Xi-Fi Audio Notebook Windows Vista 32

I have a new laptop notebook with Windows Vista 32 bit and cannot get my Xi-Fi Xtreme Audio Notebook card to output 4. surround sound. When I do the speaker test, only the front right and front left speakers make sound. I read through some posts that I should disable onboard audio in my bios? How do I do that?

Hi,Im having exactly the same problem with vista it's very frustrating, only two of the speakers are playing sound. Just got this today but I won't be able to do anything over the weekend as I'm away but will experiment during the week. One thing I can say is when I put inthe sound card and let vista pick it up (i.e not install creative drivers) then went into speaker settings for the sound card (only listed as High definition audio card by vista) and chose 6. and did a speaker test each speaker did output sound so it means the hardware can potentially communicate to the system. However when I try to play a song etc it still only comes out of the two speakers so I think with a bit of tweaking it should be ok. I will get back to you on my results.

Similar Messages

No audio in Windows Vista Home Basic - Compaq Presario c765TU

Hi all,
A couple of days ago, my Compaq Presario c765TU lost audio while fastforwarding through a movie I was playing on VLC. The video was stored on an external hard drive. Tried playing music and video files stored on the laptop's local drive, still no sound.
Audio drivers and BIOS have been updated. Audio devices are listed as installed and working properly in the Device Manager.
Contemplating on doing a clean re-install of Windows Vista to see if that will work.
Any help would be greatly appreciated.

It's hard to know exactly which it is at this point. It could be one of two things. The speakers have failed or the jack detect pin located inside the headphone jack has failed. A non-functional jack detection pin would cause the system to route audio to the headphone jack constantly instead of the internal speakers.
If you want to be absolutely certain it is not a software issue (corrupted registry possibly), you can try the system recovery making sure to backup your files. I suspect this is a hardware issue, but it could very well be a corrupted registry causing the jack detection pin not to be read properly.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

No audio in Windows Vista from my external speakers

when using BootCamp (on the OS side), i can hear my audio through my external speakers, but when i go to the WIndows Vista side, i only get audio through the monitor itself. what can i do to fix it so that it all come through the external speakers?
thanks for any advice

It's hard to know exactly which it is at this point. It could be one of two things. The speakers have failed or the jack detect pin located inside the headphone jack has failed. A non-functional jack detection pin would cause the system to route audio to the headphone jack constantly instead of the internal speakers.
If you want to be absolutely certain it is not a software issue (corrupted registry possibly), you can try the system recovery making sure to backup your files. I suspect this is a hardware issue, but it could very well be a corrupted registry causing the jack detection pin not to be read properly.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Successfully Synchronizing My Palm TX to My New Hewlett Packard Pavilion dv6663 Notebook (Windows Vista Ultimate)

My Name is Steve, I am a psychotherapist, not a computer expert.
I got my Palm TX to work (synchronize) after severals days of failed attempts.
I just purchased an Hewlett Packard Pavilion Notebook a few days ago (dv6663us). I wanted my palm pilot to synchronize with it but could not get past the 32 bit technology difference of the USB port and the 64 bit technology of Window Vista Ultimate.
I downloaded the new Palm Desktop Beta software. I went to the computer store and purchased a Bluetooth wireless adapter for $43.00. Hewlett Packard makes one that looks like a USB high speed flashdrive, it is about 1 inch long and you just plug it into the USB port (HP bt450). I plugged it in, I did not have to load software, it was automatically detected and installed.
I went to the Control Panel; Network and Internet; Network and Sharing Center. I clicked on the Network and Sharing Discovery button. Then, I went to the; See Also Bluetooth Devices. I had to make sure the palm pilot was set to detect other networks. I had to make sure the computer was set to allow itself to be detected. I told the computer to search for a bluetooth device. I promted me to enter a password. I entered one. Automatically, the palm told me to enter the same bluetooth password. I also went to the hotsync icon on my Palm TX. At the top of the page, I selected local. I defined a bluetooth connection to my computer named STEVERIOS-PC.
When I went to synchronize. It worked. I feel so clever. It took about ten minutes for the first synchronization. After that, the average synchronization duration was just about one minute. I was so proud and relieved!
For me, bluetooth makes more sense than WIFI for synchronization. Here is why. I keep my WIFI at home, take my laptop to work and I need to sychronize in a portable way. The little bluetooth plug in made the most sense. The guy at the computer store discussed his experience with synchronizing a device using WIFI and decided it was not worth the hassle. The bluetooth was better for a mobile device and a mobile computer.
Steve Rios (a.k.a. River Fiasco)
Post relates to: Palm TX

Very helpful experience - thank you for sharing.
This is a good approach for managing HotSync in a 64-bit era.

Problems with HP Pavilion dv600 audio with Windows Vista

Good evening my name is Jose Heriberto and I have a problem with my computer.
I have a Computer HP Pavilion dv6000 to purchase about 2 years ago and have kept the operating system Windows Vista, my problem is that two weeks ago the audio stopped working and do not know how to fix it and look for solutions online but does not solve anything.
Only the audio icon appears as disabled and takes no action
I wonder if some internal error hardware or software, please need help.
thanks
HP Pavilion dv6000

Hello Heriberto_Bta,
I see that you are having problems with the sound on your HP computer. I have a couple of suggestions that may help with this issue.
Here is a link to some troubleshooting steps for no sound issues on Windows Vista. Follow the steps in the link and let me know what happens.
Can you also provide the full model and product number of the computer? Here is a link that shows how to find that information.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Quicktime 7.5 - Black Video and no Audio - Using Windows Vista

Hello,
I tried asking this, but I don't think I was clear enough.
Current Computer - Dell Inspiron, Quad Core, 4gig Ram, < 1yr old.
Running OS - Vista Home
Up until recently Quicktime worked fine, then all of the sudden the video is gone.
The audio is still there however.
What I have done to try to resolve -
1) Reviewed previous topics and tried the following -
a) update Preferences to Safe Mode (That made a white stripe in the black screen)
b) Update preferences to remove Direct 3D video acceleration, nothing changed
2) Reinstall Quicktime 7.5 - No change, still shows BLACK video and will play audio
3) Reinstall Itunes with Quicktime - No change still shows BLACK video and will play audio
Thank you for any help you can provide!

I have found a temporary workaround for this. I can open the indeo 5.1 formatted avi's in another program (either fade to black or virtualdub) and change/convert to another indeo codec called IYUV (as opposed to IV50) and while it renders a much larger avi file, those DO open in Quicktime, and when I export to convert this larger avi into a MOV file, it is about the same file size in the end product as the ones I render from the same 5.1 avi on the other computer. Knowing I can do this as needed saves me having to re-render all 400 or so of my avi's to another codec or lose them.
I STILL think there is a fix out there that is related to somehow telling the registry to recognize the ir50_32.qtx codec the same as I finally did to get Windows MP to play these files, but I haven't figured out how to do that yet.
Progress is supposed to make these files SMALLER with BETTER quality, but all I see so far with these "new improved" codecs is bigger files and no better (or even worse) image/sound quality. I'll change to more "modern" codecs when they show me one that is an actual improvement over the old one based on this criteria. And AVI remains the ONLY file format that can be extensively modified and edited artistically (zoom, crop, add watermarks and color filters and special effects). Apple is shooting themselves in the foot if they make us unable to open our AVIs in the pro version so we can continue to use QT Players on our web pages. I LIKE the mov finished product for both file size and quality, and I am happy to drive new customers to them as long as they let me convert my files in QT Pro. When I can't any longer, I'll convert every single website on all my websites player to Flash.

Webcam not detected in Compact Presario C769CA Notebook - Windows Vista 32-bit

The webcam is not detected in my notebook, it is NOT shown in the Device Manager or in the Imaging devices: I have done a scan for driver updates and the result said that all drivers are up to date, but the webcam is still not detected.
Where can I get the driver for this webcam?
Any help is appreciated to get this webcam working.
Thanks

Hi:
Do you have the cyberlink youcam software installed?
If yes, then I don't know why the webcam isn't working.
Paul

Notebook/ Windows Vista/ CD Recovery/ Error 05-0172-045D

Hello every one. I was trying to re-install the CD recovery. But, while the CD was running a short time, from the screen has came out an error. The error no. was 05-0172-045D. An error has occured . Please press OK to turn off computer.
Thanks very much!
Andy...

Hi Andy,
What is your product number and operating system?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

No audio device installed after windows vista sp2 update

Ok I will try to be as thorough as possible because I want to fix this problem and I hope somebody can help me.
So A few days ago There was an update for my audio driver so I accepted.
But after this update my sound worked but on next use the sound was gone.
So......I used system restore but no help the same thing happened
I went to the hp website to look up my audio driver for my model which was conexant audio 221
After download the driver wouldnt let me install it. I go to check in device manger to install it manually and the sound section is gone literally so i cant reformat or reinstall or anything 0.0
Somebody told me I need to upgrade to windows vista x64 sp2 which was in windows update.
So i tried it and still the same crap
I cant install the sound driver because there is no place in the device manager to install it to
I just get a message saying device installation failed device not found
i dont know what to do
My laptop is a hp dv2700 special edition notebook
Ive had it for a year no problems and this is the first major problem I've had ..............HELP
Past audio driver was conexant : Conexant High-Definition SmartAudio 221 Driver
Ive tried reading through support forums but you have to understand THE SOUND VIDEO GAME CONTROLS SECTION IN DEVICE MANAGER IS GONE
when i go into the programs I find my audio devices which are conexant hd audio and conexant hd audio soft fax modem with smart cp but when I click on them nothing happens

hi, im also exp. the same <text deleted> problem! i also get that error message "quick touch on screen display has stopped working" , lower right corner(volume icon)says"no audio output device is installed", no "video,sound & controllers" on device manager, i had tried reformatting, multible virus\malware scanners, ive tried multible registry cleaners, DL updated drivers, bios, audio(can't install,no audio device),and ive tried all of these conbinations with or without the windows updates, besides the audio prob, the cd/dvd icon's gone frm My comp, cant use the mic, and or webcam, SMART is detecting a hard disk failure now(iminent 2 fail) <text deleted> !,lol... ps HP or Microsoft really needs 2 take this into consideration, im tired of this, i will never buy another HP ever!! or windows!, **bleep** it if i have 2 spent another thousand dollars on a Mac,atleast ill get a much decent,"working" pc, that wontstress the **bleep** out of my mind!
Message Edited by WendyM on 08-09-2009 07:35 PM

No sound witnessed from my HP pavillion dv6 notebook pc, windows vista home premium

their is no sound from my hp pavillion dv6 notebook pc, windows vista home premium, trouble shooted online through microsoft, windows but no issues found, restored to an earlier date. yet it is not working.
core 2 duo cpu, T6500 @2.10 GHz
the message received is:
Windows Media Player encountered a problem while playing the file. For additional assistance, click Web Help.
but web help found no problems with the pc
Kindly help activate the sound system

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Protools 8 compatiblity with Windows Vista and which proper audio interface?

O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

Hi again chamille2010,
Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit. I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve. That was also on the XP Operating System so you might be better off with Vista SP1. I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results. USB would definitely be slower and might be a cause for latency if you run into it.
That's my opinion. Digidesign has a pretty in-depth site for making sure your system will run Pro Tools. I'm sure you've already checked it out but just in case:
http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=23954

Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs. What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc. This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system. This happens whether I trying to Play a disc or burn the disc to the hard drive. The drives work great though as they do play DATA discs all the way through. MP3 discs play fine. It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything. Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help. Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

Hi,
All dimms work individually? Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive? I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk? Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
You have some options to consider once you can stablize your PC for updating the BIOS.
Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
Try a bootable BIOS update process as suggested at this site. -- less safe but doable
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How Do I Downgrade From Windows Vista To XP On A 3000 N100 Series Notebook?

Hello. Here is the problem. I have Windows Vista Pre-loaded on my 3000 N100 Notebook, absolutely dislike this operating system and want to erase and load Windows XP. From reading other forum messages I have learned several things.
1) The install disk On Windows XP Home & Professional will not recognize Sata Hard Drives, when it reaches the point of loading where it looks for the hard drive it "BOMBS OUT" with error messages.
Several options are open .............
1) Log into the BIOS, locate the SATA option, and change to compatibility mode.
2) Have a USB external floppy connected with a Sata Driver on it and when installing Windows XP press the "F6" button when Windows asks for any external drivers you want to load.
Here is the problem with the 3000 N100 Notebook series..........
1)There is "NO SATA OPTION" in the BIOS of the 3000 N100 series notebooks to choose. In this model Lenovo stripped the BIOS down to the bare essentials.......and I Do Mean.... "BARE". The latest BIOS upgrade also has no Sata option. Why they did not offer at least this choice of downgrading to XP is beyond me. LENOVO..... I'm not impressed with your notebook. As usual.... Microsoft has all vendors jumping to their tune..... Nothing but "VISTA" at this point in time. What if you hate it??????
2) I have hunted all over the Lenovo Web Site for a "SATA DRIVER" that would work with a 3000 N100 Notebook, no such critter exists. LENOVO..... Couldn't you have at least offered this???? I'M NOT IMPRESSED.
Has anyone been able to downgrade to Windows XP successfully on a 3000 N100 Series Notebook??? How Did You Do It?? Has Anyone Located A "SATA DRIVER" That Works??? IF So, Please Explain To Me Step-By-Step How I Can Get Rid of Vista and Load XP.
Help........Help.......Help........Help......Help!!!!!!!!!!!
Regards

Hello Himleung. Thank you for answering this message. Where did you find a "Sata Hard Drive Driver" that works?? Perhaps you could pass that along to this message forum in case someone else that has a 3000 N100 (may also work with the N200 series) Notebook wants to downgrade from Vista to Windows XP.
This is what baffles me to no end. The Lenovo web site has every driver you need to load Windows XP on the notebook.....**EXCEPT**..... the Sata HD Driver......**OR**...... the ability in BIOS to change to "compatability mode". Duh!!!..... whats wrong with this story. I have never seen such a weak BIOS as the one in the 3000 N100. If I had known this I probably would have gone to another brand. They should have advertised this notebook as...... "Non-Geek Compatible".
Not knowing exactly how you could forward the driver to me I did the following....... I created a new Web email location that you could use to send the driver as an email attachment. The address is....... [email protected] This address will exist just long enough to obtain the driver..... and then......"Hasta-La-Vista" baby......end of story......as I do not want to be bombarded with ads, trash, or perhaps a virus of some sort..... although.....I'm SURE we have GREAT PEOPLE on this message center.
I'm not familiar with the "NLITE" program you mentioned. Again....perhaps you could mention where I can get it and what I need to do to set the program up to run the driver.
Thanks again, Himleung.
Regards,
Train500

I cant access itunes storesMicrosoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002) Hewlett-Packard Compaq Presario CQ61 Notebook PC iTunes 10.6.0.40 QuickTime not available FairPlay 1.14.34 Apple Application Support 2.1.7 iPod Updater Libra

i cant access to itunes store
here is dignostic report
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Hewlett-Packard Compaq Presario CQ61 Notebook PC
iTunes 10.6.0.40
QuickTime not available
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0025AE8C032360A0
Current user is not an administrator.
The current local date and time is 2012-03-27 13:06:24.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {23DDA231-A7E0-409A-AB19-CEDE8ACE6359}
Description:          speedinfo
IP Address:          182.237.181.108
Subnet Mask:          255.255.255.255
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          202.177.240.125
                    202.177.240.251
Adapter Name:          {948D9871-ADAF-4632-8D0C-538770929B52}
Description:          Atheros AR5007 802.11b/g WiFi Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:
Adapter Name:          {4D499748-069C-4E58-A116-DF748DA3912C}
Description:          Realtek RTL8102E/8103E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address:          192.168.0.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          192.168.0.2
                    192.168.0.4
Active Connection:          speedinfo
Connected:          Yes
Online:                    Yes
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

Windows Vista can't find audio device

I successfuly installed windows vista Beta 2 on my macBookpro, but I don't have sound. windows says No Audio output device is installed. Any suggestions? Help!
MBP 17'' Mac OS X (10.4.6) 2G Ram 100G HD 7200 rpm

How in blazings did you install Vista on your MBP?
Did you use BootCamp? Paralells? Something else? I
heard that it cannot be installed with any of these...
I used bootCamp, but I had a problem after full installation
( windows vista was complaining about a missing file), then I read in some post that if I deleted the 200 MB partion (that shows up at the begining of the vista istallation) I would be able to dual boot, so I did that. Then after booting a second time and using the recovery option on windows vista. It worked.There is a downside to doing that though( boot camp won't be able to make your hard drive one partion any more).If you want to make your hard drive one partion you would have to use the disk utility and reinstall tiger( may be there is some other solution. Don't know)
Some of the Mac drivers that I burnt using boot camp worked but not all of them, but over all I had no problems after installation ( wireless worked from the first time)
I still don't have the eject button working yet( but I don't really need it)
MBP 17'' Mac OS X (10.4.7) 2G Ram 100G HD 7200 rpm

Xi-Fi Audio Notebook Windows Vista 32

Similar Messages

Maybe you are looking for