Xi interview quetions
pls send me interview questions n real time questions
N.B.,
this is not the appropriate forum for requesting interview questions.
The forum's objective is to share knowledge and experience of using XI/PI.
SDN PI/XI Forum Moderator
Hi
In addition to above ....
they may ask you like
1) What the business systems used ? (Note this is SLD related)
2) They will give you scenario and aks you howmany BS,TS and logical names
you will create
3) Some more things on SWC versions, SAP R/3 Settings like pushing IDOC
receive IDOC ...etc
4) Naming conventions you used ? for BS, LS,TS.....
5) Why sender IDOC,HTTP adpter not required? explain in detail ?
6) What adapters you used ? Tell all the parameters?
7) Any java mapping written? how to write? Packages? UDF....
8) Mapping functions details...like node functions etc....
I think these are the things they may stress Max....
All the Best
Regards
Prasad
Similar Messages
-
Please send me some interview quetions in ALE /IDOC's
please send me some interview qutions in ALE /IDOC'c it will help me a lot
Hi
just vivsit this sdn link you will get all the interview questions
The specified item was not found.
thanks.
reward if helpful
vivekanand -
Hi All,
I know most of the question asked in Interview for XI.
<b>But in interview they give us scenerio and we have to solve them. Can anyone help me wat kind of scenario they asked to give solution for.</b>Regards
HemantHi
In addition to above ....
they may ask you like
1) What the business systems used ? (Note this is SLD related)
2) They will give you scenario and aks you howmany BS,TS and logical names
you will create
3) Some more things on SWC versions, SAP R/3 Settings like pushing IDOC
receive IDOC ...etc
4) Naming conventions you used ? for BS, LS,TS.....
5) Why sender IDOC,HTTP adpter not required? explain in detail ?
6) What adapters you used ? Tell all the parameters?
7) Any java mapping written? how to write? Packages? UDF....
8) Mapping functions details...like node functions etc....
I think these are the things they may stress Max....
All the Best
Regards
Prasad -
In MARA table there is no material descriop feild, When i display MARA in SE16 the material descrtion is displaying, how is possible.
The material description in MAKT table.
What is the logic behind.Hi,
at any table you can link a "text" table.
You can see the link between the data table and the text table with transaction SE11, via the menu path Goto -> Text Table
In this way you can see the text table which must have as key fields all the key fields of the data table plus the field SPRAS.
Ciao, Antonino Musciumarra -
7 months experinced questions.
what can be interview quetions for as a junior DBA if I am working in maintenance.?
Plz reply soon.
thanks in advance.1 When i tried to delete my test workbook in sand box. it poped up a message giving me two options:
Only delete references to xxx from this view.
Say if you are deleting the view from your favourites - Use first option.
Delete xxx permanently, along will all references.
Will delete the workbook from favourites and if it is any roles as well.
What is the meaning of the above two options? and which one is safe to choose?
Depends on what you want to do.
2. How to insert multiple existing queries in the same workbook?
Use the analysis grid, navigation panes and filters - You can insert new queries in Design mode.
Search SDN for more..
Execute Query 1.
Save Workbook ( Using BEx Tool bar )
Open Sheet 2
For the second query :
Go to Design Mode first ( Toolbar options - Blue coloured Letter A underlined in Red ).
Insert Analysis Grid - to insert query - Select ur Data Provider /Query
Comeout of Design Mode
Save Workbook
You may have to insert Buttons for " Header ", " Last Refreshed ", " Status of Data "....
Insert navigation pane/filters for free chars...
Bex problem
3. Fiscal year/period has the format 001/2008. i did not understand
this format. What is it can anybody explain me in detial about this?
001 - January
2008 - Year
Fiscal Year = YYYY
Fiscal Period = YYYYMM
Posting Period = MM -
Send me notes of ALV, DAILOG PROGRAMMING
hi friends,
this is shafeeq plz send me the notes of ALV, DAILOG PROGRAMMING WITH SOME interview quetions also
MY MAIL ID [email protected]
accept my thanks in advance
regards
shafeeqHi,
dialog programming.
Refer to the documentation @
<u>http://help.sap.com/saphelp_47x200/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm</u>
<u>http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm</u>
<b>ALV</b>
check these links,
About ALV:
http://www.geocities.com/mpioud/Abap_programs.html
ALV Group Heading
http://www.sap-img.com/fu037.htm
and few more,
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
<b>Interview questions</b>.
refer this one...
/message/2042837#2042837 [original link is broken]
Please check these links.
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://sap.ittoolbox.com/documents/document.asp?i=3240
http://www.techinterviews.com/?p=198
Regards
Anver
if hlped pls mark points -
Hi SDNer
.I would like to go for certification please help me with Q&A or EBOOK
Thank your
shankarHi
use these thread for lot of qus
/message/3476401#3476401 [original link is broken]
XI Interview questions
Latest XI Interview questions ?
/message/5219232#5219232 [original link is broken]
Re: XI interview questions all links pls....
Re: Interview questions on XI .......Pl help me urgent
Interview Quetions XI
/message/1479240#1479240 [original link is broken] -
Please send some Important Quetions from REPORTS
i have a interview in TCS
Please send some Important Quetions from REPORTS,SMARTFORMS,ALE/IDOC'sHi,
Here are the links
http://www.sap-img.com/abap/important-abap-faq.htm
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
Reward points for useful Answers
Regards
Sudheer -
Send some Quetions on ALE /IDoc
Send some Quetions on ALE /IDoc
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/2a6543507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://www.erpgenie.com/sapgenie/docs/ale_whitepaper.doc
http://www.idocs.de/EDI/HTML/IDocBook.htm
http://www.sappoint.com/faq/faqss.pdf
http://www.geocities.com/sap_interviewquestions/
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.sapgenie.com/faq/abap.htm
http://www.techinterviews.com/?p=198
http://www.onestopsap.com/interview-Question/edi/
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://www.sapabapfaqs.blogspot.com
http://www.sap-basis-abap.com/abap/sapscript-faq.htm
http://searchsap.techtarget.com/general/0,295582,sid21_gci1110010,00.html
http://searchsap.techtarget.com/ateAnswers/0,289620,sid21_tax294895,00.html
http://www.sappoint.com/faq/faqss.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDEDI/SDEDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESIDOCXML/BCFESIDOCXMLSTR.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDED/BCFESDED.pdf
For inbound idoc in partner profiles if you set trigger immediately for a message type , whenever idoc comes from middleware , it will be processed automatically . for process success idoc status will become 53, if it is failed idoc status becomes 51.
at partner profiles if idoc process selected as process through background program , whenever idoc comes from middleware it goes to 64 status. for these idoc's we need to schedule RBDAPP01 program to process 64 status idoc's or we can process these idoc's from BD87 transaction
Check these links:
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/72/c18eff546a11d182cc0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/9c/2744f5fa7464429a13345be4050fb6/frameset.htm
http://www.sappoint.com/ppt/ale.ppt
below details might help you.
WE09 / WE02 IDoc lists according to content. View IDocs via specific IDoc number or business application detail contained within the contents of a segment.
WE05 View IDocs
WE19 EDI test tool. Use to test inbound Function module changes.
WE20 Partner profile configuration. Add partner detail together with inbound and outbound relationships. We also incorporate message control on the outbound IDocs. Utilize the organizational units to trap functional errors for further processing
WE30 Create IDoc extension type
WE31 Segment create
WE57 Assign function module to logical message and IDoc type
WE60 IDoc type documentation tool
WE82 Link Release detail to Extension IDoc Type
BD55 Conversion rule user exit. Link conversion rule user exit to the different system \ partner combinations
BD87 Reprocess IDocs in error or waiting for action. (Both inbound and outbound in 4.6. Use BD88 in prior versions)
BALA ALE Application Distribution
BALM ALE Master Data Distribution
WEDI - main transaction for all ALE settings -
Can you help me on these 6 SAP BW interview questions?
Hi,
Can you help me get a better understanding of the expectations in the following interview questions?
Please explain them in your on words and if you think there is an additional information, you may provide the link but I am more interested in your own words and the typical things to say:
1. What is your performance tuning experience (discussion is on SAP BW)?
2. What is your experience with SAP BW change control?
3. You will have to ensure data integrity, adherence to standards and process excellence. What is your experience?
4. What exactly is entailed in a full-lifecycle SAP BW project? When can one say that she has 3 full-lifecycle SAP BW project experience.
5. You will be responsible for working with business to develop business intelligence metrics and analytics. What is expected to be discussed on business intelligence metrics and analytics.?
6. You will be responsible for designing road-map for data warehouse implementation and growth. What is your experience?
ThanksAmanda,
All the questions posed have a rider to it mentioning 'Your Experience' - I am not very sure if we can tell you what your experience has been...
My 0.02
Arun -
Hi Friends,
I was face some Interview.
Please send answers to the questions?
How many data Fields and key fields we can create in DSO?
You can overwrite key fields or Data Fields?
Which up date we use in Delta queue extraction( v1 or v2 or v3)
Which message we get when transported request is failed?
what is the Structural difference between Infoucbe and DSO
Data Loading is taking huge time when we extract data from source system to BI system/ how to solve?(Before it took 3-4 Hours now data loading takes 4 days)What is the difference between Display Attribute and
Navigational Attribute? How to make display attribute and navigational
attribute?
How to load flat file data?
How to load Hierarchy file data?
What is HACR?
How to maintain HACR?
If any issue in HACR then how to resolve the issue?
What is Baby Cube?
Why we are creating Aggregates?
What is the use of Aggregates?
Is there
any particular field on that we can create Aggregates or we can maintain
Aggregate on any field?
What is
the different DSO available? And what is the difference between those DSO?
What is
replacement path?
What are
the extractor types?
• Application Specific
o BW Content FI, HR, CO, SAP CRM, LO Cockpit
o Customer-Generated Extractors
LIS, FI-SL, CO-PA
• Cross Application (Generic Extractors)
o DB View, InfoSet, Function Module
2. What are the steps involved in LO Extraction?
• The steps are:
o RSA5 Select the DataSources
o LBWE Maintain DataSources and Activate Extract Structures
o LBWG Delete Setup Tables
o 0LI*BW Setup tables
o RSA3 Check extraction and the data in Setup tables
o LBWQ Check the extraction queue
o LBWF Log for LO Extract Structures
o RSA7 BW Delta
Queue Monitor
3. How to create a connection with LIS InfoStructures?
• LBW0 Connecting LIS InfoStructures to BW
4. What is the difference between ODS and InfoCube and MultiProvider?
• ODS: Provides granular data, allows overwrite and data is in transparent
tables, ideal for drilldown and RRI.
• CUBE: Follows the star schema, we can only append data, ideal for primary
reporting.
• MultiProvider: Does not have physical data. It allows to access data from
different InfoProviders (Cube, ODS, InfoObject). It is also preferred for
reporting.
5. What are Start routines, Transfer routines and Update routines?
• Start Routines: The start routine is run for each DataPackage after the data
has been written to the PSA and before the transfer rules have been executed.
It allows complex computations for a key figure or a characteristic. It has no
return value. Its purpose is to execute preliminary calculations and to store
them in global DataStructures. This structure or table can be accessed in the
other routines. The entire DataPackage in the transfer structure format is used
as a parameter for the routine.
• Transfer / Update Routines: They are defined at the InfoObject level. It is
like the Start Routine. It is independent of the DataSource. We can use this to
define Global Data and Global Checks.
6. What is the difference between start routine and update routine, when, how
and why are they called?
• Start routine can be used to access InfoPackage while update routines are
used while updating the Data Targets.
7. What is the table that is used in start routines?
• Always the table structure will be the structure of an ODS or InfoCube. For
example if it is an ODS then active table structure will be the table.
8. Explain how you used Start routines in your project?
• Start routines are used for mass processing of records. In start routine all
the records of DataPackage is available for processing. So we can process all
these records together in start routine. In one of scenario, we wanted to apply
size % to the forecast data. For example if material M1 is forecasted to say
100 in May. Then after applying size %(Small 20%, Medium 40%, Large 20%, Extra
Large 20%), we wanted to have 4 records against one single record that is
coming in the info package. This is achieved in start routine.
9. What are Return Tables?
• When we want to return multiple records, instead of single value, we use the
return table in the Update Routine. Example: If we have total telephone expense
for a Cost Center, using a return table we can get
expense per employee.
10. How do start routine and return table synchronize with each other?
• Return table is used to return the Value following the execution of start
routine
11. What is the difference
between V1, V2 and V3 updates?
• V1 Update: It is a Synchronous update. Here the Statistics update is carried
out at the same time as the document update (in the application
tables).
• V2 Update: It is an Asynchronous update. Statistics update and the Document
update take place as different tasks.
o V1 & V2 don't need scheduling.
• Serialized V3 Update: The V3 collective update must be scheduled as a job
(via LBWE). Here, document data is collected in the order it was created and
transferred into the BW as a batch job. The transfer sequence may not be the
same as the order in which the data was created in all scenarios. V3 update
only processes the update data that is successfully processed with the V2
update.
12. What is compression?
• It is a process used to delete the Request IDs and this saves space.
13. What is Rollup?
• This is used to load new DataPackages (requests) into the InfoCube
aggregates. If we have not performed a rollup then the new InfoCube data will
not be available while reporting on the aggregate.
14. What is table partitioning and what are the benefits of partitioning in an
InfoCube?
• It is the method of dividing a table which would enable a quick reference.
SAP uses fact file partitioning to improve performance. We can partition only
at 0CALMONTH or 0FISCPER. Table partitioning helps to run the report faster as
data is stored in the relevant partitions. Also table maintenance becomes
easier. Oracle,
Informix, IBM DB2/390 supports table partitioning while SAP DB, Microsoft SQL
Server, IBM DB2/400 do not support table portioning.
15. How many extra partitions are created and why?
• Two partitions are created for date before the begin date and after the end
date.
16. What are the options available in transfer rule?
• InfoObject
• Constant
• Routine
• Formula
17. How would you optimize the dimensions?
• We should define as many dimensions as possible and we have to take care that
no single dimension crosses more than 20% of the fact table size.
18. What are Conversion Routines for units and currencies in the update rule?
• Using this option we can write ABAP
code for Units / Currencies conversion. If we enable this flag then unit of Key
Figure appears in the ABAP code as an additional parameter. For example, we can
convert units in Pounds to Kilos.
19. Can an InfoObject be an InfoProvider, how and why?
• Yes, when we want to report on Characteristics or Master Data. We have to
right click on the InfoArea and select "Insert characteristic as data
target". For example, we can make 0CUSTOMER as an InfoProvider and report
on it.
20. What is Open Hub Service?
• The Open Hub Service enables us to distribute data from an SAP BW system into
external Data Marts, analytical applications, and other applications. We can
ensure controlled distribution using several systems. The central object for
exporting data is the InfoSpoke. We can define the source and the target object
for the data. BW becomes a hub of an enterprise data warehouse.
The distribution of data becomes clear through central monitoring from the
distribution status in the BW system.
21. How do you transform Open
Hub Data?
• Using BADI we can transform Open Hub Data according to the destination
requirement.
22. What is ODS?
• Operational DataSource is used for detailed storage of data. We can overwrite
data in the ODS. The data is stored in transparent tables.
23. What are BW Statistics and what is its use?
• They are group of Business Content InfoCubes which are used to measure
performance for Query and Load Monitoring. It also shows the usage of
aggregates, OLAP and Warehouse management
http://www.ittestpapers.com/articles/713/3/SAP-BW-Interview-Questions---Part-A/Page3.html
Communication Structure and Transfer
rules
• Create and InfoPackage
• Load Data
25. What are the delta options available when you load from flat file?
• The 3 options for Delta Management with Flat Files:
o Full Upload
o New Status for Changed records (ODS Object only)
o Additive Delta (ODS Object & InfoCube)
Q) Under which menu path is the Test Workbench to be found, including in
earlier Releases?
The menu path is: Tools - ABAP Workbench - Test - Test Workbench.
Q) I want to delete a BEx query that is in Production system through request. Is
anyone aware about it?
A) Have you tried the RSZDELETE transaction?
Q) Errors while monitoring process chains.
A) During data loading. Apart from them, in process chains you add so many
process types, for example after loading data into Info Cube, you rollup data
into aggregates, now this rolling up of data into aggregates is a process type
which you keep after the process type for loading data into Cube. This rolling
up into aggregates might fail.
Another one is after you load data into ODS, you activate ODS data (another
process type) this might also fail.
Q) In Monitor----- Details (Header/Status/Details) à Under Processing (data
packet): Everything OK à Context menu of Data Package 1 (1 Records): Everything
OK ---- Simulate update. (Here we can debug update rules or transfer rules.)
SM50 à Program/Mode à Program à Debugging & debug this work process.
Q) PSA Cleansing.
A) You know how to edit PSA. I don't think you can delete single records. You
have to delete entire PSA data for a request.
Q) Can we make a datasource to support delta.
A) If this is a custom (user-defined) datasource you can make the datasource
delta enabled. While creating datasource from RSO2, after entering datasource
name and pressing create, in the next screen there is one button at the top,
which says generic delta. If you want more details about this there is a
chapter in Extraction book, it's in last pages u find out.
Generic delta services: -
Supports delta extraction for generic extractors according to:
Time stamp
Calendar day
Numeric pointer, such as document number & counter
Only one of these attributes can be set as a delta attribute.
Delta extraction is supported for all generic extractors, such as tables/views,
SAP Query and function modules
The delta queue (RSA7) allows you to monitor the current status of the delta
attribute
Q) Workbooks, as a general rule, should be transported with the
role.
Here are a couple of scenarios:
1. If both the workbook and its role have been previously transported, then the
role does not need to be part of the transport.
2. If the role exists in both dev and the target system but the workbook has
never been transported, and then you have a choice of transporting the role
(recommended) or just the workbook. If only the workbook is transported, then
an additional step will have to be taken after import: Locate the WorkbookID
via Table RSRWBINDEXT (in Dev and verify the same exists in the target system)
and proceed to manually add it to the role in the target system via Transaction
Code PFCG -- ALWAYS use control c/control v copy/paste for manually adding!
3. If the role does not exist in the target system you should transport both
the role and workbook. Keep in mind that a workbook is an object unto itself
and has no dependencies on other objects. Thus, you do not receive an error
message from the transport of 'just a workbook' -- even though it may not be
visible, it will exist (verified via Table RSRWBINDEXT).
Overall, as a general rule, you should transport roles with workbooks.
Q) How much time does it take to extract 1 million (10 lackhs) of records into
an infocube?
A. This depends, if you have complex coding in update rules it will take longer
time, or else it will take less than 30 minutes.
Q) What are the five ASAP Methodologies?
A: Project plan, Business Blue print, Realization, Final preparation & Go-Live - support.
1. Project Preparation: In this phase, decision makers define clear project
objectives and an efficient decision making process ( i.e. Discussions with the
client, like what are his needs and requirements etc.). Project managers
will be involved in this phase (I guess).
A Project Charter is issued and an implementation strategy is outlined in this
phase.
2. Business Blueprint: It is a detailed documentation of your company's
requirements. (i.e. what are the objects we need to develop are modified
depending on the client's requirements).
3. Realization: In this only, the implementation of the project takes place (development
of objects etc) and we are involved in the project from here only.
4. Final Preparation: Final preparation before going live i.e. testing,
conducting pre-go-live, end user training etc.
End user training is given that is in the client site you train them how to
work with the new environment, as they are new to the technology.
5. Go-Live & support: The project has gone live and it is into production.
The Project team will be supporting the end users.
Q) What is landscape of R/3 & what is landscape of BW. Landscape of R/3 not
sure.
Then Landscape of b/w: u have the development system, testing system, production system
Development system: All the implementation part is done in this sys. (I.e.,
Analysis of objects developing, modification etc) and from here the objects are
transported to the testing system, but before transporting an initial test
known as Unit testing
(testing of objects) is done in the development sys.
Testing/Quality system: quality check is done in this system and integration
testing is done.
Production system: All the extraction part takes place in this sys.
Q) How do you measure the size of infocube?
A: In no of records.
Q). Difference between infocube and ODS?
A: Infocube is structured as star schema (extended) where a fact table is
surrounded by different dim table that are linked with DIM'ids. And the data
wise, you will have aggregated data in the cubes. No overwrite functionality
ODS is a flat structure (flat table) with no star schema concept and which will
have granular data (detailed level). Overwrite functionality.
Flat file
datasources does not support 0recordmode in extraction.
x before, -after, n new, a add, d delete, r reverse
Q) Difference between display attributes and navigational attributes?
A: Display attribute is one, which is used only for display purpose in the
report. Where as navigational attribute is used for drilling down in the
report. We don't need to maintain Navigational attribute in the cube as a
characteristic (that is the advantage) to drill down.
Q. SOME DATA IS UPLOADED TWICE INTO INFOCUBE. HOW TO CORRECT IT?
A: But how is it possible? If you load it manually twice, then you can delete
it by requestID.
Q. CAN U ADD A NEW FIELD AT THE ODS LEVEL?
Sure you can. ODS is nothing but a table.
Q. CAN NUMBER OF DATASOURCES HAVE ONE INFOSOURCE?
A) Yes of course. For example, for loading text and hierarchies we use
different data sources but the same InfoSource.
Q. BRIEF THE DATAFLOW IN BW.
A) Data flows from transactional system to analytical system (BW). DataSources
on the transactional system needs to be replicated on BW side and attached to
infosource and update rules respectively.
Q. CURRENCY CONVERSIONS CAN BE WRITTEN IN UPDATE RULES. WHY NOT IN TRANSFER
RULES?
Q) WHAT IS PROCEDURE TO UPDATE DATA INTO DATA TARGETS?
FULL and DELTA.
Q) AS WE USE Sbwnn, sbiw1, sbiw2 for delta update in LIS THEN
WHAT IS THE PROCEDURE IN LO-COCKPIT?
No LIS in LO cockpit. We will have datasources and can be maintained (append
fields). Refer white paper
on LO-Cockpit extractions.
Q) Why we delete the setup tables (LBWG) & fill them (OLI*BW)?
A) Initially we don't delete the setup tables but when we do change in extract
structure we go for it. We r changing the extract structure right, that means
there are some newly added fields in that which r not before. So to get the
required data ( i.e.; the data which is required is taken and to avoid
redundancy) we delete n then fill the setup tables.
To refresh the statistical data.
The extraction set up reads the dataset that you want to process such as,
customers orders with the tables like VBAK, VBAP) & fills the relevant communication
structure with the data. The data is stored in cluster
tables from where it is read when the initialization is run. It is important
that during initialization phase, no one generates or modifies application
data, at least until the tables can be set up.
Q) SIGNIFICANCE of ODS?
It holds granular data (detailed level).
Q) WHERE THE PSA DATA IS STORED?
In PSA table.
Q) WHAT IS DATA SIZE?
The volume of data one data target holds (in no. of records)
Q) Different types of INFOCUBES.
Basic, Virtual (remote, sap remote and multi)
Virtual Cube is used for example, if you consider railways reservation all the
information has to be updated online. For designing the Virtual cube you have
to write the function module that is linking to table, Virtual cube it is like
a the structure, when ever the table is updated the virtual cube will fetch the
data from table and display report Online... FYI.. you will get the information
: https://www.sdn.sap.com/sdn
/index.sdn and search for Designing Virtual Cube and you will get
a good material designing the Function Module
Q) INFOSET QUERY.
Can be made of ODS's and Characteristic InfoObjects with masterdata.
Q) IF THERE ARE 2 DATASOURCES HOW MANY TRANSFER STRUCTURES ARE THERE.
In R/3 or in BW? 2 in R/3 and 2 in BW
Q) ROUTINES?
Exist in the InfoObject, transfer routines, update routines and start routine
Q) BRIEF SOME STRUCTURES USED IN BEX.
Rows and Columns, you can create structures.
Q) WHAT ARE THE DIFFERENT VARIABLES USED IN BEX?
Different Variable's are Texts, Formulas, Hierarchies, Hierarchy nodes &
Characteristic values.
Variable Types are
Manual entry /default value
Replacement path
SAP exit
Customer exit
Authorization
Q) HOW MANY LEVELS YOU CAN GO IN REPORTING?
You can drill down to any level by using Navigational attributes and jump
targets.
Q) WHAT ARE INDEXES?
Indexes are data base indexes, which help in retrieving data fastly.
Q) DIFFERENCE BETWEEN 2.1 AND 3.X VERSIONS.
Help! Refer documentation
Q) IS IT NESSESARY TO INITIALIZE EACH TIME THE DELTA UPDATE IS USED?
No.
Q) WHAT IS THE SIGNIFICANCE OF KPI'S?
KPI's indicate the performance of a company. These are key figures
Q) AFTER THE DATA EXTRACTION
WHAT IS THE IMAGE POSITION.
After image (correct me if I am wrong)
Q) REPORTING AND RESTRICTIONS.
Help! Refer documentation.
Q) TOOLS USED FOR PERFORMANCE TUNING.
ST22, Number ranges, delete indexes before load. Etc
Q) PROCESS CHAINS: IF U has USED IT THEN HOW WILL U SCHEDULING DATA DAILY.
There should be some tool to run the job daily (SM37 jobs)
Q) AUTHORIZATIONS.
Profile generator
Q) WEB REPORTING.
What are you expecting??
Q) CAN CHARECTERSTIC INFOOBJECT CAN BE INFOPROVIDER.
Of course
Q) PROCEDURES OF REPORTING ON MULTICUBES
Refer help. What are you expecting? MultiCube works on Union condition
Q) EXPLAIN TRANPSORTATION OF OBJECTS?
Dev---àQ and Dev-------àP
Q) What types of partitioning are there for BW?
There are two Partitioning Performance aspects for BW (Cube & PSA)
Query Data Retrieval
Performance Improvement:
Partitioning by (say) Date Range improves data retrieval by making best use of
database [data range] execution plans and indexes (of say Oracle database engine).
B) Transactional Load Partitioning Improvement:
Partitioning based on expected load volumes and data element sizes. Improves
data loading into PSA and Cubes by infopackages (Eg. without timeouts).
Q) How can I compare data in R/3 with data in a BW Cube after the daily delta
loads? Are there any standard procedures for checking them or matching the
number of records?
A) You can go to R/3 TCode RSA3 and run the extractor. It will give you the
number of records extracted. Then go to BW Monitor to check the number of
records in the PSA and check to see if it is the same & also in the monitor
header tab.
A) RSA3 is a simple extractor checker program that allows you to rule out
extracts problems in R/3. It is simple to use, but only really tells you if the
extractor works. Since records that get updated into Cubes/ODS structures are
controlled by Update Rules, you will not be able to determine what is in the
Cube compared to what is in the R/3 environment. You will need to compare
records on a 1:1 basis against records in R/3 transactions for the functional
area in question. I would recommend enlisting the help of the end user community
to assist since they presumably know the data.
To use RSA3, go to it and enter the extractor ex: 2LIS_02_HDR. Click execute
and you will see the record count, you can also go to display that data. You
are not modifying anything so what you do in RSA3 has no effect on data quality
afterwards. However, it will not tell you how many records should be expected
in BW for a given load. You have that information in the monitor RSMO during
and after data loads. From RSMO for a given load you can determine how many
records were passed through the transfer rules from R/3, how many targets were
updated, and how many records passed through the Update Rules. It also gives
you error messages from the PSA.
Q) Types of Transfer Rules?
A) Field to Field mapping, Constant, Variable & routine.
Q) Types of Update Rules?
A) (Check box), Return table
Q) Transfer Routine?
A) Routines, which we write in, transfer rules.
Q) Update Routine?
A) Routines, which we write in Update rules
Q) What is the difference between writing a routine in transfer rules and
writing a routine in update rules?
A) If you are using the same InfoSource to update data in more than one data
target its better u write in transfer rules because u can assign one InfoSource
to more than one data target & and what ever logic u write in update rules
it is specific to particular one data target.
Q) Routine with Return Table.
A) Update rules generally only have one return value. However, you can create a
routine in the tab strip key figure calculation, by choosing checkbox Return
table. The corresponding key figure routine then no longer has a return value,
but a return table. You can then generate as many key figure values, as you
like from one data record.
Q) Start routines?
A) Start routines u can write in both updates rules and transfer rules, suppose
you want to restrict (delete) some records based on conditions before getting
loaded into data targets, then you can specify this in update rules-start
routine.
Ex: - Delete Data_Package ani ante it will delete a record based on the
condition
Q) X & Y Tables?
X-table = A table to link material SIDs with SIDs for time-independent
navigation attributes.
Y-table = A table to link material SIDs with SIDS for time-dependent navigation
attributes.
There are four types of sid tables
X time independent navigational attributes sid tables
Y time dependent navigational attributes sid tables
H hierarchy sid tables
I hierarchy structure sid tables
Q) Filters & Restricted Key figures (real time example)
Restricted KF's u can have for an SD cube: billed quantity, billing value, no:
of billing documents as RKF's.
Q) Line-Item Dimension (give me an real time example)
Line-Item Dimension: Invoice no: or Doc no: is a real time example
Q) What does the number in the 'Total' column in Transaction RSA7 mean?
A) The 'Total' column displays the number of LUWs that were written in the
delta queue and that have not yet been confirmed. The number includes the LUWs
of the last delta request (for repetition of a delta request) and the LUWs for
the next delta request. A LUW only disappears from the RSA7 display when it has
been transferred to the BW System and a new delta request has been received
from the BW System.
Q) How to know in which table (SAP BW) contains Technical Name / Description
and creation data of a particular Reports. Reports that are created using BEx
Analyzer.
A) There is no such table in BW if you want to know such details while you are
opening a particular query press properties button you will come to know all
the details that you wanted.
You will find your information about technical names and description about
queries in the following tables. Directory of all reports (Table RSRREPDIR) and
Directory of the reporting component elements (Table RSZELTDIR) for workbooks
and the connections to queries check Where- used list for reports in workbooks
(Table RSRWORKBOOK) Titles of Excel Workbooks in InfoCatalog (Table
RSRWBINDEXT)
Q) What is a LUW in the delta queue?
A) A LUW from the point of view of the delta queue can be an individual
document, a group of documents from a collective run or a whole data packet of
an application
extractor.
Q) Why does the number in the 'Total' column in the overview screen of
Transaction RSA7 differ from the number of data records that is displayed when
you call the detail view?
A) The number on the overview screen corresponds to the total of LUWs (see also
first question) that were written to the qRFC queue and that have not yet been
confirmed. The detail screen displays the records contained in the LUWs. Both,
the records belonging to the previous delta request and the records that do not
meet the selection conditions of the preceding delta init requests are filtered
out. Thus, only the records that are ready for the next delta request are
displayed on the detail screen. In the detail screen of Transaction RSA7, a
possibly existing customer exit is not taken into account.
Q) Why does Transaction RSA7 still display LUWs on the overview screen after
successful delta loading?
A) Only when a new delta has been requested does the source system learn that
the previous delta was successfully loaded to the BW System. Then, the LUWs of
the previous delta may be confirmed (and also deleted). In the meantime, the
LUWs must be kept for a possible delta request repetition. In particular, the
number on the overview screen does not change when the first delta was loaded
to the BW System.
Q) Why are selections not taken into account when the delta queue is filled?
A) Filtering according to selections takes place when the system reads from the
delta queue. This is necessary for reasons of performance.
Q) Why is there a DataSource with '0' records in RSA7 if delta exists and has
also been loaded successfully?
It is most likely that this is a DataSource that does not send delta data to
the BW System via the delta queue but directly via the extractor (delta for
master data using ALE change pointers). Such a DataSource should not be
displayed in RSA7. This error is corrected with BW 2.0B Support Package 11.
Q) Do the entries in table ROIDOCPRMS have an impact on the performance of the
loading procedure from the delta queue?
A) The impact is limited. If performance problems are related to the loading
process from the delta queue, then refer to the application-specific notes (for
example in the CO-PA area, in the logistics cockpit area and so on).
Caution: As of Plug In 2000.2 patch 3 the entries in table ROIDOCPRMS are as
effective for the delta queue as for a full update. Please note, however, that
LUWs are not split during data loading for consistency reasons. This means that
when very large LUWs are written to the DeltaQueue, the actual package size may
differ considerably from the MAXSIZE and MAXLINES parameters.
Q) Why does it take so long to display the data in the delta queue (for example
approximately 2 hours)?
A) With Plug In 2001.1 the display was changed: the user has the option of
defining the amount of data to be displayed, to restrict it, to selectively
choose the number of a data record, to make a distinction between the 'actual'
delta data and the data intended for repetition and so on.
Q) What is the purpose of function 'Delete data and meta data in a queue' in
RSA7? What exactly is deleted?
A) You should act with extreme caution when you use the deletion function in
the delta queue. It is comparable to deleting an InitDelta in the BW System and
should preferably be executed there. You do not only delete all data of this
DataSource for the affected BW System, but also lose the entire information
concerning the delta initialization. Then you can only request new deltas after
another delta initialization.
When you delete the data, the LUWs kept in the qRFC queue for the corresponding
target system are confirmed. Physical deletion only takes place in the qRFC
outbound queue if there are no more references to the LUWs.
The deletion function is for example intended for a case where the BW System,
from which the delta initialization was originally executed, no longer exists
or can no longer be accessed.
Q) Why does it take so long to delete from the delta queue (for example half a
day)?
A) Import PlugIn 2000.2 patch 3. With this patch the performance during
deletion is considerably improved.
Q) Why is the delta queue not updated when you start the V3 update in the
logistics cockpit area?
A) It is most likely that a delta initialization had not yet run or that the
delta initialization was not successful. A successful delta initialization (the
corresponding request must have QM status 'green' in the BW System) is a
prerequisite for the application data being written in the delta queue.
Q) What is the relationship between RSA7 and the qRFC monitor (Transaction
SMQ1)?
A) The qRFC monitor basically displays the same data as RSA7. The internal
queue name must be used for selection on the initial screen of the qRFC
monitor. This is made up of the prefix 'BW, the client and the short name of
the DataSource. For DataSources whose name are 19 characters long or shorter,
the short name corresponds to the name of the DataSource. For DataSources whose
name is longer than 19 characters (for delta-capable DataSources only possible
as of PlugIn 2001.1) the short name is assigned in table ROOSSHORTN.
In the qRFC monitor you cannot distinguish between repeatable and new LUWs.
Moreover, the data of a LUW is displayed in an unstructured manner there.
Q) Why are the data in the delta queue although the V3 update was not started?
A) Data was posted in background. Then, the records are updated directly in the
delta queue (RSA7). This happens in particular during automatic goods receipt
posting (MRRS). There is no duplicate transfer of records to the BW system. See
Note 417189.
Q) Why does button 'Repeatable' on the RSA7 data details screen not only show
data loaded into BW during the last delta but also data that were newly added,
i.e. 'pure' delta records?
A) Was programmed in a way that the request in repeat mode fetches both
actually repeatable (old) data and new data from the source system.
Q) I loaded several delta inits with various selections. For which one is the
delta loaded?
A) For delta, all selections made via delta inits are summed up. This means, a
delta for the 'total' of all delta initializations is loaded.
Q) How many selections for delta inits are possible in the system?
A) With simple selections (intervals without complicated join conditions or
single values), you can make up to about 100 delta inits. It should not be
more.
With complicated selection conditions, it should be only up to 10-20 delta
inits.
Reason: With many selection conditions that are joined in a complicated way,
too many 'where' lines are generated in the generated ABAP
source code that may exceed the memory limit.
Q) I intend to copy the source system, i.e. make a client copy. What will
happen with may delta? Should I initialize again after that?
A) Before you copy a source client or source system, make sure that your deltas
have been fetched from the DeltaQueue into BW and that no delta is pending.
After the client copy, an inconsistency might occur between BW delta tables and
the OLTP delta tables as described in Note 405943. After the client copy, Table
ROOSPRMSC will probably be empty in the OLTP since this table is
client-independent. After the system copy, the table will contain the entries
with the old logical system name that are no longer useful for further delta
loading from the new logical system. The delta must be initialized in any case
since delta depends on both the BW system and the source system. Even if no
dump 'MESSAGE_TYPE_X' occurs in BW when editing or creating an InfoPackage, you
should expect that the delta have to be initialized after the copy.
Q) Is it allowed in Transaction SMQ1 to use the functions for manual control of
processes?
A) Use SMQ1 as an instrument for diagnosis and control only. Make changes to BW
queues only after informing the BW Support or only if this is explicitly
requested in a note for component 'BC-BW' or 'BW-WHM-SAPI'.
Q) Despite of the delta request being started after completion of the
collective run (V3 update), it does not contain all documents. Only another
delta request loads the missing documents into BW. What is the cause for this
"splitting"?
A) The collective run submits the open V2 documents for processing to the task
handler, which processes them in one or several parallel update processes in an
asynchronous way. For this reason, plan a sufficiently large "safety time
window" between the end of the collective run in the source system and the
start of the delta request in BW. An alternative solution where this problem
does not occur is described in Note 505700.
Q) Despite my deleting the delta init, LUWs are still written into the
DeltaQueue?
A) In general, delta initializations and deletions of delta inits should always
be carried out at a time when no posting takes place. Otherwise, buffer
problems may occur: If a user started the internal mode at a time when the
delta initialization was still active, he/she posts data into the queue even
though the initialization had been deleted in the meantime. This is the case in
your system.
Q) In SMQ1 (qRFC Monitor) I have status 'NOSEND'. In the table TRFCQOUT, some
entries have the status 'READY', others 'RECORDED'. ARFCSSTATE is 'READ'. What
do these statuses mean? Which values in the field 'Status' mean what and which
values are correct and which are alarming? Are the statuses BW-specific or
generally valid in qRFC?
A) Table TRFCQOUT and ARFCSSTATE: Status READ means that the record was read
once either in a delta request or in a repetition of the delta request.
However, this does not mean that the record has successfully reached the BW
yet. The status READY in the TRFCQOUT and RECORDED in the ARFCSSTATE means that
the record has been written into the DeltaQueue and will be loaded into the BW
with the next delta request or a repetition of a delta. In any case only the
statuses READ, READY and RECORDED in both tables are considered to be valid.
The status EXECUTED in TRFCQOUT can occur temporarily. It is set before
starting a DeltaExtraction for all records with status READ present at that
time. The records with status EXECUTED are usually deleted from the queue in
packages within a delta request directly after setting the status before
extracting a new delta. If you see such records, it means that either a process
which is confirming and deleting records which have been loaded into the BW is
successfully running at the moment, or, if the records remain in the table for
a longer period of time with status EXECUTED, it is likely that there are
problems with deleting the records which have already been successfully been
loaded into the BW. In this state, no more deltas are loaded into the BW. Every
other status is an indicator for an error or an inconsistency. NOSEND in SMQ1
means nothing (see note 378903).
The value 'U' in field 'NOSEND' of table TRFCQOUT is discomforting.
Q) The extract structure was changed when the DeltaQueue was empty. Afterwards
new delta records were written to the DeltaQueue. When loading the delta into
the PSA, it shows that some fields were moved. The same result occurs when the
contents of the DeltaQueue are listed via the detail display. Why are the data
displayed differently? What can be done?
Make sure that the change of the extract structure is also reflected in the
database and that all servers are synchronized. We recommend to reset the
buffers using Transaction $SYNC. If the extract structure change is not
communicated synchronously to the server where delta records are being created,
the records are written with the old structure until the new structure has been
generated. This may have disastrous consequences for the delta.
When the problem occurs, the delta needs to be re-initialized.
Q) How and where can I control whether a repeat delta is requested?
A) Via the status of the last delta in the BW Request Monitor. If the request
is RED, the next load will be of type 'Repeat'. If you need to repeat the last
load for certain reasons, set the request in the monitor to red manually. For
the contents of the repeat see Question 14. Delta requests set to red despite
of data being already updated lead to duplicate records in a subsequent repeat,
if they have not been deleted from the data targets concerned before.
Q) As of PI 2003.1, the Logistic Cockpit offers various types of update
methods. Which update method is recommended in logistics? According to which
criteria should the decision be made? How can I choose an update method in
logistics?
See the recommendation in Note 505700.
Q) Are there particular recommendations regarding the data volume the
DeltaQueue may grow to without facing the danger of a read failure due to
memory problems?
A) There is no strict limit (except for the restricted number range of the
24-digit QCOUNT counter in the LUW management table - which is of no practical
importance, however - or the restrictions regarding the volume and number of
records in a database table).
When estimating "smooth" limits, both the number of LUWs is important
and the average data volume per LUW. As a rule, we recommend to bundle data
(usually documents) already when writing to the DeltaQueue to keep number of
LUWs small (partly this can be set in the applications, e.g. in the Logistics
Cockpit). The data volume of a single LUW should not be considerably larger
than 10% of the memory available to the work process for data extraction
(in a 32-bit architecture with a memory volume of about 1GByte per work
process, 100 Mbytes per LUW should not be exceeded). That limit is of rather
small practical importance as well since a comparable limit already applies
when writing to the DeltaQueue. If the limit is observed, correct reading is
guaranteed in most cases.
If the number of LUWs cannot be reduced by bundling application transactions,
you should at least make sure that the data are fetched from all connected BWs
as quickly as possible. But for other, BW-specific, reasons, the frequency
should not be higher than one DeltaRequest per hour.
To avoid memory problems, a program-internal limit ensures that never more than
1 million LUWs are read and fetched from the database per DeltaRequest. If this
limit is reached within a request, the DeltaQueue must be emptied by several
successive DeltaRequests. We recommend, however, to try not to reach that limit
but trigger the fetching of data from the connected BWs already when the number
of LUWs reaches a 5-digit value.
Q) I would like to display the date the data was uploaded on the
report. Usually, we load the transactional data nightly. Is there any easy way
to include this information on the report for users? So that they know the
validity of the report.
A) If I understand your requirement correctly, you want to display the date on
which data was loaded into the data target from which the report is being
executed. If it is so, configure your workbook to display the text elements in
the report. This displays the relevance of data field, which is the date on which
the data load has taken place.
Q) Can we filter the fields at Transfer Structure?
Q) Can we load data directly into infoobject with out extraction is it
possible.
Yes. We can copy from other infoobject if it is same. We load data from PSA if
it is already in PSA.
Q) HOW MANY DAYS CAN WE KEEP THE DATA IN PSA, IF WE R SHEDULED DAILY, WEEKLY
AND MONTHLY.
a) We can set the time.
Q) HOW CAN U GET THE DATA FROM CLIENT IF U R WORKING ON OFFSHORE PROJECTS.
THROUGH WHICH NETWORK.
a) VPN…………….Virtual
Private Network, VPN is nothing but one sort of network
where we can connect to the client systems sitting in offshore through RAS
(Remote access server).
Q) HOW CAN U ANALIZE THE PROJECT AT FIRST?
Prepare Project Plan and Environment
Define Project Management
Standards and
Procedures
Define Implementation Standards and Procedures
Testing & Go-live + supporting.
Q) THERE is one ODS AND 4 INFOCUBES. WE SEND DATA AT TIME TO ALL CUBES IF ONE
CUBE GOT LOCK ERROR. HOW CAN U RECTIFY THE ERROR?
Go to TCode sm66 then see which one is locked select that pid from there and
goto sm12
TCode then unlock it this is happened when lock errors are occurred when u
scheduled.
Q) Can anybody tell me how to add a navigational attribute in the BEx report in
the rows?
A) Expand dimension under left side panel (that is infocube panel) select than
navigational attributes drag and drop under rows panel.
Q) IF ANY TRASACTION CODE LIKE SMPT OR STMT.
In current systems (BW 3.0B and R/3 4.6B) these Tcodes don't exist!
Q) WHAT IS TRANSACTIONAL CUBE?
A) Transactional InfoCubes differ from standard InfoCubes in that the former
have an improved write access performance level. Standard InfoCubes are
technically optimized for read-only access and for a comparatively small number
of simultaneous accesses. Instead, the transactional InfoCube was developed to
meet the demands of SAP Strategic Enterprise Management (SEM), meaning that,
data is written to the InfoCube (possibly by several users at the same time)
and re-read as soon as possible. Standard Basic cubes are not suitable for
this.
Q) Is there any way to delete cube contents within update rules from an ODS
data source? The reason for this would be to delete (or zero out) a cube record
in an "Open Order" cube if the open order quantity was 0.
I've tried using the 0recordmode but that doesn't work. Also, would it
be easier to write a program that would be run after the load and delete
the records with a zero open qty?
A) START routine for update rules u can write ABAP code.
A) Yap, you can do it. Create a start routine in Update rule.
It is not "Deleting cube contents with update rules" It is only
possible to avoid that some content is updated into the InfoCube using the
start routine. Loop at all the records and delete the record that has the
condition. "If the open order quantity was 0" You have to think also
in before and after images in case of a delta upload. In that case you may
delete the change record and keep the old and after the change the wrong
information.
Q) I am not able to access a node in hierarchy directly using variables for
reports. When I am using Tcode RSZV it is giving a message that it doesn't
exist in BW 3.0 and it is embedded in BEx. Can any one tell me the other
options to get the same functionality in BEx?
A) Tcode RSZV is used in the earlier version of 3.0B only. From 3.0B onwards,
it's possible in the Query Designer (BEx) itself. Just right click on the
InfoObject for which you want to use as variables and precede further selecting
variable type and proce -
Hi,
Here are some BW interview questions. Make sure you have prepared for all the q's before going for an interview.
1) Please describe your experience with BEx (Business Explorer)
A) Rate your level of experience with BEx and the rationale for youre self-rating
B) How many queries have you developed? :
C) How many reports have you written?
D) How many workbooks have you developed?
E) Experience with jump targets (OLTP, use jump target)
F) Describe experience with BW-compatible ETL tools (e.g. Ascential)
2) Describe your experience with 3rd party report tools (Crystal Decisions, Business Objects a plus)
3) Describe your experience with the design and implementation of standard & custom InfoCubes.
1. How many InfoCubes have you implemented from start to end by yourself (not with a team)?
2. Of these Cubes, how many characteristics (including attributes) did the largest one have.
3. How much customization was done on the InfoCubes have you implemented?
4) Describe your experience with requirements definition/gathering.
5) What experience have you had creating Functional and Technical specifications?
6) Describe any testing experience you have:
7) Describe your experience with BW extractors
1. How many standard BW extractors have you implemented?
2. How many custom BW extractors have you implemented?
8) Describe how you have used Excel as a compliment to BEx
A) Describe your level of expertise and the rationale for your self-rating (experience with macros, pivot tables and formatting)
B)
9) Describe experience with ABAP
10) Describe any hands on experience with ASAP Methodology.
11) Identify SAP functional areas (SEM, CRM, etc.) you have experience in. Describe that experience.
12) What is partitioning and what are the benefits of partitioning in an InfoCube?
A) Partitioning is the method of dividing a table (either column wise or row wise) based on the fields available which would enable a quick reference for the intended values of the fields in the table. By partitioning an infocube, the reporting performance is enhanced because it is easier to search in smaller tables. Also table maintenance becomes easier.
13) What does Rollup do?
A) Rollup creates aggregates in an infocube whenever new data is loaded.
14) What are the inputs for an infoset?
A) The inputs for an infoset are ODS objects and InfoObjects (with master data or text).
15) What internally happens when BW objects like Info Object, Info Cube or ODS are created and activated?
A) When an InfoObject, InfoCube or ODS object is created, BW maintains a saved version of that object but does not make it available for use. Once the object is activated, BW creates an active version that is available for use.
16) What is the maximum number of key fields that you can have in an ODS object?
A) 16.
17) What is the specific advantage of LO extraction over LIS extraction?
A) The load performance of LO extraction is better than that of LIS. In LIS two tables are used for delta management that is cumbersome. In LO only one delta queue is used for delta management.
18) What is the importance of 0REQUID?
A) It is the InfoObject for Request id. OREQUID enables BW to distinguish between different data records.
19) Can you add programs in the scheduler?
A) Yes. Through event handling.
20) What is the importance of the table ROIDOCPRMS?
A) It is an IDOC parameter source system. This table contains the details of the data transfer like the source system of the data, data packet size, maximum number of lines in a data packet, etc. The data packet size can be changed through the control parameters option on SBIW i.e., the contents of this table can be changed.
21) What is the importance of 'start routine' in update rules?
A) A Start routine is a user exit that can be executed before the update rule starts to allow more complex computations for a key figure or a characteristic. The start routine has no return value. Its purpose is to execute preliminary calculations and to store them in a global data structure. You can access this structure or table in the other routines.
22) When is IDOC data transfer used?
A) IDOCs are used for communication between logical systems like SAP R/3, R/2 and non-SAP systems using ALE and for communication between an SAP R/3 system and a non-SAP system. In BW, an IDOC is a data container for data exchange between SAP systems or between SAP systems and external systems based on an EDI interface. IDOCs support limited file size of 1000 bytes. So IDOCs are not used when loading data into PSA since data there is more detailed. It is used when the file size is lesser than 1000 bytes.
23) What is partitioning characteristic in CO-PA used for?
A) For easier parallel search and load of data.
24) What is the advantage of BW reporting on CO-PA data compared with directly running the queries on CO-PA?
A) BW has a better performance advantage over reporting in R/3. For a huge amount of data, the R/3 reporting tool is at a serious disadvantage because R/3 is modeled as an OLTP system and is good for transaction processing rather than analytical processing.
25) What is the function of BW statistics cube?
A) BW statistics cube contains the data related to the reporting performance and the data loads of all the InfoCubes in the BW system.
26) When an ODS is in 'overwrite' mode, does uploading the same data again and again create new entries in the change log each time data is uploaded?
A) No.
27) What is the function of 'selective deletion' tab in the manage->contents of an infocube?
A) It allows us to select a particular value of a particular field and delete its contents.
28) When we collapse an infocube, is the consolidated data stored in the same infocubeinfocube? or is it stored in the new
A) Data is stored in the same cube.
29) What is the effect of aggregation on the performance? Are there any negative effects on the performance?
A) Aggregation improves the performance in reporting.
30) What happens when you load transaction data without loading master data?
A) The transaction data gets loaded and the master data fields remain blank.
31) When given a choice between a single infocube and multiple InfoCubes with a multiprovider, what factors does one need to consider before making a decision?
A) One would have to see if the InfoCubes are used individually. If these cubes are often used individually, then it is better to go for a multiprovider with many cubes since the reporting would be faster for an individual cube query rather than for a big cube with lot of data.
32) How many hierarchy levels can be created for a characteristic info object?
A) Maximum of 98 levels.
33) What is open hub service?
A) The open hub service enables you to distribute data from an SAP BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the Infospoke. Using this, you can define the object from which the data comes and into which target it is transferred. Through the open hub service, SAP BW becomes a hub of an enterprise data warehouse. The distribution of data becomes clear through central monitoring from the distribution status in the BW system.
34) What is the function of 'reconstruction' tab in an infocube?
A) It reconstructs the deleted requests from the infocube. If a request has been deleted and later someone wants the data records of that request to be added to the infocube, one can use the reconstruction tab to add those records. It goes to the PSA and brings the data to the infocube.
35) What are secondary indexes with respect to InfoCubes?
A) Index created in addition to the primary index of the infocube. When you activate a table in the ABAP Dictionary, an index is created on the primary key fields of the table. Further indexes created for the table are called secondary indexes.
36) What is DB connect and where is it used?
A) DB connect is database connecting piece of program. It is used in connecting third party tools with BW for reporting purpose.
37) Can we extract hierarchies from R/3 for CO-PA?
A) No We cannot, NO hierarchies in CO/PA�?.
38) Explain field name for partitioning in CO-PA
A) The CO/PA partitioning is used to decrease package size (eg: company code)
39) What is V3 update method ?
A) It is a program in R/3 source system that schedules batch jobs to update extract structure to data source collectively.
40) Differences between serialized and non-serialized V3 updates
41) What is the common method of finding the tables used in any R/3 extraction
A) By using the transaction LISTSCHEMA we can navigate the tables.
42) Differences between table view and infoset query
A) An InfoSet Query is a query using flat tables.
43) How to load data from one InfoCube to another InfoCube ?
A) Thro DataMarts data can be loaded from one InfoCube to another InfoCube.
44) What is the significance of setup tables in LO extractions ?
A) It adds the Selection Criteria to the LO extraction.
45) Difference between extract structure and datasource
A) In Datasource we define the data from diff source sys,where as in extract struct it contains the replicated data of datasource n where in we can define extract rules, n transfer rules
B) Extract Structure is a record layout of InfoObjects.
C) Extract Structure is created on SAP BW system.
46) What happens internally when Delta is Initialized
47) What is referential integrity mechanism ?
A) Referential integrity is the property that guarantees that values from one column depend on values from another column.This property is enforced through integrity constraints.
48) What is activation of extract structure in LO ?
49) What is the difference between Info IDoc and data IDoc ?
50) What is D-Management in LO ?
A) It is a method used in delta update methods, which is based on change log in LO.
Plz experts.. provide the answers for the questions..
Thanx in advance.
SunilHi,
In my case i dont have an experience in BW. I went straight to academy.It is like i am starting a new career.Are the questions also apply to me . -
Can anyone give me some realtime Interview questions on OBIEE
Guide me with the Interview questions and answers?
Reset your SMC. If that doesn't do it, reset PRAM.
-
Security interview questions - some fun to tickle your brain.
Hello gurus,
I know that posting interview question series are not allowed if the person has not put in any effort, but I have and folks seem to want to practice a bit sometimes so I take the liberty of creating a central one.
Tackle one or all of them to test your knowledge.
There are no model answers.
If you want to suggest additional ones, then please contact me.
The rules
Flaming of answers is allowed.
Funny answers earn a beer (or cup of tea).
There are no points.
1) When PFCG proposes 3 activities but you only want 2, how do you fix this?
2) What is the use of transaction PFUD at midnight?
3) Is PFUD needed when saving in SU01 and does the user need to logoff and on again after changes?
4) How are web services represented in authorizations of users who are not logged on?
5) How do you force a user to change their password and on which grounds would you do so?
6) What is the difference between SU24 and SU22? What is "orginal data" in SU22 context?
7) When an authorization check on S_BTCH_JOB fails, what happens?
8) Can you have more than one set of org-level values in one role?
9) Should RFC users have SAP_NEW and why?
10) What is an X-glueb command and where do you use it in SAP security?
11) What is the disadvantage of searching for AUTHORITY-CHECK statements in ABAP OO coding and how does SU53 deal with this?
12) In which tables can you make customizing settings for the security administration and name one example of such a setting which is usefull but not SAP default?
13) Can you use the information in SM20N to build roles and how?
14) If the system raises a message that authorizations are missing but you have SAP_ALL, what do you do?
15) Name any one security related SAP note and explain it's purpose or solution.
16) What are the two primary differences between a SAML token profile and a SAP logon ticket?
17) Where do you configure the local and global settings of the CUA and what are the consequences of inconsistent settings?
18) If you have users in different systems with different user ID's for the same person, what are your options to manage their authorizations centrally?
19) Explain the use of the TMSSUP* RFC destinations and the importance of the domain controller?
20) Why should you delete SAP_NEW profile and which transaction should you use before doing so?
To be continued...I have one year experience in SAP Security and only two in Basis, so flame on......... I swear I didn't use google or any of my systems for reference!<br><br>
1) When PFCG proposes 3 activities but you only want 2, how do you fix this? Best answer is to modify your su24 data. <br><br>
2) What is the use of transaction PFUD at midnight? removes invalid profiles from user records <br><br>
3)Is PFUD needed when saving in SU01 and does the user need to logoff and on again after changes? PFUD is not needed and the user needs to log off and back on again <br><br>
4)How are web services represented in authorizations of users who are not logged on? ?? <br><br>
5)How do you force a user to change their password and on which grounds would you do so? SU01 -> Logon Data tab -> Deactivate password. I am not sure what grounds this would be necessary. I have never had to use it. <br><br>
6)What is the difference between SU24 and SU22? What is "orginal data" in SU22 context? SU22 you maintain authorization objects???? Su24 you maintain which authorization objects are checked in transactions and maintain the authorization proposals. <br><br>
7)When an authorization check on S_BTCH_JOB fails, what happens? "You do not have authorization to perform whatever operation you are trying to perform." message. HAHA <br><br>
8)Can you have more than one set of org-level values in one role? I might be misinterpreting this question. But yes. Depending on the transactions inserted into the role menu, you could have more than one org level to maintain. Purchasing Org and Plant, Sales Org and Sales Division..... <br><br>
9)Should RFC users have SAP_NEW and why? No. Just insert the transactions and necessary authorization objects into a role. S_RFC for one. <br><br>
10) What is an X-glueb command and where do you use it in SAP security? ??? <br><br>
11) What is the disadvantage of searching for AUTHORITY-CHECK statements in ABAP OO coding and how does SU53 deal with this? Disadvantage? I can think of an advantage. My ABAPer shows me his programs and we work out what authority checks should be performed. <br><br>
12) In which tables can you make customizing settings for the security administration and name one example of such a setting which is usefull but not SAP default? ??? <br><br>
13) Can you use the information in SM20N to build roles and how? You could, I guess. Not a good practice though. Build roles based on business processes. <br><br>
14) If the system raises a message that authorizations are missing but you have SAP_ALL, what do you do? Regenerate SAP_ALL which reconciles new authorization objects from SAP_NEW <br><br>
15) Name any one security related SAP note and explain it's purpose or solution. Don't know the number off hand, but I was looking at it yesterday. Program Z_DEL_AGR to allow deletion of more than one role at a time. There is no mechanism in SAP to achieve this currently. <br><br>
16) What are the two primary difference between a SAML token profile and a Logon ticket in SAP? ??? I know what these are but have no experience with it. <br><br> -
Hi All
I want ABAP-HR interview questions,I am attending my first abap-hr interview on thursday,
So i want what type of question i can expect from the interviewer.
If any one plz send to my mail.
Thanks in advanceHi Chris
Keep up the comments as you are the only one that seems to willing to call out folks on the board.
Just yesterday I saw a question saying something of the effect " I am a consultant and the client is asking me to prepare configuration material on garnishment and taxes please help"
I almost did a "Chris" response but decided to hold tight and just say nothing though part of me wishes I have the clients email address so they could be aware of what a joker they are paying to help them.
Jarret
Maybe you are looking for
-
IPhoto won't open and images have disappeared
Hi, I'm at a complete loss on where to start with my problem. This week I bought an external hard drive and set up Time Machine to back up my files because I had not done this and didn't want to lose anything important. Today I tried to open iPhoto a
-
Suddenly, after making several DVDs with this computer using its old version of iMovie without trouble, I can't burn my latest creation...I'm getting a message saying that "You cannot use this version of the application iDVD with this version of Mac
-
How to Filter Report by selecting displayable columns using checkboxes
Hello, I have a page where the first region 'filter' is to check which columns you want to have displayed in a report. the second region 'report' is the report itself where i want to display only the columns checked from regions 1 'filter'. We can ma
-
PC to MAC with library on My Book Live
Hello, I'm making the move from PC to Mac and I'm trying to connect my iTunes library to my new Macbook Air 13" 128GB. The library location on the My Book Live is smb://mybooklive/Public/iTunes/christophe_music What's the best way to make the Macbook
-
Recovery mode, i have tried almost everything, help
I need some help. My ipad cant get out of recovery mode, and nothing happends when i connect it to my computer (i have itunes installed, and the newest verson of it) I have tried all links on google, youtube... but i cant find anything that works. Pl