XI idoc to idoc scenerio
Hi
my problem is that i passed data from Source R3 sytem to XI.I am receiving XML message in XI.But XML massege is not passed to target R3 System.
Suoure System Distribution Model Details:
Sender:TESTBSYS2 (r3source)
Receiver:IQXCLNT600 (xi)
in target System:i have creted 2 logical system TESTBSYS2 and IQXCLNT600
now u can find from where i m doing misstake?
one thing is also confuse me:
in IR i have created 2 business system 1:TESTBSYS1 and 2:TESTBSYS2
TESTBSYS2 is sender so i have not make Communication Channel
TESTBSYS1 is sender so i have make CC using Idoc adapter and define port and RFC destination
still idoc is not pass from XI to target R3.
Please help
Hi Mohit
If it is in error then how can you expect that this will be posted to R3.
XI basic thing is to check the messge in moni for error.
Now solve that error and then trigger the idoc again to check.
If you dont know how to solve that particular error then post it we all will try to resolve it.
Now seen ur error----
Go to Receiver Determination and check have you correctly defined there who is the receiver.
Edit the Receiver Determination and activate it again, sometimes it also solve the problem.
Regards
Dheeraj Kumar
Edited by: Dheeraj Kumar on May 11, 2010 3:29 PM
Similar Messages
-
How to send status message in SOAP to IDOC scenerio without BPM
Hi,
I have a SOAP to IDOC scenerio in which we require to send the status message back to user from XI that " IDOC has been sent successfully to SAP system"
We do not want to use BPM bacause of performance issues.
Can you please help me how to achieve this synchronous response without BPM.
Note: We require the status message from XI that the IDOC has been successfully posted to WESAP systemIdoc only support async behaviour. U can't get the Idoc response as per ur requirement without BPM.
Better to go for abap proxy or RFC.
Or u may get the ack till XI.
Regards,
Prateek -
hi
i am working on idoc to idoc scenerio... i configured everything in R/3 system...the IDoc is successfully send to Xi system...
in XI system, i checked in IDX5 tx... its showing the Inbound IDoc is received in XI system...but if i go to SXMB_MONI tx... the message is with error..
the flag set is error flag and ACK.Status - ACK contains system error...
if i go to detail view of message... the error is ..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_NUMBER</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Check the interval '01' of number range object 'EDIDOC'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Identification
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
wat is the solution to rectify this error????????//
wat is the use of IDX5 tx????????????
urgent plz reply quickly..Hello,
1)
if your IDoc (inbound and outbound) is the same you don't need a mapping in your scenario. In this case try without mapping.
2)
check your receiver determination in sxi_cache
3)
have a look at this thread:
error in processing the idoc
Regards
Patrick -
EDI fileTo IDOC scenerio - IDOC number issue
Hi All,
My scenerio is EDI file to IDOC, now the problem is when i restart the error message in sxmb_moni , it got successfully processed but i m not able to see the Idoc numbers when i click on "Idoc" tab in sxmb_moni. It says "No Message Selected".
Although I can see the idoc numbers using T-code idx5 (corresponding to those restarted Msg IDs) in PI system.
but at the Reciver SAP system thse idoc numbers could not be found , rather diffrent idoc numbers can be seen (which contains the same data as expected).
Please help finding out the problem.
Thanks in Advance
Jyoti>
Jyoti Acharya wrote:
> Hi All,
> My scenerio is EDI file to IDOC, now the problem is when i restart the error message in sxmb_moni , it got successfully processed but i m not able to see the Idoc numbers when i click on "Idoc" tab in sxmb_moni. It says "No Message Selected".
>
Jyoti,
This can happen. Idoc numbers can be different, check with the partner profile and message type and compare the idoc values.
Regards,
Pavan -
Hi every one,
I am new to ALE/IDOC can any one send me one or two complete scenerio and faqs on ale/idoc. this is my mail id [email protected]
Regards,
VenkatThere is no standard way to send ALE IDOC back to SAP R3 if mapping fails in middleware.
But this can be handled through BPM.I am not sure if you are from XI background or R3 background
The BPM design looks like this,
Receive( IDOCs from R3 ) -
> Block step ( Inside block Mapping-> If mapping success>.Send to Target application
If mapping Fails(System Error)>Mapping (MAP ALE IDOC with respective details)->Send IDOC to R3 system.
Hope thsi helps -
File to IDOC scenerio (Please help)
Hi Friends,
Please provide me a sample document with screen shots for the below mentioned scenerio.
File--> XI--
IDOC.
This would be a great help. Seeking the early responses.
Please note ID also, if wish to send it on this.
sonisapabapATyahooDOTcoDOTinrefer:
Step by Step Guide - File to IDOC Scenario
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
The specified item was not found.
File to Multiple IDocs (XSLT Mapping)
Edited by: preethi Prabhu RadhaKrishnan on Sep 4, 2008 3:19 PM -
Error in file to idoc scenerio
hi
in file to idoc scenario
i got error in sxmb_moni
in status it is showing recording,
in Q.status it is showing stop symbol.
waiting for suggestions.Hi Sandeep,
Have a look at queue problms here
/people/prashanth.azharuddin/blog/2006/11/24/some-errors-in-an-xi-production-environment
Some additional help
Q.Status is "Queue stopped"
queue status is stopped
Regards,
Prateek -
Hi ,
i have created new tecnical system (web as abap) for receiver R3 system.
When i am sending idoc ,It shows error in XI system:
Receiver service cannot be converted into an ALE
logical system
please helpS0004413518 wrote:>
> Yes Sarvesh,
> you are right .Can u give me solution.
See page no 8 point no 9..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098?quicklink=index&overridelayout=true -
Business system for idoc reciver communication channel.
hi gurus,
iam doing one file to idoc scenerio.
for defining reciver idoc adapter ,which type of businees system i required that is configured in SLD.
pls guide me .
warm regards.Hi
You can use th Buiness system as a receiver for IDOC.
Making sure
1. the LS of the system(R/3) is same in the SLD and it is also reflecting in the adapter specific attributes in the ID.
2. Use the same LS name for the BS pointng to FIle in the SLD.
Complete the IDOC configuration from XI
1. Create the RFC dest from XI to ECC
2. Create the Trfc port and call this RFC dest created..
3. Use this Trfc port in the IDOC receiver
On ECC:
Make sure the Partner Profiles is created properly.
it is suggested to use always the business systems when you deal with IDOC and Proxies.
Edited by: Nisar Khan on Feb 27, 2008 1:31 PM -
Hi ,
i am creating File to Idoc scenerio in which our XML message is in error.
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>MSGGUID 296FE65735374C062450FE8D73D37350: Tag found instead of tag IDOC BEGIN=</SAP:P1>
please suggest what can i do.Hi,
Go to IDX1
find the port to your R3
find the rfc destination name that the port is using
go to SM59 and find this RFC destination
open it and click CTRL+F4
(authorization test)
do the same procedure for your RFC destination
in the IDOC receiver adapter - if you sue any other
You can also go through the foolowing links:
"Could not determine code page" inbound side error
XI IDOC Error...
Regards,
Sachi -
Unable to interpret IDoc interface ZSHIPDEL_packageRD
Hi,
I am doing a file-xi-idoc scenerio.
I've exported my custom idoc as an xsd and modified the schema to allow for multiple idocs to be generated for each file - as per note 814393.
However I get the following error message at runtime (Call Adapter):
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>ZSHIPDEL_packageRD</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface ZSHIPDEL_packageRD</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Has anyone else experienced this error?
Regards
leenorI have a scenario exactly like the above one.
My file structure is like
TransactionDetailList
TransactionDetail (1:N)
Transaction_Type (0:1)
Transaction_Date (0:1)
Add_Revise_Cancel_USER_ID (0:1)
Add_Revise_Cancel_Date_Time (0:1)
My IDOC has the below structure,
ZIDOC_BDS_DIVERSION
IDOC
ZSEGL_DIVERSION_HEADER
SEGMENT
NOMNR
NOMIT
EVENT_DATE
ZSEGL_ DIVERSION_ITEM
SEGMENT
WHO_PAYS_DIVERSI
LOCID
DEST_CITY
so i have to generate multiple idocs in the target side.
I have created external defination based on my IDOC.Defined mapping between File and the external defination crerated from the IDOC. also defiined interface mapping between file and external defination.
In the Integration Directory ->Interface Defination, I have used the actual Idoc as Inbound interface for which there is no mapping as we have not defined anything for this. This is exactly what you have defined above.
I am getting the following errors like,
"Error: MSGGUID A5EE4A305B4111DABFBE0002551F08EE: Tag TransactionDetailList found instead of tag IDOC BEGIN="
Please let me know if I am missing some steps while configuring or I have to do something else.
Thanks & Regards,
Mukesh -
Idoc Occurance help rquired.
Hi Experts
mine is a file to Idoc scenerio. The file I have has several equipmnet numbers . The occurance of the equipment in the source structure is 0:1 .
The target is an idoc structure, Idoc occurance is 0: 999999 and equipment occurance is 0.1 .
My requirement is , as different equipment numbers acn come in the source information, hw do i make , a single IDOC , at the target for each new equipment in the source???
Is my question clear, please help me out with this, and revrt back if you have any queries!!
Regards,
Arnab.Hi Arnab,
as per my understanding, you have different equipment number under single equiment which is 0.1, and you need different IDOCs for different Equipment number, if this is the case, then you can map ur equipment number to the target IDOC using the node function "SPLITBYVALUE", and the property for this node function you have to choose "VALUECHANGE".
equipment no -
> SPLITBYVALUE -
> IDOC
(ValueChange)
which will create different IDOCs for each new equipment number.(If my assumption is not wrong)....
Regards
Venkat -
XI and R/3 System connection settings for IDOC to File scenerio.
Hi SAP champs,
I am working on a IDOC to File XI scenerio. But I am confused while configuring connection settings at XI system and R/3 system. I am finding problem in transaction IDX2 to maintain the IDOC metadata. Please let me know the complete step by step system cofigurations in XI and R/3 systems for the scenerio. Thanks in advance..
Regards
Sanjeev.Hi Sanjeev,
We upload Medata in IDX2 to just reduce runtime effort and hence to improve the performance. However it is not a mandetory step to be performed for R/3 TO XI scenario.
You are confused just because here you dont find any F4 help to select the metadata and the PORT.
Thanks
Sunil Singh -
Complete file not displayed in File server(Idoc - XI File scenerio)
Hi,
Am working on Idoc-XI-File scenerio.
The target file is getting generated properly and complete xml n Adapter Monitoring in RWB.
But in the file server(in the directory)only part of the xml is displayed.The size of the file is 82KB.
Is there any configuration need to see the complete file in File Server.Hi Amit,
This could be due to Network. How far is the file server from XI server?
I suggest putting the file in to local machine or in the same network and check whether it is OK.
- Pinkle -
Hi,
I have done a XI scenerio ( SAP idoc -> Xi-> file) and it is working perfectly in XID. I have observed a strange thing ...
In configuration scenerio i have defined sender business system as BS_ECC_400_001. But this is not there in SLD. And the whole scenerio is working....Can anyone please tell me why is this so ???
FYI, the business system was there in the object tab, i had not created it.
Regards
NiladriHello,
Check whether SLD is pointing to development environment, it might be pointing to other server. Same thing happend in my project. SLD was pointing to production environment.
Click on SLD link from your home page.
Regards,
Sreenvias.
Maybe you are looking for
-
Get file name and path from adf inputFile
Hi, I use adf's inputFile component. I need to get the file name and filePath. Does anyone knows how to do that? Thanks in advance
-
UseOneAsMany function: Queues Issues
Hi experts, I'm facing an issue while trying to use the function useOneAsMany In my requirement i have to map in different cases a header value as many times per each item it has, 1- mapping the document number (header value) in every item position o
-
Need help installing Adobe Reader on my Mac
I am trying to download Adobe Reader XI onto my mac running OS X Yosemite 10.10.2 through Safari. Every time I download it gets almost through the installation and then gives me the error "Installer: Installing at base path/installer: The install f
-
IPhone will not restore from back up after updating to iOS 6.1.3
I tried to update to iOS 6.1.3 last night and my iPhone crashed, putting it into recovery mode. Then when I tried to restore from my last back up I got this I have tried to restore from three different back ups I have and keep getting the same error.
-
Is there a way to download adobe flash player on a android tablet?
Is there anyway to download adobe flash player on an android tablet?