XI for CCM 2.0 and EBP 5.0 (SRM 4.0)

Hi All,
We plan to transfer the products from the EBP system to the CCM. There would not be supplier catalogs in our scenario. Is XI required for SRM 4.0 with EBP 5.0 and CCM 2.0.
Does this change if I want to transfer the catalog using the program BBP_CCM_TRANSFER_CATALOG?
Thanks in advance.
Regards,
Robert G.
Message was edited by: Robert Gaylord

Thanks your prompt response Disha.
But I didn't really understand what you have mentioned there. I know, for uploading CSV catalogs XI is not required. XI is required for other formats. But what I was looking for was, is XI is required to transfer the catalog "SRM_EXTRACTED_CTLG" from EBP(5.0) to CCM(2.0)?(I do know that XI is mandatory for SRM 5.0 [EBP 5.5])
For Master Catalog, I am not sure if XI is required. If I am not wrong, it is not required.
Thanks again,
Robert G.

Similar Messages

Problem in maintaining service user for CCM srm_cse

Hello all,
We are implementing SRM 4.0 (EBP 5.5) SSP scenario.
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved as the catalog will be only uploaded in CSV format.
I am doing intial configurations for CAT and CSE.
Now we know that we need to configure a service user in the service of srm_cse.
I am adding the same in SRM client-> trans SICF -> default host -> sap -> bc -> bsp -> ccm -> srm_cse ->change service -> log on procedure- log on data reqd. -> Anonymous log on data - details of client, user, password, language.
since my SRM and CCM are in same client I have put the same client no. and given the user with role "/CCM/CATALOG_SEARCH"
But when I am saving this change in service I am getting an error messaeg that " Changes to Repository or cross-client Customizing are not permitted ".
I am in a same client hence there is no question of cross client customizing .
The other cause left is CHANGES TO REPOSITORY .
Can anybody tell me where I should do config so that this "changes to repository" error message will be be corrected?
Thanks for yr attention and apologies for lengthy matter.
Kind Regards,
Dinesh

Hello Yann,
Thanks a lot for your attention.
But my question was regarding particular error I am getting while maintaining service user in the service "srm_cse" as given in my first message.
Can you throw some light on that pl.?
My client configration as per yr path is present.
Regards,
Dinesh

MM-SUS and EBP-SUS in the same client

Hi experts
I have a doubt about implementationMM-SUS and EBP-SUS in the same client, If I send a PO from MM to SUS and after send a PO from EBP to SUS to the same vendor, the vendor will be able to see 2 POs with just one logon?
As I know when I replicate a vendor from MM to SUS a Business partner is created and when I replicate a the same vendor from EBP to SUS a new Business partner is created and are diferent BP so a user and pass diferent .
Thanks
Nilson

Hi Nilson,
If i understand your scenario, you'll replicate an existing R/3 vendor to EBP. The vendor will be a direct vendor in R/3 while the same would be used as for Indirects in EBP.
Well, when you replicate the R/3 vendor to EBP, the vendor has the R/3 link in the form of Backend Logical systen name in EBP.
So when you replicate the vendor from R/3 or EBP, there will be ideally only one entry for the vendor with references to R/3 and EBP systems.
Hope this clarifies your question.
Cheers,
Akash

ROS (without SUS) and EBP in same client-Transferred BP status?

Friends,
We are working on SRM 7.
The ROS (without SUS) and EBP are implemented on the same SRM client.
In supplier registration process, when the accepted business partner is transferred from ROS to EBP, a supplier is correctly created in EBP client with the same business partner number, but the status of the transferred business partner is not updated from 'ACCEPTED' to 'RELEASED', hence there is risk that user can transfer the business partner again.
As per OSS note 857386, the status released is set automatically by the system when an accepted supplier has been distributed. Also the status is valid only for DISTRIBUTED suppliers, that is, ONLY for suppliers TRANSFERED through OPI.
I understand, if ROS (without SUS) and EBP are deployed on separate clients in same server then when the accepted business partner is transferred from ROS to EBP, system triggers an XI message to update the ROS business partner status to 'RELEASED'. Is my understanding right?
How do we update the transferred business partner status to RELEASED when ROS and EBP are on same client?
Regards,
Sandeep Parab
Edited by: Sandeep Meghashyam Parab on Apr 9, 2010 11:43 AM

Hi Sandeep,
I too have a requirement to implement ROS without SUS in SRM 7.0 PPS. Can you send the config guide or steps to follow both in the ROS side and in the SRM Side. Your kind help will be rewarded and highly appreciated.
with regards,
Freemind

Query regarding auto e-mail notification for ccms

Hi,
I want to configure auto e-mail notifications for ccms alerts.
I have configured ccms monitoring for our landscape on the solution manager.I went through the SAP documentation and it mentions that we have to do the SCOT settings and CCMS_OnAlert_Email_V2 method settings in client 000.But we already have the SCOT config done in 100.
My question is can i complete the rest of the config in 100 or i have to do everything in client 000 only.
Thanks,
Shashank

No Shashank. I dont think this is required. You need not have to redo everything in 000 client.
You only have to create the user in 000 client.
Might be you have to create an RFC connection between your 000 client and the 100 client. I will confirm this to you tomorrow or so. Make sure the user has required authorizations in 000 client.
best regds,
Alagammai.

Is TREX required for CCM 2.0 search?

Hello,
Is TREX a manadatory component for CCM 2.0?
Regards,
Bejoy

Hi,
As already indicated TREX is a required component of the SAP CCM 2.0, even in the scenario where the search functionality would not be used (i.e. in a scenario of just navigating the hierarchial structure and selecting items) the TREX is still a requirement for publishing and indexing of the published data.
Regards,
Jason

External Web Service setting for Supplier Registration ROS to EBP

Dear guys,
We are working on Supplier registration scenario where potential supplier are accepted in ROS client and then transferred to EBP via Suppliers Directory.
For this we have defined External Web Service in both clients ROS and EBP
Can anyone tell me what are the Parameters and setting required to define External Web Service?
We have created New Web Service with following parameters in both the clients ROS and EBP.
Web Service ID                     : ROS
Description                          : Suppliers Directory in ROS Client
Bus. Type of Web Service               : Lost of Vendors
Display Partners Data Again in Vendor List      : X
Vendor Root Node                     : 50000620
Use Error Log                         : X
Use HTTP GET to call Web Service          : <blank>
Codepage of Service                    : <blank>
Technical Type of Service               : <blank>
Logical system                    : SRDCLNT300 (EBP Logical system)
Path for Symbol for Service               : <blank>
Define Standard Call Structure with following Parameters
1        <blank>     http://erpdevsrci.egat.co.th:8010/sap/bc/bsp/sap/ros_prescreen/main.do
          URL
2        HOOK_URL      <blank>     Return URL
Please correct us.
With this setting system does display the Suppliers Directory option in Supplier Screening (Suppliers Directory in ROS Client), however after selecting suppliers directory instead of listing the accepted supplier to transfer to EBP, system displays the same suppliers Prescreen again with no option to transfer accepted supplier to EBP client.
I think I have not set the External Web services setting properly ..
So can anyone send me the correct web service parameter setting?
Regards,
Sandeep parab

Ramki/disha,
I have defined following setting in external web services in EBP client
Web Service ID    : ROS
Description: External Web Service in EBP
Bus Type of a Web service : List of Vendors
Display Partner Data again in Vendor List : X
Vendor Root Node : 50000620 (this is Vensor Root node in EBP client)
Use Error Log : X
Use HTTP GET to call Web Service : <blank>
Codepage of Service: <blank>
Techinical type of Service : <Blank>
Logical system : SRDCLNT310 (this is ROs client from there supplier will be transfered)
Path for symbol for service : <blank>
Standard Call Structure Parameter setting as follows
1. <blank> http://....ros_prescreen/main.do URL
2. sap-client 310 fixed_value
3. sap-username dineshp fixed_value
4. sap-password GAJANAN fixed_value
5. HOOK_URL <blank> Return_URL
6. ~OkCode ADDI fixed_value
7. ~target top fixedvalue
8. ~caller CTLG fixed_value
Also defined ROS external web service as default CAT attribute in the organization setting.
Maintained ROS client in SAP_BBP_STAL_STRAT_PURCHASER role.
Created New Users in ROS as well as EBP and tried the scenario. still it failed to transfer the supplier from Ros to EBP.
Where can we debug the error message?
Regards,
Sandeep

Troubleshooting email alerts for CCMS

Hi,
I'm trying to configure emails for ccms alerts which are generated in our solution manager system.
Our CEN is client 700.
Scot activated and working in both client 000 & 700
Copy made of method CCMS_OnAlert_Email and assigned to autoreactions in RZ21. ( Auto-reaction method ticked in copied method.)
Parameter maitained in autoreaction:
SENDER = JIMOSHEA
RECIPIENT = <email address>
RECIPIENT-typeid = c
SUBJECT_ALERT
Dispatching jobs running and ok.
User contaIns email address in SU01
Restarted sol man system.
I'm wondering if anyone has come across a workflow or even some reports which can be used to tested the different phases of "emailing ccms alerts" so I can see where my config is failing.
Thanks in Advance
Jim

We're using PI 7.11 so it's not using the agent per say but I did a complete restart and this did not help.
The ccms monitor is reporting the system is down so it seems in Sol Man it's not executing the reaction method.
With SAP NetWeaver 7.1, the architecture of the CCMS was significantly
developed, meaning that, among other things, you no longer require a
SAPCCMSR CCMS agent for double-stack systems, even with a central
monitoring system with SAP NetWeaver 7.01. Therefore, do not install
this agent for SAP NetWeaver 7.1 double-stack systems.

Vendor transfer from mm to sus and ebp to sus

Hi,
I have two scenarios.
1. Plan driven procurement
2. mm-sus scenario
For plan driven procurement I have transferred the vendor from r/3 to ebp using bbpgetvd and ebp to sus using xi.
Now vendor can login to sus and do the biding. But in case of mm-sus scenario whether I need to transfer the vendor again using we14? Please suggest how to proceed vendor transfer incase if we have bidding in sus and po display in sus from r/3 not from ebp.
Vendor can be the same for both the scenario.
1. Plan driven procurement - PO will be in EBP
2. mm-sus scenario - po will be there only in R/3
Regards,
Natchiappan.M

Hi,
I dont think vendor replication is needed. Did you try and test the MM-SUS scenario. Is there any error message that you are getting?
Regards
Azad

BPM - Requirement for CCMS Setup?

Hi all,
In the BPM setup guide, it says: "The Computing Center Management System or CCMS Alert Monitor (transaction /nrz20) provides the underlying monitoring infrastructure for Business Process Monitoring."
Is there any further information on exactly what CCMS Setup is required at a minimum in the Solution Manager and in the Monitored system for BPM to function correctly?
I read the technical prerequisites which are described in SAP notes 784752 - "BPMon in SAP Solution Manager - Prerequisites" and 521820 - "Availability of Business Process Monitoring". The first note does not reference CCMS, and the second one only makes reference to it if you want to use "CCMS Monitors" in BPM.
Thanks for any guidance on this,
Regards,
John

Hi JD
To use CCMS monitoring in BPMon, 1st, please implement Note 1293668 as described in Note
521820. This note fix the problem of CCMS monitoring related problem.
>Description of note 521820
>(d) CCMS Monitor
>If you plan link any CCMS monitors from the managed systems into
>Business Process Monitoring implement SAP Note 1293668.
About the procedure, you just need to copy and past MTE from RZ20 of related system.
In more detail, please refer to the document in below.
http://www.service.sap.com/bpm
->Technical information
->->Setup Guide - Interface Monitoring
Page 78 describe the steps on CCMS monitoring setup.
(Originally this description is for one of the monitoring topic for PI area.
Create MTE for PI and by using CCMS monitoring of BPMon, include the MTE to the BPMon.
But the page above exactly describe the step that you need to do for CCMS monitoring.
This apply for your case as well).
Best Regards
Keiji Mishima

I just signed up for Flash CC today and it keeps crashing.

I just signed up for Flash CC today and it keeps crashing.

Ask Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

TREX for CCM

Dear Experts,
We have implemented self service procurement and we are planning to implement CCM within the same client.
As i understand that TREX is mandatory for CCM, I required some clarifications from you.
1) We should maintain seperate client for TREX? or we can use same ccm client?
2) How do we install TREX component in our server or it 's already exist when we install SRM?
3) If I go for different client for TREX then what all are the settings i need to maintain for this>
Thanks for your help
Thanks
Ravi

Hi Ravi,
For CCM yes you are correct TREX is mandatory
For your questions:
1)     Well I assume you have installed TREX somewhere once is installed and you performed the configuration of TREX. TREX will create automatically an RFC in SRM (if you are using CCM in the same client of SRM) or the CCM client this is how you connect to TREX from your CCM client.
2)     You need to install TREX it does not come with your CCM/SRM installation this is a standalone NetWeaver component: you can find the guides here under Standalone Engines-> SAP NEtWeaver Search and Classification TREX
https://websmp106.sap-ag.de/installnw70
You will find two guides single host and multiple host server download the guide of Single Host this is most used for the majority of installations but every installation is different depending on your business requirements.
Multiple Host
https://websmp206.sap-ag.de/~sapidb/011000358700000854982007E/TREX71InstallMultipleHosts.pdf
Single Host guide
https://service.sap.com/~sapidb/011000358700000854952007E/TREX71InstallSingleHost.pdf
3)     TREX is not installed in a client is a standalone engine Is not ABAP component the only thing you need to do after you configure TREX is make sure that the RFC got created (during the configuration of TREX)
Best Regards,
Juan Jose

TREX for CCM implemenetion

Dear Experts,
We have implemented self service procurement and we are planning to implement CCM within the same client.
As i understand that TREX is mandatory for CCM, I required some clarifications from you.
1) We should maintain seperate client for TREX? or we can use same ccm client?
2) How do we install TREX component in our server or it 's already exist when we install SRM?
3) If I go for different client for TREX then what all are the settings i need to maintain for this>
Thanks for your help
Thanks
Ravi

Hi Masa,
Thanks for your reply. I understand from you that we should go for MDM catalogue only right?
Approximately howlong will take us to implement the MDM catalogue *we required only 6 intenral catalogues).
Please let us know approximate time..
Thanks
Ravi

WSDL for CCM 4.2

Dear All!
As i wrote in previous thread..
my company just upgraded CCM from 4.1 to 4.2
AND NOW
the applications i wrote (using VS 2005) may not work because of differences in AXL module in CCM 4.2.
What should i do? If wsdl were not bugged i could update the proxy class and everything should work... but we know that this is not true!!
Any people are working with VS and CCM 4.2? Is there an hacked version of .wsdl for CCM 4.2?
Thank you all

cisco docs state this link can provide the locale installers you're looking for, for CCM 4.2.
http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-locale-40
it is titled callmanager 4.0 but is linked via the callmanager 4.2 installation guide. this should work fine.

Impact of wrong DNS in DHCP scope for CCM

We recently deployed some phones at a new site  which were displaying error messages on the screen
The initial issue was that Option 150 as not set up - resolved-
Phone now seemed to register to CCM (8.6) - IP address located to phone but CCM was showing rejected on the phone page
Phone displayed error  messages "Db config." and "Security"
Db Config looked like it was that no phone was configured/MAC address, phone type etc  - incorrect double checked all ok
Other could be replication between Cluster but again all ok
Security error - Led me to look at the security trust list and delete it and as normally this solves the problem
The actual issue/resolution was incorrect DNS name in the Option 15 of the scope - e.g xxxx.net instead of xxx.com
Why would this lead to the above issues, I thought the main requirement was the 150 for the TFTP
Any thoughts, answers
Many thanks

The issue was that there was an incorrect DNS option 15 given out e.g mycompany.com instead of the correct one of mycompany.com, Option 150 was an IP as normal
I think the issue was as follows
Our CCM`s have host names such XXX-CMSUB1, XXX-CMSUB2 etc instead of IP address- before I joined. If my thinking is correct the phone received its TFTP as normal and was provided with the CM Group but in our case the group contained Host names instead of IP address. The Host names were then added to the Option 15 DNS and so the phones tried to look for CCM`s at XXX-CMSUB1.mycompnaya.net and XXX-CMSUB2.mycompanya.net which failed since DNS has the CCM`s as XXX-CMSUB1.mycompnaya.com and XXX-CMSUB2.mycompanya.com
Does this make sense , if so why the Security and db config issue unless these are standard error messages?

XI for CCM 2.0 and EBP 5.0 (SRM 4.0)

Similar Messages

Maybe you are looking for