XI IDOC missing segment definition in type E1LFM1M
Hi experts,
we have recently upgraded our ERP system to NW 702 EH5. As aresult a new segment definition was added to our segment type E1LFM1M ( segment def. E2LFM1M007). The problem we are havign is that our XI system is still running on NW700 and it doesnt have this segment defintion. Since the upgrade we are getting an error in transaction RFC complaining about the new segment definition E2LFM1M007 everytime we try to send a vendor from ERP to SUS using BD14. Is there a way we can deactivate the new segment definition E2LFM1M007 in segment type E1LFM1M?
Thanks,
Abdul.
Hi Abdul,
Actually it does not matter what are your systems' versions, PI can always handle an IDoc properly. All you need to do is perform the following steps in your PI system:
1. Log on to ABAP stack, go to t-code idx2, find your ECC system and that particular IDoc (I believe this will be CREMAS) and delete its metadata.
2. Log on to Enterprise Services Repository, find your SWCV where the IDoc definition was loaded, and load it again from your ECC system, then activate the change.
3. If necessary, also adjust the message mapping to use/not use the new segment. Activate your changes.
Once you have these steps completed, you are ready to retest your scenario and say goodbye to the error.
Hope this helps,
Grzegorz
Similar Messages
-
IDoc - Get Segment Definition or Version in Code
I'm working on the ABAP-PI Port, created a FM based on FM OWN_FUNCTION now.
In my FM, there is a call to a function
CALL FUNCTION 'EDI_SEGMENTS_GET_ALL'
that retrieves all the segment data for a particular IDoc number.
However, it returns only the segment name EDIDD-SEGNAM and not the segment definition.
Example:
Value returned: "E1EDKA1" ( EDIDD-SEGNAM , 27 char long field)
I'm actually looking for the Segment Definition that goes up to 30 characters long.
Value I need to be returned: "E2EDKA1001" - has the extra 3 digits at the end that represents the Version.
If you go to WEDI, Development > IDoc Segments, You can see that the Segment definitions belong to a data type EDISEGDEF (30 characters long).
Does anyone know how I can get this programmatically?
The IDoc file downloaded by the FILE port stores the 30 char Segment Definition in the file
Using the ABAP-PI it only returns the segment name (27 char)Hi all,
Thanks for your replies.
EDISDEF might be useful, but I'm not sure how to use it at the moment.
I am supplied in the code a structure of type EDIDC, which has the following values (not all are listed)
MANDT C 3 308
DOCNUM N 16 0000000000002050
DOCREL C 4 640
STATUS C 2 03
DOCTYP C 8
DIRECT C 1 1
RCVPOR C 10 SUBSYSABAP
RCVPRT C 2 B
The above represnets a particular IDoc being processed (see DOCNUM and DOCREL)
The default code then uses a FM to get the segment data based on the DOCNUM.
CALL FUNCTION 'EDI_SEGMENTS_GET_ALL'
EXPORTING
DOCUMENT_NUMBER = I_EDIDC-DOCNUM
TABLES
IDOC_CONTAINERS = I_EDIDD
EXCEPTIONS
DOCUMENT_NUMBER_INVALID = 1
END_OF_DOCUMENT = 2
OTHERS = 3.
Does anyone know of any FM that returns a EDID4 (has 30 char segment version) structure instead of a EDIDD structure (27 char seg def)?
And the value EDIDC-DOCREL (SAP Release for IDoc) e.g.
<b>640</b>
does not match up with values available in EDISDEF-RELEASED (IDoc development: Release of segment definition), e.g.
<b>30F
40A
45A
</b>
How can I find if the segment definitions are
E2EDKA1 or
E2EDKA1001 or
E2EDKA1002 or
E2EDKA1003 -
Hi,
Some of my outbound IDOC's are missing a particular field in the Segment.....
This is probably because that Segment field don't have any value and hence missing from IDOC.
What can be the possible approach for Solving this probelm?Hi Abhishek,
Can you please get the solution for such issue?
I didnt aware of Enhancement Spot...
Looking for your reply..
Regards,
Raghu
Edited by: Raghu Raman on Jan 5, 2009 1:27 PM -
IDOCS: Segment Definition and Segment Type
Hi Gurus,
We are working on IDOCs and trying to send a Location Master IDOCs to Third party system.
1. In the IDOC print preview we are in a position to see the IDOC segment type Ex: E1TPLOC but customer is asking for Segment definition E2TPLOC.
When we go through the documentation:
u2022 Segment Type consists of Segment definition with Version and Release.
u2022 Segment Definition will contain the Field names
u2022 E1TPLOC, E1TPDLH, E1KNVAM, E1TPTRM & E1TPSHH Segment types with concerned Segment definitions are
E2TPLOC,E2TPDLH, E2KNVAM
How to see the Segment definition types?Hi,
You can see the documentation in the transaction WE60 by giving the IDOC Basic type and extension if you have any.
E1 and E2 are the same, when you see the definition of the segment the naming convention will be E2 and when populating the data it will be E1.
I believe he is asking the segment definition alone, you go to WE60 transaction and give the inputs and click the parser button and that will give you the definition of the idoc and which you can share it with your partner.
Thanks,
Mahesh. -
IDOC Segment Definition received instead of Segment type
Hello Folks,
When i send a Z Idoc Segment from A to B System, It is successfull from A System, but in B System sometimes its erroringout because in the inbound idoc Segment Definition is coming instead of Segment type.
For Example
From A System I have sent Z1P0002 segment
B System I have received Z2P0002000(Which is the segment definition for Segment type Z1P0002)
Any inputs to above problem?Hi,
The problem may be due to system B using a older release version of the IDoc. In those scenarios, even though your IDoc type is recognized, it may not be possible for the reciever to determine the right segment version of the reciever.
There are options in the WE20 partner profile configuration, Field Segment release in IDoc type and Segment Appl. rel. which enable the partner system preventing from erroring out.
BR/Yogesh
Edited by: Yogesh Surender on Jun 1, 2009 12:34 PM -
Segment definition in an IDOC type
Hi,
What does Maximum number and Minimum number stand for in an segment definition within an IDOC type? I think there are two options.
1. the occurence number of the segment type in an IDOC type defintion
2. the occurence number of the segment data of a special IDOC
1 or 2. Please suggest ... It will better if there is any example for me to understand it. Thanks.
RegardsOption 2 is correct from my observation.
-
IDOC - add new field in in existing segment definition
Hi,
For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
Thanks in advance.
RajeevVarma,
I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
Thanks
Rajeev -
Flat File IDOC - ECC, segment defn x in IDoc type y CIM type do not exist
Hi,
I'm working on idoc flat file > sap scenario. Everything seems to be working up until the point where I get an error message:
EDISDEF: Port EDIPORT segment defn E2FINBU000 in IDoc type FIDCCP01 CIM type do not exist
I've loaded the meta data, and the file structure is fine. I believe the issue is related to PI not having the idoc I'm interested in listed in WE30. How do I reference the standard IDOC type FIDCCP01? Ideas I've had are around SWCV or transport from another system, the first I'm not sure which SWCV, the later seems a bit of a bodge and I dont like the idea.
Thanks
James.Hmm.. some light for the situation. Seems that the segments imported are:
E1FINBU E2FINBU 31I
E1FINBU E2FINBU001 40A
E1FINBU E2FINBU002 40B
E1FINBU E2FINBU003 45A
E1FINBU E2FINBU004 45B
E1FINBU E2FINBU005 46A
E1FINBU E2FINBU006 46C
Which indeed does not have E2FINBU000, which the IDOC is most definitely trying to pass. I can only guess that the middleware producting this IDOC is flawed, and that standard SAP ALE will accept this as E2FINBU (It works into another SAP system without XI).
Guess I've answered my own question, but feel free to offer light for points
Thanks,
James. -
Add IT0006 custom fields for segment definition E1P0006 basic type HRMD_A06
Hello! I am am trying to determine how to bring in our custom fields from IT0006 into our IDOC's for message type HRMD_A basic type HRMD_A06 without performing a custom SAP modification. I was able to create a new segement definition called Z1P0006 and replace the SAP standard E1P0006 IDOC segment defintion in table T777D for infotyp 0006 to Z1P0006. However, I receive a message that I must not maintain this IDOC segment manually and instead you must maintain infotypes and their individual elements by using the transactions for processing infotypes: PPCI or PM01 (Infotype copy transaction for personnel administration).
Does anyone know of a way to bring in the new custom infotype fields from i.e. reimport the table structure for IT0006 into the segment definition without a custom SAP modificaiton? I would really appreciate any help on this topic!
Thanks!
Hollyunfortunately, the standard do not provide the infotypes for the HR-TM (Time Management), that
are between the structures i must send in the other system sap.
Ok, I have never delt with Time data in HRMD_A. Probably this is the case then
Ok,now i've checked the filter in BD64 and the tables BDCP2, CDHDR and CDPOS but it seems
all correct!!
By checking Filters I mean that confirm if you have added Time Infotypes there (just
making sure). If data is appearing in BDCP2 that means there is no problem in Change
pointer creation, Just ruling out possibility.
Try with an user exit it's a good idea, but why in the PFAL the idoc (with the custom segments)
is created without problems and in the BD21 no??? This is very strange
1) Well BD21 uses the Function module (TBDME for HRMD_A) which read change pointers and
create IDOCs. So now if you have extended Segment you have to add your population code
here somewhere.
2) PFAL is Push program, my assimption here is you have wriiten some piece of code to
populate Additinal segments data here? Otherwise IDOC will not be populated
automatically.
Let me know what you think. -
Hi all,
I have extended the the standard IDOC MATMAS05 classification view with structure as below-
E1MARAM Master material general data (MARA)--->Mandatory segment
Z1KLART KLART --->Extended chaild to E1MARAM
Z1CLASS segment for class --->Extended chaild to Z1KLART
Z1CHARACTERISTIC CHARACTERISTIC --->Extended chaild to Z1KLART
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT) --->Mandatory segment(Child to
E1MARAM )
I am getting an error in IDOC fro material master as:EDI: Syntax error in IDoc (mandatory segment missing ).
Diagnosys By system is :*The segment E1MAKTM has the attribute 'Mandatory' in the syntax description of the basic type MATMAS05 (customer enhancement ZMATMAS05). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.*
Please help to resolve the issue.
Thank you.
Edited by: sanu debu on Apr 30, 2009 11:25 AM
Edited by: sanu debu on Apr 30, 2009 11:31 AMHi,
You cannot add an segment in the middle of other segments.
YOu have to add any segment at the last.
If you want to add a segment as the child of another segment, it should be added after the last child of the parent segment.
In you case, you have to add your segment after the E1CUCFG segment.(NOt under that segement)
Regards,
Ravi Kanth Talagana -
Segment Definition Name in IDOC
Hi Gurus,
I am new to IDOCs.
I need to create a new segment type in WE31.Its name should be say Z1TEST and I want to have the segment definition name to say Z2TEST.Currently the segment definition name is blank and disabled and when I save the segment type, the segment definition name, by default , comes as Z1TEST000(as per my example).
Can u please suggest any ways of putting my own naming in the segment definition.
Thanx in advance.hi,
Defining Segments
Use
This is where you define segments so that you can assign them.
Procedure
From the Commission System screen, choose Master Data -> Segment Assignment -> Segments -> Maintain.
Choose a segment type and an effective validity date.
Choose Save.
Result
You have created a representation of the commission calculation of relevant data from the external policy management system. You can now assign the segments.
A data segment contains a collection of fields from SAP tables. A data segment may hold master data or data from an application document. A segment is a collection of all the records of one type. A segment may contain data from a single SAP database table, or it may combine related data from multiple tables.
A checksum is basically a one-way hash of whatever data arguments you supply.
Regards, -
How to cancel the release of the current segment definition-WE31-IDOC?
Hi Experts,
Am trying to add a new field to a existing custom segment type/defination. This segment type is already using in the system.
So, went to WE31 and pressed the PENCIL button for changing/adding my new field, but am geting the below message,
(1)pls let me know that does it mean CANCEL the release (Menu>Edit>Cancel Release)? if so, Can I go ahead and use this CANCEL the release? do I need to take any pre-requisites as this segment is already relased?
(2)But, you know there is another option saying 'ADD VERSION-Shift+F5', if I choose this option, its also taking me to a screen where in I can add new fields so which is correct option for me is it either (1) or (2)?
Current segment definition Z_segment_defination can no longer be changed
Message no. EA666
Diagnosis
The current segment definition Z_segment_defination of segment type Zsegment_type is already released.
System Response
The segment definition cannot be changed.
Procedure
You can either add a new segment definition or cancel the release of the current segment definition.
Thank youso i tried to CANCEL the release by goiong menu pathEdit-->Cancel the release, but am getting the below error, How to fix it to add my new field?
Error while resetting release of segment
Thank you -
Reg: Missing segment E1EDP01 in outgoing IDOC
hello guys,
I have got an issue in IDOC.
The idoc has a missing segment E1EDP01.
Flow is SAP to EAI to VENDOR.
I wnt to know why idoc is triggered without this segment E1EDP01.How is this IDOC created? own programm?
-
EDI: Syntax error in IDoc (mandatory segment missing)
HI all,
Error Message - EDI: Syntax error in IDoc (mandatory segment missing)
Status ID - E0
Message No - 072
Status of the IDoc - 26
Please help me how to solve this issue?
Thanks,
SriniHi,
This error normally comes up when the sequence of segments has been disturbed.
For successfully posting an IDOC you need to maintain the sequence of the segments as in WE30.
You can also check which segments are mandatory in WE30 by clicking on the segment name and the pop up that comes.
Thanks,
Manish -
Schema to be handled does not contain a definition of type Order
Hi,
I am getting the error 'Schema to be handled does not contain a definition of type Order'
when i tried to import an XSD to create a data type in Integration repository. I checked my XML with the XML SPY and it is vallid.
Am i missing something? How can i import an XSD to create a datatype.
Regards,
SharadhaHi,
Make sure the datatype name and the main element name in the external xsd is same.
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="..." targetNamespace="....">
<xsd:complexType name="Activate">
Also check this link same problem
Schema to be handled does not contain a definition of type Activate
Error: Schema to be handled does not contain a defintion of type
Re: Calling Idoc structure in creating Data Type
Re: How to import XSD?
Please reward points if it helps
Thanks
Virkanth
Maybe you are looking for
-
I use Photoshop CS4, I do not think this problem is related to PS... I am not exactly sure what happened. I created a folder on desktop, think I changed name of it. Now it is not on desktop. I know the exact name of the folder and have tried doing a
-
Profit Center not updated for mov type 511
When we are doing the goods receipt through transaction MIGO with mov type 511 (Receipt of delivery without charge) as 2nd line item along with mov. Type 101 as first line item, profit center document is not getting updated for 2nd line item (GLPCA-M
-
How do you open a .7Z file.
Today I purchased a full download version of Photoshop Elements 10. There were two files to download and install. One file was a .exe file and was no problem. The other file is a .7Z file which I cannot figure out how to open so I can install it. Any
-
What is the best way to create a professional portfolio?
I am looking at making a Professional portfolio for my tiling business in the UK, I've got the idea that ibooks is the best app for this?
-
Oracle BR0973W Database operation alert warning
Hello experts, I hope you can help me with the following: In transaction DB13 the checkdb job reports the following errors: BR0973W Database operation alert - level: WARNING, operation: sdvgirhz.dbp, time: 2007-05-14 15.46.27, condition: Last 'dbp' o