XI - MDM - Web Dynpro Integration..

Hi,
Can you please explain me the steps used for integration of XI - MDM and Web dynpro integration..
I need the front end through web dynpro that has the data from MDM tables (Read / Write) and also store the data from MDM into a flat file with multiple records.
Thanks
Mamta

Hi,
Have you seen this weblogs:
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
/people/sriram.vasudevan3/blog/2005/09/01/mdm-55-data-distribution-using-sap-xi
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
/people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario
/people/steffen.nesper/blog/2007/01/05/master-data-management-posting-confirmation
---Satish

Similar Messages

Deploying MDM Web Dynpro Components on NWCE 7.2 - /wdconfig not displayed

Hi all -
I'm trying to deploy the MDM Web Dynpro Components Framework (the goal is to
have NW CE connect to and 'see' the MDM repositories) and according to the URL
http://help.sap.com/saphelpnwmdm71/helpdata/en/4a/8c20a0dc93203be10000000a42189b/frameset.htm,
one of the steps is to run the MDM Web Dynpro Configuration Manager application
(_http://<server>:<port>/mdm/wdconfig). However, I get an error stating the page
wasn't found (example: Error: Requested file /wdconfig does not exist).
Looking further, I see that WD Framework needs to be configured as a pre-req.
I'm in the JSPM and I see that MDM JAVA WD FRAMEWORK 7.1 7.11, MDM JAVA API Library
and MDM Java Connector needs to be deployed (JAVA API and Connector are first).
Under the 'Deployed Components' tab in JSPM, I see :
>> sap.com/MDM_JAVA_API - 7.1
sap.com/com.sap.mdm.tech.apireset
sap.com/com.sap.mdm.tech.connector
sap.com/com.sap.mdm.tech.mdm4j
>> sap.com/MDM_JAVA_WD_FRAMEWORK - 710.711 (SP05)
sap.com/tc/mdm/wdcomps/core/ear
I deployed MDM_JAVA_API first and have restarted the NWCE system.
I don't see any error in the logs and the URL for the /wdconfig still does not exist.
Is there something that I have to deploy? Can someone point me to a document other than
the help.sap.com that talks about CE 7.2 and MDM 7.1 configurations? I do have the master
and install guide for both.
Please advise!
Thanks!
-s

Update:
Hi - thanks for the followup.
I have the correct SCAs. I have done the following:
UNDEPLOY both components
Restarted the services
Deployed the JAVA_API first
Restart services
Deployed the Framework
Restarted the services
Yes, even though the docs said I can deploy them in order, I think there may have been
a few hitches that the error logs didn't catch.
Specifically, when I re-deployed the FRAMEWORK 7.1 7.11, there were now 19 components
listed instead of one.
I am able to go to ~mdm/wdconfig now.
However, I get a new message:
"You are not authorized to use MDM Web Dynpro Components Configuration Manager".
Even though I'm the Administrator?
I did see in the docs that I need to create a Project first and that the userID that logs in
should exist in UME and the MDM system.
(_http://help.sap.com/saphelp_nwmdm71/helpdata/en/4a/41a40c343f2ab1e10000000a42189c/content.htm)
I am looking into that now. I think I will close this thread and start a new one
specifically for that.
Thanks!
-s

Web Dynpro integration with R/3

Dear all,
We have the following requirement in Web Dynpro integration with R/3
We have to update the local SQL tables based on R/3 system return values. R/3 system should call the webdynpro business method for updating local SQL Status table. In the R/3 system after purchase order is created, via user exit it should call and update some fields in the local SQL tables. To solve this problem we have thought of following solutions possibility:
1.       In R/3 system based on user exit, it calls the ABAP Proxy -> XI (SOAP Adapter) -> Web Dynpro Web Service in WebAS-> XI -> ABAP Proxy -> User exit PO continues.
2.       In R/3 system based on user exit, it calls directly web service then web service goes to user exit.
3.       In R/3 -> user exit -> ABAP Proxy JDBC Adapter -> SQL stored procedure call - > user exit.
Please give your valuable suggestion or any other options to solve above problems.
And another one question is how to create web service and deploy into WebAS through webdynpro project?. Kindly guide us to the correct document for creating webservice through webdynpro or any other related url link.
Advance thanks,
S.Saravanan.

Hi Sarvanan,
Please refer to the following link for help on webservice,
Creating webservice, http://help.sap.com/saphelp_nw2004s/helpdata/en/db/99c04ba22fe64f96a8651df68eab92/frameset.htm
Consuming a Web Service in JAVA,
http://help.sap.com/saphelp_nw2004s/helpdata/en/81/12703e5da3e946e10000000a114084/frameset.htm
Consuming webservices in webdynpro,
http://help.sap.com/saphelp_nw2004s/helpdata/en/91/9c2226df76f64fa7783dcaa4534395/frameset.htm
I feel once you go through these links you yourself will be in a much better position to decide upon to your design options.
Reply back for more help,
Guru.

MDM web dynpro in BPM process

This is my first development in BPM, so please be charitable and understanding....
I have following error in my process:
Error: Build stopped due to an error: com.sap.glx.paradigmInterface.bpmn.compiler.BPMNCompilerException: [BPM.rt_c_bpmn.000024] I'm sorry, I'm afraid I can't do that: The data object 'UIResponse' does not have any type assigned to it
I have MDM web dynpro Item detail component embeed in my process in the human activity. I suppose that the problem is maybe in WebDynpro part, but I have no idea where - I was following the instructions given in e-book "How to integrate MDM with BPM", until now :-(. Do you have any idea what can be the reason of such error? I tried to find something in google, but no results for that....
Thanks,

Yes, I follow instruction "How to Integrate Master Data Management(MDM) and Business Process Management(BPM)", chapter number 5 - "Passing MDM Semantic Data between BPM Process Steps using wrapper application". In my example I need to have BPMStatus visible in the context - I don't know why yet, but it is empty now. The previous problem which I described above is already solved. I am not sure where the problem exactly was, nothing helped, so I decided to create new process from scratch. Now I am able to build the project (no error occur), but my contrainer is empty. I drag and drop it as it is descibed on page 58. The only one difference is that I made connection with BPM status.
Besides, I discovered strange thing in this documentation on page number 61 - specify event handler. I use CE ver 7.2, and I have different windows than here - I have methods, events and event handler in separate tabs. So, I created event and event handler in those separate tabs, and then I should be able to copy them to Intefrace controller, as it is described it instruction. But in interface controller I don't have tab "event handler". Do you know why is that? Is it enough to have event handler in Component Controller? Maybe this is the problem why I don't see my container and cannot complete task?
Regards and thanks for your replies,

Workflow & Web Dynpro integration - best practice?

Hi,
I am working on ECC6 and EP7 and looking at building some workflow approval scenarios for Travel Management. I need to move away from the SAP supplied approval scenarios to meet our business requirements.
What I'm looking for is a 'best practice' for integrating a Web Dynpro application (for ABAP) which will be the basis of our approval workitem. I have seen a number of presentations which talk about integrating the user decision task (BOR object DECISION) into a web dynpro application. I have also seen an approach where the FM WDY_EXECUTE_IN_PLACE is used to call a Web Dynpro application from within a BOR object method.
I guess I'm wondering if there is an approach that provides a cleaner integration then either of the above approaches as they both appear (well to me anyway!) to have limitations. Is there a way for example of implementing an ABAP class method as the basis of the approval task that cleanly integrates with the Web Dynpro application?
Any suggestions would be greatly appreciated.
Thanks in advance
Michael Arter

Hello,
Are you going to use the Universal worklist in your portal? If yes, that will bring you more possibilitites. Then you don't have to code anything into your business object - instead in portal (UWL configuration) you can define what which WD application is launched when the user clicks the task in UWL.
If you are going to use business workplace and just launch WD applications from there, then you probably just need to use WDY_EXECUTE_IN_PLACE (or any other suitable way to launch WD application from ABAP).
>Is there a way for example of implementing an ABAP class method as the basis of the approval task that cleanly integrates with the Web Dynpro application?
Yes, but what is really the need for this? Did you know that you can replace the methods of your BO as methods of an ABAP class? Just implement the IF_WORKFLOW interface for your class, and you can use it in your workflow then just like the BO. If you want to "replace" the whole BO with your ABAP class, just take a look to Jocelyn Dart's blog series about the subject. But as I said, it is not really necessary to do this - especially if you already have lot of custom code in your custom business object - then it is probably a good idea to continue using it for your custom stuff.
Regards,
Karri

Make an iView from MDM Web Dynpro Component

Hello!
I have read documentation about configuration of MDM WD Component.
What I have found - MDM WD Components are used as standalone application and inside BPM.
But what about iView?
How to make an iVIew from MDM WD Component and to link it with Configration? Is it possible to use Application Parameters property?

I have experimenting with MDM WD Components and what I have found that my approach don't work
It is not possible to work with MDM WD Components like old MDM Portal Content because there is no client events.
But is possible to create WD application wrapper for each layout (portal page) and configure it by iView property - Application parameters.
For example wrapper for layout - Search panel on the left, another search panel, result set and item details on the right.
I have a question for all:
What doy you think is there a need to request SAP to include such wrappers into SCA file with MDM WD Components?

Can we use MDM 7.1 Web Dynpro UI with MDM 5.5 ?

Dear Experts,
Is there any possibility to use new MDM Web Dynpro UI (which has got released with MDM 7.1 SP04).
with MDM 5.5 SP6 as a backend.
I wonder, if we deploy MDM 5.5 Java API with MDM 7.1 Web Dynpro components,
then it should work with MDM 5.5 setup also!
Any thoughts on this?
Regards,
Shailesh.

Hi Shailesh,
Is there any possibility to use new MDM Web Dynpro UI (which has got released with MDM 7.1 SP04).
with MDM 5.5 SP6 as a backend.
As per my knowledge is concern for MDM7.1 will support .NET API,ABAP API.......
I wonder, if we deploy MDM 5.5 Java API with MDM 7.1 Web Dynpro components,
then it should work with MDM 5.5 setup also!
I dont think so....
Thanks
Yugandhar

Field length change in Web Dynpro Components iView

Hi,
We are using SAP MDM Web Dynpro Components - Configuration Manager (NW7.3) to develop the UI. One of the issue while disply field is, Though field maintained in MDM has only 2 charaters UI that displays a full-screen-width field.
I would like to display actual field length maintained in reposiroy for each field. Is it possible??
Cheers,
Rc

This is closed.
By mistake Raised Twice....I guess I need break

Adobe Interactive Forms without Web Dynpro and ACF???

Hi All, we would like to build an interactive forms solution based on the Adobe software integrated into WAS. However, the customer requires a true thin client application with no additional installation on the client. Integrating Adobe Interactive Forms into Web DynPro however requires the Active Component Framework (ACF) to be installed since these forms are integrated into the page within an ActiveX container.
So the question is whether there is a way to use Adobe Interactive forms including the Adobe Documents Service within WAS but without(!) using Web Dynpro?(the full blown Adobe LifCycle Forms solution is not an option). Any suggestions on this are highly appreciated!
Tanks!
Frodo

Hello everyone,
I would like to add a couple of points from the SAP Product Management perspective.
Adobe has a number of stand-alone products that are the foundation for what SAP can now offer thanks to our partnership. This is exactly why we decided on a partnership that provides us with established technology, which is now integrated.
It is true that Web Dynpro is the main SAP way of integrating the interactive functions of the solution. We made this decision consciously, because the development and run-time environments provide very useful features that reduce the need for manual coding, such as the possibility of passing the data back to the backend using the Web Dynpro context. The automatism we offer here needs to be implemented from scratch with any other solution, including the Adobe stand-alone one.
While it is true that the ACF constitutes a certain limitation for the reasons you mention, Adobe will remedy this in 2005. The Reader/Web Dynpro integration will be available later this year for multiple platforms (OS, browsers) and will not require ACF anymore.
If you do not want to use a full-blown Web Dynpro application for your concrete scenario, consider developing an application that provides nothing but the interactive PDF form to the end user, to be filled in using the stand-alone Reader. The submit of the form data (with or without the PDF itself) could then happen via HTTP or e-mail.
Kind regards,
Markus Meisl
SAP NetWeaver Product Management

Using Java Web Dynpro iViews to integrate with SAP MDM

Hi,
I have already SAP MDM 5.5 supplied iViews with Enterprise Portal.
These include itemDetail iView, ResultSet iView, PicklistSearch, Hiearchy Search.
Now, I am integrating Java Web Dynpro iViews with SAP MDM.
When adding the fields using object of ResultSetDefinition Class, should we use MDM Table Name or MDM Table Name Code/MDM Field Name or MDM Field Code?
I think we should use the CODE as the name as it does not contains any space while working with Java API.
Regards
Kaushik Banerjee

Hi Kaushik ,
Yes you should use the Field and Table CODE when integrating MDM with any other system using API either Java, Abap or Com api.
Actually this is one of the main use of the code in MDM .In API.
Hope It Helped
Thanks & Regards
Simona Pinto

Integrating Flex/Flash in Web Dynpro ABAP(Netweaver 7.0) need info!

Hi all,
I need to embed a flash or a flex object inside a web dynpro abap application.I am working in Netweaver 7.0 and i don't have enhancement pack 1 installed.Is it possible ? If it is possible can anyone please provide me the coding and configuration details.
Thanks,
Saikat

I'm afraid that the SAP supplied integration technology - call FlashIslands - is only available from NetWeaver 7.01 and forward. You could perhaps do some simple integration (very little data transfer) with the iFrame UI element - although the iFrame is deprecated in 7.0 and 7.01, but does return to full support in 7.02. The other option would be to use the NetWeaver Portal or NetWeaver Business Client and have two iViews within the page. One iView would have WDA and the other some external technology (BSP, JSP, etc) to host the Flash/Flex content. Not tight integration, but you could potentially use Portal Eventing to at least communicate events.

Web dynpro with adobe integration is not working in quality system

Hi Experts,
We have developed a web dynpro component with adobe flex integration. In development system everything is ok. Now the object moved to quality. In quality we are not getting the landing page. I checked in debug mode that the control come into SAP and code got executed. Finally the message which is issued from SAP is displaying in the page but the remaining page is blank. What reason might cause for this defect. If any one faced same kind of issue earlier. Respond to my request if you know the answer.
Cheers,
Bujji
Moderator Message: Webdynpro have their own forums. Please post your question there.
Edited by: kishan P on Sep 13, 2010 5:35 PM

Hi Romero,
Ur guess is correct, i have investiagte in the system, the variants saved a $tmp, thats why it is not migrated.Later i migrated the variants. Now it is perfectly working. Thanks for the inputs.. Sorry for the delay response.
Thanks
surendra

Problem in submit button on adobe form integrated with web dynpro

Hello,
I'm facing prob in triggering web dynpro event onSubmit for Interactive form.
I've created a submit button from web dynpro activex pallete on adobe form (integrated with web dynpro) to send the form as email.
Then in the web dynpro view where this form is embedded i have created an action against onSubmit event and called a method within this.
However, on clicking Submit button this event is not getting triggered.
Please let me know what is lacking in this process?
Thanks.

Hi,
I am also facing the same problem. i have developed a simple scenario under which user have to input his/her details and on submit button it will be updated to database.
I have tried the above solution but after adopting this solution all the editable fields become non-editable.
so the above solution is not working for me could you help me out.
I think ... try this....
When you create the Adobe Form from WebDynpro, you need to follow one step in SFP Transaction or inSE80 transaction. Open the Adobe Form in any one the transaction and now in SAP menu bar "Utilities" in that you will find the "INSERT THE WEBDYNPRO SCRIPT" just click on that one. Then you will see a new Script Object is being created with the name "ContainerFoundation_JS" under the "Variables" in the Heirarchy of the Object Pallete of the Adobe Form.
This step is mandatory to use the SUBMIT Button of the "WebDynpro Native", to trigger the OnSubmit event of the WebDynpro.
Thanks
Edited by: shailendra2sap on Mar 6, 2009 12:24 PM

Couldn't complete tutorial 'Integrating EJB 3.0 into Web Dynpro ...'

Hi All,
I am trying to complete the Integrating EJB 3.0 into Web Dynpro Using the EJB Model Importer tutorial that goes with SAP NetWeaver Composition Environment 7.1 SP3 Developer Studio.
Does anyone ever completed this tutorial because I have problems completing it. The result is very important for me because I need to use this technology for my essay.
In this tutorial you create a button that calls the method StudsBean.getStudent(String). In this method the object student is created and it will be returned. In several labels the information of the returned student should be displayed. But that doesnt happen, when I push the button no error occurs but the labels are still empty. When I try to debug the Enterprise Bean and Web Dynpro application I see that the method StudsBean.getStudent(String) is called and the propertys are set and the student object is returned, but still it isnt displayed.
After discussing this with a colleague I tried to search for a solution on the SDN and of course Google. First I thought I would be a bug but I only found 2 people with the same problem. I found it remarkable because its one of the key subjects of Java EE 5 and its a tutorial displayed in the welcome page of the Developer Studio.
So do you people think its a bug in WebDynpro? Because I am sure that I followed all the steps mentioned (a colleague checked it even).
Regards,
Sander

Hi Sander,
I guess, it's not a bug in Web Dynpro, maybe it's a bug in the tutorial
I tried something similar, but not following the tutorial and it works. I wasn't able to call the model from the view controller and I guess that's the problem. Take the code from the init-method of the view controller and put it to the component controller's init -method and the code inside the onActionGetStudent and put it into a method you create in the component controller, too. From onActionGetStudent just call this method in the component controller with some code like this:
wdThis.wdGet<your component controller's name>.<your method's name>;
Hope this helps
Kind regards
Stefanie

Problem with image loading in flex (with web dynpro ABAP integration)

Hi,
I am working with integration of flex and web dynpro abap. I am facing unusal problem while loading the images. I have the images in the MIME folder of web dynpro application. Since my swf file and all the images that I want to use are in the same folder(MIME), I am accessing them giving just the image name as source for the image in flex.
By this method I get the images sometimes, but not everytime. So could anyone suggest me alternative method.
Regards
Prashant Chauhan
Edited by: Prashant8809 on Jul 17, 2011 11:56 AM

Hello Prashant,
you need to mention the full path as source for the image in flex.
ex. if your WD application name is Z_TEMP and image file name in mime folder is 'image.jpg' then you need mention the source in flex as
http://servername:50001/sap/bc/webdynpro/sap/Z_TEMP/image.jpg
Hope this solves your problem.
BR, Saravanan

XI - MDM - Web Dynpro Integration..

Similar Messages

Maybe you are looking for