XI (java transport system)

Guru's
We have installed a XI system (2004s SR2) and now we have to install a java transport system system. Does anybody have some documentation how to setup a Java transport system and some tips and tricks
cheers
Richard

Hi,
Check out the following guides:
Configuring the Change Management Service
http://help.sap.com/saphelp_nw04s/helpdata/en/88/311041b59bef23e10000000a155106/frameset.htm
CMS based Transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
How To Transport XI Content Using CMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Weblog: XI Software Logistics Solution III: CMS
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Also on NWDI
Concepts of the Development Infrastructure
http://help.sap.com/saphelp_nw70/helpdata/en/44/312b1a8bea3ec8e10000000a1553f6/frameset.htm
SAP Network Blog: Configuration of CMS in Central NWDI & SLD to transport XI objects
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
Hope this helps
Cheers
Manish

Similar Messages

Merging Java Transport request with Abap Transport Request in Charm

Hello All,
We have activated the Change request Management in Solution Manager. Therefore transport request of type workbench and customising can be created when you choose action 'Create Transport Request'.
However we have some SAP systems that have CTS+ integrated which allows to generate transport request number and attach objects in PI Integration Directory - java transports.
Question is - Is there a way we can integrate the java transports generated in these SAP systems with Solution Manager CHarm and transport creation.
Or can we assign the java transports to charm in any way.
We are basically looking for how when users create Charm, the abap and java transports relating to the charm are generated and created only from Solution Manager manager or how these two transports can be linked together in Solution Manager.
Thanking you in advance for your help.
Tolly

Hello Friends
I have read the links and followed the instructions and tried to create object
TABLENAME R3TR TABU and tried to save it.
I keep getting a warning message
Note: ZTABLE1 is an application table
Object TABU ZTABLE1 has object function "k", but no key.
(I don't know what key to enter. I tried the Key field name, but it said 'Enter Numeric values only').
If I ignore and save and try to create transport request and then import it on a different server, again only table structure is getting transported and not the contents/data of the table.
I would appreciate if some one can please let me konw what I am doing wrong.
Thanks
Ram
Edited by: Ram Prasad on Jun 2, 2009 3:38 PM
Edited by: Ram Prasad on Jun 2, 2009 3:40 PM

CTS+ Configuration - Web UI is not displaying JAVA transport requests

Hi,
After Configure CTS+ in XI landscape.
Issue 1: Web UI is not displaying any of the JAVA transport requests
Issue 2: The below option is not visible in STMS.
STMS >> Overview >> "Import Queue Web UI"
Completed the below settings,
RFC CTSDEPLOY is working fine.
I have maintained proxy class and logical port in transaction "LPCONFIG"
Activated CTS_BROWSER in SICF
Domain Controller : DEV
Also, Validate the above configuration and suggest.
Environment : SAP Net weaver 7.0
Product : SAP XI Dual stack system.
Thanks, Ganesh

Hi
I believe you may have 2parts UI
one is server
another one is
login
repository and user name
Did you connect give correct repository name?
regards
Muthu

Java Transport of Copies

Hello Experts,
Is it possible to send Transport of Copies for Java transports since they technically don't have their changes assigned to the tasks below the transport but instead at the transport level?
How can you send Transport of Copies for Java transports within Charm?
Thanks
Mike

Hello there,
As far as I know, CTS+ does not support transport of copies for Java objects. ChaRM operates assuming such a limitation of transport of copies for Java systems.
Just as an example: iIn the early days of integration of CTS+ with ChaRM, the normal correction document for Java systems had to be the SDMI, because the SDMI does not include any actions about transports of copies. Now the transport of copies actions are not triggered for Java systems in standard SDMJs.
Hope this helps.
Best regards,
Miguel Ariñ

Black Screen with cursor. Java Desktop System.

Hello everyone.
I've installed Solaris 10 05/08 x86 32bit in VMWare Workstation 6.5.
After I logged in in the system (Java Desktop System, Release 3), I've got only a black screen with cursor, nothing more.
X server: Xsun server configuration:
Video Device: VMWare Inc vmware0405
Video Driver: XF86 VMWARE
Resolution/Colors: 800x600 65536 colors @75Hz
Screen size: 17 inch
Monitor type: MultiFrequency 56Hz (up to 1280x1024 interlaced)
But the CDE starts normally.
What's the problem?
Help, please.
P.S. Computer with VMWARE Workstation: Asus P4P800SE, P4HT 3.0Gz, 2.0Gb Ram, Ati AIW X800 AGP 256Mb..
Edited by: xaxaTyH on Oct 9, 2008 7:26 AM
Edited by: xaxaTyH on Oct 9, 2008 7:45 AM

Hi
Have you installed all the Recommended Patchset . If not try to install the patches .
Regards

Where I can find and use "Java Desktop System Management Tools "

With Solaris 10, you not only get the Java Desktop System desktop environment, but also the Java Desktop System Management Tools and a selection of free and trial Development Tools, which are available for download only.
I found only an information about JDS release 2
but today it's release 3 already and it's said it already integrated in JDS
and above sentence it state that it already come with solaris 10?
where i can find that , where i can use it
http://docs.sun.com/app/docs/doc/817-7575/6mmsrpduj?a=view
this page said how to install but ...where I can find CD/
regards please help

Good question. It appears to have been installed with Solaris 11/06, as I have all of the packages listed here:
http://docs.sun.com/app/docs/doc/817-7575/6mmsrpdus?a=view
However, it does not appear in the Java Web Console. I tried adding it using the wcadmin command, but haven't managed to get it to run as per the docs. The documentation assumes that it is already installed and visible in the Java Web Console...
According to this documentation:
http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l6?a=view#gdjpi
An application for the Java Web Console should have a WEB-INF directory and an app.xml file. The apoc packages come with neither, so something is missing.

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

Table in PI JAVA only system & Report development in JAVA only system

Dear Experts ,
We are migrating from Dual to Single stack JAVA only PI system.
In Dual stack system all the message data are stored in ABAP table from which MONI pulls data .
But in JAVA only system how data is stored ..? and how to access those table ..?
we need a report to develop which will have these data .
Interface name
Date & time of run
Key Data (if possible would like to see key data from the run, for example po number, material number, part number, idoc number would all be considered key data)
Pass/Fail flag
Error Message (only required if the run failed)
How & where to write code to develop this report ...?
thanks
Shakif

Hi Shakif,
Look at this link:
Message details and AuditLog from Java Stack using Custom WebService
and this link about the Java Data Browser:
Open SQL Data Browser - Process Integration - SCN Wiki
Best Regards
Harald

Sun Java enterprise System 2005Q1 installation problems

I have installed 2005q1 parts in my solaris 5.8 box and had some problems running sussessfully portal server and access manager. So I had to uninstall them again.
The uninstaller from /var/sadm/prod/entsys/uninstaller did not give me option to un install all components, so I have removed some packegs using pkgrm command.
Now I am trying to reinstall webserver/directory server/access manager again and now getting the follwoing problems.
Screen for selecting Type of Configuration
1. Configure Now - Selectively override defaults or express through
2. Configure Later - Manually configure following installation
Select Type of Configuration [1] {"<" goes back, "!" exits} 2
Ready to Install
The following components will be installed.
Product: Java Enterprise System
Location: /var/sadm/prod/entsys
Space Required: 110.11 MB
Sun Java(TM) System Web Server 6.1 SP4 2005Q1
Sun Java(TM) System Directory Preparation Tool
Sun Java(TM) System Directory Server 5 2005Q1
Sun Java(TM) System Access Manager 6 2005Q1
Identity Management and Policy Services Core
Access Manager Administration Console
Common Domain Services for Federation Management
1. Install
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}? 1
Please wait while the installer upgrades and installs shared components...
Java Enterprise System
<<<< That is all , after that system doesn't come out to next any more". It just hangs up there."
Please ,, Please advise what i am missing??????
Thanks
Srini parise
jpsrao@hotmail.com

it seems that you have not uninstalled the previous entire installation. You can clear all installation manually. first, you need remove all information about your previour installation in "/var/sadm/install/productregistry" file, and then deleted the previous installation directory , now suppose you can reinstall it successfully again, good luck!

Manually delete Transport system - Sandbox system

Hi All
I am have a problem with our transport system on or sandbox system and basically what I want to do it get rid of it and set it up locally.
As our system is a copy of our PRD it still has all the old config, what I would like to do is remove it in the database. Does any one know how to do this?
It is a bit of a 'fudge' but seems the easiest way to do it.
Many Thanks in advance
Phil

hello,
Just delete (if necessary) the STMS configuration and describe your transport planning so that we can help you.
Manoj

Java.lang.system and InputStream

java.lang.system has 3 fields defined:
static PrintStream err;
static InputStream in;
static PrintStream out;
As InputStream is a abstract class, can it be used to declare a variable? If so, how to instantiate?
Thanks

java.lang.system has 3 fields defined:
static PrintStream err;
static InputStream in;
static PrintStream out;
As InputStream is a abstract class, can it be used to declare a variable? If so, how to instantiate?You cannot create an object from an abstract class; you can create an object from a sub class of
that abstract class, and that's exactly what that Stystem.in is refering to, an object from a sub
class of the abstract class InputStream. This sub class still IS-A Inputstream and all you have
to know that it behaves exacty as an InputStream.
Think of it this way -- 'birds' by themselves do not exist; sparrows exist and parrots and penguins exist.
Still you can point to a penguin and say "hey! That's a bird". And so is the object refered to by the
System.in variable an InputStream.
kind regards,
Jos

Issue: non-root access to Java Desktop System

Hello,
Rookie here. i have been using Solaris 10 with no problem and accessing the GUI thru the Java Desktop system with no problem. i created a new non-root user 'user1' on the system with all default parameters assigned to the user when doing 'useradd user1'. these default parameters assume a default home directory is assigned to the user, correct? i am able to access the system with 'user1' via console and remote, but i cannot access the GUI thru the Java Desktop system with this user. It accepts my credentials then it flashes a couple of times and sends me back to the welcome log-in screen.
Are there additional permission that i need to grant this user to access GUI via JDS? i'm able to do everything else as normal. Any help is appreciated.

doing 'useradd user1'. these default parameters assume a default home directory is assigned to the user, correct? i am Incorrect. man useradd paying attention to -d and -m. Solaris defaults to /export/home and will usually throw an error if you try to use /home as it's controlled by the automounter.
If it's just a test user account then userdel followed by useradd again.
alan

Java Desktop System Login to Zone?

Hi all.
I have installed Solaris 10 (Kernel version: SunOS 5.10 Generic_137138-09) for i386. I have created a single non-global zone which runs happily and that non-global zone can be accessed with SSH remotely and locally by root. Zlogin also works for my zone. Additionally, the zone seems to be running an X server because if i "ssh -X myzone" I can run graphical applications in my zone (like xclock) from the Java Desktop System in my global zone.
Now, what I would like to do, if possible, is to login with the full Java Desktop System to my non-global zone. When presented with the graphical login screen on the console I choose "Options" then "Remote Login" then "Choose Host From List", I see my non-global zone on the list. So I then highlight my non-global zone and click "OK". I am returned to the login screen. But it still says "Welcome to <my global zone>", and when I logon I am still in the global zone. I also tried typing in the non-global zone name in Options -> Remote Login -> Enter Host Name, but still no luck.
So, what might I need to do to login with the Java Desktop System to my non-global zone?
Thanks in advance!!
John

Is there any particular reason why you did the minimum install? I perform an "Entire Distribution without OEM SUpport" installation, and select everything except the Documentation (since there is no documentation CD - go figure) and the Java Enterprise System (since I do not need to run those servers). I do install the Companion CD which contains a lot of the software.
When the installation is finished, the Java Desktop System is up and running, after tweaking XFree86, of course.
Unless you are **REALLY** hurting for disk space, you might as well install the entire distribution. They claim that you need 9 GB or so, but in reality I've been able to install it on a 4 GB hard drive.
As to where exactly it's located, I'm not sure because it's always been installed for me. If you can, reinstall with an Entire Distribution and the additional software selections that I mentioned. You'll have JDS.

Java Desktop System Release 3 - Login problems

Hi all,
This is my first post here so apologies if I'm in the wrong area. I've recently installed Solaris 10 (5.10 Generic_118833-36) onto a V245. I wanted to see if I could get the gui desktop to work so I downloaded/installed Hummingbird Exceed on to my Windows XP workstation. Having launched Exceed XDMCP broadcast I could see my host in the list so I selected and clicked OK. I was instantly presented with the blue login shell, so good so far. In options, sessions I chose Java Desktop System release 3. When I tried to login as root the login shell just dies and disappears but If I use a non-root account it takes me all the way in to the desktop gui. The same thing happens if I use select CDE as the session type as well.
So my question is how do you login as root?
I gues it's a config file somehwere that needs a tweak but I've not been able to find anything helpful on Goolge so far.
Any help is most appreciated.
Thanks
Jon Barker

I just removed the locales using the same tool and I can log in now.
Does anyone have any idea why this is or the correct way to install extra locales ?
Thanks

XI (java transport system)

Similar Messages

Maybe you are looking for