XI Integration scenario for material replication from SRM to SRM-MDM

Hi Guys,
We are working with the following landscape:
SRM Server 5.5
ECC 6.0
SRM-MDM 5.5 SP6
PI 2005_1_700 SP0006
I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
In XI we are trying to configure this scenario. For this we have imported the following XI Content:
- SAP SRM Server 5.5
- SAP SRM-MDM 2.0
We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
"Software component version with GUID XXXXXXXXXX... does not exists"
Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory  gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
Thx In advance.
Regards,
Wouter

Hi,
>"Software component version with GUID XXXXXXXXXX... does not exists"
try updating SLD (CIM DATA) with the latest patch available
Regards,
Michal KRawczyk

Similar Messages

  • Material replication from ECC to SRM

    Dear SRM 7.0 Experts,
    We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
    I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
    Regds,
    Cb

    Have you checked the outbound queue in backend R/3 system  ?
    Have you defined the additional user in CRMCONSUM table apart from the CRM user? 
    Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
    described in SAP Note 430980. See also SAP Note 720819.
    Hope this helps you.
    Regards
    Abhijeet

  • Material Replication from ECC to SRM 7.0

    Hi Experts,
    I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
    Errors:
    Hierarchy for material types does not exist
    (Before materials are imported from the ERP system, the material types from the  ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
    MATERIAL: Object will not be loaded
    Pl do the needful.
    Regards
    Mohan

    Hi  Pl check whether you follwed these steps are not.
    Hi find below for the product cat
    Steps to create the product category in SRM:
    1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
    2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
    3) Do a test and check if the product category is available for procurement in SC.
    Regards,
    Satish

  • Why we need crm middleware for material replication?

    Hi Experts,
    Why we need CRM middleware for material replication from ECC to SRM when we can do the vendor replication from ECC to SRM with ABAP report? IS there any technical limitation?
    Thanks and regards,
    Ranjan

    Hello,
    Vendors and locations, for example, you can replicate from ECC to SRM using ABAP reports.
    However, if you want to replicate the following information, you should use the middleware:
    - DNL-CUST-BASIS3 - Basis CRM online
    - DNL-CUST-PROD0 - Material number conversions
    - DNL-CUST-PROD1 - Product : categories
    - DNL_CUST_SRVMAS - Customizing: Service Master
    - MATERIAL - R/3 Material Master
    - SERVICE_MASTER - R/3 Service Master
    Check note 872533. It provides more information.
    Regards,
    Ricardo

  • SRM 7.0 - CRM middleware settigns for material replication

    Hello SRM Guru's
    Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
    Thanks.
    Regards,
    Magesh.

    Hi,
    Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
    Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
    SDN has search functions. You can find solutions for your issue.
    Regards,
    Masa

  • Problems during material replication from SRM 5.0 to ECC 6.0

    Hello all,
    I tried to replicate material master from ECC to SRM but i am not successful.
    System can able to replicate all the product categories but not the material.
    System showing the process is done and it is showing green light when i drilldown.
    Can any one ever had experienced such a problem?
    Thank you
    mahesh

    Hi
    <b><u>Please go through this -></u></b>
    <b>Note 884208 - Unusable Middleware objects are provided</b>
    <b>Note 872533 - FAQ - Middleware</b>
    <u>As mentioned in SAP OSS note 872533, DNL_CUST_BASIS3 is obsolete, therefore, Please skip the download of the object DNL_CUST_BASIS3 and continue with DNL_CUST_PROD0, DNL_CUST_PROD1 and MATERIAL.</u>
    Following OSS note 872533, DNL_CUST_BASIS3 is obsolete.(Though OSS note mention DNL_CUST BASIS3 is obsolete for SRM 5.0, However, this customizing object does help in synchronizing the UOM from R/3 to SRM.)
    However, it seems to still work in SRM50...
    <u>Related link -></u>
    Re: UNIT OF MEASAUREMENT
    As an alternative :
    For ISO codes synchronisation, you can go to transaction CUNI -> ISO and then select "utilities" -> "adjustment".
    A pop-up will be displayed to select the backend code
    Do let me know.
    Regards
    - Atul

  • Why do we need to define RFC destination and user for material replication

    Dear Experts,
    why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
    regards,
    Ranjan

    Hello,
    As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
    You can refer to note 720819.
    Regards,
    Ricardo

  • Integration Scenario for Enhanced Interface determination

    Hello Friends,
    I am modeling the integration scenario for 1:N Mapping case, that is 1 outbound Interface and  3 inbound Interfaces. I am finding difficultly in modeling the integration scenario for enhanced interface determination.
    Kindly provide me inputs in configuring this case.
    Thanks

    Have you look this help?
    http://help.sap.com/saphelp_nw70/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
    2.      Integration Directory: Define the interface determination.
    Note the following:
    ○     The outbound interface of the multi-mapping must be entered as the sender interface in the key of the interface determination.
    ○     The interface determination type must be set to Enhanced.
    ○     Select the multi-mapping you defined previously from the Integration Repository.
    To select the interface mapping, use the input help ().
    The target interfaces of the interface mapping are displayed in the Inbound Interfaces frame.
    The number of messages (for an inbound interface) created in the mapping step is displayed in the Occurrence column.

  • SMOEAC site settings for material replication

    SRM Gurus,
    While doing the settings for material replication, in SMOEAC transaction
    I am trying to create site 'SRM' of type CRM, In the site attributes if I enter RFC destination 'SRMCLNT001' and click on get values I am getting the following message "RFC destination SRMCLNT001 does not exist. No valid backend system".
    Can someone please suggest what I need to check/configure to fix this issue?
    Info:
    R/3 side : RFC destination SRMCLNT001 (for connecting to SRM 5.0 system) created and remote logon tested OK.
    Completed all CRM* table settings
    SRM side: RFC destination R3CLNT800 (for connecting to ECC 6.0) created and remote logon tested OK
    Thanks,
    Arun

    Make sure you have created the RFC destination in SRM also. You need to create the following:
    RFC destination of SRM in SRM and in R/3.
    RFC destination of R/3 in R/3 and SRM.
    Regards, IA

  • Problem on Material Replication from R/3 to EBP

    Hi friends,
        I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
    Thanx in advance.
    Raj

    Hi Ahmed,
        Could you please elaborate. I am getting runtime error as 'Message_Type_X' (The current application triggered as termination with a short dump).
    Thanks
    Raj

  • Want a step by step scenario for sending file from PCK to XI to other sys.

    Hi all
    Want a step by step scenario for sending file from PCK to XI to other system
    i just want to check the flow of messages from PCK to XI by doing file to file scenario.
    Thanks

    Hi-
    Check this links
    http://help.sap.com/saphelp_nw04/helpdata/en/32/92e5bced6cb441af4360cfcb8142f3/frameset.htm
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4256 [original link is broken] [original link is broken] [original link is broken] [original link is broken]

  • Documentation on Integration Scenarios for BAS-PV and DES

    Hi,
    Is there any documentation on the Integration Scenarios for BAS Postal Validation, and Duplicate-Check and Error-Tolerant Search for ECC 5.0?
    What we have is only for R3 4.6, and the behavior of business partners for ECC 5.0 is very much different as compared to R3 4.6.
    Thanks!

    The newest release of the sharepoint kit called internally (ipoint) should work fine with java infoview. I haven't set this up my self and you may need to open an incident with support to verify if Edge supports the newest sharepoint kit.
    Regards,
    Tim

  • Read Combination segments for material account from item level

    Dear Value Consultant,
    Read Combination segments for material account from item level
    "For any inventory transactions"
    Is there is away to read the material account from item level , to affect the real combination segments not general combinations segments from item master or organization
    Business Impacts :
    All inventory transaction for all item will affect the same combination segments for material accounts
    After I transfer to GL, This not helps me to differentiate the balance for material value is related to any item category
    Also for Budget Wise , I want to map the budget on combination level for materials accounts , and this not actualize without affect the real combination for material accounts in subledger ,
    Thanks

    I have not seen any client asking for this, but you can consider Costing Hooks to create your own accounting engine for inventory transactions. Hope you are taalking about standard costing. In such case, costing hooks are available in Oracle for you to write your own accounting.
    Even better in R12, you can do this with setup in SLA.
    Thanks
    Nagamohan

  • Material Replication from ERP to MDM (SRM-MDM Catalog)

    Hi Experts,
    I would like to replicate the material master from the ERP system into the MDM (SRM-MDM Catalog)?
    I don't want to replicate the materials from ERP to SRM, and then from SRM to MDM.
    1. Does ERP provide any transactions to achieve this ( like MECCM / MDM_CLNT_EXTR) ?
    2. Is there a necessity to use the PI system in these communications? If so, what Integration Scenario I need to use in PI Enterprise Repository?
    3. Any further changes to Materials in the ERP system should automatically replicate into the MDM system.
    From SRM, I create SC with items from Materials in MDM.
    Please let me know if you require more information.
    Thanks
    Kasee

    Dear Krupa,
    Thank you for your quick reply.
    So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
    In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
    Thanks in advance.
    Regards,
    Andreia

  • Material replication from R/3 to SRM - Issue with Material group

    Hello All,
                      I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
    I am using a Ztable to map r/3 material group to SRM material group(Product category).
    For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi.  its working fine.
    In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
    I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
    I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
    I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
    I am doing my testing using the following steps.
    1. change the material descriptioni in MM02 in R/3.
    2. An item is displayed in the queue in SMQ2 in SRM.
    3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
       that didnt work.
       also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
    4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
    can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
    Thanks
    Sathish PM

    Hi find below for the product cat
    Steps to create the product category in SRM:
    1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
    2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
    3) Do a test and check if the product category is available for procurement in SC.
    Regards,
    Satish

Maybe you are looking for

  • The difference between "ipsec-isakmp dynamic" and "ipsec-isakmp profile" cyrpto map configs

    The IOS documentation for the crypto map command gives the syntax as crypto map [ipv6] map-name seq-num [ ipsec-isakmp [ dynamic dynamic-map-name | discover | profile profile-name ] ] I have a 881w ISR. In what different situations do we use the ipse

  • How to get the execution time of a Discoverer Report from qpp_stats table

    Hello by reading some threads on this forum I became aware of the information stored in eul5_qpp_stats table. I would like to know if I can use this table to determine the execution time of a worksheet. In particular it looks like the field qs_act_el

  • Dangling Meta Character*

    Hi I am getting following exception while executing this statement.can any body give anyt idea and how to fix this problem? String sbr="this is kdfdanth redd*t from fdgkanth"; String bol=sbr.replaceAll("*"," "); System.out.println("********* " + bol)

  • DDL and DML

    hey the method executeQuery will return ResultSet then i can use this resultSet to show result but with this method i can't excute the ddl commands (del , insert,..etc) executeUpdate can do both , but will not return ResultSet that i use to show resu

  • AddNode cannot find Virtual Host name

    Hi,all; I want to replace a server in RAC for example RAC1. at first,I deleted node RAC1,this step is total clean out all information of RAC1 in the cluster. then prepare new machine of RAC1 for cluster install. When I run addNode.sh in RAC2 to re-ad