya

CCMS monitoring for Queues(SMQ1/SMQ2)

Hi,
How do we monitor Queues(SMQ1/SMQ2) in CCMS. My requirement is to monitor Queues(SMQ1/SMQ2) in CCMS based on the Queue name. I want to create different nodes in CCMS and I want queue name falling under certain criteria should come and sit in the respective node of CCMS.
Means queue with name High_priority should come n sit under node say Test1, queue name with medium_priority should come n sit under node say Test2 and queue name with medium_priority should come n sit under node say Test3.
Is it possible to do so.

Hello,
also for queue monitoring the easier and more flexible way to monitor is via Business Process Monitoring. The configuration is easier than CCMS where you have to use transaction RZ21 and need to transport objects. And the qRFC monitoring is more flexible than in the CCMS. Basically all customers knowing both standard CCMS qRFC monitoring and qRFC monitoring in BPMon chose the later or exchange their existing CCMS monitoring by BPMon.
See also the SDN blog /people/johannes.fleig/blog/2008/06/11/new-business-process-monitoring-functionalities-in-sap-solution-manager-150-qrfc-monitoring
and check out the Interface Monitoring Setup Guide under http://service.sap.com/bpm > Media Library > Technical Information.
Best Regards
Volker
Edited by: Volker von Gloeden on Jul 2, 2010 4:48 PM

Domino Provision error: No message queue with that name

Hi,
Recently when we try the domino provisioning we often receive this error:
No message queue with that name.
This error is intermittent.
Does any one has any idea why?
Thanks

Hi Wushilin,
We are also encountering the same problem.
Are you still facing the same issue?
If you have solved the problem, can you share the solution?
Thanks!

Sysfail errors in the queues

Dear experts,
I established middleware settings between CRM 2007 and ECC i getting errors in the queues.
with displaying status sysfail in both the queues .
http://s657.photobucket.com/albums/uu298/vallabhaneni/?action=view&current=smq1errors.jpg
http://s657.photobucket.com/albums/uu298/vallabhaneni/?action=view&current=smq2errors.jpg
Regards
V.Srinivas

Hi,
SMOF_ERPSH is the table where you will have to maintain your R/3 system details. Any download of data from r/3 will refer to this table to get the R/3 details and check whether the R/3 is correct or not. Please maintain a proper entry in this table.
Now how do make an entry in SMOF_ERPSH is as soon as you create a site in smoeac under R/3 you will get an entry in this table.
Thanks & Regards
Abishek

Error in Outbound Queue while Releasing order from CRM to ECC

Hi,
When I release my sales order from CRM to ECC, I got an error in Outbound Queue saying "Screen output without Connection to User".
This is occuring in FM : BAPI_SALESDOCU_PROXY_UPLOAD
Can you please tell me why this error is coming?
Thanks,
Sandeep

Hello Sandeep,
During the RFC call from CRM to ECC, this is a background processing, the screen call is not allowed.
If a call screen is executed, there is the mentioned error.
Please check in your ECC system, whether you have any user exits that have the coding 'call screen'.
Best regards,
Maggie

XI Error ATTRIBUTE_IDOC_RUNTIME.IDOC_ADAPTER: Queue in SMQ2

Similar Messages

Maybe you are looking for