XI INSTALLATION and POSTINSTALLATION
Hi All..
Can any one send me XI Installation guide and post installation guide.
thanking you
Vamsi.D
Hi, below info will Help you for instalation..
The installation of SAP XI,
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
Installation Master DVD
Installation Export
Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
XI installation
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
In simple words regarding learning XI, there is an abundance of information on SDN and help.sap.com
. So I think it will be better for you to search information there rather than me just providing you links
.which will just go on and on and on
.so I felt it is better for you to go and search so that not only you get information on SAP XI but also explore SDN in its real sense.
Regd's
Raj
Similar Messages
-
Problem with installation and activation
Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>> -
Installation and performance wonderful!
Just completed installation and testing of Aperture 3. 20K images, mostly RAW from Canon 40D and 5DM2 (11 to 23 MB RAW files), around 300GB.
Ran Consistency Check and then Rebuild on Aperture 2 libraries before starting move to Aperture 3.
Backed up Aperture 2 Libraries on several hard drives (belt and suspenders).
Installed from Ap 3 disk.
Did software updates re slideshows and new RAW update.
Turned off Faces (can run this later).
Did not reprocess files, just the update. I will reprocess as needed, when I want to use new tools on old files.
Update on both Mac Pro (2006, 2.66GHZ, 7GB ram) and MacBook Pro (2008, 2.5 GHZ, 4 GB ram). No other application slowed down at all during update. Update took about two hours on each machine.
Library and adjustments are very snappy.
Printing went exceedingly well, after re-entering my presets.
Image Browser shows Aperture library.
Not a single problem so far. I've spent almost a week reading the posts here and I've seen all the problems some people have had.
In my view, a very, very impressive new version.I know it really probably will not help but I submitted a bug report.
"17-Feb-2010 12:16 PM Brian Hursey:
Summary:
Major issue with Aperture 3 when converting A2 library's and projects to A3.
Steps to Reproduce:
Senerio 1. Open an existing aperture library. It tells you you will need to convert the library conversion only gets to about 5%.
Senerio 2. Importing and not converting an existing A2 library into a A3 library.
Senerio 3. Reprocessing masters on a imported A2 project.
Expected Results:
Conversion, importing processing needs to keep from locking up the system and making it unusable.
Actual Results:
Uses all systems resources and creates a 43+ gig swap file. Used 100% of both cores of my 2.0 ghz 2009 mac mini, and used all of the ram.
Regression:
System: Spring 2009 Mac mini. 2.0 ghz core duo, 2 gigs of DDR3 ram, Snow Leopard 10.6.2 , Aperture 3.
Notes:
Possible work a rounds 32bit mode will test tonight. " -
BO XI 3.1 installation and Upgrade activity Steps
Hi Experts,
Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
j2re1.4.2_04
j2re1.4.2_16
jre1.5.0_14
Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to
install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
Regards,
SridharanHi,
you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
You need a S-User to Login.
Regards
-Seb. -
EIS Installation and Configuration
Hi Everybody,
I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
But I have no idea how to configure(Creating DSN Catalog) in EIS.
I am using Oracle 10g. Can any one please help me on thsi installation.
Already I gone through the installation document but I didn't understand how to configure.
If anyone having installation and Configuring Screen shots please send me to my mail
Mail Id: [email protected]
This is very urgent I need to give presentation on the EIS
Thanks in Advance for your help
Awaiting for your quick ResponseI'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.
-
I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes installation on my personal laptop?
dcotejr wrote:
I had my iphone 4s synced to itunes on my work laptop. ... How do I change iphone settings to look at an itunes installation on my personal laptop?
You cannot.
By Design the iPhone can Only Sync to One iTunes Library at a time. -
I have the new Oracle 8i installer and here is why
I have been trying to get Oracle 8i on Linux and I feel that I
must share
my thoughts on the new Oracle installer with everybody.
I hate the new installer. I used to run the installer from
home over my
128Kbps connection while I was connected to the office machines,
because it
was simple text based. And Oracle 8i has changed all that!
I have nothing against GUI based installers, only when they have
a little too
many animated images that eat up bandwidth. I had to drive all
the way to
the office because I did not have sufficient bandwidth to display
the darn
ringing bell animated image. This is strictly the mentality of
Windows users
who like to work on the console of servers.
And check this out:
line 118 in my install log file at :
/usr/local/oracle/u01/app/oracle/oraInventory/logs/installActions.log
says :
platGroup = WINDOWS
And this is on Linux!!! Maybe the Oracle folks are forgetting
that Linux
users are a little too sensitive to these kind of mistakes. :)
This also supports my theory that the new installer is a gift
from Windows
programmers. Who are not too familiar with the idea of being
able to send
their video display to any computer around the world and work
from there.
A feature every Linux user takes for granted
There are numerous other bugs in the installer and other routines
of Oracle
8i for Linux. Some of them I will list here:
2. The installation types screen list 3 options:
Typical, Minimal and Custom.
Somehow Minimal takes more disk space (642 MB) compared to
Typical (585 MB).
Well that is what the installation screen says. I have not tried
to install
using the minimal install.
3. The installation cant figure out how much free space is
available on the /
partition. Is it that hard? Its gives warnings about how I may
not have
enough space.
4. dbassist cant find the cdrom if you try to install the default
database
from CDROM. It says cannot find CDROM even if you have all your
stuff under
/mnt/cdrom
5. The docs talk about software mount points and data mount
points /u01 /u02
/u03 and /u04 that I created, but I could not find anywhere to
specify them
like I was able to, with the last release.
6. "Oracle Protocol Support" section during the install shows no
options at
all. What happened to good ole Net8?
And many others. This product is a joke.
Atif.
[email protected]
nullMy sentiments exactly. There are so many bugs in the
installation of this release that I have just about given up.
And I haven't even started testing the new features yet!
I've tried the install on RedHat 6.0 straight out of the box (no
patches or updates applied) and followed the OIG and release
notes to the letter. Clearly, no one at Oracle did the same,
because there are many problems during install. I finally got a
simple database running, but there are some real gotcha's along
the way.
Here are just a few of the bugs I've encountered:
1. Zero length library file $ORACLE_HOME/lib/libnjni8.so.
Netasst doesn't work without it. Someone said they posted the
source code to the comp.databases.oracle.server newsgroup, but I
can't find it.
2. Database Creation Assistant thinks dbmssql.sql is called
dbmssml.sql.
3. Building the Intelligent Agent with TCL 7.5 causes a cascade
of undefined references when running gmake -f ins_oemagent.mk
agent
4. Database Creation Assistant doesn't understand OFA. It wants
to put all of the database files /u01/app/oracle/oradata/<sid> !
5. Database Creation Assistant will sometimes prevent editing
the data file names to put them in OFA compliant directories.
I am appreciative of the free developer licenses for so many
Oracle products, but this is the worst Oracle install I've had
in 12 years.
Atif (guest) wrote:
: I have been trying to get Oracle 8i on Linux and I feel that I
: must share
: my thoughts on the new Oracle installer with everybody.
: I hate the new installer. I used to run the installer from
: home over my
: 128Kbps connection while I was connected to the office
machines,
: because it
: was simple text based. And Oracle 8i has changed all that!
: I have nothing against GUI based installers, only when they
have
: a little too
: many animated images that eat up bandwidth. I had to drive all
: the way to
: the office because I did not have sufficient bandwidth to
display
: the darn
: ringing bell animated image. This is strictly the mentality of
: Windows users
: who like to work on the console of servers.
: And check this out:
: line 118 in my install log file at :
: /usr/local/oracle/u01/app/oracle/oraInventory/logs/installActio
ns.log
: says :
: platGroup = WINDOWS
: And this is on Linux!!! Maybe the Oracle folks are forgetting
: that Linux
: users are a little too sensitive to these kind of mistakes. :)
: This also supports my theory that the new installer is a gift
: from Windows
: programmers. Who are not too familiar with the idea of being
: able to send
: their video display to any computer around the world and work
: from there.
: A feature every Linux user takes for granted
: There are numerous other bugs in the installer and other
routines
: of Oracle
: 8i for Linux. Some of them I will list here:
: 2. The installation types screen list 3 options:
: Typical, Minimal and Custom.
: Somehow Minimal takes more disk space (642 MB) compared to
: Typical (585 MB).
: Well that is what the installation screen says. I have not
tried
: to install
: using the minimal install.
: 3. The installation cant figure out how much free space is
: available on the /
: partition. Is it that hard? Its gives warnings about how I
may
: not have
: enough space.
: 4. dbassist cant find the cdrom if you try to install the
default
: database
: from CDROM. It says cannot find CDROM even if you have all
your
: stuff under
: /mnt/cdrom
: 5. The docs talk about software mount points and data mount
: points /u01 /u02
: /u03 and /u04 that I created, but I could not find anywhere to
: specify them
: like I was able to, with the last release.
: 6. "Oracle Protocol Support" section during the install shows
no
: options at
: all. What happened to good ole Net8?
: And many others. This product is a joke.
: Atif.
: [email protected]
null -
What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide
I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
Clients and suggests it should be used for Jabber for Mac.
What is BDI or BDS spelled out? Something directory integration, but what is the B ?
Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
How can Jabber get any more confusing…
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
Please remember to rate helpful responses and identify helpful or correct answers. -
Error while building application installer and exe
i had tried to build an installer and exe for my appication which application and exe building is successfull. but when we install it over the system it does not read analog input and digital inputs and showing NaN in the indicator,I have treid many a ways and this works after disabling the counter reading section which is used to read the pulses from the quadrature encoder. when i again include that particular section it shows the same error. also this entire code works beautifully without any error from our source code, what might be the possible cause , please help me,
Hi Kodee,
1) Are using error handling in your code? Are you getting any errors?
2) What version of LabVIEW are you using? If you are using 8.0 or newer, then you can build a debuggable executable:
Debugging Applications and Shared Libraries
http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/debug_apps_dlls/
Regards,
Elizabeth S.
Applications Engineer
National Instruments -
I have also started my PC in safemode with Network enabled, as recommended by adobe, but to no avail! I just get to the 2% installation stage again, with the same error.
I have checked all the system requirements, all is OK. I am not a techie, I just like photography! but it now seems to me that Adobe like making the simple installation of a software programs impossible for normal computer users, can any body help or offer a simple solution! or do I have to return my software to seller again!Installation and launch log errors | CS5, CS5.5, CS6, CC -
https://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html -
Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error
Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
Version: 1201000100
Revision: 0
OS Platform: Generic Platform
Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this). -
10.2.8 installation and external hard disk does not show on desktop
I just reinstalled OS X 10.2 (by erasing the hard disk during installation) and upgraded with the Combo pack to 10.2.8 . This is an iMac G4 1GHz with a 17-inch display. I tried connecting a Western Digital MyBook with 500Gb through both the USB port and through FireWire. In both cases the hard drive does not appear on the desktop BUT does appear in the Disk Utility program and in the System Information window. Finder, therefore, doesn't display the drive. The MyBook drive is formatted to Windows FAT 32. Before I reinstalled OS X 10.2.8, this machine was running 10.3.9 and the drive did appear (I'm still searching for the 10.3 disk).
Is this an issue with OS X 10.2.8? Given the drive is detected by the System Information section and by the Disk Utility, is there a way of forcing Finder to display it (and allow access)?Sometimes I have found that I have to turn of the ext. hd and then reconnect the firewire cables. there is a cylinder that is an inch away from one of the firewire plugs, which should be connected toward the tower and the other firewire plug toward the ext. hd. have patience, sometimes it will show up. also a restart maybe...
-
I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod? -
Windows 8 64-bit, failed installations and RAID 1 resync on HP ENVY h8-1520z
I recently purchased an HP Envy h8-1520z with a single SSD and 8 GB RAM running Windows 8 Pro 64-bit. I installed 2 Western Digital 500 GB WDC WD5000AAKX-001CA0 HDDs on SATA ports 5 & 6 and configured them as RAID 1 in the BIOS. I have started installing apps on the RAID 1 array (E since the SSD is only 256 GB.
While installing software, some install fine, but often the installation hangs with no errors indicated and I have to kill the installer task through task manager. I usually follow that with a system shutdown or restart and almost every time that results in a resync of the RAID array. Sometimes the shutdown or restart is quick, and other times it takes several minutes with intermittent disk activity as indicated by the drive light. I have sometimes given up after 10 minutes or so and powered down by holding down the power button. I can understand a resync after the forced power down, but it seems that all it takes to cause a resync is a failed installation, and that seem to happen a lot, even with software that explicitly says it is Windows 8 compatible. Sometimes the applications run fine even after an apparently failed installation and other times not so much.
Has anybody else seen this behavior or have any suggestions? I’d like to get this sorted out before I load any more software.Hi,
Did you check each hard drive for straps? There should not be any straps installed on the hard drive. These drives do have strapping posts.
Did you use the AMD RaidExpert to create the array volume? Did you wait until the RAID migration was complete before using the array volume?
Check the AMD RaidExpert for errors. It's possible that you have a bad hard drive(s).
Many applications want to be installed on the C drive. Your SSD is 256GB so you should have plenty of space for most applications and the application performance will be improved. Use the RAID 1 array to keep and store your data. The mirroring process of RAID 1 will protect it in case one hard drive fails.
You might want to consider removing all of the data etx.. from the array, use the AMD RAIDExpert to delete out the array volume. I would then run for hard drive diagnostics. If the hard drives are free from errors then use disk management to separately reformat each hard drive. Now go back to the AMD RaidExpert and create your new array volume.
Be sure to review the software and bios updates for your PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
I have been having trouble figuring out how I can put the installer and adobe apps on another drive other than my C drive. Please Help me. My C drive is getting too full.
The CC app itself will always install on the system root drive as will several shared components. Once the CC app has been installed, you can choose a different install location for the main programs in the app's settings.
Mylenium
Maybe you are looking for
-
I want to debug a PL/SQL which located in a database in another computer. I use that computer's IP address, name and my local computer's IP address, SQL developers always has error: Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE Executing PL/SQ
-
[SOLVED] Install arch on a partition and still access files on other
Basicaly what i want to achieve is to have a dual boot system on my laptop where i can access the files in some sort of shared storage or just to be able to access my windows files when im booted up in arch is there a way to achieve this? Last edited
-
Guys need help/suggestions. I need to migrate the whole schema(from oracle) to another oracle database environment. The easiest way I would think of is execute the ddl scripts for the objects. But that way it is going to take too much time and also I
-
Photoshop Elements 7 neu PDF Miniaturen
Plötzlich bekomme ich beim Öffnen eines Dokuments oder Bildes durch Emails ein zweites Fenster PDF Importieren mit Miniaturen. Wenn ich sie vergrössern will, kommen sie als weiss/graues Schachbrett und das in der letzten Zeit immer, dazwischen kommt
-
My link to download keeps coming up as an error website