XI Error: Unable to read from SLD

I have created product, software components, Technical system and business system in SLD. I am trying to import into design (Integration Repository) for further steps but it gives an error saying unable to read from SLD. I am using SAP XI 7.0
How do i rectify this error to import them into I.R ?

Sridhar,
Please read the below thread and try to check all the replies in the thread .It will be very much useful.
Unable to read software component versions from SLD
Best regards,
raj.

Similar Messages

Zen Xtra (Nomad) - Unable to read from device error (have tried everythi

Recently, I've been having problems with my Creative Zen Xtra Nomad mp3 player. One day it started freezing and lagging massi'vely when I would enter nomad explorer. Now it's virtually impossible to drag and drop something from nomad explorer to my computer or vise versa (keep getting the unable to read from device error). However, sometimes I am able to get an mp3 or two after about 5 minutes of transfer time.
I have no idea why it is doing this. One day I'm transferring my data back and forth with no problem, and the very next day I am getting this freezing, lagging, and errors when trying to transfer. The only thing that changed was me formatting my computer in between it working and it not working, but I did reinstall the driver and nomad explorer once I formatted (I'm also using the same USB 2.0 cable, but it worked fine the day before, so I am pretty sure that's not part of the problem). I was using the mp3 player to store about 0 GB worth of data for when I formatted, and now I'm unable to retrieve virtually any of it. I've tried everything under the PC Connectivity link short of formatting the mp3 hard dri've (and that is not an option because I need the files). I took it to a friends house to try on his computer, but it acted the same way. I'm completely stumped. Is there anything I haven't ruled out? Also, I'm running Windows XP Pro SP2, and I was using SP2 before the format as well if that has any relevance.
Please let me know if I've left out any important information relevant to this issue. Any help would be very much appreciated.
Thanks in advance.
-Noah Patterson
Edit: I'm having the exact problem as this guy, but I didn't seem to find any answers on his thread.
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=6459&query.id=3264 5#M6459
Message Edited by talzok on 09-20-2005 08:03 AMMessage Edited by talzok on 09-20-2005 08:09 AM

Never use MP3 players to store important data, or as a single point of storage for any data (that includes keeping a backup of the player's audio tracks). You can have problems like this with accessing the data, as well as simply dropping the player and losing the lot.
There are a couple of methods I've seen that have worked to retrieve data:
. Driver update - either update to the latest drivers, or nonsensically downgrade to the drivers that come on the install CD.
2. Notmad Explorer - use the Xtreamer function in Notmad Explorer's trial version (which is free) to access the data and download it. It will be tedious, because I assume you have to download one file at a time.
As for your general problem, I would try using Creative's MediaSource instead of Nomad Explorer to access the player (people generally don't have good experiences with Nomad Explorer).
Also make sure you download the latest versions of the drivers (taking above into account), MediaSource, and the MediaSource plugin from Nomadworld.com downloads.
Once you have the data off (hopefully!) you might simply want to reformat it if none of the above hel
ps.

Error: Unable to read footer file

Hoping someone out there can help me. I get this error on
everypage in my site and have no idea how to stop it.
Error: Unable to read footer file
The error does not show up when I preview inside dreamweaver
but only rears its ugly head after I post the site up on the
internet. I have searched for hours through the Dreamweaver menus
and can not find these elusive footers and have no idea where they
are coming from or what footer file it is trying to read.. Please
help. This probably has a simple solution and I am just not able to
understand it. Thank you.

sdrouillard wrote:
> This probably has a simple solution and I am just not
able to understand
> it.
Possibly, but without a URL we can't comment. Post it, and
we'll see.
At a guess, sounds like an include file is missing. Are you
on some sort of
free hosting plan where the host puts some adverts in the
footer? If that
file is removed from your site directory you might get the
error you've
mentioned (at least, that was the case on the only other time
I've seen this
error)
Regards,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing

Frm-40502: oracle error: unable to read list of values

Hi All,
I am personalizing the assignment form, where we need to restrict the JOB LOV based on Organization value.
In Forms Personalization we are creating the record group from query and attaching to Job field.
The query is,
SELECT DISTINCT j.NAME, DECODE (1, 2, 1, NULL) c_valid_job_flag,
j.job_id job_id
FROM per_jobs_v j
WHERE j.business_group_id + 0 = :CTL_GLOBALS.BUSINESS_GROUP_ID
AND j.date_from <= :CTL_GLOBALS.SESSION_DATE
AND ( (j.date_to IS NULL)
OR (j.date_to >= :CTL_GLOBALS.SESSION_DATE)
ORDER BY j.NAME
When we use this query, we are getting the error "frm-40502: oracle error: unable to read list of values"
If i replace the bind variable with values we are not getting the error and its working fine.
Replace query:
SELECT DISTINCT j.NAME, DECODE (1, 2, 1, NULL) c_valid_job_flag,
j.job_id job_id
FROM per_jobs_v j
WHERE j.business_group_id + 0 = 202
AND j.date_from <= TRUNC(SYSDATE)
AND ( (j.date_to IS NULL)
OR (j.date_to >= TRUNC(SYSDATE))
ORDER BY j.NAME
how to use bind variables (Block.field) here? We are getting this error only when using the bind variable in the query.
Please share your ideas.
Thanks.

Hi;
What is your EBS version? There are 96 docs avaliable about similar error message. I suggest use metalink for your issue
You can also check:
FRM-40502: Oracle Error: Unable To Read List Of Values [ID 1161404.1]
Frm-40502: Oracle Error: Unable To Read List Of Values. [ID 351931.1]
FRM 40502: Oracle Error:Unable to Read List of Values [ID 179162.1]
Regard
Helios

Forms Personalization - FRM-40502: ORACLE error: unable to read list of val

Hi,
I am using Forms Personalization to create an LOV using builtin. In the Builtin, I have put the sql query under create record group from query. In the query, when I hardcode a value, in a where condition, the LOV works fine but when I replace the hardcoded value with :block.field value, it gives the error, FRM-40502: ORACLE error: unable to read list of values. Below is the part of the sql query where I am facing this issue.
"WHERE related_customer_id = :ORDER.INVOICE_TO_CUSTOMER_ID"
Please get back to me if anyone has faced similar problem.
Thanks all in advance,
Regards,
AN

Please post a new thread for each issue. Tacking onto a 2 year old post is generally a bad idea.
Forms personalization is a feature in Oracle E+Biz Suite and as such you should post your question in this forum:
OA Framework

Unable to read from Jukebox Need Urgent he

Need help, fast, Only got and a half day left to get my Creative Zen Touch to work, I have tons of important files in it and I need it badly!I'v been using my Zen touch as a storage device like a USB or sumthin, newaiz, I just upgraded the firmware to .0.03, from .00.06 to .0.03 to be more detailed. I have read some other posts relating to this kind of matter, I tried the ... Disc Clean Up solution, downloading the latest software except those CD burners program, I uninstalled all of my Creative Programs and installed an older version of the program and still didnt work then I upgraded those program and still wont work. Went to read the FAQs, couldnt find any answers. Can anyone please give me a useful response? I need it badly Please be fully detailed, I am not very familiar with shortcut details. Thanks

Sorry this is not an answer but I just posted this on the European boards and it might make solving this problem a bit easier:
Player: Nomad Jukebox Zen Xtra 30GB
Firmware: .20.08
Explorer: 3.0.0
Driver: .26.02
OS: XP SP2 updated
MB: MSI K8Neo Platinum (MS-7030) (AwardBIOS 6.00PG)
Processor: AMD Athlon64 3200+
Memory: GB Patriot 3200 DDR
Video: ATI Radeon 9600 Pro (DNA 3.4.4.) (Directx 9.0c)
Sound: Audigy Gamer (03030 driver)
HD: Maxtor 6Y60MO (60GB)
So I made the mistake of using my mp3 player as the sole backup device for 30 Gigs of my music. I used the motherboards included highspeed USB port by the way. So now that I have reformatted and reinstalled everything I try and copy it all back from the Data Library section of my player using Nomad Explorer and end up waiting a few minutes while the software decideds if it will freeze or not before ending up with an error of: "unable to read from jukebox device"
This is MOST DISTRESSING, I would really appreciate more help than the other 2 people who posted this problem got (read: none). So if anyone has any ideas besides reinstall nomad explorer (which I did) then I am all eyes.
Thank you for your time and help.
Nick T
Maybe if you could post your system specs we could see a similarity or two, like what type of USB port did you use...Message Edited by kalisto_9 on 0-02-2005 0:08 PM

B2B RosettaNet incoming messages throws error "Unable to read the preamble"

Hi,
We have configured Oracle B2B to send Invoices to TP using Rosettanet V2.0.
The incoming message are coming to B2B server via DMZ running apache HTTP server. We have security certificates installed on DMZ and has shared the public key with the TP.
TP has shared public key which we have installed on SOA server keystore.
We are able to see incoming messages in "Wire Message" tab, but the status is "processing". The SOA log file shows the error "Unable to read the preamble".
Any suggestion on this really appreciated.
Thanks,
Adarsh

The configuration that we have here is -
Outbound
SOA -> <Firewall> TP
Inbound
TP -> DMZ(SSL Enabled) -> FIREWALL -> SOA Server
SOA server is SSL enabled too, but the communication between DMZ and SOA has been configured on HTTP (non SSL). We shared the public key of DMZ server with the TP.
Here is the message that we are receiving from TP.
--27888100.1321681003096.JavaMail.webmethods@exshaw
Message-ID: <14801385.1321681003095.JavaMail.webmethods@exshaw>
Mime-Version: 1.0
Content-Type: multipart/related; type="application/xml";
boundary="----=_Part_6149_9357410.1321681003080"
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Preamble
Content-ID: <16966956.1321681003078.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE Preamble SYSTEM "Preamble_MS_V02_00.dtd">
<Preamble>
<standardName>
<GlobalAdministeringAuthorityCode>RosettaNet</GlobalAdministeringAuthorityCode>
</standardName>
<standardVersion>
<VersionIdentifier>V02.00</VersionIdentifier>
</standardVersion>
</Preamble>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Delivery-Header
Content-ID: <18073579.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE DeliveryHeader SYSTEM "DeliveryHeader_MS_V02_00.dtd">
<DeliveryHeader>
<isSecureTransportRequired>
<AffirmationIndicator>Yes</AffirmationIndicator>
</isSecureTransportRequired>
<messageDateTime>
<DateTimeStamp>20111118T223643.053Z</DateTimeStamp>
</messageDateTime>
<messageReceiverIdentification>
<PartnerIdentification>
<domain>
<FreeFormText xml:lang="EN">DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier>
</PartnerIdentification>
</messageReceiverIdentification>
<messageSenderIdentification>
<PartnerIdentification>
<domain>
<FreeFormText xml:lang="EN">DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>200103377</GlobalBusinessIdentifier>
<locationID>
<Value>Calgary</Value>
</locationID>
</PartnerIdentification>
</messageSenderIdentification>
<messageTrackingID>
<InstanceIdentifier>ac1aab8df70da53a000ca325</InstanceIdentifier>
</messageTrackingID>
</DeliveryHeader>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Service-Header
Content-ID: <27927869.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE ServiceHeader SYSTEM "ServiceHeader_MS_V02_00.dtd">
<ServiceHeader>
<ProcessControl>
<ActivityControl>
<BusinessActivityIdentifier>Invoice Notification</BusinessActivityIdentifier>
<MessageControl>
<fromRole>
<GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
</fromRole>
<fromService>
<GlobalBusinessServiceCode>Buyer Service</GlobalBusinessServiceCode>
</fromService>
<inReplyTo>
<ActionControl>
<ActionIdentity>
<GlobalBusinessActionCode>Invoice Notification</GlobalBusinessActionCode>
<messageStandard>
<FreeFormText>PIDX</FreeFormText>
</messageStandard>
<standardVersion>
<VersionIdentifier>1.0</VersionIdentifier>
</standardVersion>
</ActionIdentity>
<messageTrackingID>
<InstanceIdentifier>33323237303737323338343533343832</InstanceIdentifier>
</messageTrackingID>
</ActionControl>
</inReplyTo>
<Manifest>
<numberOfAttachments>
<CountableAmount>0</CountableAmount>
</numberOfAttachments>
<ServiceContentControl>
<SignalIdentity>
<GlobalBusinessSignalCode>Exception</GlobalBusinessSignalCode>
<VersionIdentifier>V02.00</VersionIdentifier>
</SignalIdentity>
</ServiceContentControl>
</Manifest>
<toRole>
<GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
</toRole>
<toService>
<GlobalBusinessServiceCode>Seller Service</GlobalBusinessServiceCode>
</toService>
</MessageControl>
</ActivityControl>
<GlobalUsageCode>Test</GlobalUsageCode>
<pipCode>
<GlobalProcessIndicatorCode>P21</GlobalProcessIndicatorCode>
</pipCode>
<pipInstanceId>
<InstanceIdentifier>PIPAC11165C133BA538E8A0000018B17B6C</InstanceIdentifier>
</pipInstanceId>
<pipVersion>
<VersionIdentifier>1.0</VersionIdentifier>
</pipVersion>
<KnownInitiatingPartner>
<PartnerIdentification>
<domain>
<FreeFormText>DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier>
</PartnerIdentification>
</KnownInitiatingPartner>
</ProcessControl>
</ServiceHeader>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Service-Content
Content-ID: <24309402.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE Exception SYSTEM "Exception_MS_V02_00.dtd">
<Exception>
<ExceptionDescription>
<errorClassification>
<GlobalMessageExceptionCode>PRF.ACTN.GENERR</GlobalMessageExceptionCode>
</errorClassification>
<errorDescription>
<FreeFormText>Errors: The Invoice Number entered already exists.; Warnings: Using default Supplier Site., Using default Supplier Group., Using default Supplier User., Units has been truncated.</FreeFormText>
</errorDescription>
<offendingMessageComponent>
<GlobalMessageComponentCode>ServiceContent</GlobalMessageComponentCode>
</offendingMessageComponent>
</ExceptionDescription>
<GlobalExceptionTypeCode>Receipt Acknowledgment Exception</GlobalExceptionTypeCode>
</Exception>
------=_Part_6149_9357410.1321681003080--
--27888100.1321681003096.JavaMail.webmethods@exshaw--

External USB boot: "fs error - unable to read inode" occurs eventually

[ISSUE: on ONE PC only: ALL external USB drives eventually give console readout like: "fs error - unable to read inode" - endlessly , and no longer accessible.]
I am BOOTING off of the drives in question [ext2 formatted] which may be a large part of it though perhaps not.
PC spec:
- Older motherboard ASUS p4pe.
- has USB 2 though probably a bit iffy.
- Does NOT boot from USB so using the briilliant PloP bootmanager on CD to achieve external USB boot.
Of interest was comments found about the : the ehci_hcd module
which seems very likely that the motherboard I'm having problems with is because of the USB implimentation and this.
REALLY could use a fix for this one. At least, I need to understand what's happening.
OR:
I found this on the Ubuntu forum and was hoping it would be the FIX and that I could get a comment about how to try on my beloved ARCH systems.
------------ Script TEXT from forum over at ubuntu -----------
http://ubuntuforums.org/showthread.php?t=452246
The POSTER there replied saying the following:
problem: USB disk change to read only
Hi,
I solved this 7-8 months ago and haven't had any problems since.
Create a executable file for example /usb/bin/usbhdfix and place the following in it.
Code:
#!/bin/bash
echo 1024 > /sys/block/$1/device/max_sectors
echo 1 > /sys/block/$1/device/scsi_disk:*/allow_restart
1024 works for me but I've also heard about people going lower than default with good results.
I have a Seagate FreeAgent which also have the problem with restarting after spinning down so solution for that is added as well.
Then create a udev-rule.
Code:
# /etc/udev/rules.d/50-fix_usb_hd.rules
SUBSYSTEMS=="scsi", ATTRS{vendor}=="Seagate", ATTRS{model}=="FreeAgentDesktop", RUN+="/usr/bin/usbhdfix %k"
================== BUNCH of LINKS that seemed possibly relevant ==========
https://bugs.launchpad.net/ubuntu/+sour … +bug/88746
http://ubuntuforums.org/showthread.php?t=452246
http://ubuntuforums.org/showthread.php?t=991613
http://bbs.archlinux.org/viewtopic.php?id=63126
http://bbs.archlinux.org/viewtopic.php?id=53822
Last edited by yvonney (2009-03-29 20:11:19)

Sirrah wrote:How do I manually mount a drive that automounts?
As root:
ntfs-3g /dev/sdX /mnt/mountpoint
or
mount -t ntfs-3g /dev/sdX /mnt/mountpoint
http://wiki.archlinux.org/index.php/NTFS_Write_Support
You can also pass other options to mount: (in this example drive is ext3)
mount -t ext3 -o user,rw,async /dev/sdX /mnt/mountpoint
check man mount for all the details.

Yaourt error - unable to read pkgbuild

Hi,
Trying to install any package from AUR using yaourt -S <pkgname> I get an error "Unable to read PKGBUILD for <pkgname>"
I have no clue how to troubleshoot this. I can edit the PKGBUILD OK. This has happened on every AUR package I have tried and only started yesterday. Here is the problem
$ yaourt -S powernowd
==> Downloading powernowd PKGBUILD from AUR...
bsdtar: Removing leading '/' from member name
x .
x PKGBUILD
x powernowd.rc.d
x powernowd.conf.d
First Submitted: Wed, 12 Dec 2007 04:39:19 +0000
powernowd 1.00-1 : Program for powering down CPUs dynamicly
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
Unable to read PKGBUILD for powernowd
==> WARNING: Following packages have not been installed:
powernowd
and here is yaourtrc
# yaourtrc - Configuration for yaourt
# See yaourtrc(5) for more information
ABS_REPO=(testing core extra community-testing community gnome-unstable kde-unstable)
#NOCONFIRM=0
#FORCE=0
#AUTOSAVEBACKUPFILE=0
#FORCEENGLISH=0
#EDITFILES=1
#AURCOMMENT=1
#DEVELBUILDDIR="/var/abs/local/yaourtbuild/"
#DEVEL=0
#NOENTER=1
#AURUPGRADE=0
#AURVOTE=1
#AURSEARCH=1
#TERMINALTITLE=1
#EXPORTDIR=""
#TMPDIR="/tmp"
#MAXCOMMENTS=5
#EDITOR="$EDITOR"
#PACMANBIN="/usr/bin/pacman"
#COLORMODE="normal"
#SHOWORPHANS=1
#DIFFEDITCMD="vimdiff"
#DETAILUPGRADE=1
thanks for any pointers

syne wrote:
Had the exact same problem. I suggest you reinstall your pacman, or if you have pacman-git, then replace it with regular pacman. That did it for me. I will try building git once more to see if it that as well would solve the problem.
Hope it helps.
This makes no sense. It's not makepkg that's failing -- It's yaourt. Use makepkg on its own. Submit a bug report to the yaourt maintainer.

Unable to read from jukebox devi

i've fot a creative zen touch. when i try to access the data i have stored in it, i cannot acces it. i get an error that says "unable to read from jukebox device." what can i do? may someone please help? i would greatly appreciate it. thank youMessage Edited by s80 on 0-02-2005 08:20 PM

Sorry this is not an answer but I just posted this on the European boards and it might make solving this problem a bit easier:
Player: Nomad Jukebox Zen Xtra 30GB
Firmware: .20.08
Explorer: 3.0.0
Driver: .26.02
OS: XP SP2 updated
MB: MSI K8Neo Platinum (MS-7030) (AwardBIOS 6.00PG)
Processor: AMD Athlon64 3200+
Memory: GB Patriot 3200 DDR
Video: ATI Radeon 9600 Pro (DNA 3.4.4.) (Directx 9.0c)
Sound: Audigy Gamer (03030 driver)
HD: Maxtor 6Y60MO (60GB)
So I made the mistake of using my mp3 player as the sole backup device for 30 Gigs of my music. I used the motherboards included highspeed USB port by the way. So now that I have reformatted and reinstalled everything I try and copy it all back from the Data Library section of my player using Nomad Explorer and end up waiting a few minutes while the software decideds if it will freeze or not before ending up with an error of: "unable to read from jukebox device"
This is MOST DISTRESSING, I would really appreciate more help than the other 2 people who posted this problem got (read: none). So if anyone has any ideas besides reinstall nomad explorer (which I did) then I am all eyes.
Thank you for your time and help.
Nick T
Maybe if you could post your system specs we could see a similarity or two, like what type of USB port did you use...Message Edited by kalisto_9 on 0-02-2005 0:08 PM

[Not Just Me] Error: Unable to delete from online list.

I've just tonight started to get the following error when trying - sometimes - to load a forum page:
An error was encountered
Error: Unable to delete from online list.
I did update Firefox earlier (23.0.1) so I'm not sure if that might be related. Mostly it works fine but I have gotten this error now several times. I have also got a 504/gateway error once or twice.
Is anybody else seeing this? Or has any idea why I am?
Last edited by cfr (2013-08-18 02:17:03)

I've been getting these errors pretty often since about early July.
Sometimes my posts finally gets submitted a couple minutes after I click the button.
I have no other issues with my browser or other websites, I'm not maxing out my bandwidth etc.

"error occured while reading from device"

when trying to sync our itouches the device is initailly recongnized in itunes and will begin to sync , but never gets through the whole proccess - each time it gets to a different step, but always ends with error message "ipod cannot sync as an error occured while reading from device" or something close to that...any ideas or help please....
i have checked the usb drivers...uninstalled and reinstalled itunes and removed the security software that I can find....

It could be to either a problem with a "file" that is either one the iPod or on the computer that is trying to be read for syncing. I would in order:
- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod via iTunes. First from backup then to factory defaults/new iPod.

Error message, what does this mean: Itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again

Getting error Can't read from the source or disk when moving documents from one folder to another folder in the library

Hi,
When we try to move documents from one folder to another folder in the document library using "Open with explorer" getting beloe error.
Can read from the source file or disk.
The user having below permission for the Library as well as site.
Fullcontrol,Limited access--->Given directly
Read,Limited access--->Givin through the all Test grp
Contribute,Limited Access-->given through test members grp
Read,Limited access---> givin through The group grp
Could you please help me anyone....
Thanks

Hi Reddy,
If you are moving files in two libraries in different sites, then the error will occur and it is by design that there are limitations on the DAV move commands that the DAV client is respecting.
https://social.msdn.microsoft.com/Forums/en-US/6245f332-c609-4a7b-8e00-c8b5e46f7759/cant-move-files-using-windows-explorer-cant-read-from-source?forum=sharepointgeneral
If you are moving files in the same library, I recommend you to use Wireshark to reveal the error message and enable IIS
Trace Logging for Failed Requests to examine the IIS log file for troubleshooting.
https://social.msdn.microsoft.com/Forums/en-US/47cd569d-98f2-4cca-b78e-fd178c097285/cant-read-from-the-source-file-or-disk?forum=sharepointgeneralprevious
To narrow down the issue scope, I recommend you to test with another library and see if the copy in explorer can work.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

HT4528 I can't seem to sync my iPhone with iTunes. I keep getting this message: iTunes could not connect to the iPhone because an error occurred while reading from this device. What can I do?

I can't seem to sync my iPhone to my computer; I keep getting this message: "iTunes could not connect to the iPhone because an error occurred while reading from this device." I get the same message with my iPad, even though they all share the same account. What can I do?

This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here:http://docs.info.apple.com/article.html?artnum=305743

XI Error: Unable to read from SLD

Similar Messages

Maybe you are looking for