XI message processing statistics / reports

Hi gurus,
are there any statistics available for XI? like messages processed per interface durong some period etc.
thank you,
Olian

hi
these are some tables availabele
provide the criteria to view the data accordingly
MSGSTATE-join SXMSMSTAT and SXMSPMAST based on MSGSTATE.
SXMXPMAST..the master table for the messages(in each pipeline ..one entry i think..), you might want to look at another table - SXMXPVERS.
final message state is stored in SXMSPMAST.it is an intermediate table for holding messages temporarily.
regards
chandra

Similar Messages

Statistics (overview) for Synchronous messages processed via AAE

Hello,
We are on PI 7.11
Is there any way to get synchronous messages processed via AAE displayed on RWB Message Monitor Overview view?
Maybe there is some parameter available similar to messaging.syncMessageRemover.removeBody for persisting payloads for sync messages.
Thanks!
Best Regards,
Artsiom Anichenka

Mark,
But I think there is already (PI 7.11) a possibility to persist payloads for java-only sync messages. I was mentioning this parameter in my original post:
messaging.syncMessageRemover.removeBody
this parameter is true by default and if you set it to false payloads will not be deleted, but this is not our aim. We want payloads to be deleted from sync messages, but we also want to see those messages on RWB MessageMonitor for overview.
For me this is somekind of frustrating that the overview page doesn't really give you overview of what is happening on your system, like what and how many messages where processed...
So can you please specify what is really planned for 7.31. Did you meant that parameter I am mentioning above or we will really get sync java-only messages to overview?
Best Regards,
Artsiom Anichenka

Gather Schema Statistics Report taking more than 13 hours to complete is it normal?

I have run Gather Schema Statistics Report at 9 pm and it completed on 11am next morning. It almost took more than 13 hours, is this behavior normal.
I have used the following parameter.
Schema name: ALL
Estimate percent:50
Backup Flag :NOBACKUP
History Mode :LASTRUN
Gather Option:GATHER
Invalidate Dependent Cursor : Y
My database size is about 250 GB.
Please reply

Gather schema stastics is erroring out when i'm using the GATHER_AUTO option with 10%.
Here is the log file
+---------------------------------------------------------------------------+
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDGSCST module: Gather Schema Statistics
+---------------------------------------------------------------------------+
Current system time is 13-AUG-2013 10:42:12
+---------------------------------------------------------------------------+
**Starts**13-AUG-2013 10:42:12
ORACLE error 20001 in FDPSTP
Cause: FDPSTP failed due to ORA-20001: SYS_NTGNSVL1S+OCZGRAAHKD9MYG== is an invalid identifier
ORA-06512: at "APPS.FND_STATS", line 774
ORA-06512: at line 1
The SQL statement being executed at the time of the error was: SE
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
In GATHER_SCHEMA_STATS , schema_name= ALL percent= 10 degree = 8 internal_flag= NOBACKUP
ORA-20001: SYS_NTGNSVL1S+OCZGRAAHKD9MYG== is an invalid identifier
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 13-AUG-2013 10:43:29
+---------------------------------------------------------------------------+
I have used the following parameters
Schema name: ALL
Estimate percent:10
Backup Flag :NOBACKUP
History Mode :LASTRUN
Gather Option:GATHER_AUTO
Invalidate Dependent Cursor : Y

XI message processing is very slow

XI message processing is very slow.I did everything in tuning guide, but it is still very slow.
I executed <b>DB13-->Check and update optimizer statistics</b>
XI message is faster in another XI server.Although another XI server's hardware is weaker.
I checked DB2 tablespaces and extend them.
What can I do for higher performance?
Thanks.

Hi Cemil
The following thread can throw some light on what you are looking for..
Where could I find the information about XI performance?
Also, check the following pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3fbea790-0201-0010-6481-8370ebc3c17d
Regards
krishna

KM Statistics Report

Hi -
Under KM /Admin Guide / Content Management / Reports, I see a Statistics Report described:
Use
You can use this report to evaluate and search the content of KM repositories using different criteria. The report searches all repositories, regardless of whether indexes exist.
You can use this report to answer the following questions:
·        How many files larger than 5 MB are located in the documents repository?
·        How many ZIP files are located in the documents repository?
·        How much memory do the files that have been created beneath /documents/Public Documents in the last 14 days need?
My question: Where can I find this report? I see it under Content Administration / KM Content, but where would I actually run it so that I can specify the settings I want to use when I run the report, e.g., "Maximum number of results"?
Thank you!
Message was edited by: Jo De Hart

Jo,
I'm glad I could help you! Would you be so kind to thank also "SDN"-way? For this just<b> mark the thread as a question</b> an rewards some points! See this link for some more information regarding the "Points Reward System": Spread the Love!
Thanks,
Robert

Statistics report using ABAP- SXMB_MONI output

Dear all,
I would like to create an ABAP report which should giveme the details of one particular interface. The details are like How many messages processed, how many of them are success status and how many of them are in error status on daily basis.
Ideally this is like our SXMB_MONI output where we can choose Sender interface and time interval to get these details. But i want to have a daily job to run this query only for one interface.
Is it really possible? If yes, how?
Note: DO NOT SEND any links for SAP PI enhanced monitoring, Payload Search using ABAP report..etc. i had implemented this in my project:)
Thanks
Rajesh
Edited by: Rajesh on Jan 25, 2011 2:38 PM

Not sure if you already refered this
http://wiki.sdn.sap.com/wiki/display/Snippets/PIMonitoringFunctionality-FetchingDatafromSXMB_MONIStandardTables-PartIII
Regards,
srinivas

BEA-473225: Aggregator rejected statistics reported by server...

I am getting occasional errors and warnings associated with the WLI-Monitoring Runtime subsystem in my WebLogic logs supporting my ALSB installation. Errors and warnings include:
BEA-473224 Aggregator did not receive statistics from...
BEA-473225 Aggregator rejected statistics reported by...
BEA-473233 Timer (checkpoint) has been triggered...
I could not find reference to these errors in any message manual. Can anyone provide additional insigt into what these messages indicate?

I am using ALSB version 2.6. Of the three errors (warnings) mentioned in my original post, the one occurring most often is BEA-473233. I see this warning just about every two hours. About once or twice a day it does seem to work and no warning message is generated. The other two messages (BEA-473224 and BEA-473225) have shown up about 12 times each in the last 2 weeks.
I did find reference to these messages in the ALSB documentation, but their description is a bit thin. The messages appear to indicate some sort of communcation issue between the managed servers, but I cannot detect any adverse impact from these messages. There is no other indication of communication issues between the managed servers in the cluster that I can see.

Resource Statistics Report of KM

Has any body ever used the Resource Statistics Report of KM ?
I have a couple of questions on the same
1. Does it work with File System Repository Manager?
2. I basically want a log report for the following operations
     a. user uploads/creates a document
     b. user deletes a document
     c. user edits locally / edits online
Is it possible to track the above operations at a user level?
I have tried various combinations in the "parameter" tab of the report but am not able to achieve what I want.
If anybody has any experience with this report, kindly share it.
Thanks in advance,
Akhilesh
Message was edited by: Akhilesh Mahto

Hi,
Second issue:
open your report> goto parameter or create new report add the location and goto parameter tab>cheact List Matching Items: . It will show the results.. I got the result.
Regards,
Kumar

Check the message processing

HI.
I want to catch the status whether message is processing or not on Adapter Enging and Integration Engine.
Offcource we could know the status , to logon the RWB.
But I want to check from scheduled scripts.
If the message finished processing the message , job scheduler start the next job...
regards,

Hii
You configure CCMS monitoring :
XI : Configuring CCMS Monitoring for XI- Part I
CCMS Rule Based Monitors configuration guide for Dummies
Event Log Monitoring using CCMS Agents
Configuring CCMS Alerts for the Adapter Engine
If processing of a message on the Adapter Engine fails, the message state is changed to faulty. To notify administrators immediately of such processing failures, they can be propagated as alerts to CCMS. As CCMS is the SAP standard interface to third-party monitoring tools, these failure events may also become visible in non-SAP monitoring tools.
Configuration Steps
To make use of Adapter Engine alerts, you must configure the connection to CCMS as follows:
1. Make sure that the J2EE engine on which the Adapter Engine is running is configured to be monitored by the central CCMS system.
To do so, execute transaction RZ20 on your central monitor server. There, the J2EE engine should be visible in the CCMS monitor under SAP J2EE Monitor Templates All Systems. If not, follow the steps described in Chapter 4.2 of the Supportability Setup Guide for SAP NetWeaver 04 on SAP Service Marketplace at service.sap.com/nw04operation.
2. Check whether the Adapter Engine is configured to report errors to CCMS.
To do so, start the Visual Administrator and select service SAP XI AF Core. The value of property CCMSEnabled must be set to true (in lower case letters). If it is not, change the property value to true and restart the service.
To verify that the setting is effective, select the Visual Administrator Monitoring service. Under Root Applications, you should see a node for the Adapter Engine.
Alerting
Once you have performed the configuration steps in the previous section, errors that occur during message processing in the Adapter Engine should show up in both the Visual Administrator of the J2EE engine on which the Adapter Engine runs, and transaction RZ20 on the central monitor server:
Open the Visual Administrator and select the Monitoring service.
Here you should see that the number of errors of the appropriate error category and error code increases when messages fail on the Adapter Engine.
Execute transaction RZ20 on the central monitor server and select the Exchange Infrastructure monitor.
You should find a node for the Adapter Engine here and see the same error information as in the Visual Administrator.
Accuracy
The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the Visual Administrator as follows:
1. Select the Monitoring service.
2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
3. Choose Configuration in the right-hand pane.
4. Choose Edit in the dialog box that appears.
5. Change the polling period to 5 minutes, for instance.
6. Choose Save and wait until saving is finished (be patient, since this may take a while).
7. Select the Configuration Adapter service.
8. On the Display Configuration tab page, select apps sap.com com.sap.aii.af.app Monitoring Configurator monitor-configuration.xml.
9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
10. Choose OK to save the modified xml file.
11. Restart the Monitoring service to apply the changes.

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

Display Error Message in BW Report based on Customer Exit Variable

Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
    IF i_step = 1.
      <check for condition -- if successful, variable flag = 1, else variable flag = 0>
      IF flag = 0.
        MESSAGE e157(00). "Error Message
      ENDIF.
    ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

Message processing failed if we receive attachments via E-Mail

Dear ladies and gentlemen,
we have follow proccess:
We get some e-mails with an attachment. The E-Mail pick up the messages and send it to an RFC Channel.
I changed the payload via the localejbs/AF_Modules/PayloadSwapBean :
localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean TRANSFORM
and the module configuration looks follow:
TRANSFORM swap.keyName payload-name
TRANSOFRM swap.keyValue MailAttachment-1
it looks good and the payload would be swapped okay, and the mapping is also okay.
But if we push the message to the RFC Adapter I get follow error message back:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
So now my question: If is possible, that the adapter try to send also the Body of this E-Mail to the target system ? Because the
Message ID is the ID from the payload of the E-Mail Body.
It is possible to keep away the E-Mail Body from the payload?
Because we need only the attachment. Or if I I have to setup via Bean anything in the RFC Adapter ?
Thanks
Kind reagards
Stephan Kohler
P.S. The PI System is an PI 7.1, the target system would be an R/3 4.6. I haven't any success with the RFC Adatper version 7.10 or 6.40

> Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
>
Is your attachment an XML? Is this XML structure is same as what you mapping source is? If that is the case, it should be okay. Is this interface working for non-mail sender? You might want to re-import the RFC structure in to PI again.
VJ

R12 Payable - Payment Process Request Report

I need to list payments ordered by vendor name in Payment Process Request Report.
Currently I don't see any logic how payments are printed in "Payment Process Request" report.
Does anyone know how to resort this report?
Thanks,
Joon

Hi,
R12 AP not showing Accounting entry for currency exchange loss account where as same accounting entry is apearing in GL...
### Steps to Reproduce ###
1. Create AP Prepayment and pay full with forign currency (USD) Exchange rate 3.1
2.Create invoice with forign currency(USD) Exchange rate 3.75
3.go to tools/view accounting events
4. run the create accounting and go to GL and check the accounting entry
Please advise
Regards

Error messages while generating reports

I am using CR XI SP4 and i get the following message when generating reports:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt:
Unknown Database Connector Error---- Error code:-2147482942 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException (Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.t.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
In the RAS log file i see:
ErrorLog 2009 7 21 17:45:16.188 732 3648 (\servers\ras\dtsagent\cdtsagent.cpp:3113): CDTSagent::doOneRequest reqId=250: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:13209 ErrorCode:706 ErrorMsg:"Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt: Unknown Database Connector Error"
Any assistance would be appreciated
Thanks

hi,
You are able to login in to application, Means your authentication is working.
Open RPD in online mode and try to view data.
Check your connection pool setting in General tab.
Check you have selected appropriate Data Source Name, Call Interface.
Thanks,
Sainath Baludu.

Getting Err : An error occurred in the message processing program.

Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

closed

XI message processing statistics / reports

Similar Messages

Maybe you are looking for