XI Error code...clarification

<p>URL http://Hostname/XISOAPAdapter/MessageServlet call was terminated because the corresponding service is not available.
The termination occurred in system Hostname with error code and for the reason Not found The selected virtual host was 0 .
This was the error message returned when i sent a soap message to the XI server on our system.....Any SPECIFIC clarifications would be helpful
Venkat

Srihari,
I did do that..the format is
http://host:port/XISOAPAdapter/MessageServlet?channel=:BusinessSystem:CommunicationChannel
That seems to be fine........Now what is the question
Venkat

Similar Messages

Error Code 21 with iPod Touch

Hello, I recently registered my iPod Touch's UDID, and of course tried out iOS 7. But wanting to go back to iOS 6 for stability I restored to the ipsw, but when I did it went into a recovery loop, so since iTunes didn't seem to be able to fix it I used redsn0w to get out of the loop. But now with iOS 7 beta 6, which is supposed to be more stable, I figured I'd give it another chance and upgrade again. But, whether I try to restore into iOS 7 or do an upgrade, it gives me and error code 21 and goes into that recovery loop. Just for clarification I have an iPod Touch 5th generation, windows 7 ultimate, avast antivirus (error code 21 supposedly is related to anitvirus), and the most recent iTunes as of right now. Any help or ideas is appreciated, thanks!

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Can anyone provide Error code list and causes for OBIEE10g/11g ?

Hi
Can anyone provide Error code list and causes for OBIEE10g/11g ?
Regards
Srini
Edited by: Srini on Feb 18, 2012 10:41 AM

Hi,
List of Bug Fixes Included In OBIEE 11.1.1.5.0
Admin Tool
•7538753 SAP BW IMPORT DOES NOT RETRIEVE UNIQUE NAME FOR MEASURE COLUMNS
•10012297 ADMIN TOOL CRASH ON VERY LARGE EXPRESSIONS – OVERFLOW AT APPROX 3200 CHARACTERS
•10032385 TABLE MISSING IN SQL “FROM” CLAUSE – FWD PORT 8308443 TO 11G
•10045212 EQUALITY EXPRESSION IN LTS “WHERE” CAUSES INTERNAL SQORRQLIST ERROR ON QUERY
•10264475 ADMINISTRATION’S “SHUTDOWN SERVER” MENU SHOULD BE REMOVED
•10265121 ADMIN TOOL EXPRESSION BUILDER CRASHES ON DOUBLE-BYTE LOGICAL COLUMN NAME
•10394725 ON-LINE MODE CHECK-IN OF DYNAMIC INIT BLOCK CAUSES [43058] REFRESH LOCK FAILURE
Answers
•6521146 ERROR: “NO FILTER” WHEN USING “COMBINE WITH SIMILAR REQUEST” – UNION
•7534635 INACTIVATING DRILLDOWN ON COLUMN VALUE ALSO INACTIVATES COLUMN HEADER LINK
•9026854 CLARIFICATION REGARDING DATA FORMAT WHEN COMBINING REQUESTS
•9107277 KEEP THE NUMBER PRECISION IN DATABASE WHEN “DOWNLOADING TO EXCEL”
•9524080 PIVOT TOTAL DIFFERENT TO TABLE TOTAL WHEN REPORTAGGREGATEENABLED TRUE
•9697529 JAPANESE CHARACTER SET NOT PASSED CORRECTLY TO DRILL REPORT IN FIREFOX BROWSER
•9871470 SORTING ON A NULL VALUED COLUMNS GIVES ASSERTION ERRORS
•9886904 CORRECT DOC FOR ADDING CUSTOM DATE FORMAT STRING
•9918283 CORRECT DASHBOARD FORMATTING PROBLEMS WITH SCROLLING
•9928318 ROW HEADER MISSING AT PIVOT TABLE VIEW FOR MIGRATED REPORTS IN 11G
•9968574 SOME UPGRADED 10G CHARTS SHOW UP JAVA EXCEPTION
•10023165 MAPS DO NOT WORK IN MAP VIEWS WHEN JOIN COLUMN CONTAINS A “&” CHARACTER
•10065166 GAUGE RANGE IS NOT UPDATED WHEN IT CHANGES THE FIELD VALUE
•10078041 ACTION LINK DOES NOT WORK WHEN COMPOUND LAYOUT ONLY HAS A MAP VIEW
•10091354 “SCALE MARKERS” OPTION IS MISSING IN VERTICAL AXIS 2
•10147762 CANNOT SET GAUGE FOOTER (TITLE), KEEPS SHOWING “UNDEFINEDUNDEFINEDUNDEFINED”
•10182955 BUBBLE CHART IS NOT BEHAVING AS EXPECTED
•10213761 CONDITIONAL DASHBOARD SECTIONS (GUIDED NAVIGATION) ALWAYS RUNS REPORTS
•10229397 CANNOT SAVE REQUEST USING STANDARD DATE FORMATS.
•10282140 CELL IMAGE AT BLANK CELL OF PIVOT TABLE IS NOT DISPLAYED WHEN USING COND FORMAT
•10296730 UNABLE TO USE PRESENTATION VARIABLE IN SCALE MARKERS
•10312496 CHARTS. MEASURE LABEL IN GRAPH PROMPTS DOES NOT CHANGE CONTENT OF THE CHART
•10312795 ACTION LINK ON COLUMN HEADING NAVIGATION DOES NOT CONSIDER PROMPT VALUES
•10329343 CLICKING A LINE GRAPH BETWEEN TWO DATA POINTS DRILLS TO LAST VALUE IN HORIZONTAL
•10337649 PIVOT TABLE SHOWS BUTTONS FOR SORTING ON CALCULATED ITEMS.
•10402102 INCORRECT RESULT WHEN USING [NEW CALCULATED ITEM] PROP IN PIVOT TABLE
•10414887 DRILL DOWNS NOT WORKING IN CHART PIVOTED TABLE SELECTED FROM VIEW SELECTOR
•10418875 CHART SIZE IS CHANGING AFTER WEBCAT UPGRADE FROM 10G
•10634175 GRAPH ENGINE IS NOT RESPONDING
•10639913 COMPLETE TEXT IS NOT SAVED IN DB IF CURSOR IS MOVED AWAY DURING INSERT
•11711658 FILTER NEEDS TO SUPPORT UNTYPE LITERAL FOR RANK OPERATOR AS 10G DOES
•11805468 CUSTOMIZED GAUGE VIEW IS NOT CONSISTENT WHEN EXPORTED AS PDF,HTML AND XLS
•11817696 INCORRECT FILTER IS BUILT IF FILTER IS CONTRUCTED BEFORE SELECTING REQ. COLUMNS
•11845286 PIVOT TABLE WITH PERCENTAGES, GRAPHED PERCENTAGE VALUES DISPLAYED ARE INCORRECT
•11894921 GRAPH LABEL OPTIONS NOT AVAILABLE IN 11G
•11895279 INCORRECT FILTER VALUE WHEN USING ACTION LINK WITH GRAPH
•12412666 ALL PAGES LOSES CONDITIONAL FORMATTING
•12561361 PSE FOR BASE BUG 10295403 ON TOP OF 11.1.1.5.0 FOR GENERIC OS
CHARTING
•8990756 MISLEADING INFORMATION IN DOC REGARDING PIVOT TABLE SETTINGS
DASHBOARDS
•7459700 ABILITY TO SPECIFY FIXED COLUMN WIDTH TO A DASHBOARD PROMPT
•10177865 OBIEE 11G : DEFAULT VALUES CANNOT BE DE-SELECTED FROM MULTI SELECT PROMPT
•10279722 DASHBOARD SLIDER PROMPT SHOWS THUMB VALUES WITH TWO DECIMAL PLACES FOR INTEGERS
•10279829 DASHBOARD SLIDER PROMPT SHOWS WRONG VALUES FOR “ALL COLUMN VALUES” OR “SPECIFIC
•10310511 “REQUIRE USER INPUT” MESSAGE APPEARS THE FIRST TIME ONLY FOR THE REQUIRED PROMPT
•10389799 DASHBOARD NAVIGATION MAY CAUSE GETELEMENTBYTAGNAME ERROR IN IE
•10411545 PROMPT WITH BETWEEN OPERATOR AND SQL DEFAULT VALUES ARE NOT UPGRADED PROPERLY
•11056057 ERROR WHILE UPGRADING THE DASHBOARD WITH CERTAIN FILTER FUNCTIONS
•11076452 ABILITY TO CONSTRAIN PROMPTS AGAINST A SLIDER PROMPT
•11717024 ERROR 500 OCCURS WHEN SETTING ACCESSIBILITY MODE TO ON
•12620143 PSE FOR BASE BUG 12561330 ON TOP OF 11.1.1.5.0 FOR LINUX X86 [46] (PSE #602152)
INSTALL
•9459177 PREREQUISITES FOR DEPLOYMENT ON SEPARATE MACHINES
•9540009 UNIXCHK.SH ENCOUNTERS HOST NOT FOUND ERROR WHEN DNS IS NOT AVAILABLE.
•10071302 ENTERPRISE INSTALL: CONFIGURE PORTS : FORMAT OF INI FILE
•10126542 OBIEE 11G INSTALATION FAILS AT AS INSTANCE CREATION DUE TO PERM SIZE ERROR
•10287335 CANNOT START BISERVER1 . SWITCH TO JSSE FRAMEWORK REQUIRED
•10302421 OBIEE 11G WINDOWS PROMPTS FOR USERNAME / PASSWORD AFTER ENCRYPTING CREDENTIALS
•11849674 SAG: DISCREPANCY IN DOCUMENTED ORACLE DATABASE REQUIRED FOR MAPVIEWER
MIGRATION
•7432799 ORACLE EUL CONVERTER CRASHED WHILE GENERATING A REPOSITORY
REL_NOTES
•12604761 TWO STEPS OF THE UPGRADE TO 11.1.1.5.0 ARE NOT CLEARLY DOCUMENTED
SCHEDULER
•10036466 “RE-RUN INSTANCE(S) NOW” MENU IS NOT AVAILABLE FOR COMPLETED JOB INSTANCES
SECURITY
•8996295 PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENTIFICATION
•9216995 PROVIDE LATEST DETAIL INFORMATION ABOUT HOW TO SETUP LDAP SSL FOR OBIEE
•10194154 TECHNOTES- PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENT
•10198837 BIEEHOME LOGIN PAGE IS NOT DISABLED EVEN AFTER ENABLING THE SSO
•10218031 USING EXTERNAL DB TABLE TO SET ROLES SESSION VARIABLE DOESN’T ACCEPT LONG NAMES
•10373788 IF OBJECTGUID PUBLISHED AND SAMACCOUNTNAME CHANGED USER CANNOT CONNECT ANYMORE
•11731080 QA:SECURITY GUIDE NEEDS UPDATE FOR DEFINING A USER SESSION VARIABLE
SERVER
•6510747 NETWORK FAILURE DURING PHYSICAL QUERY HANGS END USER WITHOUT ERROR MESSAGE
•6836444 OBIEE SERVER SYSTEM DATE IS WRONG AND DOES NOT MATCH MACHINE SYSTEM DATE
•8371912 BI SERVER CRASHES ON NAVIGATION SPACE MAP RACE – SR 3-887711721
•9433198 DOCUMENT SYSLOG ENTRIES IN SYSTEM ADMINISTRATOR’S GUIDE
•9696424 DOC INSTANCECONFIG PARMS ALLOWEDLANGUAGES & ALLOWEDLOCALES IN SYSADMIN GUIDE
•9954411 PSR:MOD_SUPPORTED NOT ENABLED FOR TERADATA AND CAUSES CAMPAIGN SLOW PERFORMANCE
•10258683 REQUEST WITH COMPLEX FILTER IS CONSUMING ALMOST ALL CPU & NO SESSION IS CREATED
•10258755 EXCEL FAILS TO CONNECT TO 11G BI SERVER USING ODBC DSN
•10335924 REPORT-BASED TOTALS FAIL ON MEASURES CONTAINING AGGREGATION EXPRS SUCH AS FILTER
•10374571 NEED FLEXIBILITY TO OVERRIDE HOSTNAMES WHEN CUSTOMER DNS IS INCORRECT OR BROKEN
•10650122 PIVOT VIEW WITH UNION OF NON – COMPATABLE TYPE ERROR IN OBIEE 11G AFTER UPGRADE
•11804596 NQQUERY LOG LEVEL 2 IS TOO VERBOSE – BACKPORT 10308263 TO 11.1.1.5
•11809295 NQUDMLGEN NOT GENERATING UDML FILE IN UTF FORMAT
UPGRADE
•9886765 ERRORS ENCOUNTERED WHEN UPGRADING WEB CATALOG USING UA.BAT
•10121344 ERROR IN LOG USING UA TO UPGRADE BI SCHEDULER SCHEMA ON SQL SERVER DATABASE
•11069928 UPGRADE SHOULD HANDLE PROMPT WITH INCONSISTENT VALUES AS 10G DOES
WEB_ADMIN
•8564456 SHARED FOLDER ACCESS PERMISSION ISSUE
•9381764 CATALOG MANAGER COPY FUNCTION NOT WORKING AS EXPECTED
•9739865 EXITING MANAGE SESSION RESULTS IN HTTP ERROR
•10016252 LACKING INFORMATION ON FORCEABSOLUTECOMMANDURL FOR ABSOLUTECOMMANDURLPREFIX
•10144989 WEB CATALOG DOES NOT UPGRADE TO 11.1.1.3.0
•10218524 VALIDATION ERROR AFTER THE UPGRADE OF WEBCATALOG TO OBIEE 11G
•11723425 INCORRECT DEFAULT VALUE OF DEFAULTROWSDISPLAYED IN THE INSTANCECONFIG.XML
•11827202 OPMN NOT STARTING AFTER SETTING UP THE REPLICATION AGENT
WEB_GNRL
•10191078 FILTER VALUES ARE RESET IN GO URL WHEN COLUMNS ARE SORTED OR RE-ARRANGED
•10360461 NEED ABILITY TO CONTROL NEW, DASHBOARD AND OTHER HEADER LINKS
•11780508 10G COLUMN FILTER PROMPT WITH PROMPTCAPTION ATTR NOT UPGRADING
•12416695 TOOLTIP EMPTY IN MAPVIEWER
WEB_INTGRT
•10294759 FMAP-REFERENCED IMAGES IN ANALYSIS HEADERS DONâ€™T APPEAR IN DOWNLOADS TO EXCEL
WEB_MKTG
•8692820 DIRECT DATABASE CAMPAIGN LOAD FORMAT COMBINED LISTS FAILS
•9908019 SAW SERVER CRASH WHEN LOADING A PARTICULAR CAMPAIGN
•9935859 UNGROUP OF SEGMENT BLOCKS CORRUPTS SEGMENT DEFINTION AND BAD COUNTS
•10331355 MOVING CRITERIA WITHIN A SEGMENT’S GROUP CORRUPTS THE INCLUSION OPTIONS
Thanks,
RM

Synchronisation error code 8393f010??

Hi!
I just got N97 and tryied to synchronisize it with Nokia Ovi Suite 2.2...(newest one) and it gave me that error code. There are contacts etc from my N95 and I'd like to transfer those from ovi suite to N97. And of course the maps etc at some point.
I have no problems with n95. And the Ovi suite does recognize the new phone. I was able to synchronisize songs but that's it. Everything else fails.
I have now transferred contacts etc from n95 with bluetooth but it would be nice to get the ovi suite working as well. Any suggestions?

Dear all,
The same difficulty ifaced in my nokia E-52 while updation
First i updated OVI then im trying to update device software while adding the device i am
facing same problem
And while connecting the USB message shows that driver is not installed contact
product manufacturer.
Can anyone tell why Skype is not supporting in my device but it works previously
once i deleted skype and tried to install again but the skype is shown in a faded
color in ovi
Waiting for suggestion & clarification
Siva

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

While activating a request in DSO getting error code 10

While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi

Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.

Some data in ... could not be read or written. (Error code -36).

Hello.
I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
Thanks.
Mac mini Mac OS X (10.4.3)

I experienced a problem in a familiar way.
After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
Somehow the proces stopped prompting an -36 error over some files.
When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
Any-one a solution?
Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

XI Error code...clarification

Similar Messages

Maybe you are looking for