Xi-Fi and CD - DVD connect
Till now I use an Audigy2 and I have internal connection from my CD-DVD to SB card via CD-IN or SPDIF, I want to change to a new Xi-Fi SB card but I saw that are not more present that internal connection, why ?
Are not more necessary ?
Thanks
Luca
It isnt needed. All that is used is the IDE cable now. As proof of this just try unpluggin the connection you have between the dri've and the card and you will see that cd's will play normally.
Furthermore; if you look in your volume control panel you will see that the cd player section can be totaly musted/turned down and the wave slider actually controls the volume of what you are hearing from you cd. This is again because all the data is passed from the dri've, throught the IDE and eventually to the card.
Similar Messages
-
Trouble connecting tv and oppo dvd wifi dongles to tc
How do I enable TC to accept Panny plasma and oppo dvd player.tv says router not accepting but does recognize my network.
Take off all security on the TC, and connect just as standard client. If that works, increase the security to WPA and see if it still works. Use passkey of around 12 characters, alphanumeric only.
If you still have issues, change the wireless to manual and set to channel 1, 6 or 11 in turn and see if one is better than the other.. Make sure you allow G wireless to connect. -
Stuttering, bleeps, and lost DVD drive on Satellite M40-149
Hi
For a while now the laptop will run ok for around 1 - 2 hours, then all of a sudden the speakers will start making random high pitch very loud distorted bleeps. When this starts, the system starts stuttering. Every 2 seconds or so it will freeze for about 1/4 of a second. All processing freezes - including sound and display. This is annoying but usually a gentle shake sorts it out...
Occasionally when this happens the DVD drive will disappear too, and I need to restart to get it back. Sometimes I need to leave it off for a short while so I think this may be something to do with overheating?
Anyway, my main problem now is that the DVD drive is very rarely present. I've used some firmware analysis tools and the port connection to the drive is present but the laptop cannot communicate to it. I've thought perhaps updating the DVDs firmware may fix this but I haven't been able to yet.
I couldn't find any previous reports of this. Does anyone have an idea what this could be? Or how I can fix it?
If it came to it I'd be happy to buy an external DVD drive, but the presence of the bad connection is interfering with some other tasks I'm doing....
Thanks,
David.LOL :D I have read on many websites that the iTunes software makes troubles and is not fully compatible with Microsoft.
Apple and Microsoft together ?:| nice idea ;)
Thanks for the info dude ;) -
IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play
I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
Decrypt and Copy DVDs to Hard Drive easily and fast
Summary:DVD43 can’t work well on your Windows 8/7/XP/Vista
((64-bit)? Today we’ll look at drop dead simple method to decrypt and
copy DVDs with the best DVD43 alternative, so you can easily copy DVD
movies to your hard drive.
Have you ever wanted to make backup copies of your DVDs? DVD43 is a
very popular free DVD decrypter to help you decrypt DVDs on the fly so
that your DVD copy program can read DVD discs. Although DVD43 plug-in
have been released to bring wide compatibility with Windows 64 bits,
most DVD copy programs don't yet support decrypter plug-ins. Plus, DVD43
can't deal with the new DVD copy protection for its relatively slow
update. Therefore, in order to backup DVD effortlessly, you’d better to
find a DVD43 alternative to copy DVD movies on Windows(Windows 8) included.
In my view, a good alternative to DVD43 should be able to backup DVD
with high quality and supports various DVD disc types to suite your
needs. Here Brorsoft DVD Ripper
is highly recommend to you. With it, you can decrypt, copy your
protected DVD in Windows within a few simple clicks. Besides removing
DVD copy protection, you can copy DVD movies to hard drive with original
DVD structure or just backup the main movie as you want. What’s more,
it also enables user to rip and convert DVD to a wide variety of video
formats like MP4, MOV, M4V, MP4, WMV, AVI, MPG, FLV, MKV, etc for
different use. If you're looking for DVD43 alternative for Mac, please turn to DVD Ripper for Mac.
[How-to] Rip/Copy DVDs with Best DVD43 Alternative:
Step 1. Load DVD info > Insert a source DVD in optical drive. Install and launch the excellent
alternative tool for DVD43.
Click disc button to load DVD movies. You can select subtitles and
audio track (English, French, German, Spanish…) for each chapter. Forced
subtitles can be attained, too.
Step 2. Copy/backup your DVDs
Option A - "Full Disc Copy" without anything loss
Click quick button "Copy the entire disc" to starts copying disney DVD disc to hard drive maintaining the original structures.
Option B - Directly Copy DVD main movie only
P.S. If you want to encode your DVD media to a playable,
editable format, just click the Format bar and choose your desired
format from the drop-down list. Various output formats like MP4, MOV,
MKV, FLV, WMV, AVI, etc. are provided. Moreover, kinds of presets for
portable devices and video editing software like iPhone, iPad, iPod,
iMovie, Final Cut Pro, Samsung, HTC, Motorola, etc. are provided to help
you get videos with optimized settings to best fit your devices or
software.
Step 3. Start to rip and backup DVD on Windows > Click
“Convert” button to start converting, copying DVD movies using the
alternative to DVD43. When the conversion complete, you can get the
converted videos and store, play, edit and share them anywhere you like.
Editors' note: With decent decrypting capability, high
quality video output and considerate backup solution and specific format
templates for versatile PMP devices (iPad, iPhone, Apple TV, Xbox, PS3,
Android tablets and phones, etc), Brorsoft DVD Ripper ranks top on the
DVD ripping application list. Meanwhile Brorsoft provides excellent
customer support service, including lifetime free upgrade of product and
technical support. Users can contact the support staff via email for
help and suggestion.
Source:Get the Best DVD43 Alternative to copy DVD movies
[quote] androidiosconvertertips.altervista.org/blog/alternative-for-dvd43-decrypt-and-copy-dvds-to-hard-drive-easily-and-fast/ [/quote]What you want to do is select the files you want to move then go File>Relocate Masters. Your images will then be referenced to a location you select. Aperture will still continue to manage the images, but the external hard drive must be connected if you want to make adjustments. Aperture will retain Metadata and any adjustment information. Your original images will stay unmodified on your external drive.
Jeff -
HI! I have a new macbook air but having difficulty connecting to a router if I am about 10 meters away. My iMac, iPad, iPhones and iPods can connect easily. Is there something that I need to configure? I have no issues if I am close to it. Thank you!
Hello, If you are dealing with one of the really thin iMac's that have no superdrive, then the superdrive icon should not appear on the desktop when you plug it in, but when you put in a disk (CD, DVD, etc.) that should appear. If you go into disk utility, and look at superdrive, that should be clickable and not grayed out when you have it plugged in. If this does not show up in disk utility, go to Apple, and ask to speak to their supervisor, speaking to a customer service agent is like talking to a potato, nothing gets done. Good Luck!
-
Alternative to Blu-Ray and HD DVD players?
I just watched The Keynote presentation for 2008 and saw that there is a new software update that revolutionizes the Apple TV. The first idea that came to mind is the battle between Blu-Ray and HD DVD. With the HD capabilities of the Apple TV now and Dolby Digital 5.1 support, would it be safe to say that, if one wasn't worried about having a hard copy of the HD movie, the Apple TV could be an alternative to the battle of the current generation of formats?
Could one say that the Apple TV does the same job as these high definition players? Let it be noted that I haven't experienced movie quality in iTunes yet.There are 3 separate issues here.
First, the monitor quality and capability:
If you have 1920x1080 resolution monitor that can display 1080p (progressive scan), then ATV will be significantly inferior than BRD or HD/DVD player sending 1080p signal natively to full HD monitor. If your monitor is less than that (say 1366x768 or 1280x720 and can handle only 1080i (interlace) or 720p), probably not all that much different than ATV displaying at 720p (which is 1280x720). The only thing is the amount of bitrate (data per/second) that ATV content provides versus BRD or HD/DVD content.
Second, all BRD and HD/DVD players "upscales" 480i DVD (Stand Def) content to 1080i/p, which can be quite good. I've not been impressed with ATV's ability to upscale 640x480 content (iTune SD content) to large monitors. Also, SD DVDs are actually encoded at over 800x480 for widescreen content these days and bitrate is much higher than 1500 for iTune movies.
Third issue:
The audio on ATV HD content is 5.1 whereas DolbyHD and DTS equivalent are 7.1 - which if you have setup your room with 7.1 system (like I have), 5.1 is a bit of a disappointment. Further, SD DVD from iTune store is still DD2.0, and while most receivers can handle that into DD-II/IIx, it is simulated and not discrete sound output. SD DVDs have 5.1, 6.1 and 7.1 depending on content/movie.
So the long answer to being BRD or HD/DVD player alternative is it depends. One must tradeoff the benefit of a dedicated player in addition to ATV (or MacMini for that matter).
Certainly cannot debate about the convenience, if one has a decent broadband connection and n/g router setup. -
No Video Signal new DVD connection to LCD TV
I just got a new SD-V296KU DVD/VCR combo and connected it to a 40FT2U LCD TV player I got last year. I followed the directions in the setup guide and owner's manual exactly, but I get a "No Video Signal" error on the television. Audio does work. I originally tried with an external tuner too, but still doesn't work when TV/DVD connection only. I've tried switching the connections around (standard yellow/red/white wires) and no change. Obviously everything on the "support" website has the same instructions and can't talk to anyone who can help....can somebody here please set me straight?
With the change to Colorstream on the TV, I now have color DVD and audio...thanks, Peter. However, I still only have audio for VCR playback; even when the selection is set to 'VCR', the screen only shows as "Welcome DVD - Toshiba". This also means I cannot enter VCR menu setup for setting clock, etc
Just to clarify the original quick posts, I added since I could not get assistance on phone and wanted to make sure whoever did see this was updated with where I stood. I originally hooked up r/y/w cables per directions in guide, but change to the green/blue/red using the white and red from other for audio. I actually posted a somewhat more detailed message later the same day (as my originals here) on the DVD board, but that apparently was taken down. Here's the exact connections:
40FT2U LCD: g/b/r- green = Y/Video, blue = PB, red = PR; w/r/y- white= L/Mono, red=R; yellow = bottom on Digital Audio Out; RF modulator cable in Ant/Cable box. These hook to...
SD-V296KU DVD/VCR combo: g/b/r on 'Component Video Out' in order Green top, blue middle, red bottom; w/r/y on 'DVD/VCR Audio Out' in order white top (L), red middle (R), yellow bottom (Video Out); also have w/r/y on 'VCR Audio In' in order white top (L), red middle (R), yellow bottom (Video In) leading to...
Zenith external tuner: w/r/y - white (L), red (R), yellow (video) and RF to TV plus separate coax to antenna
I am happy about the DVD, but this combo is no good without VCR too. Your knowledge sharing is appreciated. -
ok so we bought an ipod touch for my daughter and when she connected it to the computer after she downloaded itunes, she was asked if it was her ipod or a new one, so she clicked on her ipod and lost all her recent pics plus is unable to locate the app store on her safari on her ipod touch. any suggestions as to what went wrong or what should be done ? should we restore or what?
much appreciated if there is anyone else who had this happen to them.- The iPod got erased since it sounds iTunes identified that the iPod has been synced with another computer and she said yes to making this computer her syncing computer. It could also she restored the iPod from the backup of another iPod, iPhone or iPad that was in iTunes. If in iTunes you go to Preferences>Devices is there a backup listed for her iPod with a date/time when she first connected the iPod to the computer. If so then restore the iPod from that backup.
iOS: How to back up
Note synced media like apps and music are not included in the backup,
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Regarding the App store. The App store is not in Safari. It is a separate app. Also, could the Apple store be hidden by Restrictions? Settings>General>Restrictions. Further, can you find the App store via the Spotlight search on the iPod? -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I have a black Macbook 4,1 running 10.7.5, an iMac 11,3 running 10.7.5 and a new Macbook Air 6,2 running 10.9.5., I have file sharing turned on on all machines. All machines are visible and I can connect all machines except for the Macbook Air. The Macbook air can see the other 2 Macs but does not connect to either of them or even give me the option to connect as a guest or a registered user. The other Macs connect to the Macbook Air but it will not connect with them. Any help is appreciated. Thank You.
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
"We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
location that are refreshing without issue. Can anyone think of what may be causing it?
I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue.
Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
ThanksHi Maracles,
Thanks for your post.
From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
For more information, please see:
PowerPivot Options & Diagnostics Dialog Box:
http://technet.microsoft.com/en-us/library/gg399091.aspx
Using a Trace File to Troubleshoot Errors in PowerPivot:
http://www.sqlchick.com/entries/tag/powerpivot
Best Regards,
Elvis Long
TechNet Community Support -
HEY GUYS I AM USING AN IPHONE 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
PLEASE HELP ME.This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.
-
I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?
Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung -
i just updated my iphone 4s with the new IOS6 update and now everytime i try to connect to my wifi it brings me to the apple page and will not connect to the wifi at all.. someone please help
I have the same problem, no way to change the old username in icloud on my ipad after update to ios7. Enybody knows a solution or where to look for a solution?
Maybe you are looking for
-
Missing Payment Term field on tcode FBR2 Customer Invoice Display
Hi Experts, This is a more detailed explanation on the Payment terms field issue we are encountering since last week. I have some problems with their request that they want to show the payment terms field in the transation code FBR2 - Customer Invoic
-
How do I stop ActiveSync from deleting emails on server
Hi, We came across a problem where users are deleting emails from their activesync devices accidentally. We need to stop it besides providing them activesync facility. Is there any way we can restrict sync of email deletion from activesync devices s
-
I only have a small number of photos that add up to less than 30mb, but my storage in ipad states 2.4gb of photo memory, I have ran a number of cache cleaners and photo checkers but I cannot clear this excess memory. When I try to sync it says to the
-
I have an old application built under LabVIEW 5.1.1 which opens an .iak file (the file path is embedded in the app) and reads/writes to modules attached to an FP-1000. Recently I was forced to move the setup onto a new PC and now I'm unable to get t
-
I have a iMac and want to know if I can add an additional hynix memory to it? It currently has one with an open slot next two it.