Xi-Fi Fatality front bay not working on Vi

Hi all,
Can someone please confirm that with the current Vista BETA drivers for the Xi-Fi Fatality soundcard the front panel does not work yet ? (windows Vista Ultimate 32-bit)
I am testing my front headphone's and microphone but I get no sound there, these are also not selectable anywhere in eather the windows sound options or the (currently VERY limited) creative software.
Could I be doing something wrong ? or does realy the ONLY reason I took the Fatality version (the front panel) is not supported yet in any way by the BETA drivers ?
And please for gods sake, dont wait for microsoft to test the bloody drivers, just release them already , ill very happely click the "install anyway" button when windows tells me the drivers where not tested yet
Thank you,
Hans

My front bay works, but my remote doesn't appear to be working. I just bought the X-Fi Fatalty?3 weeks ago and installed it in my new 32-bit Vista Ultimate?system, so I don't have anything to baseline it against. ?Does the remote work with the current Vista drivers?Is it suppose to light up when you push the power button? (I already changed the batteries twice)?thx

Similar Messages

Sb X-fi Fatality front module not working in Winwows7 64 Bit

Hello everyone.
I have a little problem since a couple of days. I have my XBox360 connected to my SB XFi Fatality via optical cable. My sound card is equipped with a front panel where the optical cable is connected to. This configuration worked great when i had WinXp on my computer. Now i had to install W7 64 bit and using the latest driver from Creative and -the same cable configuration - is NOT working at all.
I've noticed 2 stuff:
1) in the SPDIF tab of configuration panel, at the "spedif settings" is missing the Dolby option as it is whown at this link http://support.creative.com/kb/ShowA....aspx?sid=2551
2) In the audio devisces is shown the Digital Audio SPDIF device but indicates that the optical cable is located in the rear panel ... it seems like the driver's doesn't recognize the front panel
Does anyone have some ideas ?
Thanx in Advance
Gatto
Ps: sorry for my english ...

Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks

Iphone 6 plus front camera not working in whatsapp

iphone 6 plus 64GB iOS 8.1 front camera not working in whatsapp

It seems the facetime camera does not work for whatsapp only it works normally.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Help front camera not working on my sons iPod touch 5g

Help front camera not working on my sons iPod touch 5g

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Front camera not working

Hi, I was wondering if anyone else has had the same problem as myself in regards to the front camera not working. All I seem to get is a black screen! I'm not sure if I need to activate it somehow or it's just not working? Thanks Ross

UPDATE: After the intial Factory Data Reset, the camera work fine for one day. Now it's back to the same blank screen in the front camera. Also now my video camera isn't working either. I get an error msg "Recording in progress in another app. Cannot record". I know some folks were having issues with the "OK Google" app. I checked mine and all is unchecked. Spent most of the day talking with Sony and Verizon and neither was able to help me other than Verizon offered a refurbed phone. No thank you, my phone is new. **bleep** Sony? If anyone can help, it would be greatly appreciated.

Front I/O bay not working

I've searched and searched and whatever post I've found similar to mine is unanswered. I think I've tried everything. My front bay for my X-Fi Platinum isn't being detected on Windows 7 x64. I have power to it (red light from optical out), I've tried power to the card it self also. the ribbon from the bay to the card is on secure and I've put the card itself into different PCI slots.. I can plug my headphones into it and it works but it won't mute the speakers (sound coming from headphones and speakers). There's no mic2/line in 2 option under any sound settings so I'm not able to use my mic and under recording devices in Windows everything but Microphone says unavailable. I've tried every driver I can find for Windows 7. Please please please help.

Sounds like the pins aren't lined up or damaged.

IPhone 4 front camera not working!!

My front iPhone 4 camera is not working. I know for sure its and hardware issue. I I take it to an Apple store, what info will they ask me for, once they find out its an hardware issue. Is it going to be a free replacement? I read previous question and they said they got free replacements, I want to know what information does apple ask for?

maybe it will work on another app camera..

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

IPhone 6 Plus front camera not working or with lines and static?

My iPhone 6 Plus front camera is having problems. Sometimes it doesn't work at all and the camera app freezes. Sometimes it works fine for a little while and sometimes it shows multi color static or lines.
I've tried:
Restoring from phone (without restoring backup)
Restoring from iTunes (without restoring backup)
Deleting ispw and re-downloading iOS 8.1.1 then restore
The phone is less than 2 months old. I noticed it acting weird a week or so after I bought it but thought it was just software. At first it wouldn't work when using the camera app but worked fine using facetime. Now it acts up regardless.
Any advice or opinions will be much appreciated.

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

IPod touch 5th gen front camera not working?

I Got this ipod and its been working great! But all of a sudden the front camera isn't working. I rest it and I rest the settings and its still not working. I really don't understand why it's not working when it was working just fine yesterday. I didn't mess with any of the settings at all its just not working and I don't know why. Can someone help me with this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Front Row not working on new MacBook Pro

Hello all,
I cannot get Front Row to work on my new MacBook Pro. I've confirmed that my Apple Remote works using iChat's video preview to see the flashing IR transmitter. I've pressed Cmnd+esc also. I've even tried to double-click on the System >> Library >> CoreServices >> Front Row app to no avail. If someone could help me, I would appreciate it. Many thanks in advance.
2.2 GHz Core2 Duo MacBook Pro Mac OS X (10.4.10) 4 GB RAM

Front Row doesn't usually open if you double-click the application in the CoreServices folder, so that's not unusual. The one troubleshooting step I might try, before calling AppleCare Support since your computer is new, would be to use the Accounts System Preferences to create a new user. Log out and log in as the new user. Can the new user open Front Row with command-esc or the remote? If so, then your original user has a preference file problem. If not, then you may need to re-install Front Row and/or Mac OS X. If your Mac is less than 90 days old, I'd call AppleCare Support and get some help from them to do that (also so they're made aware that a new computer required that in case there's an issue at the factory).
-Doug

NOKIA X3 front buttons not working

Hello. Today my NOKIA x3's front buttons stopped working. They're just not responding no matter how much / hard I push them. But the thing is , that I think its a software's problem. Cos the on/off button works fine when turning on / off the phone ( the red button). But in the menu it does not respond. And the other thing is I've tried to hold the green button and * to restart my phone , and now it turns on , I can't go anywhere cos the front buttons are not working , only the key buttons are and the phone turns off randomly , sometimes with NOKIA logo sometimes without. Is there any way to fix this one myself?

remove the battery for a couple of minutes then try doing a factory restore type in *#7780# security code is 12345
you should also check for a software update.
if nothing helps send the device to a nokia care poit
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

SB X-Fi Titanium Front Panel not working

Hello,
I would like to fully use the Front Panel, because I own a 5. Surround sound system blocking all the backpanel slots. The problem is, that I simply get no sound from the front panel sound output, while the microfone works just fine. Is there some kind of special option to enable it's
The FP is properly plugged into my SB X-Fi Titanium. And it's also not broken, because the FP works perfectly with my onboard soundchip (though it seems to cause crackling in my headphones, so I cannot use it for it).
... Okay now the Mic FP is not working aswell, eventhough it did when I tried it the last time. I set everything I could, like choosing Headphone Mode, enabling FrontPanel everywhere and all that. So why is it still not working?
RIG: Win XP 32bit
Asus P7p55d
Creative SB X-Fi Titanium
normal Stereo Headset
Thanks in advance for any help!

Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks

X-fi I/O drive bay not working (replacement for falty o

i have had the SB X-fi fatalty xtreamgamer card for a few weeks and i went out and got the dri've bay for it affter finding out that it did not work it was sent back to creative and i reci'ved a new one but this one all so is not working there is power to it but the X-fi sound card is not detecting the dri've bay. i have tryed changeing the power cables and done fresh windows and creative x-fi driver installs but the dri've bay still wont work is there anything else i can do to fix it

Hi Serpantine,
You might want to check if there is light coming from the Optical SPDIF Out. This tells you if the dri've is receiving power or not. Customer Support should be able to help you troubleshoot this.

Xi-Fi Fatality front bay not working on Vi

Similar Messages

Maybe you are looking for