XI HA help: SLD inconsistent data, RWB component monitoring show abnornally
Hello guru,
I have installed XI HA on HPUX Service Guard and Oracle 10g. two nodes: xiprd1("CI"), xiprd2(DI). one package: dbPXI(DB, NFS), one pcakge: wdscsPXI(Web Dispatcher, ASCS, SCS),
XI version: 7.0 SP11
I followed note 951910 to configure HA. but SLD show inconsistent entries, I don't know what is the correct entries should show in SLD? it should be two integration servers, two Integration Repository from two nodes, or only one from Web dispatcher?
Thanks a lot if you can send me an email, do a screenshooting about the successfully go-live XI HA SLD screenshooting.
Thanks a lot
Hi Barry Neaves
could you please tell me how many entries in your SLD->exchange infrasturcture.
I don;t know what XI SLD should looks like in HA enviorment, some times it shows me 2 different integration server & domain, some times only one, that's appreciated if you could send me the screen shot, thank you
[email protected]
Qi Zhang
Similar Messages
-
Error in RWB Component Monitoring ... "Domain ???"
Hello Everyone!
A problem suddenly popped up in our SLD. When I navigate to RWB > Component Monitoring... I can no longer click on the "Integration Server" The Domain shows <i>"Domain ???"</i> would anyone know what could be the problem?
Warm regards,
GlennHi Glenn,
Please check your BS for the XI in the SLD and verify you have specified the pipeline url properly:
http://<host>:<port>/sap/xi/engine?type=entry
you can find the http port in SMICM --> GOTO-> SERVICES
In addition to that Verify (in XI) SXMB_ADM --> IE config --> IS URL.
you should have the same url here.
Hope it helps..
Kumar.S
Message was edited by:
Kumar.S
Kumar.S.V -
Adapter Engine link disapperead from RWB - component monitoring screen
Hi.
I restarted PI.
After that, the "adpter engine" line (link) disapperead from the page RWB - component monitoring.
PI is running, it is exchanging data with Ecc and Thirdy Party systems.
How to solve the problem ?
To arrive to "defective" screen:
http://host:5xx00/rwb/index.jsp --> component monitoring --> component with status all --> display
Under domain xx, under integration server, there is no adapter engine line/link
Thanks !HI,
Check in SLD-> content maintenence-> XI adapter framework is registered or not...
If not thn register by performing the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
have a look on this...
PI 7.1: Problem with SLD configuration: Cannot find central Adapter Engine
Regds,
Pinangshuk. -
RWB Component Monitoring - Cache Connectivity Test failure
Hi,
I have done the Cache Connectivity test in RWB-Component monitoring.
For the Integration Server - Integration Engine XYZ.
I am getting error
Result of Self-Test
Can the SLD be reached? ... Details OK
Does the Integration Engine know the business system? ... Details OK
Are roles in SXMS_CONF_ITEMS and SLD consistent? ... Details Error
Is Web service security available? ... Details
The error message os
Details for 'Are roles in SXMS_CONF_ITEMS and SLD consistent?'
Inconsistent roles. System Landscape: Integration Server. SXMSGLOBAL: Application System
How to solve this issue.
Regards
FarhatHi
Use Tcode SXMB_ADM -> integration engine ,Assign proper Client to Integration Server.
look this similar thread
Are roles in SXMS_CONF_ITEMS and SLD consistent? -
RWB - Component Monitoring - Integration Engines = none ???
Hi.
I made a Business System in SLD.
Name: DEV_410
Role: Application System
Related Integration Server: XHD_100 (XI Server)
Technical System: DEV on dev60 (type: Web AS ABAP)
Client: 410 of DEV
Logical System Name: HMXDEV410
But I cant see the business system in RWB - Component Monitoring - Integration Engines. There shoud be 'Proxy Runtime DEV_410' in Integration Engines, I think.
Is there any wrong in SLD or RWB?
Thanks in advance.
sjyoon.Hi
Go to SLD select your business system :DEV_410
And check the following entries for your business system
Role: Application Server
Related Integration Server : (Check if this value correctly configured to your Integration Server client)
If this configuration is correct, this means XIRWBUSER is able to connect to the proxy runtime of application systems(DEV_410). Then there will be no entries displayed under RWB - Component Monitoring - Integration Engines in RWB.( that is how my RWB component monitoring is configured)
Only error entries are displayed under RWB - Component Monitoring - Integration Engines in RWB. Say for example XIRWBUSER is not able to connect to the proxy runtime of application systems(DEV_410). Then you see a entry in RED below your RWB - Component Monitoring - Integration Engines
Satish -
CC problem in RWB Component monitoring
Hi people
i am getting this error in RWB component monitoring
1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors
But sender&receiver CC are STATE is ACTIVE status
Adapter Engine Server is RED mark
All object's r correct
PLS send me to ASAP
Thanks & Regards
shekarHi There,
It saying that one of you CC in error and remaing things are ok.
As you saying everything ok..then check the short log of the error CC ..that text give you an idea..
the error may be occured some time back but it is still showing erro ..but everything works fine...
Regards
Rao -
Error in RWB - Component Monitoring - Adapter Engine
Hi,
After we install an Additional Application Server Instance, we are facing an issue with the Runtime Workbench, specifically with the Adapter Engine status.
On the RWB we're have this error:
Ping Status: Unable to establish connection to
"http://<Additional AS Host>:<Central Instance JAVA Port>/AdapterFramework/rtc"
All the time it's pointing to the Additional AS with the Primary AS Java Port.
We are using a central SLD in PIP system.
We already reviewed, the point 8.12 of the "SAP NetWeaver PI 7.1 Including SAP EHP 1 - Troubleshooting Guide"
Any idea to solve this?
Regards,
GCC PIHi GCC,
Please change in the http://<host>:<j2ee_port>/exchangeProfile this settings:
Exchange Profile
Connections:
- com.sap.aii.connect.directory.name
- com.sap.aii.connect.landscape.name
- com.sap.aii.connect.repository.name
RuntimeWorkbench:
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
Please change the value in the:
Config Tool -> cluster-data -> Global Server -> Configuration ->
Services -> com.sap.aii.af.cpa.svc ->
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
Also see notes: #1113161 - Links in Component Monitoring not working
and #764176 - Error in XI due to inconsistent SLD contents
After that, please restart the j2ee engine.
Regards,
Luis Diego -
Custom SSIS Data Flow Component Not Showing in Toolbox or GAC
Hello - I have created a very simple data flow component for SSIS (Actually, I am following this example: http://www.microsoft.com/downloads/details.aspx?familyid=1C2A7DD2-3EC3-4641-9407-A5A337BEA7D3&displaylang=en).
However, when I register the DLL to the GAC, I am unable to find the assembly in C:\Windows\Assembly - even though the GACUTIL says "Assembly Registered Successfully". Furthermore, after copying the DLL to the PipelineComponents folder for SSIS
(C:\Program Files (x86)\Microsoft SQL Server\100\DTS\PipelineComponents), it does not show in the "Choose Items . . ." dialog box of SSIS.
I am running SQL Server 2008 Dev edition, Visual Studio 2010 with .NET 4.0, and Windows 7 Enterprise 64-bit edition. Any assistance/thoughts would be appreciated.
Thanks!Hi,
I was struggling with exactly the same problem yesterday.. created a component in VS 2010 (.NET 4.0), registered the component using GACUtil with no error, but not being able to find the component in the cache directory nor in the SSIS toolbox...
I spend several hour trying to find out whats going on. Then I tried to run the GACUtil from a dos batch file - and an error appeared saying that I am trying to register assebly .NET 4.0 on a computer that runs 3.5.. Then changed the target framework
in VS 2010 to 3.5, rebuild the project and voila- the component finally appeared in the toolbox list...
this is the batch i used to register assembly:
REM Unregister and re-register the assembly on the GAC
"C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\gacutil" /u ChangeCase
"C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\gacutil" /i "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\ChangeCase.dll"
pause
this batch will show the list of assemblies in the GAC:
"C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\gacutil" /l > gacListing.txt
hope this helps...
Frank -
In RWB----component monitoring --adapter engine-- status
Hi ,
In the Runtime work bench component monitoring if we click on adapter engine we get two tabls
CCMS Status: Last Retry Jan 26, 2011 1:55:15 PM CET Ping and Self-Test Help
Ping Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details
Self-Test Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... DetailsHi Sandeep,
Besides updating the patch level to the latest and ensure the SP are in the same level, the notes I would recommend would be:
#1285224 - Http 404 error in details display for Adapter Engine
#804124 - HTTP communication with XI Adapter Engine fails (this one you have already mentioned)
Hope it helps too
Regards,
Caio -
RWB component monitoring WARNINGS
in component monitoring under integration server the INTEGRATION ENGINE i was diaplayed with some yellow LED saying that some waring..
for this INTEGRATION ENGINE when i checked for status again SELF_TEST STATUS in yellow LED. and the result of SELF TEST showing IS WEB SERVICE SECURITY AVAILABLE? IN YELLOW LED.
WHEN I went for details for IS WEB SERVICE SECURITY AVAILABLE? i was displayed with communication error proxy calls are not permitted on sender or reciever side on IS(client)
what is this error .. how to overcome this..
INTEGRATION ENGINE should be dispalyed in GREEN LED..
plzz help me in this regard..Hi,
Try the below latest config guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/soa/soa-management/exchange-infrastructure/xi-design_configuration/configuration%20guide%20-%20sap%20exchange%20infrastructure%203.0.pdf .
check 12.4 in the document .
but i've observed though you have warning it works fine.
Satish -
How to integrate CCMS with RWB component monitoring
Hi, all.
I am wondering if there is a way to forward errors from the component monitoring and CC monitoring in RWB to CCMS. For example, if a CC is down because somebody changed the CC user or password or disable the CC totally, RWB will show errors in the communication channel monitoring. However, I could not find a way to forward those messages to CCMS so that we can manage it in a centralized way. Any idea?
Thanks,
Jonathan.
Edited by: Jonathan Ma on Nov 4, 2011 9:50 PMHI, look this...
CCMS Heartbeat... RWB
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II
But First, you'll need all of this..
how to coonfigure CCMS Alerts and Alert Categories and Alert Rules
Regards! -
Help with Inconsistent data from NI6211
I'm not getting very far with establishing good data transfer from an NI 6211 and don't seem to be able to pin point the issue or get confidence from DasyLab V10 to be able to look for the problem in another area.
The NI6211 is set for period measurement and automatically uses a low frequency counter with sample on demand. The measurement range is set for 200ms to 1ms
The Dasylab Counter Input task displays the sample on demand and block size of "1".
I have also selected "10" as an output after timeout of 5seconds.
I have set the module to use the Dasylab timebase and have configured all 3 timebases for 1000Hz and (tried higher and lower values) and set block sizes to 1.
Whenever I change the timebase setting I always carry out a synchronise with MAX.
I have been writing to a file using time deducted from data.
With these settings I have the value "10" generated and stored in the file.
When it says "Output after timeout (s) of:", does this mean that their has been no communication for 5seconds even though I can get time stamp information indicating only a few milliseconds have passed?
Does time deducted information mean time deduced information (ie. time stamp from the data)
Is there anything I need to do with A/D window? I have changed the sampling rate in there but it only appears to change the driver setting.
Any help much appreciated.
Thanks
Mark..Additional to information in above post, the operating system is Windows Vista Home Premium with Service Pack 1.
Could this be the underlying issue, Dasylab and Windows Vista are untested?
Thanks -
Hello guys!
During performing PI 7.1 Readiness Check I have to perform a test message under Runtime Workbench\Adapter Engine\Test Message.
After processing i receive following error:
Error while sending message: 403 Forbidden.
Does anybody know the cause?
Many thanks in advance!
JochenHi Sreeni!
Direct hit!
This was the problem! Missing role!
Many thanks to you!
Additional Information for all:
Readiness Check (PDF)
A compilaton of simple and advanced checks for Process Integration 7.1 (PI 7.1)
Page 44
SAP Note 817920 - XI Readiness Check 3.0/7.0, 7.1
Regards,
Jochen -
Error on Component Monitoring On RWB after changing SLD .
Hi,
Guys If my below given questions are not clear to You ... >>>>>>>>>>>>Do ask me for Clearity
My PI 7.0 System was on Local SLD earlier, at that time My Scenarios/ RWB Components were Working Fine.
Now, On Place of Local SLD, We are onto Centerlise SLD on SOLUTION Manager.
after few Changes now my ESR and ID are getting product and Buisness System from Solution manager's SLD.
but ................. >>>>>>>>>>>
>
>>
>>>>
>>>>
On RWB - Component Monitoring - Each Component is coming into Red/Error mark.
So ..
Question : Is RWB is also effected from SLD Changes ???????
r
Facts Found during troubleshooting : -
>
1. In Solution Manager's SLD - Technical System - Exchange Infrastructure - Only one Technical System is Coming for Integration Server.
while
IN Old Local SLD - Technical System - Exchange Infrastructure - 6 different tecnical system was coming ( Integration Server/ RWB / Integration Engine / Adapter Engine ...etc)
Can this be the reason ????????
Please Suggest, What is Missing ?
for Sld Change following steps are performed .. .. . .
1. PI 7.0 like User Creation in Solution manager.
2. Changes in SLDAPICUST in PI System.
3. Changes Done in Excange Profile for SLDNAME.
4. Changes Done in Virtual Manager for SLDNAME.
5. RZ70 on new SLD.
RegardsHi ,
Solution : After changing Local SLD to Domestic SLD , Error was Coming in RWB - Components ...
Solved by :
These are Documents Used for doing Changes in SLD When found Error on RWB.
764176 - Error in XI due to inconsistent SLD contents.
1031321 - Self-Registration of Adapter Engine and RWB fails
Problem has been solved. -
Message processing not visible in RWB Message monitoring
Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.KThere is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".
Maybe you are looking for
-
How can I display labels in the margin on last page
I would like to display a label and a line (for a signature) on the last page of my report at the bottom of the report. This has to be displayed after all the other report details have been displayed and should appear only on the last page. How can I
-
why can i not seem to order more than one print at a time, which of course becomes expensive with shipping, it does not seem to offer me the facility to choose again? either order or cancel!
-
ITunes 8 no longer playing certain songs
Hello, I recently updated my iTunes to v8. Since doing that I find that I cannot play certain tracks in my library that I could before. Some have been downloaded while others were added from a CD. I tried changing the ID tag but that didn't work. I'v
-
Manual data corrections in data-Warehouse/OLAP
Hi to all, is it somewhere in essbase(hyperion) possible Manual data corrections in data-Warehouse/OLAP? Thank you G.
-
I accidentally remove Quicktime
i accidentally remove Quicktime and now my itunes wont open. i have just enter a hugh list to my library and i did not make a backup yet. is there a way too keep itunes library. i try to reinstall quicktime again but with no succes. it took me days t