XI Integration Engine- You cannot log on to system BS_SAP_R_3 with user XIR

I have given the correct user name and password while creating RFC destination and Port.
And I see wrong user ID/password in ping status.
Ping Status: You cannot log on to system BS_SAP_R_3 with user XIRWBUSER
Last Retry Thu Jan 18 23:13:47 UTC 2007 .
Can anybody guide me on this?
Thanks
Chiru

Hi,
I have correct user id/ password in RFC destination. I do not know why in Runtime work Bench it is showing the wrong userid/password.
I forgot to give it at the first time and later I gave the user details.
And in Runtime work bench this error is not going away.
Any help on this?
Thanks
chiru

Similar Messages

You cannot log on (CUA System assignment missing)

Hi
We are in the middle of CRM upgrade. We upgraded couple of test (CRS) and Dev (CRD) server. We are creating both CRD/CRS in the Solution manager system landscape using tcode SMSY as the satellite servers. Connectivity between satellite server CRD and solution manager server SMP (also in CRD and SMP) has been successfully created.
While checking the Authorization test in Sateliite server (CRD/CRS) for RFC "SM_SMPCLNT050_BACK", we are getting the following error:
"You cannot log on (CUA System assignment missing)"
All other RFC created by SMSY is working fine.
To Fix this problem, i tried to repeat same process again. I was able to delete following RFC's using "clean-up RFC" function of SMSy tcode.
- SM_CRDCRMCLNT050_READ
- SM_CRDCRMCLNT050_TMW
- SM_CRDCRMCLNT050_TRUSTED
and in satellite server (CRD), i deleted following RFC's manually:
- SM_SMPCLNT050_BACK
- SM_SMPCLNT050_TRUSTED
Now, when i checked the RFC destination in SMSY of solution manager server, it is still showing me RFC "SM_SMPCLNT050_BACK". But it is not there in the satellite server as i had deleted it manually. To verify it, I checked table RFCDES in satellite server and "SM_SMPCLNT050_BACK" RFC is not there in table.
I again re-generated RFC's in SMSY of solution manager server, but got the same error ""You cannot log on (CUA System assignment missing)" for SM_SMPCLNT050_BACK.
So we are getting two problem for same process:
- You cannot log on (CUA System assignment missing)
- I deleted RFC " SM_SMPCLNT050_BACK" manually in the satellite server but SMSY still showing it in "Clean up RFC windows".
Not sure if both problems are related to each other. Pls guide to solve these issue's.
Thanks

Thanks Sunny
Your suggestion help me to fix one problem. "You cannot log on (CUA System assignment missing)" problem is fixed.
Authorization in SOLMAN system was missing for user ID that is being used in the "SM_SMPCLNT050_BACK" of the satellite server. There was no authorization profile assigned to User. This is strange.
Process (SMSY) should have created user ID and assigned required authorization profile to the User ID but it did not happened properly.User ID was created but no auth profile was assigned.
I'm facing the same problem is other server also. User ID has been created but auth profiles are missing for user ID that is being used in "SM_SMPCLNT050_BACK" of the satelliet system.
Our SOLMAN server (SMP) is the CUA Central System. Do i ned to check anything in SOLMAN server for CUA?
Following detail could be one another reason for the missing authorization profile in User ID:
- To solve the problem of "You cannot log on (CUA System assignment missing)" , i deleted following RFC's using "clean-up RFC" function of SMSy tcode.
- SM_ERDECCCLNT050_READ
- SM_ERDECCCCLNT050_TMW
- SM_ERDECCCLNT050_TRUSTED
and in satellite server (ERD), i deleted following RFC's manually:
- SM_SMPCLNT050_BACK
- SM_SMPCLNT050_TRUSTED
but "SM_SMPCLNT050_BACK" was still showing in the RFC destination in SMSY of solution manager server. In 'generate RFC destinations'. I re-generated and process created "SM_SMPCLNT050_BACK" in SM59 of ERD and user ID for this RFC has been created in SOLMAN server without adding any auth profile.
Not sure, if this is the reason. I opened oss message three days ago but still waiting for reply.
- I'm using my account to generate RFC and i think (as told by security team) that i have all authorization in both server required to generate RFC. I may need to add some more authorization.
Could you pls suggest to fix the problem of "SM_SMPCLNT050_BACK". i would like to know why this RFC is still showing in SMSY even after deleting it manully in SM59 of ERD server.
is it possible if i send you the screenshot of document that i send it to oss for your suggestion. can i hav eyour mail ID?
Thanks a lot for your help again..
Amar

You cannot use the application "System Preferences" with this version OS X

You cannot use the application “System Preferences” with this version of Mac OS X.
I received this error message when trying to run System Preferences (SP) for the first time after running the 10.5.1 update (from the download, not software update). After the update, I repaired permissions. Did another restart. Same.
I reinstalled 10.5.1 update. Same message. Logged in as another user. No change.
I removed the com.apple.systempreferences.plist from ~/library/preferences. No change, and it did not re-create the .plist file.
Any ideas? No one else seems to be having this problem as far as I can tell.
dkrockville

I have had this problem with many applications after updating to 10.5.1, including
System Preferences, Calculator, Preview. Tried repairing permissions, and other tips from this thread. The strange thing is, the actual Leopard applications seem to have actually vanished? I don't know if this is anything to do with Time Machine; Anyway, My fix was:
Download Pacifist (if you don't already have it), locate the apps that you're having problems with on the Leopard install DVD, and copy them to the Applications Folder (Click on 'Replace Bundle')
Problem Solved for Me!
Hope this Helps!

"Access denied. You cannot log on to an older version of the CMS"

Post Author: dnaman
CA Forum: General
Hi All,
I recently installed Crystal Reports XI (11.0.0.1282) on my desktop and am trying to save a report to Crystal Enterprise 10. When i try to save it, i get the error above - "Access denied. You cannot log on to an older version of the CMS".
Is it possible to connect to CE 10 with CR XI or do i need to get CR 10 as well? I would have hoped there would be backward compatibility.
Thanks in advance,
dnaman

Hi,
CR 2008 is not compatible with BOE XI R2. The Crystal Reports 2008 report designer is unable to log into XI Release 2 or older servers.
The functionality that depends on an enterprise session is unavailable. If you are using one of these report servers(CRS XI/XIR2 or BOE XI/XIR2), we recommend you use the Crystal Reports XI or XI Release 2 report design tool.
The corresponding server for Crystal 2008 is BO XI R3 which will support all the new functionalities present in Crystal 2008.
I hope this helps you.
Regards,
Prashant.

Solman EHP1 upgrade Stack 20 - cannot log in to system

Hi all,
I am currently doing a patch of Stack 20 for solman EHP1. I was able to create the queue, was able to continue until import proper phase 2. After a while, i cannot log on the system.
CX_WB_ED_SYNTAX_ERROR is unknown. abap program SAPMSYST had to be terminated. status LIVE of the user interface SAPLSRABAX_EXC missing.
also we found a deadlock in the ora alert trace file.
here are the logs:
SLOG0944.log
ERROR SAPK-701DRINSAPBASIS SOL I 0012 20091027160822 SAPBASISUSER SAPBASIS     cbcsapsolm 20091027142413047
STOP MAIN IMPORT          SOL I      20091027160831              SAPBASIS     cbcsapsolm 20091027142413047
ERROR: stopping on error 12 during MAIN IMPORT
START INFORM SAP-SYSTEM OF SOL Q      20091027160831              SAPBASIS     cbcsapsolm 20091027142413047
START tp_getprots          SOL Q      20091027160831              SAPBASIS     cbcsapsolm 20091027142413047
WARNING: System SOL. Warning.        20091027161236 :
WARNING:       Background job RDDIMPDP could not be started or terminated abnormally.
      Please check that the R/3 system is running.
      Please check the system. Use transactions SM21, SM37, SM50.
WARNING:       (This warning is harmless if no further warnings follow.)
WARNING: System SOL. Warning.        20091027170810 :
ERROR:       The following call returned with exit code -100:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=SOL
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
STOP imp all              SOL   7006 20091027170857              SAPBASIS     cbcsapsolm 20091027142413047
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
dev_evt
Tue Oct 27 17:08:08 2009
Trace File of External Event Raiser (Level=2, Append=0)
EventID: SAP_TRIGGER_RDDIMPDP
SAP message server host: cbcsapsolm
SAP message server service (new): 3900
SAP message server service (old): sapmsSOL
MsIAttachEx: connect to cbcsapsolm / 3900
NiIInit: allocated nitab (2048 at 0000000002980080)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiPGetNodeAddrList: got 1 interface(s) from operating system
          [0] IP-Address: 172.20.20.128
NiHsLGetNodeAddr: got hostname 'cbcsapsolm' from operating system
HN='cbcsapsolm.cbcmain.cbc.chinabank.ph'; Add[0]=172.20.20.128
NiIGetNodeAddr: hostname 'cbcsapsolm' = addr 172.20.20.128
NiIGetServNo: servicename '3900' = port 0F.3C/3900
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 1812 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIConnectSocket: hdl 0 is connecting to 172.20.20.128:3900 (timeout=5000)
Tue Oct 27 17:08:09 2009
SiPeekPendConn: connection of sock 1812 broke (10061-WSAECONNREFUSED: Connection refused)
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1812
    (SI_ECONN_REFUSE/10061; I4; ST; 172.20.20.128:3900) [nixxi.cpp    2835]
NiICloseHandle: closing initial hdl 0
ERROR => MsIAttachEx: NiBufConnect to cbcsapsolm/3900 failed (rc=NIECONN_REFUSED) [msxxi.c      652]
ERROR ***: MsAttach (host=cbcsapsolm, serv=3900), rc = -100
MsIAttachEx: connect to cbcsapsolm / sapmsSOL
NiHsLGetNodeAddr: found hostname 'cbcsapsolm' in cache
NiIGetNodeAddr: hostname 'cbcsapsolm' = addr 172.20.20.128
NiHsLGetServNo: got service name 'sapmsSOL' from operating system
SN='sapmsSOL'; Port=0E.10/3600; PC=tcp
NiIGetServNo: servicename 'sapmsSOL' = port 0E.10/3600
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 1800 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIConnectSocket: hdl 0 is connecting to 172.20.20.128:3600 (timeout=5000)
Tue Oct 27 17:08:10 2009
SiPeekPendConn: connection of sock 1800 broke (10061-WSAECONNREFUSED: Connection refused)
NiHsLGetServName: found port number 0E.10/3600 in cache
NiIGetServName: port 0E.10/3600 = servicename 'sapmsSOL'
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1800
    (SI_ECONN_REFUSE/10061; I4; ST; 172.20.20.128:3600) [nixxi.cpp    2835]
NiICloseHandle: closing initial hdl 0
ERROR => MsIAttachEx: NiBufConnect to cbcsapsolm/sapmsSOL failed (rc=NIECONN_REFUSED) [msxxi.c      652]
ERROR ***: MsAttach (host=cbcsapsolm, serv=sapmsSOL), rc = -100
alert_sol
Tue Oct 27 16:08:17 2009
ORA-00060: Deadlock detected. More info in file f:\oracle\sol\saptrace\usertrace\sol_ora_5280.trc.
Tue Oct 27 16:08:20 2009
Completed checkpoint up to RBA [0x5e7.2.10], SCN: 17756362
Tue Oct 27 16:08:22 2009
ORA-00060: Deadlock detected. More info in file f:\oracle\sol\saptrace\usertrace\sol_ora_188.trc.
hope you can help!
Many thanks!
Edited by: Jeb Barrios on Oct 28, 2009 3:11 AM
Edited by: Jeb Barrios on Oct 28, 2009 3:13 AM
Edited by: Jeb Barrios on Oct 28, 2009 3:15 AM

Hi,
Based on my checks, in my opinion its best to open an OSS msg, as most of the time it will require the message processor on SAP side to apply some internal tool to resolve this. Since it is a matter with package stuck scenario.
You may want to open under BC-UPG-OCS
Hope this helps.
Cheers
SH

You cannot reconcile a/p invoice transaction with A/P Down Payment request manually

Dear Experts,
One of my client has facing this problem while doing Reconciliation then he is getting the following error.
"you cannot reconcile a/p invoice transaction with A/P Down Payment request manually"
then we found a solution in SAP Forums and applied the same in Test Company Environment, then its working good and also attaching the scenario with screen shot.
Please have a look into the attachment then tell us. Is it a good practice to proceed or is there any solution as simple as this.
One more thing is my client has having more 20000 records to do reconciliation and he is looking for any alternative solution.
So please tell us a Better solution.
We are awaiting for your prompt response.....

Hi,
Please check SAP note:
1340606 - Paid Down Payment Request cannot be reconciled
internally.
Thanks & Regards,
Nagarajan

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

'You cannot use the application ical.app with this version of Mac OS X'

When I first upgraded to 10.5 ical and calculator both crashed when starting and now after upgrading to 10.5.1 I get the following message - 'You cannot use the application ical.app with this version of Mac OS X'
This is only on my G4 powermac. No problem with Intel MacBook.

Are you, by any chance, one of "those people" that move applications to something other than the default location?
I know I am.
When I upgraded, I saw the same problem - I had moved iCal (among others) outside of "applications" to something like "Applications/Business Apps"
The version in "Business Apps" was the Tiger version, and it wouldn't run. However, the Leopard version (Installed to /Applications) worked fine.
So, I deleted the "Tiger" version, moved the iCal to where I wanted it, and all was well.
In a similar note, I put a number of iLive apps in a different folder -- and OS X software update stopped finding updates for those apps. I had to move them back to /Applications in order to get OS X software update to run them.

10.5.2: You cannot use the application "System preferences.app" with...

Hello
after (successfully) updating from 10.5.1 to 10.5.2, the System Preferences.app cannot be started. Either the application does not start (a silent error) or there is a message "You cannot use the application "System preferences.app" with this version of MacOS X." The version is 10.5.2, according to "About this Mac", while the application version is 3.5. The same happens when I attempt to open "Time machine preferences" using the new menu/icon on the bar.
Any help is appreciated.
Thanks in advance,
Marinho.

Thanks, I did that, but it didn't solve the problem.
By the way, the application version (of System preferences.app) remained the same (old one). Then I removed the application to Trash (meaning to restore it later if required) and applied the update again (and a third time), but then a new System preferences.app was not installed and the older one has disappeared from the trash! What a mess this update turns out to be...
Marinho.

Log on the other computer with user name and password

How to use labview to write a software to log on the other computer with user name and password?

Jimmyzeng wrote:
Nobody can help on this?
Besides repeatedly asking the same question in thread after thread, you are not providing enough information to answer the question. You have been given answers already stating that operating systems do not make this very easy to do using programs for security concerns. In addition, the authentication process varies depending on what service you are communicating with. You really need to provide more information if you want to get meaningful answers to your questions.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Configuration of Integration Engine Trace and Logging

Hi,
on XI we can configure tracing and logging of messages via SXMB_ADM / Conf Integr Engine / category RUNTIME parameter LOGGING or TRACE_LEVEL. I connected an application system (WAS 6.20) and cant find this parameters. They r not chooseable. Does anybody know why? Is there another functionality to customize the trace?
Regards,
Udo

Hi Udo -
Did you apply the APPINT component? More info in Note 439915.
Regards,
Jin

Cannot log in to Google "Accounts" with Safari

I cannot seem to login and use Google Services with Safari 2.04.
This started when I discovered I was unable to log in to google calendar in Safari, and became a support ticket to Google (which is still pending) and is really confounding me.
What happens is that I go to go to http://www.google.com/accounts and attempt to login. Once I hit the submit button, accounts page plainly refreshes. However, if I put in a totaly invalid user or password, I will get a message telling me the user or pass is invalid.
In Firefox, if I attempt the same scenario from google.com/accounts, after submit, I get the page that shows me all the services available for me to use, like gMail, calendar, etc.
Here's what I've already tried.
Safari troubleshooting...
- backup/remove ~/Library/Safari
- backup/remove ~/Library/Caches/Metadata/Safari
- backup/remove ~/Library/Caches/Safari
- backup/remove ~/Library/Preferences/com.apple.internetconfig.plist
- backup/remove ~/Library/Preferences/com.apple.internetconfigpriv.plist
- backup/remove ~/Library/Preferences/com.apple.Safari.plist
- backup/remove ~/Library/Cookies
After removing all the above, Safari is basically back to Apple's factory default settings. Even after all this, Safari still cannot log in. The same behaviour occurs when I hit the submit button, I'm just brought right back to the same page I started at, and am not logged in. Calendar never renders, or I'm left looking at the accounts log in screen.
It's notable that this issue does not appear to be specific to my google account, but specific to one particular Mac I use. I am able to login to google/accounts on my laptop, but not on my office machine using Safari.
To make it even more mind numbing, it seems to be specific to a user profile on my office Mac. I tried creating a new user account on this same machine, and with the fresh clean home directory, was able to login to google accounts, calendar, etc. So, obviously, a totally clean home directory, library, app support, etc results in usability.
I'm not sure where else to go with this. Are there other supporting files to Safari within my home directory that I missed removing to set it back to "clean". I cannot imagine the problem being specific to the application bundle for Safari since each user on the computer is using the same one, this behaviour must be related to something within the user home directory somewhere.
Anyone else seen this same behaviour and know how to fix it, preferably without just creating a new user and home dir.
-jim-

Hello Jim,
Check your router for firmware updates,not being able to sign into only 1
or some sites has been a symptom for some users see this topic,
http://discussions.apple.com/thread.jspa?threadID=635607&tstart=500
The other thing to check for is a firewall on your router that may need
adjusting.Are you using Net Barrier?
Post back & let us know, how you fare.
Eme
P.S you did make sure to QUIT Safari before removing the cache folder
etc.. correct, if it is not QUIT it will recreate the same corrupt, files & or folders.

You cannot open window Service Call Form with your current license 8.8

Hi Expersts,
I am trying allocate license for users in 8.8 (PATCH 09) , I am assigning properly but when log in to assigned user i am continously getting the following error. again i checked license has been allocated correctly. it is a CRM License
Kindly help
You cannot open window [60110] Service Call Form with your current license
Regards
Mohamed

Dear Mohamed,
This issue probably occurs due to the application error described in the SAP Note [1456922|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1456922].
When login B1 with incorrect upper/lower cases for the user name (eg. The user name is registered "manager" but login as "Manager"), the user can login successfully but fails to open a certain form window the user has permission.
This issue is planned to be fix in a Patch of 8.8.
As workaround, until the issue will be fixed, the users should use exactly the same user name as itu2019s represented in the OUSR table, with case sensitive user code.
hope it helps,
Regards,
Ladislav Meszaros
SAP Business One Forum Team

Cannot log on to the internet with password and us...

Since I have had my computer repaired due to virus, I cannot log-on to the internet using my username and password to get upgrades and apps etc.....Any ideas on how to rectify the problem.

HI,
I belive you mean here to acces Ovi Account.
There has been some amount of thread for this issue in forum.
This problem has to do with expired certificates that you have on your computer. We are working to get the problem fixed for the next release.
To remove the problematic certificates, do the following:
On your computer, open Control Panel and click Internet Options.
In the Internet Properties window, select the Content tab, and click Certificates.
In the Certificates window, select the Trusted Root Certification Authorities tab.
To sort the certificates, click the Expiration Date column header.
Select any GTE CyberTrust certificates that have their expiration date in the past. You should be left with one GTE CyberTrust certificate that is valid.
Click Remove and, when asked for confirmation, click Yes.
After the expired certificates have been removed, please restart Nokia Ovi Suite and try signing into your Nokia account again.
I hope this helps.
Br
mahayv

I can not open ff4(after installed) with a note you cannot use the application "firefox. app" with this version of Mac OS X.

I had ff3, but I upgraded to ff4. But in process of upgrading to ff4 I almost 70 times of dragging from ff simbol to applications, I am so tired of repeating it, So I stopped. and as last step I dragged ff simbol from appplication to side ff simbol. Next day I tried re-download over it, But it happen same thing, it says "you cannot use application"firefox. app" with this version of Mac OS X."

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

XI Integration Engine- You cannot log on to system BS_SAP_R_3 with user XIR

Similar Messages

Maybe you are looking for