XI Mapping - create one Field after crashing

HI,
we have a big problem cause our XI Mapping (ORDERS IDOC) crashes in (only) PARTN in Segment E1EDKA1.
If i open it in graphical layout my systems runs to 100% CPU-Usage but nothing will be displayed. The XI Mapping freezes and is only to be killed by a taskkill.
Every other Field in this mapping works fine, even PARTN fields in other E1EDKA1. I suppose it´s a problem of Support Stack 14(look at SAP-Note 855471). It´s a big mapping with 7 ifwithoutelse, copyvalue and valuemappings.
Solution: I want to delete this E1EDKA1-PARTN and create a new one or a better solution would be to edit/change the current mapping field.
But ... I can´t find a way to delete and create a SINGLE Field or to display our current one.
Do you have other way´s to edit a graphical mapping ? Maybe by text ?
Regards,
G. Breuer
I found a way to create(copy) one single field but it would be better to change the old one ![/edit]
Message was edited by: G. Breuer

hi,
this is a know bug with XI.
please goto the exchange profile via URL
http://server:port/exchangeProfile, goto
IntegrationBuilder in the left tree and increase parameter
com.sap.aii.ib.client.jnlp.j2se.maxheapsize from 512m to 768m (or higher
if necessary). Press the save button.
Goto http://server:port/rep/support/admin/index.html,
press AII Properties on the left side and then press the REFRESH button
until you see the new value on the right side.
cheers,
naveen

Similar Messages

Fresh Install (10.9.1) Unable to create OD accounts after crash and reboot

I have a real big issue and I was hoping if someone could help me out or point me in the right direction.
I have installed a new Server (10.9.1) for a client and everything has been working fine for over a month now, DNS resolving, users being able to login etc, no issues at all.
But today (last night) the server crashed and they rebooted it, and today when i try to add a user I get an error:
existing connection is not authenticated: password change denied
I OK it then Cancel the adding, but find the user being added (bizarre!)
When I try to setup the user email on the server for testing, I get an error with password being wrong, and I can't change the user password, with reset password the drop down just stays there and I have to cancel it.
As a note, all current users within the OD are working fine. And as a test I tried to change a password for a current user and getting the same issue above. They are not mobile accounts, the server is being used for Email, Cal, Card, VPN and AFP only.
I have had this issue before when installing a fresh server and the way I fixed it was to delete the OD and start again, but this time I have many users with a lot of emails/data so I need to be able to fix it rather than starting again.
I have checked the DNS, flushed it, rebooted to no avail. Also I have cheked and tried fixes that have been posed on this form but most are talking about migration erros, even so they don't seem to work.
Has anyone else had this issue? and fixed?
Mac mini 2012 16GB 10.9.1
Server 3.0.1

Process with success:
unzip the packet in: C:\APEX
1. Install:
@apexins SYSAUX SYSAUX TEMP /i/
2. Change to password:
@apxchpwd,
3. Run apex_epg_config.sql
On windows:
@apex_epg_config.sql (page 30, the guide of intallation)
Important:Replace SYSTEM_DRIVE:\TEMP by C:
E.g.: @apex_epg_config C:
After this, follow the next steps
4. ALTER USER ANONYMOUS ACCOUNT UNLOCK;
Finish! Just execute apxldimg.sql script if you is upgrading from a preview release.
Now try the connect on the browser IE6 o later:
http://localhost:8080/apex/apex_admin
Then create your workspace.
Edited by: [email protected] on 10/03/2009 11:59

Mail wants to create new account after crash

so, i ran out of batteries and my laptop just died. power attached, restart, my firefox session is there with all windows intact, but when i start up mail, it gives me the "welcome to mail" create account wizard. HELP! of course i know all my mail is there mel>library>mail, but how do i just 'bypass' this wizard to find my mail again?

Greetings,
how do i just 'bypass' this wizard to find my mail again?
You can't. Because you let your battery die (never a good idea), your mail preferences file is now corrupt and doesn't know you have any mail accounts. So you need to do this:
If all your mail accounts are POP:
1. Quit Mail.
2. Go to Home/Library/Preferences and delete the com.apple.mail.plist file.
3. Restart Mail and setup your account(s) again; Mail will automatically find your existing mailboxes.
If any or all of your accounts are IMAP:
Do steps 1 and 2 above.
3. Go to Home/Library/Mail and remove each mailbox beginning with "IMAP-".
4. Restart Mail, setup your accounts again, and wait for Mail to download your IMAP mail again.
In either case, check to be sure Mail is working properly again after the last step; if so, you can delete the IMAP folders on your Desktop and empty the Trash.

Is there a feature that allows the user to add another open field while completing a form? If I create one field to enter your child's name and social, is there an "add" button to create another field if the user has more than one child?

Name
Social Security
Child 1
Social 1
Child 2
Social 2

Hi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun

Mapping of Business One Field names to SAP R/3 Field Names

Hi experts,
We are downgrading from SAP R/3 to SAP Business One. I am having difficulties in mapping the SAP R/3 fields to Business One fields. Hope you could help me by providing the field names in R/3 linked to Business One field names.
Thank you very much

Hi,
I have ever used SAP R/3 and I knew that there is a feature to export data from SAP R/3 to excel.
I suggest export it first if you want to migrate data from R/3 to SAP B1. The data in the excel file could be used to enter into data transfer workbench (DTW) excel template file. DTW is an addon to import data into SAP B1 database system.
You could open this folder :
C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates
after full installation of SAP B1 (begin from server tools, server application, application client, SDK, DI API, DTW).
To know more about the column template definition and location in SAP B1, you could use SDK help center file. This file is only available if you installed the SDK. This helpfile could be used to know the fields name and meaning in all SAP B1 tables
Rgds,

Created "Hierarchy Field" not saved in Import Mapping File

Hello experts,
I want to save the mapping created after having imported categories via MDM Import Manager.
Everything works fine as I execute an initial import (In "Map Field" tab, I create a "hierarchy field" based on the three fields "Categorie Name, Categorie Name 2, Category Parent" and mapp the Split Hierarchy field consequently ).
My problem is as I save the Mapping and try to reuse it for a new Categories import, the former "hierarchy field" does not appear anymore. I assume Saving Mapping does not save created hierarchy fields...
Can anyone help me on this?
Thanks in Advance
Stephane Naigeon

From XML, with fields "Category Name, Category Parent".
Then in MDM Map Tab, I clone the Field "Category Name" and create the Hierarchy Field with name "Categories", parent field "Category Parent", Child Field "Category Name", and Node name field "Category Name Clone".
Then I map the Split Hierarchy field with the destination field "Category Name [DF]", and the source field "Category Name" with the Remote Key.
The matching field in Match Record Tab is "Category Name [DF]".
I save then the mapping file but am not able to reuse it : as I said, the Hierarchy field disappears !

On activating persistent class: There is no mapping for one or more fields

Hi all,
I'm using an ECC 6.0 system.
I've just created a persistent class and defined the persistence. When I try to activate the class activating fails and I get the message "There is no mapping for one or more fields."
I did not, in fact, use all the fields of the database table I defined the persistence on. When I do use all the fields activating the class works without a problem.
However, as far as I know it should be possible to select only some of the fields when defining the persistence (the only fields I have to select are all the key fields of the table and I've done this).
Has anybody encountered the same problem or has anybody any idea on this?
Cheers,
Kathy

Hi Kathy,
this is exactly what I meant.
If you'd like, then you can also take a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/b0/9d0a3ad259cd58e10000000a11402f/frameset.htm
There under Mapping, you can find:
"You must map all columns of a database table to attributes. If you only want to manage some of the columns using Object Services, you must create a database view."
Making attributes private doesn't change the fact, that you still map all fields. If you have a lot of fields, which you don't want to map, then I will again suggest, that you define a DB-view. This will boost the performance of your implementation.
In case you need "quality 1st" performance, then I would suggest to use an ABAP implementation with internal tables, instead of the Persistent Service.
HTH,
Hristo

Mapping Dock Version field in Shipment Create

Hi Guru's
i am facing problem in mapping dock version field in shipment create. Details are as fallows..............
Dock Version reference number is mapping to VTTK-TPBEZ(Shipment Description) from TIBCO. And the reqiure ment is there was a field VTTK-ZZVERSION (z field). I need to map VTTK-ZZVERSION field to (Basic type TPSSHT01)
Segment E1TPSHH-DESCRP which is typically linked to TPBEZ.
i have to make changes in the ZFM(Shipment Idoc Create). After executing the function module shipment will be created.
And when i run the Transacion VT03N in TAB IDENTIFICATION the "Shipment Description" field should be blank.
Thanks in advance..........

Hello.
I have no solution to your problem, but I have noticed something which I very much need. I want to be able to extract entries from JAR file which I specified in JNLP application descriptor. The word is about COM libraries which I want to copy and register on every client. But I have no chance to open JAR file which is specified in the JNLP app-desc.
In your code, you do this:
InputStream bla = clazz.getResourceAsStream();
which is not different from delegating the call directly to class' ClassLoader, which is the thing I do. I refer to the JAR file without path, like this:
InputStream huh = this.getClass().getClassLoader().getResourceAsStream("some.jar");
Returns null pointer. As far as I know (I tested it before) Java Web Start does not put its cache paths in "java.class.path" and "java.library.path" system properties, so I cannot hope to know certain path from which I could download my JAR.
So, is there a way to access those JAR files, to copy them locally somewhere, to extract files from them, etc?
Dimitar

How to make non editable field after requestor created the shoping cart

Hi,
i need to make non editable field (Price field) after requester created the shooping cart.The field should be non editable only for requster .
this i need to make when workflow triggers when the buyer sends back the shopping cart to requester.
one solution which i found:depend on the status of the shoping cart
but i dont know whether it is correct way.
if not please suggest me the solution.

Hi,
You can implement the BADI" BBP_UI_CONTROL_BADI".
You can check for the role of the user who has logged in(e.g. for user REQUESTER,there will be a distinct role to idnetify that the user is a requester) and then acc set the display properties for the field PRICE.
For sample code pls refer the foll links:
Sample code for BBP_UI_CONTROL_BADI
Re: Hiding Shopping Cart Fields in SRM 3.0
Re: How to Hide the attributes from template BBPSC01?
Re: How to validating total value in shopping cart
Re: Price filed in Shopping cart should be in display mode
BR,
Disha.

Join 2 fields into one to map to destination field

Hi! Is it possible to join data in 2 fields into one to map to the destination field? I have image file name kept in one field and want to prefix with a URL which I hope to maintain in a manually added field. Alternatively, it will be great to be able to prefix the image filename with the URL to be mapped to the image destination field.
Any help is very much appreciated.
Thanks!
SF

Hi,
Yes it is possible to combine values from two fields to map a single field of MDM repository using Import Manager. This feature of Import manager is called as Field Partitioning.
You can do it by following below mentioned steps:
1. Open import manager and connect to source file.
2. Specify source and destination tables. expand Source Table under source Hierarchy in Import Manager. And click on first field to select it.
3. Now Go to "Partition Field/Value" tab. In the Source Partition sub Pane you will see your First Field under "partition by" (* because you select first field from source hierarchy).
4. From source Partition sub pane under "Available Fields" select the second field and click on "Add". This will bring second field also under "partitioned By".
5. Now select both Fields under "partition by" and right click and select "Combine" (*Combine option will be enabled only when more than 1 field is selected by "partition By"
6. Once you select Combine, it will combine values from both Fields. Again right click and select "Set combine delimiter" and specify the required value delimiter.
7. Now Go to "Map Field /Values" tab. You will see one more field (*starting with the name of your first field and ending with partition word. Map this field to the required destination field.
8. Follow other normal steps for data import and import data. after data import check data in data manager. you will get combined values from 2 source field in the MDM field.
Check Page no 203 of [import manager reference guide |http://help.sap.com/saphelp_nwmdm71/helpdata/en/4b/72b8e7a42301bae10000000a42189b/MDMImportManager71.pdf]for more details.
Please revert if you face any issue.
Regards,
Shiv
Edited by: Shiv Prashant Dixit on Mar 11, 2010 9:53 AM

I can not map field after changing data source location

Hi
I have a small problem that I got a report file and database from my customer, after that I setup database, open the file and change data source to my setting. but some filed can not map. The field mapping widonw does not display all field in the table. Of course I have checked the missing fields are existing in the table.
OS:Windows7
DB:Oracle11
CR:XI Release 2
Does anyone have an idea?

hi,
In Map Fields window, there is an option "Match Type".
Please Unchek that option, so that you will be able to see all the fields from that table.
Also, while mapping please verify the datatypes of source and target fields.
Regards,
Vamsee

I have a iphn 3gs running on ios 6.1.3 i buy it frm my frnd ..........n it has one prblm that safari mail n maps does't wrk it crashes all time when i try to run these ......plzzz help me what shoud i do ......i have tried reset many times bt it does't

i have a iphn 3gs running on ios 6.1.3 i buy it frm my frnd ..........n it has one prblm that safari mail n maps does't wrk it crashes all time when i try to run these ......plzzz help me what shoud i do ......i have tried reset many times bt it does't

use a computer and restore the phone http://support.apple.com/kb/ht1414

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

Creating form - want to change font style and size in more than one field at a time HOW??

creating form - want to adjust font style and size in more than one field at a time - HOW??

Select the fields with the mouse, right-click one of them, go to Properties
and set the settings you'd like them all to have.
On Wed, Jan 21, 2015 at 8:51 PM, chuckm38840797 <[email protected]>

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

You're welcome.
Going back to your original post:
5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
tt2

XI Mapping - create one Field after crashing

Similar Messages

Maybe you are looking for