XI installed something wrong?
on component monitoring in RWB, adapter engine is shown on the decentral adapter. but i do not know why adapter engine is located in decentral adapter.
and there is no thing in integration server.
is there a good solution to fix it correctly?
when i click cache notification, i got a follow error
and cache refresh show "cl_http_client RFC_READ_HTTP_DESTINATION AUTHORITY_NOT_AVAILABLE"
"Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>"
iTunes Store: Invalid, inactive, or illegible codes
Similar Messages
-
I bough a used Macbook Pro mid 2009 that came with OS 10.8.9 it didn't have a backup restore disk with S/N W8******66D
When trying to view some youtube videos; a window would pop up saying "it needs adobe flash player is required for video play back get the latest flash player" but after downloading the file and during installation would have errors and will not installed.....tried to reboot and install again.....but still the same.
The othe thing I had noticed is when using a good Bose headset with mic the sound output would noticed the headset and then switch from headset to Internal speekers and headset.....thinking that there might be something wrong with the plug in port of the computer or the headset.....the headset works with no issues on my iPad so there must be something wrong with the computer.....tried to move the plugin around the port but no change....while the headset is plug in can hear a short clicking noise and the sound would get lost and back again......but with nothing plugin to the port there is no issue with the sound or mic.
Thanks for your feed back......it looks like I have two different issues one is a software issue and the outher is a hardware issue
<Edited By Host>The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)
Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
tt2 -
MAc book pro. I have downloaded and installed os x yosemite now mac book pro will not start? How long should it take? Is there something wrong?
The 2 computers here took about 45 minutes to an hour each.
The best thing to do is give it more time. If it gets too ridiculous, shutdown using the power button and then restart. Check menu/About This Mac to see if it is installed. -
Dear MAC-Friends.
PLEASE HELP ME.
I am extremely afraid to do something wrong - what will be a failure so I loose all the photos I had in my iphoto library before installing the Mountain Lion.
I have just installed the MOUNTAIN-LION and now I can´t use my Iphoto-programme without answering the following question:
Choose another Library ? ( But I only want the choose the photos which one was in the old iPhoto-Library and not the other photos on the MAC-computer ? ).
and the other possibility is:
Create a new Libray ! Which iPhoto-library ?
And why create a new and to risq to loose the old photos.
PLEASE HELP ME.
Kind regards FINN GRABOWSKIOk. Let me first ask you, do you have any backups of your files - for example, do you use Time Machine or any other backup system?
Next, quit iPhoto. In the Finder, go to your Pictures folder. Is there a file there called iPhoto.Library? How large is it? (If it doesn't show the size, click once on it, click cmd-I to see the information). If it's a healthy size (ie, several GB), then that should be your library, and you can double-click it to launch iPhoto. (The application will remember where your library is next time, you can just launch iPhoto normally).
If that's not the right file, check your Trash. Is there anything in there?
Matt -
Been trying to download Lion from the App Store. It saks for login, I login in and it starts install. After about 13 hours it finishes download then asks for login again. After login, it starts installing again. It never shows installed. This is the third time I am doing this. Am I doing something wrong?
Sorry, my bad, we have the iMac G5 10.6.8. I just got home and the message said an error occurred and was unable to download. Am I doing something wrong or is there something I need to do.
-
Something wrong when installing then demo database schema
rdbms server 9.2.0.5 win32
jdev904
bibeans904
Something is wrong when installing the demo database schema.While executing cwm2_olap_metadata_refresh.mr_refresh at last ,system hint that cwm2_olap_metadata_refresh.mr_refresh must be declared.That means there is not cwm2_olap_metadata_refresh.
Why and What should I do ?
Thanks a lot!After executing the file catpatch.sql,the demo database schema completed successfully.But there is something wrong during bi_checkconfig.
BI Beans Diagnostics(v1.0.2.0) 04-6-30
==========================================================JDEV_ORACLE_HOME .......................... = d:\jdev904
JAVA_HOME ................................. = d:\jdev904\jdk
JDeveloper version ........................ = 9.0.4.0.1419
BI Beans release description .............. = BI Beans 9.0.4 Production Release
BI Beans component number ................. = 9.0.4.23.0
BI Beans internal version ................. = 2.7.5.32
Connect to database ....................... = Successful
JDBC driver version ....................... = 9.2.0.4.0
JDBC JAR file location .................... = D:\jdev904\jdev\lib\patches
Database version .......................... = 9.2.0.5.0
OLAP Catalog version ...................... = 9.2.0.5.0
OLAP AW Engine version .................... = 9.2.0.5.0
OLAP API Server version ................... = 9.2.0.5.0
BI Beans Catalog version .................. = N/A; not installed in bibdemo
OLAP API JAR file version ................. = N/A
OLAP API JAR file location ................ = d:\jdev904\jdev\lib\ext
Load OLAP API metadata .................... = Unsuccessful
Error: BIB-10100 Cannot connect to the database. (Reason: See error BIB-16626)
============================================================================
1) BIB-10100 Cannot connect to the database. (Reason: See error BIB-16626)
2) BIB-16626 Cannot connect to the database because OLAP client classes are missing.
1) BIB-10100 Cannot connect to the database. (Reason: See error BIB-16626)
============================================================================
oracle.dss.metadataManager.common.MetadataManagerException: BIB-10100 Cannot connect to the database. (Reason: See error BIB-16626)
at oracle.dss.metadataManager.client.MetadataManager.setConnectionObjects(MetadataManager.java:4015)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:862)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:799)
at BICheckConfig.checkConnection(BICheckConfig.java:277)
at BICheckConfig.main(BICheckConfig.java:1348)
2) BIB-16626 Cannot connect to the database because OLAP client classes are missing.
============================================================================
oracle.dss.connection.common.ConnectionException: BIB-16626 Cannot connect to the database because OLAP client classes are missing.
at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:182)
at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:286)
at oracle.dss.connection.client.Connection.connect(Connection.java:409)
at oracle.dss.connection.client.Connection.connect(Connection.java:326)
at oracle.dss.metadataManager.client.MetadataManager.setConnectionObjects(MetadataManager.java:3997)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:862)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:799)
at BICheckConfig.checkConnection(BICheckConfig.java:277)
at BICheckConfig.main(BICheckConfig.java:1348)
What should I do ,any help?
Thanks ! -
I just tried to install iOS7... and i think I'm doing something wrong...
It brought me to this white screen that says "Hello" and "Slide for passcode" and i did that... but I tried to enter my normal phone 4 digit password and it just won't let me in? Am I doing something wrong? It just won't let me in no matter what I type.... and it's not letting me create a new passcode??
it's not... it just says "enter passcode" above and the numbers..... and it says "emergency" and "cancel"... that's all.
-
Is there something wrong with my battery?
Hi everyone! I have an Iphone 5 that was newly "remodeled" for tmobile. I was wondering if there was something wrong with my battery after a recent decline in performance. I am updated to the latest iOS and I recently restored all of my settings on my phone in an attempt to increase battery performance, leaving only wifi on location for weather. With my current usage and standby, do I have something to be concerned about? I know some individuals that have my usage and will have a standby time of over a day. Advice and opinions is very much appreciated.
Usage and Standby the same means that there is an app on your phone that is running continuously. Usually its an app choking on bad data, or trying to send and failing. There are a few troubleshooting steps you can try:
Mail is a common culprit, especially if you have a Microsoft Exchange email account. If you do, go to Settings/mail,contacts,calendar, tap on the Exchange account, and turn off the switches. Then back out of settings and restart the phone (hold HOME and SLEEP until an Apple logo appears). Then turn the switches back on. This clears the mail, contacts and calender queues. It will take a while to resync content, so don't check battery condition until the resync is finished. And its best to do this with a WiFi connection as a lot of data may go by.
If that doesn't fix it do the same with your iCloud account, and any other Push accounts you may have (Yahoo, gmail, hotmail, AOL).
Next, look for apps that run in background (most of the apps in the Quick Launch ribbon do not run in background, but a few do - music and video streaming apps, Facebook, Twitter, Yahoo Messenger, Whatsapp, etc). Kill them in the quick launch ribbon by pressing HOME twice to display it, then hold your finger on any app until they all wriggle, then tap the "-" on each one. It won't do any harm to kill them all.
Note that if you have Google Maps installed and you asked it for directions it won't stop tracking you until you actually kill it in the Quick Launch ribbon.
good luck and report back!
BTW, you will see a lot of posts blaming some specific version, now 6.1.4 (because it's the newest). But you will see just as many reports for 6.1.3, 6.1.2, ...5.1,...4.1...3.0, etc. It's nothing wrong with the version (except for 2.1, which had a real bug), it seems to be caused for some people by the upgrade process itself. But there are also many people who encounter this symptom far away in time from any upgrade. -
Is there something wrong with the IOS 6 update?
Ever since I downloaded the iTunes IOS 6 update on my 2nd-gen iPad, I haven't been able to check my list of purchased apps in the purchased section the iTunes store app. I tried logging out & signing back in and I tried rebooting my iPad, but neither of them worked. Can you please fix the IOS update? Thanks if you and keep up the incredible work!
Never mind, there's definitely something wrong with the IOS 6 update. Sometimes the App Store doesn't show that an app has been purchased & it only shows the price of the app. Other times, it doesn't show that an app is currently being downloaded or that it's installed.
Still though, Apple, you really do need to fix this IOS 6 because the Purchased Apps section won't finish loading & display the ones that have been purchased. Also, you need to improve the App & iTunes gift card payment method because if you use a credit card & then switch back to gift card, it doesn't remember how much leftover money you had before & you can't combine the change from the previously-used ones together into one lump of money.
32 cents isn't enough to buy anything, not even a $0.99 app. The money is going by without being used and its a waste of money! If it's possible, please fix these two problems. Thanks if you do & keep up the incredible work!!!!! -
iPhoto has somehow uninstalled itself, or I've done something wrong. If I try to open iPhoto, it gives me this message: "You can't open the application "iPhoto" because it may be damaged or incomplete". I have an iMac OS X. How do I reinstall iPhoto please?
What is your iPhoto version and how did you install it originally?
If it came with a new mac and Lion or Mt. Lion installed, you can delete iPhoto from the Applications folder (don't empty the Trash) and download it again from the "Purchased" tab of the App Store.
If you have bought the iLife CD, reinstall iPhoto from the installation media, after deleting it from the Application folder.
Or if your Mac came with an older MacOS X, but iLIfe preinstalled, use the system Install CDs, see Terence Devlin's post here: Re: My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.
Regards
Léonie
P.S: This may not only be a problem of a broken iPhoto. What did you do, directly before this happened? Did you run a program, that will clean the Mac to save space, like "Clean My Mac" or "Mac Keeper"? These little helpers can be risky and overdo it and remove too much. Then it might be safer to reinstall your system, because other essential files might be missing now. -
my macbook pro 13 early dont see ssd transcend 256 gb after upgrade.if i put him in usb,he work!i do something wrong?!help me,please!
You showed a kernel panic file from OS X, apprantly Log Me In is installed into OS X or running when you log in.
You should be using the developers installer/unistaller to remove Log Me In from OS X.
Somehow it's in OS X, I don't know, but it's there and you need to remove it. I'm not dealing with Windows, just OS X.
Talk to Log Me In people and find out what is installed where so you can do a manual deletion out of OS X.
If that doesn't work, you have to reboot holding the Shift key down manually search for any Log Me In or Himachi files on your computer, in your System/Library/Extensions folder too, use the free Easy Find.
https://s3.amazonaws.com/DTWebsiteSupport/download/freeware/easyfind/4.9/EasyFin d.app.zip -
In OS X Mavericks using Safari, the search bar at the top that i had on the previous system version disappears only reappearing in the full screen. Do i have to go into full screen every time? Bit of a pain but no doubt I'm doing something wrong!
Those are all fine
Here is how to see RAM overloaded…
Reboot to see the system in it's default state.
Open TextEdit for the sake of it
Open Activity Monitor & Terminal from /Applications/Utilities.
Select the Memory tab
In Terminal enter the following command
memory_pressure -l critical
# note that is a lowercase L
RAM usage will climb, compression will begin the VM will become way more than the system has installed.
Eventually the system will start swapping (look for RED) - Watch the 'memory pressure' & 'Swap used' as this happens.
Try switching to TextEdit - the system is still coping !
Switch back to Terminal & hit ctrl+c to stop the process.
Watch the VM & memory pressure return to normal levels.
This OS kicks 4ss !
Your problems may lie elsewhere -
Hey,
I had this exactly problem when installing gdm half year ago.. i cant see why it hasnt been fixed..
When installing gdm, gdmsetup ends up here:
/opt/gnome/sbin/gdmsetup
which makes problems.. since the system wont find it when running through terminal or gnome menu..
This doenst seem to be a big problem, since i can ln -s the correct stuff to /sbin/ but why doesnt it end up in the correct place in the first place?
Now that i have ln -s gdmsetup to /sbin and run gdmsetup from terminal i get this:
[jinn@Estergon share]$ gdmsetup
(gdmsetup:9679): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Failed to connect to socket, sleep 1 second and retry
Trying failed command again. Try 2 of 5.
Failed to connect to socket, sleep 1 second and retry
Trying failed command again. Try 3 of 5.
Failed to connect to socket, sleep 1 second and retry
Trying failed command again. Try 4 of 5.
Failed to connect to socket, sleep 1 second and retry
Trying failed command again. Try 5 of 5.
Command failed 5 times, aborting.
Could not access GDM configuration file.
apparantly the conf file is not either where it should be..
Please let me know that i have been doing something wrong, because i dont understand why this problem hasnt been fixed..Just compiled in these:
[jinn@Estergon ~]$ sudo locale-gen
Generating locales...
en_US.ISO-8859-1... done
en_US.UTF-8... done
sv_SE.UTF-8... done
sv_SE.ISO-8859-1... done
thought of adding the en_US might be neccessary.
can you give me quick commands to add it to the my PATH.. yet this doesnt really answer my question of why it is not working directly without small fixes after install. -
My iPhone is in recovery mode, But once it's done with the process a tab comes up saying there was something wrong restoring it (1015) error. Any suggestions of how I could fix this?
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words:
The backup to which you're trying to restore was created with a lower or previos version of iOS than the one installed on your iPhone during the recovery. If this is the case then you'll be unable to restore your phone with that backup and you'll have to set your iPhone up as new. Or,
Your iPhone was/is jailbroken. If this is the case, there is nothing anyone here or at Apple can do for you.
Maybe you are looking for
-
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
-
Hi, I have a problem while trying to import java classes using <jsp:directive.page import....... tag. though the <%@page import = ....... tag works fine... any help would be appreciated..
-
OS authentication via Web interface (Intranet) possible?
Hi, I have database users that have access to iFS too. The database users are OS authenticated. It anoyes them, that contrary to the standard explorer interface, the Web (IE) interface requires them to type in their OS password. I did not find any me
-
hi experts, i want to calculate the GR quentity, Open quentity,PO quentity, i want the logic for that. Regards, Amit.
-
I just day's ago bought Final Cut Studio 2 to upgrade my Final Cut editor as I primerilly use a G5 as my main machine and a Mac Book Pro for on-the-go editing. So I decided to get a Legal Copy of Final Cut Studio 2 Upgrade. However now as I go thro