XI Integration in Netweaver Mobile 7.1

I saw in the Netweaver Mobile 7.1 Major Improvements Powerpoint Presentation that integration with XI is possible. How is this done?

Hi Deepika,
You will have to consume a webservice to create a proxy using SE80 tcode and create a object of type Enterprise service and then choose the option Service consumer. Then give the URL or File of the webservice you want to consume. Then a proxy object is created which needs to be activated. Following blogs gives an overview of calling a Enterprise Service from a BAPI. You can refer to the following blogs which gives an overview of calling enterprise service in a BAPI
Creation of proxy Object
/people/community.user/blog/2007/05/24/approach-to-mobilise-non-sap-application-using-sap-mi--step-1-creation-of-proxy-object
Calling a Proxy Object inside a BAPI.
/people/community.user/blog/2007/05/28/approach-to-mobilise-non-sap-application-using-sap-mi-step-3-creation-of-bapi-wrappers
I currently donot have any detailed documentation of the same.
Thanks...
Preetham

Similar Messages

Does SAP Netweaver Mobile support integration with devices like Intermec?

Hi All,
We have a scenario where the customer is currently using SAP Console based approach for RF transaction related requirement. The device used is Intermec CK31 for barcode scanning and updating the data in the SAP backend. Some example scenarios are Goods Issue & Scrap. Since the SAP Console based approach does not support Offline mode, the customer is interested in evaluating the option of using SAP Netweaver Mobile for the solution.
Related to this requirement, we have the following queries.
1) Does SAP Netweaver Mobile support Intermec CK31 device without a product like Mobile Factory. What are the pros and cons in this approach of using SAP Netweaver Mobile only? If yes, are there any documentation how this can be accomplished?
2) Are there simulators for Intermec scanning devices like Intermec CK31 to be used while application development?
3) Can Mobile Factory be used for implementing this requirement? Can it support offline scenarios without SAP Netweaver Mobile? Does Mobile Factory provide Simulators for the devices such as Intermec CK31 for application development?
An early response would be greatly appreciated as we are in the process of evaluating a right approach for the customeru2019s requirement and the same needs to be provided soon.
Thanks in advance.
Suresh

Hi,
Refer to note 1057759 for the delivered Drivers for Peripherals and devices supported in SAP DOE. This lists all the supported barcode scanners for SAP Netweaver Mobile. Those derivers are certified after testing to work only with that device and OS configuration.
Regards,
Suma

Question on netweaver mobile option

Hello friends
Right now we are using XI integration between our product and SAP tables.
Our sales team want to use the demo of our product while they are travelling which uses this XI integration.
I have been reading about SAP x Apps Mobile option.
Does this support the XI scenarios also?
In other words, how different is this netweaver mobile option when compared to the regular XI scenarios that we have configured? Does using this mobile option requires any configuration changes?
Your response will be highly appreciated.
Thanks
Ram

Hi Ram !!
SAP xApps Mobile / Mobile Infrastructure, as far as I know, is for offline connections. It requires to install a client in the mobile devices to work.
XI is used to integrate SAP and non-SAP systems, that means that you could use XI to expose SAP data and develop your own front-end as a client. If this client has for example a web interface, then if your mobile device has an internet browser, you could access that client from there.
e.g.
Mobile device (with browser/online connection) -> ASP.NET application -> HTTP/SOAP -> XI -> RFC -> SAP
Instead of an ASP.NET application you could develop a Mobile WebDynpro JAVA application (that is, J2EE instead of .NET, but device detection for proper rendering of UI) for the same.
It all depends if your mobile application is online or offline. If it is offline and all it access is SAP data, then you just can do it with SAP MI, if it is for online (SAP or non-SAP data), any combination can work, you also can use XI as a broker between SAP and your mobile platform.
Hope it helps.
Regards,
Matias
ps: please award points if helpful.

Is Netweaver Mobile still necessary with the latest SUP?

I am confused about how or if Netweaver Mobile fits into the architecture if you are using the latest version of SUP. I saw this thread (future Netweaver Mobile and SyBase Unwired Plataform) a few months ago and got the impression that it is no longer needed. I am assuming that if we bring SUP in-house, that we won't need to also standup Netweaver Mobile. Is this true?

Hi Timothy,
well, he is right in a way - but one thing: what is SUP DOE? There is no SUP DOE as such and there will not be as I was told here at TechEd by SAP representatives.
So: it is correct, NW Mobile will not be further developed.Bug fixing yes, but no further development as such. Perhaps it gets obsolete in the future, as SUP is getting better - okay. But it will always be there for the next years and if SAP wants to get rid of it, they need to give clients a way to migrate to another solution. So even there is no further dev it will not get switched off at some point in the future. And: with NWM7.3 we have a big development in NWM to allow a better integration with SUP out of the box.
So if you want to use CRM mobile, you need the following landscape to deploy it (for example):
1.) ECC Backend (your CRM Backend, off course you need this)
2.) Netweaver Mobile 7.3 (This is the DOE part, including ESDMA)
3.) Sybase SUP
Well, you need to connect SUP and NWM7.1 together. To do this you need to install a DOE-Connector in Sybase. The NWM7.3 contains the counter part to DOE-C which is the ESDMA stuff. This is now included in NWM7.3. If you run still NWM7.1 you need to install that piece of connector as a separate add on.
So to summ this up: the SAP representative was either unclear to you at this point or he should read the documentation again. Sorry I have to say it this way, but you definetly need NWM if you are running CRM and the DOC part will not be included in the SUP. We have seen the SUP development agenda for the next releases to come, there was nothing like that mentioned. Even better, the DOE-C will be included in standard sUP, which means out of the box you have a better ability to connect SUP to NWM and so to use the DOE.
By the way the same as I said for CRM is true for the new EAM Mobile solution from SAP and Mobile Sales as well. So all of these 3 apps use NWM, DOE-C and SUP. This is off course a big issue for some clients, cause the maintenance cost of the landscape increases due to the fact, that they need a new SUP-Server and can not switch off the NWM box.
On the other hand as said: if you are running a smaller scenario and have no need for CCMS integration, complex monitoring, enterprise device handling from the data side,...... then you will be absolutely happy in using SUP only. It will take some more time to integrate SUP really into the SAP world and extend it by some really needed features and enhance the monitoring abilities for the business for example.
Hope this does not confuse you too much.
Regards,
Oliver

Attachments Function Modules in SAP Netweaver Mobile 7.1

Google Traslator
Hi Experts,
I am currently developing an application on the SAP technology
Netweaver Mobile 7.1
I am in the process of setting BACKEND ADAPTER, model
data fields are used data type STRING and XSTRING. According to the
documentation, when using such data types, must be implemented
additional attachment function modules, diferent to Bapi wrappers. They function
modules are responsible for uploading and downloading of the fields in the
DOE.
In SAP Help, forums or on the same system, I can not find this type of function module and I would be very useful that they could send me an example.
Best Regards,
JM

Hi,
You need to have a separate table to store attachments in the backend.
In the DOE define the attribute as STRING(tick the text memo) This you have already done .
In the backend you will need another table where you will be storing the attachments.
Lets assume you have a notification table : In this define the field for headertext with the data type as CHAR and length 1
Create another table where you want to store the attachments:
You can have the fields as NOTIFICATION and HEADERTEXT. This headertext should have a datatype STRING. You can also have a field called attachment type to store whether it is HeaderText or Binary Memo.
Create a BAPI wrapper for getting the HEADERTEXT with importing parameter as NOTIFICATION and exporting HeaderText and a return parameter:
Here the source code:
SELECT SINGLE b~headertext INTO e_headertext
FROM <notification table> AS a
INNER JOIN <attachment table> AS b ON
borderid = aorderid
WHERE a~orderid = orderid AND
a~headertext = 'X' and
b~ATTCHTYP = 'HEDTXT'.
Now in the DOE : give this function module name in the attachment Function module. SAVE (very important)
After doing the mapping go to the attachment tab and do the mapping with the attachment function module.
save and activate the backend adapter.
execute SDOE_LOAD.
Go to SE11: there should be a table starting <cds table name>ending with _TM.
Create an application in the similar way. No extra code required.
Regards,
Sunaina Reddy T

Difference between SAP Netweaver PI and SAP Netweaver Mobile and SAP DOE

HI,
I am learning Sybase Unwired Platform and SAP PI 7.1. I was going through SUP and SAP configuration documentation. I am really confused at one point. Does this SAP Netweaver PI 7.1 and SAP Netweaver Mobile 7.1 are same?. What is these DOE connector? is these DOE and SAP Netweaver Mobile 7.1are same? .
I have gone through various documents. but still i am very much confused. I am very much new to this platforms.
Can any one please help me in above topics.

Yes latest version is Netweaver mobile 7.1. and in one of the documentation of Netweaver 7.3 it is said that,
to download the non-ABAP software that is relevant for SAP NetWeaver Mobile 7.3.
http://service.sap.com/swdc --> Downloads --> Support Packages and Patches --> Support Packages and Patched u2014 Entry by Application Group --> SAP NetWeaver and complementary products --> SAP NETWEAVER MOBILE --> SAP NETWEAVER MOBILE 7.3 --> Entry by Component --> Mobile Client --> NW MOBILE CLIENT SETUP 7.3 .
Actually my problem is, I am unable to get DOE Setup.exe file. I am able to download only .SAR file. If i configure SUP with SAP Netweaver mobile 7.1. i need to install DOE seperatly.
In one of the forum, it is said that
if we want to use CRM mobile, we need the following landscape to deploy it (for example):
1.) ECC Backend (your CRM Backend, off course you need this)
2.) Netweaver Mobile 7.3 (This is the DOE part, including ESDMA)
3.) Sybase SUP
Well, you need to connect SUP and NWM7.1 together. To do this you need to install a DOE-Connector in Sybase. The NWM7.3 contains the counter part to DOE-C which is the ESDMA stuff. This is now included in NWM7.3. If you run still NWM7.1 you need to install that piece of connector as a separate add on.
This is where i got confused and was searching for NWM7.3.
Thanks
phanidps

Training for SAP NetWeaver Mobile 7.1

SAP NetWeaver Mobile 7.1 is now in unrestricted shipment.
How can you learn the details and start the development ?
SAP Education has launched the official training offering: "MOB100 SAP NetWeaver Mobile 7.1 - Development and Administration". To sign up for a training, either search for it in the [SAP Training catalog|http://www.sap.com/services/education/index.epx] or check out the [currently offered trainings in Brussels/Belgium|https://service.education.sap.com/sap/bc/bsp/sap/hcm_learning/trainingtype.htm?sap-params=cGx2YXI9MDEmb3R5cGU9RCZvYmppZD03MDA2NjQyMw%3d%3d].
Of course you can also always start with our elearnings provided in the SDN:
[SAP NetWeaver Mobile 7.1 New Development Cycle and Tools |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/204fc387-6646-2a10-99b7-bba030bc3f68]
[SAP NetWeaver Mobile 7.1 Architecture Overview and Runtime |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e048e20c-7246-2a10-e8a5-8b2b78b5b994]
Enjoy !
Stefan
Edited by: Stefan Wawrzinek on Dec 9, 2008 6:01 PM

Hello mobile community,
Workshop in Walldorf next week still have seats available.
Take you chance and register now.
Regards,
Wolfgang

Enterprise service in SAP Netweaver mobile application

I want to use an enterprise service in a mobile web dynpro application using SAp Netweaver Mobile 7.1.Is it possible

Hi Pablo,
We are actually working with CE. Here we checked the following configurations:
1. Network connectivity from your IDE (Window>preferences>general-->network connections).
2. Http proxy settings of the server (http://<host>:<port>/nwa/middleware-settings)
I think the problem is with your server's http proxy settings.
Hope it helps.
Regards,
Srinivasan Subbiah

MAM development on SAP NetWeaver Mobile 7.1?

Hello world
I did notice that SAP has released SAP NetWeaver Mobile 7.1. I was of course very curious if this would (finally) make MAM25 developments possible in the new SAP NetWeaver (Mobile ) Developer Studio 7.1, because the old SAP NetWeaver Developer Studio 7.0 is based on Eclipse 2.X while the new one is based on Eclipse 3.3 (which has some advantages compared to Eclipse 2.X).
So I did download SAP NetWeaver Developer Studio 7.1 and SAP NetWeaver Mobile 7.1, and installed both of them on my system. I was positively surprised when I noticed a Mobile Infrastructure perspective. So I did download our customized MAM25 source code from the CVS server and I tried to let it compile and run on SAP NetWeaver Mobile Developer Studio 7.1.
Compiling was not a problem: after including some required JAR files, the code did compile successfully, however when trying to export the project, it seemed that the JSP files were not compiled, however I did put the tick mark at the Add JSP as compiled classes option. In my NetWeaver Developer, a folder $jsp was created, but with nothing inside. And in the generated WAR-file, I couldn't find any compiled JSP file as well...
In the 7.0 version, a file called mam25.jar was created and putted into the lib folder in the war archive file, which contained all the class files. This file was not created with version 7.1.
When trying to run the MAM from within NetWeaver Mobile Developer Studio 7.1, I did get the following exception when launching:
java.lang.NoClassDefFoundError: com/sap/tc/mobile/cfs/startup/Startup
Caused by: java.lang.ClassNotFoundException: com.sap.tc.mobile.cfs.startup.Startup
Is there anyone who can tell me whether or not SAP NetWeaver Mobile Developer studio 7.1 is able to compile, generate and run the MAM25 source? If not, why is there a perspective Mobile Infrastructure included?
If it is compatible, does anyone have an idea why it didn't work with me?
Thanks for your help!
Best regards,
Diederik

Hi all,
First of all, thanks for all the information!
I think there is a little misunderstanding, or maybe I am wrong
SAP NetWeaver is the web-application you can use to analyze, administrate, etc... your mobile applications?
I am actually talking about the SAP NetWeaver Developer Studio 7.1, which is in fact just an extended Eclipse environment. There is some kind of mobile update pack which you can find here: [SAP NetWeaver Mobile 7.1 SP3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0846cb5-59ec-2a10-46a2-cff9cd9b8fc3]
My question was if you can maintain and develop in JAVA your MAM25 application with this version of the Netweaver Developer Studio? I did notice a perspective Mobile Infrastructure as in version 7.0, and I can compile the JAVA code, but I can't run the application (see error in original posting) and it seems that no JAVA files are generated from the JSP files.
I guess it is just a matter of making the plugins compatible for Eclipse 3.X, because the plugin system of Eclipse 2.X is not compatible with the plugin system of Eclipse 3.X. But because of the Mobile Infrastructure perspective that I did notice, I was thinking that this was done. But this seems not to be the case, or I did do something wrong...
So the only question is: can I use SAP NetWeaver Developer Studio 7.1 (aka Eclipse 3.X) to develop in JAVA the MAM25 application?
Thanks for the help!
Best regards,
Diederik

Upgrade Mobile 2.5 to SAP Netweaver Mobile 7.1

Hi,
We have to create the file .SDA with NWDS following the steps of the Sap Note 1548566 - MAM Application Start Error,then deployment the application in Sap Netweaver Mobile 7.1 Cliente, but when we try to start the application it show us the follow error:
Error: 500
Location: /campofrioapp/campofrioapp/Menu.do
Internal Servlet Error:
javax.servlet.ServletException: cannot find message associated with key : dispatcher.forwardException
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:238)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)
     at index._jspService(index.java:62)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Unknown Source)
Could you help us to solve this error please?
Best regards
Fernando

Hi,
most likely your precompilation of JSP files did not work. While creating JSPs, check if they are really there - or if the resulting Java code is empty.
In that case you would get this error.
Hope this helps.
Regards,
Oliver

I cant start SAP NetWeaver Mobile 7.1

Hello!
I explain my situation.
I downloaded SAP NWM 7.1 from here
http://www.sdn.sap.com/irj/sdn/downloads?rid=/library/uuid/c0846cb5-59ec-2a10-46a2-cff9cd9b8fc3
And downloaded next creme version:
CrE-ME412_ARM_CE42_PPC
I just follow the instruction from the next post:
Basicly,
1.Install Crème cab file
2.Install MINDB cab file
3.Install pda_runtime_wince.cab
4.Install pda_eswt_container.cab
When i start the NWM its appear a message "Creme is Running..." but next nothinh happens.
I see my log file and it says:
<?xml version="1.0" encoding="utf-8"?>
<l>
<h n="/MIlog/trace_6.trc" v="1.5" d="2010-01-03" t="19:25:26">
</h>
<rs>
<r id="1262543124522" t="19:25:24" d="2010-01-03" s="E" c="000" u="" g="" m="Error creating initial tables --> {0}">
<f n="ThreadName" v="com.sap.tc.mobile.cfs.startup.pda.Startup"></f>
</r>
<r id="1262543124607" t="19:25:24" d="2010-01-03" s="E" c="000" u="" g="" m="Error dropping initial tables --> {0}">
<f n="ThreadName" v="com.sap.tc.mobile.cfs.startup.pda.Startup"></f>
</r>
<r id="1262543126252" t="19:25:26" d="2010-01-03" s="I" c="000" u="" g="" m="Logging initialized">
<f n="LocationName" v=" (com.sap.tc.mobile.logging.impl.FileLogger:)"></f>
<f n="ThreadName" v="com.sap.tc.mobile.cfs.startup.pda.Startup"></f>
</r>
<r id="1262543126255" t="19:25:26" d="2010-01-03" s="I" c="000" u="" g="" m="Logging initialized">
<f n="LocationName" v=" (com.sap.tc.mobile.logging.impl.FileLogger:)"></f>
<f n="ThreadName" v="com.sap.tc.mobile.cfs.startup.pda.Startup"></f>
</r>
<r id="1262543128563" t="19:25:28" d="2010-01-03" s="E" c="000" u="" g="" m="Error loading metadata --> {0}">
<f n="ThreadName" v="com.sap.tc.mobile.cfs.startup.pda.Startup"></f>
</r>
<r id="1262543128683" t="19:25:28" d="2010-01-03" s="F" c="000" u="" g="" m="Cannot initialize framework --> {0}">
<f n="ThreadName" v="com.sap.tc.mobile.cfs.startup.pda.Startup"></f>
</r>
I'm using a HTC Diamond device, with Windows Mobile 6.1
I hope i says enough information, and somebody can help me.
Thank you so much for your time.

Hello ,
Prblem is on your windows mobile 6.0 / 6.1. WM 6.0 /6.1 is not officially supported by SAP MI client yet. But eventhough we were able to bring up the MI client on WM 6.0 . You need to install the correct CrEme version using the below download link:
http://www.nsicom.com/Default.aspx?tabname=me
Check the below two OSS for ore details :
SAP Note 772334 - Download of a CrEme-Cab file with
permanent license
SAP Note 720225 - Which version of CrEme do I have to
install on which device?
You have to use the CrEme 4.1.2 for Netweaver Mobile 7.1 .
Alos you need to use the correct MI client CAB file for the MI client installation.
We used MI Client SP 13 version for Windows Mobile 6.0 or try SP 20 . Either one of them will work.
Hope this will resolve your issue .
Thanks,
Greetson

Accessing peripheral devices using NetWeaver Mobile 7.1 application

Hi,
I'm developing an occasionally connected application for handheld devices using NetWeaver Mobile 7.1. From my application how can I access other peripheral devices (for example: WebCam) to capture the pictures.
Suggest me the ways to access the peripheral devices (WebCam) from my NetWeaver Mobile application.
Thanks in advance.
Regards,
DVR.

Hi Vinodh,
Please refer to SAP Note: 1057759 for getting the list of peripheral input/output device drivers supported in SAP Netweaver Mobile 7.1
You can also go through the help portal link on how to use peripheral devices in mobile application.
http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm
In case you want to use another peripheral device like Webcam not supported, then you will have to take care of this in the application code itself. You can use JNI etc to talk to drivers like in a normal java application.
Regards,
Nipun

ROI of implementing SAP Netweaver Mobile 7.1

How can we calculate ROI of NW mobile 7.1 implementation?
In what areas can SAP Netweaver Mobile 7.1 ensure savings/ reduced expenditure?
Some example areas are:
1. Paper work
2. Operational Cost (Eliminated Data Updation time)

Hi,
I dont think this link gives the exact answer for your question but it definitely helps you to calculate the same or atleast gives you an idea about what sap netweaver mobile 7.1 is about and the benefits it offers and what can be achieved with it.
SAP NetWeaver Mobile 7.1
Best Regards,
Siva.

SAP EHP1 FOR NetWeaver Mobile 7.1

Hi,
We plan to install a server for NetWeaver Mobile but wonder to install SAP EHP1 FOR NetWeaver Mobile 7.1 or SAP FOR NetWeaver Mobile 7.1. Any enhancement for the ehp1 package and limitation? Thanks,

Hi,
as Siva already mentioned - just to add the screen - if you enter service.sap.com/swdc and drill down to download the EHP support package for mobile, you get the following warning right at the top:
Important Note:
SAP enhancement package 1 for SAP NetWeaver Mobile 7.1 contains changes mainly targeted for use by the mobile applications SAP Mobile Defense & Security 1.6 and SAP Mobile Direct Store Delivery 4.0. Therefore SAP recommends to install SAP enhancement package 1 for SAP NetWeaver Mobile 7.1 only if you want to use one of the corresponding applications SAP Mobile Defense & Security 1.6 or SAP Mobile Direct Store Delivery 4.0.
Due to that, you should go with usual MI7.1 stack.
Hope this helps.
Regards,
Oliver

Query regarding SAP Netweaver Mobile 7.1

Hello Experts !
1. What is the difference between SAP Netweaver Developer Stuido and SAP Netweaver Mobile 7.1 or higher version ?
2. For developing applications related to SAP Mobility which one is the better option ?
3. What are the sources available to learn above given software ?
Regards,
Vaibhav

Hello,
For more information on NW Mobile 7.1, please refer to following link:
<http://help.sap.com/saphelp_nwmobile71/helpdata/EN/63/8bf764d6be43dbbc59934a5c6e5175/frameset.htm>
For the application development on Laptop Client(NW mobile 7.3) , refer the following link:
<http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0a1ff2c-aa0e-2e10-f5a7-faa4bfecb6c0>
For OCA Client(NW mobile 7.3) , refer the following :
<http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40fcc34f-af0e-2e10-41b3-f1f60bcb5a7f>
Regards,
Lakshmi
Edited by: Lakshmi Reddi on Apr 25, 2011 8:17 AM

XI Integration in Netweaver Mobile 7.1

Similar Messages

Maybe you are looking for