XI message with Attachment using Http Adapter

Hi ,
We are using XI/PI 7.0 with Sp09 and Sender Application is SRM and Receiver is Ariba MarketPlace.
We are trying to Send PO with Attachments like Word, PDF etc from SRM to Ariba using Https adapter and from SRM we are using ABAP Proxy. When I did the testing with out any special config, I was able to send the attachments (I can see word doc as part of the payload-attachment) to XI from SRM but this attachment is not going through https adapter from XI to Ariba?
I have read some posts on this but I could not find the answer for my situation. One of the solution is that we can use SOAP adapter but we don't want to use Soap for some reasons.
Please give your thoughts.
Thanks in Advance.
-Laxman

> Thanks for your replies, I am little confused, based
> on your references http can't support attachments.
That is true.
> Also sap help link says Http adapter doesn't support
> attachments and XI adapter also doesn't support.
That is not true. XI adapter (in fact we do not talk of an adapter) supports attachments.
> It means Proxy also shouldn't support because proxy is
> nothing but XI adapter.
This is true, ABAP or Java Proxy are like XI adapter. Therefore it supports attachments.
> But When I send PO with attachments from SRM using
> Proxy connection I was able to pass through XI. So
> how proxy was able to send the attachments and this
> is contradicts to the help documentation.
The online help is wrong.
> We don't want to use SOAP because we are already
> using https adapter and this scenario is in
> production also if we go with SOAP then we have to
> re-import the digital certificate in Java Engine for
> SSL. Attachments are the new enhancement only.  
I do not see another solution besides using SOAP adapter in so-called non-SOAP mode. Yes you have to reimport the certificates to J2EE stack.
Regards
Stefan

Similar Messages

  • WSRM Adapter replaced with soap in PO7.4. Getting error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error"

    Hello All,
    We have scenario proxy->pi->webservice. In older versions of PI system they used wsrm adapter at receiver side and it's working fine.
    Receiver interface is asynchronous. So no response structute is present and receiver service is business component(since receiver is a third party).
    During migration, we have replaced the receiver adapter with SOAP adapter and used message protocol as SOAP 1.1 but the message is failing and in communication channel it is showing error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error". In this case the receiver interface is stateless xi 3.0 compatible(re using the old), after changing it to just stateless also issue persists.
    In target url field if i prefix the url with "http" then above mentioned error is occurring otherwise if i use the hostname:port/path.. then it is giving error
    "soap: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: Unsupported protocol". So maintaing the url as http://hostname:port/pat.....
    As in old channel wsrm channel there is no userid and password, i haven't given any userid/pwd in receiver channel.
    used the bean sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean with  parameters
    Module Key  =  soap
      Parameter Name  =  noSOAPMakeSysErrFromResponseFault
    Parameter Value  =  false
    and
    xmbws.No SOAPIgnoreStatus = true
    but not successful.
    Please help me. I got stcuk here.

    Hello Jannus,
    The connectivity is working fine. Network team has confirmed it. I doubt that any strucutre(header) difference might be present in message when sending with wsrm adapter compared to sending with soap adapter.
    Please let me know the exact difference between soap and wsrm functionality in receiving end.
    By considering the structure issue, i have checked the "do not use soap envelope" check box, then i got error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type"
    Then i used message transform bean, but not successful.
    Regards,
    Ch.Venkat.

  • Scheduling of message using HTTP Adapter.

    Hi All,
    The scenario is SAP ECC to SAP PI to SAP MII, and we are using HTTP adapter on the receiver side.
    The requirement is that, the messages should be sent to MII in the order in which ECC sends it to PI.
    Can anyone please help me on how this can be achieved.
    Thanks and Regards,
    NehaSingh

    Hi Neha,
    If it is IDOC to HTTP scenario and you use EOIO also you will face a big problem.
    It will not work. I have faced the same problem.
    Suppose at a same time ECC genaretes 100 IDOC then then in intregration engine it may not reach at same sequecnce as IDOC no.
    You can go with IDOC packageing in this case in ECC.
    In ECC send the IDOCs as packages.
    Also in PI create one Sender IDOC channel with package size.
    then before your actual mappinng create a simple mapping program to sort the IDOC based on IDOC number. Then do the actual mapping.
    Dont forget to create an Unbounded IDOC structure as source side in Mapping,
    Edited by: Debashish on Jul 1, 2011 2:29 PM

  • Using HTTP adapter with no namespaces

    Hi,
    Is there anyway to use HTTP adapter when the provider does not accept the namespaces. The HTTP binding wizard requires a targetnamespace to be defined in the request and response xsds that we have to use.
    Thanks & Regards
    Siva

    Bernd we are trying to do the same thing only with the soap adapter.  I'm convinced that no one really knows how to do it.  We can't even find an SAP CONSULTANT that has done it .. at any cost!
    If you hear anything good .. please let me know - my email is [email protected]
    I think the nightmare is coming in because when SAP bought the j2ee ( application server ) they never really have integrated it so it's very confusing if the settings need to be done on the ABAP side or the J2EE side via visual administrator.  In addition most Basis guys are only experienced in the ABAP side and not the J2EE.

  • Can I get a response back when I use HTTP adapter

    Hi ,
    I am doing a integration between SAP and ThirdParty Product using PI 7.1.
    The scenario is ThirdParty -> PI -> SAP ,using HTTP adapter between ThirdParty and PI , and IDoc adapter between SAP and PI.
    So,its a HTTP sender and IDoc receiver.
    So I was just curious to know if the IDoc posting failed in SAP ,can I send a response from SAP to Thirdparty regarding the failure along with some error message.
    Thanks for your responses.
    Venu

    Hi,
         It may lead to some timeout problems if you design your scenario as synchronous i.e sending response back to HTTP..
    as SAP may take time to process idoc and need to provide response back to PI ..by that time the connection may become invalid and thirdparty may receive response as timeout error...
    As anyway PI has the option of Alert managements..you can trigger the error mail to the third party recipients for letting them the status...
    HTH
    Rajesh

  • How to configure message header in receiver http adapter?

    Hi all
    I need the outgoing message payload from receiver http adapter to backend system with below form.
    POST http://222.222.33.22 /HTTP1.0
    content-type:application/x-www-form-urlencoded
    USERID=xxxxxx&PASSWORD=xxxx&SRCID=10&CDDATE=20070601...........................................................................
    ×POST http://222.222.33.22 /HTTP1.0
    ○content-type:application/x-www-form-urlencoded
    ○USERID=xxxxxx&PASSWORD=xxxx&SRCID=10&CDDATE=20070601...........................................................................
    Is there a parameter to enable POST method as a part of message header outputing?
    thanks in advance.

    The parameters available in HTTP adapter for message header are:
    HeaderFieldFive     http://sap.com/xi/XI/System/HTTP
    HeaderFieldFour     http://sap.com/xi/XI/System/HTTP
    HeaderFieldOne     http://sap.com/xi/XI/System/HTTP
    HeaderFieldSix     http://sap.com/xi/XI/System/HTTP
    HeaderFieldThree     http://sap.com/xi/XI/System/HTTP
    HeaderFieldTwo     http://sap.com/xi/XI/System/HTTP
    HTTPDest     http://sap.com/xi/XI/System/HTTP
    TargetURL     http://sap.com/xi/XI/System/HTTP
    URLParamFive     http://sap.com/xi/XI/System/HTTP
    URLParamFour     http://sap.com/xi/XI/System/HTTP
    URLParamOne     http://sap.com/xi/XI/System/HTTP
    URLParamSix     http://sap.com/xi/XI/System/HTTP
    URLParamThree     http://sap.com/xi/XI/System/HTTP
    URLParamTwo     http://sap.com/xi/XI/System/HTTP

  • Integration with Peoplesoft using OA adapter

    Hi
    I am not experiened on integrating/consuming Peoplesoft functionality from external system/application/BPEL/OSB.
    What i understood after reading few messages that Peoplesoft Intergration Broker can be used to expose Peoplesoft component interface as services which can be consumed/invoked by any system/application/BPEL/OSB.
    But i have requirement from our client that he wants to replace Peoplesoft Intergration Broker with oracle fusion middleware stack. In that context, i think only solution would be using Oracle Application adapter for Peoplesoft to expose Peoplesoft component interface as service, and which can be later consume in OSB/BPEL.
    Please suggest.

    Hi,
    There is a series of blogs that address this same area. Please look into them. they should surely help,
    /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i - Part I
    /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii - Part II
    /people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii - Part III
    Regards
    Bhavesh

  • Is it possible to use HTTP adapter?

    Hi All,
    interface will be trigged by ECC to run once a day. The purpose of this interface is to update ECC exchange rates with the exchange rates file provided by the Central Bank of Brazil.
    The file is available in the web site: http://www. XXXX and  its name changes depending on the date.
    The format is YYYYMMDD.csv. Example: 20100419.csv
    The scenario will be Abap proxy <-> PI <-> website (Http / soapu2026 whatever) (Syncronous as the date must be sent to build the correct filename).
    My main question is: how can I pick up this csv file from the website? Is it possible to use HTTP adapter?
    Thanks,
    Satya Kumar

    Hi ,
    i am not sure about this,i wolukd prefer developing JAVA Proxy or File Adapter . try this code it read the data from website, try in you stand alone application,it is able to read or not.
    you will face two problems,you have to convert CSC file to XML it is not possible in HTTP Adapter,
    import java.lang.*;
    import java.util.*;
    import java.net.*;
    import java.io.*;
    class URL2AC
            public static void main(String args[]) {
           try {        
              URL url = new URL("http://www.XXXXXXX.com/raj.txt");
              URLConnection uc = url.openConnection();
              BufferedReader in = new BufferedReader(new InputStreamReader(uc.getInputStream()));
              while (in.readLine()!=null)
                   System.out.println(in.readLine());
           catch(Exception e) {
              e.printStackTrace();
    Regards,
    Raj

  • 3rd party to sap using HTTP adapter

    Hi Folks,
        I'm sending some IDOC to sap from the 3rd party. I have to use HTTP adapter as sender and IDOC as receiver adapter.
    Can you please suggest me how to configure teh sender side. As I know there will be no such configuration for the sender adapter as it is HTTP then how the HTTP adapter will get the data sent by the 3rd party and how it will pass it on to the idoc adapter ?
    Regards....

    If you like to have more details about the http url
    then refer the below link
    http://help.sap.com/saphelp_nw70/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
    Rajesh

  • How to Integrate XI with Peoplesoft using iWay Adapter

    hi Friends,
            This is Sreeni. I want to use iWay adapter for integrate Peoplesoft with XI.
    can you please help me in this way.

    Hi,
    There is a series of blogs that address this same area. Please look into them. they should surely help,
    /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i - Part I
    /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii - Part II
    /people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii - Part III
    Regards
    Bhavesh

  • Flex with Hibernate using HTTP

    Hi All,
    am new to Flex. Can any one post a simple code on Flex with
    Hibernate using HTTP , i mean connecting to database using
    Hibernate and invoking the hibernate by using the HTTP service.
    can we have a sequence like
    Flex(MXML)->JSP->Hibernate->Database .Is it possible?
    Thanks in Advance

    > can we have a sequence like
    Flex(MXML)->JSP->Hibernate->Database .Is it possible?
    That's exactly what you're going to have and it certainly is
    possible. (Replace the JSP with Servlet, Struts Action, JSF or
    whatever)
    Usually you'll send data back -- output to JSP or write to
    HttpServletResponse object -- in XML or JSON format. The data would
    be delivered to the result event of the HTTService in Flex. If it
    fails for some reason, the fault event of HTTService class would be
    invoked.
    The important thing to realize about Flex is that it cannot
    directly connect to a DB; you need a server side action that would
    get data from wherever write it to response. It's more like Ajax
    calls to a JSP/Servlet.
    ATTA

  • Any sample for Message with Attachment  for OC4J-10.1.3?

    Does any one know where I can find sample for Message with Attachment for oc4j 10.1.3. ORacle web service site how-to pages has no any sample for this. I saw this a new chapter is added to Oracle Web Service USer Guide, but no sample to test.
    Thanks
    TZhang

    Does any one know where I can find sample for Message with Attachment for oc4j 10.1.3. ORacle web service site how-to pages has no any sample for this. I saw this a new chapter is added to Oracle Web Service USer Guide, but no sample to test.
    Thanks
    TZhang

  • Req/Reply message using HTTP adapter

    I am using a HTTP Adapter to receive a request message from a client application and sending a response back to the client. The response is being sent by the adapter is XML with a HTML wrapper. However, the client application can't accept HTML; we have to send pure XML.
    Is there any easy way to change this in adapter.ini? Can we do something using ReceiverCustomizer? or we have to do something in the TransportServlet?
    -----------------------------------------Current Response message-------------------------
    <html><head><title>TransportServlet </title></head>
    <body><h1>TransportServlet</h1>
    <?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
    <ns1:response userId=""
    xmlns:ns1="http://quikpayasp.com/namespace/activity">
    <account type="StanfordCardPlan">
    <currentBalance></currentBalance>
    <accountActivityDate></accountActivityDate>
    </account>
    </ns1:response>
    </body></html>
    --------------------Expected----------------------------------------------
    <?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
    <ns1:response userId=""
    xmlns:ns1="http://quikpayasp.com/namespace/activity">
    <account type="StanfordCardPlan">
    <currentBalance></currentBalance>
    <accountActivityDate></accountActivityDate>
    </account>
    </ns1:response>
    Appreciate your response.

    Try using D3L mode.
    babu

  • HOW TO SEND A HEBREW EMAIL WITH ATTACHMENT USING DEMO_MAIL

    Hello All,
    This is Not a question , just attaching something I've implemented and might be interesting for few of us,
    This package I'm attaching allows to send Hebrew Language email + attaching files to it.
    This package is based on demo_mail package (combined here but you can search at google for more example information if needed).
    My Package is supplied as is , for any specific information regarding it , please contact me directly at : [email protected] or POST here.
    * Please also note , that this package allow file to be attach via URL (meaning you will have to define a link to this file, if you would like to implement a link to a local file , e.g : c:\temp\myfile , you will have to customize the package your self with database directories option etc ...)
    First I will attach an example of how to use it :
    ==================================
    begin
    demo_mail_heb.send_html_mail_attach(p_sender => '[email protected]',
    p_recipients => '[email protected]',
    p_subject => 'שלום וברכה עולם',
    p_data => '<hr><b>בוקר טוב</b><hr>',
    p_file_name => 'but_choose_file.gif',
    p_file_mime_type => 'application/pdf',
    p_file_URL => 'http://10.172.246.160:7777/i/but_choose_file.gif');
    end;
    Second Here is the Package (please note you will have to modify few settings in order to enable it , such as mail server address ..etc)
    ======================================================================================
    CREATE OR REPLACE PACKAGE demo_mail_heb IS
    ----------------------- Customizable Section -----------------------
    -- Customize the SMTP host, port and your domain name below.
    smtp_host VARCHAR2(256) := 'mail.oracle.com';
    smtp_port PLS_INTEGER := 25;
    smtp_domain VARCHAR2(256) := 'oracle.com';
    -- Customize the signature that will appear in the email's MIME header.
    -- Useful for versioning.
    MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
    --------------------- End Customizable Section ---------------------
    -- A unique string that demarcates boundaries of parts in a multi-part email
    -- The string should not appear inside the body of any part of the email.
    -- Customize this if needed or generate this randomly dynamically.
    BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
    FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
    LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
    utl_tcp.CRLF;
    -- A MIME type that denotes multi-part email (MIME) messages.
    MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
    BOUNDARY || '"';
    MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
    -- Sent clear Html Email
    procedure send_html_mail (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default null,
    p_mime_type in varchar2 default 'text/html; charset=windows-1255');
    -- Sent Html Email with Attachment
    procedure send_html_mail_attach (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
    p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
    p_file_name in varchar2 default 'but_choose_file.gif',
    p_file_mime_type in varchar2 default 'application/pdf',
    p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
    -- A simple email API for sending email in plain text in a single call.
    -- The format of an email address is one of these:
    -- someone@some-domain
    -- "Someone at some domain" <someone@some-domain>
    -- Someone at some domain <someone@some-domain>
    -- The recipients is a list of email addresses separated by
    -- either a "," or a ";"
    PROCEDURE mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              message IN VARCHAR2);
    -- Extended email API to send email in HTML or plain text with no size limit.
    -- First, begin the email by begin_mail(). Then, call write_text() repeatedly
    -- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
    -- email in non-ASCII or multi-byte character set. End the email with
    -- end_mail().
    FUNCTION begin_mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
              priority IN PLS_INTEGER DEFAULT NULL)
              RETURN utl_smtp.connection;
    -- Write email body in ASCII
    PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
              message IN VARCHAR2);
    -- Write email body in non-ASCII (including multi-byte). The email body
    -- will be sent in the database character set.
    PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
                   message IN VARCHAR2);
    -- Write email body in binary
    PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
              message IN RAW);
    -- APIs to send email with attachments. Attachments are sent by sending
    -- emails in "multipart/mixed" MIME format. Specify that MIME format when
    -- beginning an email with begin_mail().
    -- Send a single text attachment.
    PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN VARCHAR2,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
              last IN BOOLEAN DEFAULT FALSE);
    -- Send a binary attachment. The attachment will be encoded in Base-64
    -- encoding format.
    PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN RAW,
                   mime_type IN VARCHAR2 DEFAULT 'application/octet',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   last IN BOOLEAN DEFAULT FALSE);
    -- Send an attachment with no size limit. First, begin the attachment
    -- with begin_attachment(). Then, call write_text repeatedly to send
    -- the attachment piece-by-piece. If the attachment is text-based but
    -- in non-ASCII or multi-byte character set, use write_mb_text() instead.
    -- To send binary attachment, the binary content should first be
    -- encoded in Base-64 encoding format using the demo package for 8i,
    -- or the native one in 9i. End the attachment with end_attachment.
    PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   transfer_enc IN VARCHAR2 DEFAULT NULL);
    -- End the attachment.
    PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE);
    -- End the email.
    PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
    -- Extended email API to send multiple emails in a session for better
    -- performance. First, begin an email session with begin_session.
    -- Then, begin each email with a session by calling begin_mail_in_session
    -- instead of begin_mail. End the email with end_mail_in_session instead
    -- of end_mail. End the email session by end_session.
    FUNCTION begin_session RETURN utl_smtp.connection;
    -- Begin an email in a session.
    PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                        sender IN VARCHAR2,
                        recipients IN VARCHAR2,
                        subject IN VARCHAR2,
    --                     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
                        priority IN PLS_INTEGER DEFAULT NULL);
    -- End an email in a session.
    PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
    -- End an email session.
    PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
    END;
    CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
    -- Sent clear Html Email
    procedure send_html_mail (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default null,
    p_mime_type in varchar2 default 'text/html; charset=windows-1255')
    Is
    conn utl_smtp.connection;
    BEGIN
    conn := demo_mail_heb.begin_mail(
    sender => p_sender,
    recipients => p_recipients,
    subject => p_subject,
    mime_type => p_mime_type);
    demo_mail_heb.write_text(
    conn => conn,
    message => p_data);
    demo_mail_heb.end_mail( conn => conn );
    END;
    -- Sent Html Email with Attachment
    procedure send_html_mail_attach (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
    p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
    p_file_name in varchar2 default 'but_choose_file.gif',
    p_file_mime_type in varchar2 default 'application/pdf',
    p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
    is
    conn utl_smtp.connection;
    req utl_http.req;
    resp utl_http.resp;
    data RAW(200);
    begin
    conn := demo_mail_heb.begin_mail(
    sender => p_sender,
    recipients => p_recipients,
    subject => p_subject,
    mime_type => p_mime_type);
    demo_mail_heb.attach_text(
    conn => conn,
    data => p_data,
    mime_type => 'text/html');
    demo_mail_heb.begin_attachment(
    conn => conn,
    mime_type => p_file_mime_type,
    inline => TRUE,
    filename => p_file_name,
    transfer_enc => 'base64');
    -- In writing Base-64 encoded text following the MIME format below,
    -- the MIME format requires that a long piece of data must be splitted
    -- into multiple lines and each line of encoded data cannot exceed
    -- 80 characters, including the new-line characters. Also, when
    -- splitting the original data into pieces, the length of each chunk
    -- of data before encoding must be a multiple of 3, except for the
    -- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
    -- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
    -- of data before encoding.
    Utl_Http.set_proxy('www-proxy.us.oracle.com', 'oracle.com');
    req := utl_http.begin_request(p_file_URL);
    resp := utl_http.get_response(req);
    BEGIN
    LOOP
    utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
    demo_mail_heb.write_raw(
    conn => conn,
    message => utl_encode.base64_encode(data));
    END LOOP;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
    utl_http.end_response(resp);
    END;
    demo_mail_heb.end_attachment( conn => conn );
    demo_mail_heb.end_mail( conn => conn );
    end;
    -- Return the next email address in the list of email addresses, separated
    -- by either a "," or a ";". The format of mailbox may be in one of these:
    -- someone@some-domain
    -- "Someone at some domain" <someone@some-domain>
    -- Someone at some domain <someone@some-domain>
    FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
    addr VARCHAR2(256);
    i pls_integer;
    FUNCTION lookup_unquoted_char(str IN VARCHAR2,
                        chrs IN VARCHAR2) RETURN pls_integer AS
    c VARCHAR2(5);
    i pls_integer;
    len pls_integer;
    inside_quote BOOLEAN;
    BEGIN
    inside_quote := false;
    i := 1;
    len := length(str);
    WHILE (i <= len) LOOP
         c := substr(str, i, 1);
         IF (inside_quote) THEN
         IF (c = '"') THEN
         inside_quote := false;
         ELSIF (c = '\') THEN
         i := i + 1; -- Skip the quote character
         END IF;
         GOTO next_char;
         END IF;
         IF (c = '"') THEN
         inside_quote := true;
         GOTO next_char;
         END IF;
         IF (instr(chrs, c) >= 1) THEN
         RETURN i;
         END IF;
         <<next_char>>
         i := i + 1;
    END LOOP;
    RETURN 0;
    END;
    BEGIN
    addr_list := ltrim(addr_list);
    i := lookup_unquoted_char(addr_list, ',;');
    IF (i >= 1) THEN
    addr := substr(addr_list, 1, i - 1);
    addr_list := substr(addr_list, i + 1);
    ELSE
    addr := addr_list;
    addr_list := '';
    END IF;
    i := lookup_unquoted_char(addr, '<');
    IF (i >= 1) THEN
    addr := substr(addr, i + 1);
    i := instr(addr, '>');
    IF (i >= 1) THEN
         addr := substr(addr, 1, i - 1);
    END IF;
    END IF;
    RETURN addr;
    END;
    -- Write a MIME header
    PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
                   name IN VARCHAR2,
                   value IN VARCHAR2) IS
    BEGIN
    -- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
    utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
    END;
    -- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
    PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE) AS
    BEGIN
    IF (last) THEN
    utl_smtp.write_data(conn, LAST_BOUNDARY);
    ELSE
    utl_smtp.write_data(conn, FIRST_BOUNDARY);
    END IF;
    END;
    PROCEDURE mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              message IN VARCHAR2) IS
    conn utl_smtp.connection;
    BEGIN
    conn := begin_mail(sender, recipients, subject);
    write_text(conn, message);
    end_mail(conn);
    END;
    FUNCTION begin_mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
              priority IN PLS_INTEGER DEFAULT NULL)
              RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
    BEGIN
    conn := begin_session;
    begin_mail_in_session(conn, sender, recipients, subject, mime_type,
    priority);
    RETURN conn;
    END;
    PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
              message IN VARCHAR2) IS
    BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
    END;
    PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
                   message IN VARCHAR2) IS
    BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
    END;
    PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
              message IN RAW) IS
    BEGIN
    utl_smtp.write_raw_data(conn, message);
    END;
    PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN VARCHAR2,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
              last IN BOOLEAN DEFAULT FALSE) IS
    BEGIN
    begin_attachment(conn, mime_type, inline, filename);
    write_text(conn, data);
    end_attachment(conn, last);
    END;
    PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN RAW,
                   mime_type IN VARCHAR2 DEFAULT 'application/octet',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   last IN BOOLEAN DEFAULT FALSE) IS
    i PLS_INTEGER;
    len PLS_INTEGER;
    BEGIN
    begin_attachment(conn, mime_type, inline, filename, 'base64');
    -- Split the Base64-encoded attachment into multiple lines
    i := 1;
    len := utl_raw.length(data);
    WHILE (i < len) LOOP
    IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
         utl_smtp.write_raw_data(conn,
         utl_encode.base64_encode(utl_raw.substr(data, i,
         MAX_BASE64_LINE_WIDTH)));
    ELSE
         utl_smtp.write_raw_data(conn,
         utl_encode.base64_encode(utl_raw.substr(data, i)));
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    i := i + MAX_BASE64_LINE_WIDTH;
    END LOOP;
    end_attachment(conn, last);
    END;
    PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   transfer_enc IN VARCHAR2 DEFAULT NULL) IS
    BEGIN
    write_boundary(conn);
    write_mime_header(conn, 'Content-Type', mime_type);
    IF (filename IS NOT NULL) THEN
    IF (inline) THEN
         write_mime_header(conn, 'Content-Disposition',
         'inline; filename="'||filename||'"');
    ELSE
         write_mime_header(conn, 'Content-Disposition',
         'attachment; filename="'||filename||'"');
    END IF;
    END IF;
    IF (transfer_enc IS NOT NULL) THEN
    write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    END;
    PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE) IS
    BEGIN
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (last) THEN
    write_boundary(conn, last);
    END IF;
    END;
    PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    end_mail_in_session(conn);
    end_session(conn);
    END;
    FUNCTION begin_session RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
    BEGIN
    -- open SMTP connection
    conn := utl_smtp.open_connection(smtp_host, smtp_port);
    utl_smtp.helo(conn, smtp_domain);
    RETURN conn;
    END;
    PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                        sender IN VARCHAR2,
                        recipients IN VARCHAR2,
                        subject IN VARCHAR2,
                        mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   --     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
                        priority IN PLS_INTEGER DEFAULT NULL) IS
    my_recipients VARCHAR2(32767) := recipients;
    my_sender VARCHAR2(32767) := sender;
    BEGIN
    -- Specify sender's address (our server allows bogus address
    -- as long as it is a full email address ([email protected]).
    utl_smtp.mail(conn, get_address(my_sender));
    -- Specify recipient(s) of the email.
    WHILE (my_recipients IS NOT NULL) LOOP
    utl_smtp.rcpt(conn, get_address(my_recipients));
    END LOOP;
    -- Start body of email
    utl_smtp.open_data(conn);
    -- Set "From" MIME header
    write_mime_header(conn, 'From', sender);
    -- Set "To" MIME header
    write_mime_header(conn, 'To', recipients);
    -- Set "Subject" MIME header
    write_mime_header(conn, 'Subject', subject);
    -- Set "Content-Type" MIME header
    write_mime_header(conn, 'Content-Type', mime_type);
    -- Set "X-Mailer" MIME header
    write_mime_header(conn, 'X-Mailer', MAILER_ID);
    -- Set priority:
    -- High Normal Low
    -- 1 2 3 4 5
    IF (priority IS NOT NULL) THEN
    write_mime_header(conn, 'X-Priority', priority);
    END IF;
    -- Send an empty line to denotes end of MIME headers and
    -- beginning of message body.
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (mime_type LIKE 'multipart/mixed%') THEN
    write_text(conn, 'This is a multi-part message in MIME format.' ||
         utl_tcp.crlf);
    END IF;
    END;
    PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    utl_smtp.close_data(conn);
    END;
    PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    utl_smtp.quit(conn);
    END;
    END;

    Hello All,
    Small modification - use this package and not the above
    HERE IS A WORKING CODE FOR SENDING HEBREW MESSAGES (INCLUDING SUBJECT IN UTF-8 APPEAR IN ALL EMAIL CLIENTS I HAVE CHECKED) + ATTACHMENTS
    Code attached below is supplied as is with no support. anyhow if help is needed , please contact me via [email protected]
    ============================================================================
    CREATE OR REPLACE PACKAGE demo_mail_heb IS
    ----------------------- Customizable Section -----------------------
    -- Customize the SMTP host, port and your domain name below.
    smtp_host VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_HOST');
    smtp_port PLS_INTEGER := pst_ajax.getParameter('EMAIL_SMTP_PORT');
    smtp_domain VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_DOMAIN');
    -- Customize the signature that will appear in the email's MIME header.
    -- Useful for versioning.
    MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
    --------------------- End Customizable Section ---------------------
    -- A unique string that demarcates boundaries of parts in a multi-part email
    -- The string should not appear inside the body of any part of the email.
    -- Customize this if needed or generate this randomly dynamically.
    BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
    FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
    LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
    utl_tcp.CRLF;
    -- A MIME type that denotes multi-part email (MIME) messages.
    MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
    BOUNDARY || '"';
    MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
    -- Sent clear Html Email
    procedure send_html_mail (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default null,
    p_mime_type in varchar2 default 'text/html; charset=windows-1255');
    -- Sent Html Email with Attachment
    procedure send_html_mail_attach (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
    p_mime_type in varchar2 default 'text/html; charset=windows-1255',
    p_file_name in varchar2 default 'but_choose_file.gif',
    p_file_mime_type in varchar2 default 'application/pdf',
    p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
    -- A simple email API for sending email in plain text in a single call.
    -- The format of an email address is one of these:
    -- someone@some-domain
    -- "Someone at some domain" <someone@some-domain>
    -- Someone at some domain <someone@some-domain>
    -- The recipients is a list of email addresses separated by
    -- either a "," or a ";"
    PROCEDURE mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              message IN VARCHAR2);
    -- Extended email API to send email in HTML or plain text with no size limit.
    -- First, begin the email by begin_mail(). Then, call write_text() repeatedly
    -- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
    -- email in non-ASCII or multi-byte character set. End the email with
    -- end_mail().
    FUNCTION begin_mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
              priority IN PLS_INTEGER DEFAULT NULL)
              RETURN utl_smtp.connection;
    -- Write email body in ASCII
    PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
              message IN VARCHAR2);
    -- Write email body in non-ASCII (including multi-byte). The email body
    -- will be sent in the database character set.
    PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
                   message IN VARCHAR2);
    -- Write email body in binary
    PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
              message IN RAW);
    -- APIs to send email with attachments. Attachments are sent by sending
    -- emails in "multipart/mixed" MIME format. Specify that MIME format when
    -- beginning an email with begin_mail().
    -- Send a single text attachment.
    PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN VARCHAR2,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
              last IN BOOLEAN DEFAULT FALSE);
    -- Send a binary attachment. The attachment will be encoded in Base-64
    -- encoding format.
    PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN RAW,
                   mime_type IN VARCHAR2 DEFAULT 'application/octet',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   last IN BOOLEAN DEFAULT FALSE);
    -- Send an attachment with no size limit. First, begin the attachment
    -- with begin_attachment(). Then, call write_text repeatedly to send
    -- the attachment piece-by-piece. If the attachment is text-based but
    -- in non-ASCII or multi-byte character set, use write_mb_text() instead.
    -- To send binary attachment, the binary content should first be
    -- encoded in Base-64 encoding format using the demo package for 8i,
    -- or the native one in 9i. End the attachment with end_attachment.
    PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   transfer_enc IN VARCHAR2 DEFAULT NULL);
    -- End the attachment.
    PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE);
    -- End the email.
    PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
    -- Extended email API to send multiple emails in a session for better
    -- performance. First, begin an email session with begin_session.
    -- Then, begin each email with a session by calling begin_mail_in_session
    -- instead of begin_mail. End the email with end_mail_in_session instead
    -- of end_mail. End the email session by end_session.
    FUNCTION begin_session RETURN utl_smtp.connection;
    -- Handling the Email Subject Line
    function mimeheader_encode(
    p_str varchar2
    , p_charset varchar2 := 'UTF-8') return varchar2;
    -- Begin an email in a session.
    PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                        sender IN VARCHAR2,
                        recipients IN VARCHAR2,
                        subject IN VARCHAR2,
    --                     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
                        priority IN PLS_INTEGER DEFAULT NULL);
    -- End an email in a session.
    PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
    -- End an email session.
    PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
    END;
    CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
    -- Sent clear Html Email
    procedure send_html_mail (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default null,
    p_mime_type in varchar2 default 'text/html; charset=windows-1255')
    Is
    conn utl_smtp.connection;
    BEGIN
    conn := demo_mail_heb.begin_mail(
    sender => p_sender,
    recipients => p_recipients,
    subject => p_subject,
    mime_type => 'text/html; charset=UTF-8');--p_mime_type);
    demo_mail_heb.write_text(
    conn => conn,
    message => p_data);
    demo_mail_heb.end_mail( conn => conn );
    END;
    -- Sent Html Email with Attachment
    procedure send_html_mail_attach (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
    p_mime_type in varchar2 default 'text/html; charset=windows-1255',
    p_file_name in varchar2 default 'but_choose_file.gif',
    p_file_mime_type in varchar2 default 'application/pdf',
    p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
    is
    conn utl_smtp.connection;
    req utl_http.req;
    resp utl_http.resp;
    data RAW(200);
    v_mime_type varchar2(32767):=demo_mail.MULTIPART_MIME_TYPE;
    begin
    conn := demo_mail_heb.begin_mail(
    sender => p_sender,
    recipients => p_recipients,
    subject => p_subject,
    mime_type => v_mime_type);
    demo_mail_heb.attach_text(
    conn => conn,
    data => p_data,
    mime_type => 'text/html');
    demo_mail_heb.begin_attachment(
    conn => conn,
    mime_type => p_file_mime_type,
    inline => TRUE,
    filename => p_file_name,
    transfer_enc => 'base64');
    -- In writing Base-64 encoded text following the MIME format below,
    -- the MIME format requires that a long piece of data must be splitted
    -- into multiple lines and each line of encoded data cannot exceed
    -- 80 characters, including the new-line characters. Also, when
    -- splitting the original data into pieces, the length of each chunk
    -- of data before encoding must be a multiple of 3, except for the
    -- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
    -- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
    -- of data before encoding.
    req := utl_http.begin_request(p_file_URL);
    resp := utl_http.get_response(req);
    BEGIN
    LOOP
    utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
    demo_mail_heb.write_raw(
    conn => conn,
    message => utl_encode.base64_encode(data));
    END LOOP;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
    utl_http.end_response(resp);
    END;
    demo_mail_heb.end_attachment( conn => conn );
    demo_mail_heb.end_mail( conn => conn );
    end;
    -- Return the next email address in the list of email addresses, separated
    -- by either a "," or a ";". The format of mailbox may be in one of these:
    -- someone@some-domain
    -- "Someone at some domain" <someone@some-domain>
    -- Someone at some domain <someone@some-domain>
    FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
    addr VARCHAR2(256);
    i pls_integer;
    FUNCTION lookup_unquoted_char(str IN VARCHAR2,
    chrs IN VARCHAR2) RETURN pls_integer AS
    c VARCHAR2(5);
    i pls_integer;
    len pls_integer;
    inside_quote BOOLEAN;
    BEGIN
    inside_quote := false;
    i := 1;
    len := length(str);
    WHILE (i <= len) LOOP
    c := substr(str, i, 1);
    IF (inside_quote) THEN
    IF (c = '"') THEN
    inside_quote := false;
    ELSIF (c = '\') THEN
    i := i + 1; -- Skip the quote character
    END IF;
    GOTO next_char;
    END IF;
    IF (c = '"') THEN
    inside_quote := true;
    GOTO next_char;
    END IF;
    IF (instr(chrs, c) >= 1) THEN
    RETURN i;
    END IF;
    <<next_char>>
    i := i + 1;
    END LOOP;
    RETURN 0;
    END;
    BEGIN
    addr_list := ltrim(addr_list);
    i := lookup_unquoted_char(addr_list, ',;');
    IF (i >= 1) THEN
    addr := substr(addr_list, 1, i - 1);
    addr_list := substr(addr_list, i + 1);
    ELSE
    addr := addr_list;
    addr_list := '';
    END IF;
    i := lookup_unquoted_char(addr, '<');
    IF (i >= 1) THEN
    addr := substr(addr, i + 1);
    i := instr(addr, '>');
    IF (i >= 1) THEN
    addr := substr(addr, 1, i - 1);
    END IF;
    END IF;
    RETURN addr;
    END;
    -- Write a MIME header
    PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
    name IN VARCHAR2,
    value IN VARCHAR2) IS
    BEGIN
    -- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
    utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
    END;
    -- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
    PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
    last IN BOOLEAN DEFAULT FALSE) AS
    BEGIN
    IF (last) THEN
    utl_smtp.write_data(conn, LAST_BOUNDARY);
    ELSE
    utl_smtp.write_data(conn, FIRST_BOUNDARY);
    END IF;
    END;
    PROCEDURE mail(sender IN VARCHAR2,
    recipients IN VARCHAR2,
    subject IN VARCHAR2,
    message IN VARCHAR2) IS
    conn utl_smtp.connection;
    BEGIN
    conn := begin_mail(sender, recipients, subject);
    write_text(conn, message);
    end_mail(conn);
    END;
    FUNCTION begin_mail(sender IN VARCHAR2,
    recipients IN VARCHAR2,
    subject IN VARCHAR2,
    mime_type IN VARCHAR2 DEFAULT 'text/plain',
    priority IN PLS_INTEGER DEFAULT NULL)
    RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
    BEGIN
    conn := begin_session;
    begin_mail_in_session(conn, sender, recipients, subject, mime_type,
    priority);
    RETURN conn;
    END;
    PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
    message IN VARCHAR2) IS
    BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
    -- utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
    END;
    PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
    message IN VARCHAR2) IS
    BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
    END;
    PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
    message IN RAW) IS
    BEGIN
    utl_smtp.write_raw_data(conn, message);
    END;
    PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
    data IN VARCHAR2,
    mime_type IN VARCHAR2 DEFAULT 'text/plain',
    inline IN BOOLEAN DEFAULT TRUE,
    filename IN VARCHAR2 DEFAULT NULL,
    last IN BOOLEAN DEFAULT FALSE) IS
    BEGIN
    begin_attachment(conn, mime_type, inline, filename);
    write_text(conn, data);
    end_attachment(conn, last);
    END;
    PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
    data IN RAW,
    mime_type IN VARCHAR2 DEFAULT 'application/octet',
    inline IN BOOLEAN DEFAULT TRUE,
    filename IN VARCHAR2 DEFAULT NULL,
    last IN BOOLEAN DEFAULT FALSE) IS
    i PLS_INTEGER;
    len PLS_INTEGER;
    BEGIN
    begin_attachment(conn, mime_type, inline, filename, 'base64');
    -- Split the Base64-encoded attachment into multiple lines
    i := 1;
    len := utl_raw.length(data);
    WHILE (i < len) LOOP
    IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
    utl_smtp.write_raw_data(conn,
    utl_encode.base64_encode(utl_raw.substr(data, i,
    MAX_BASE64_LINE_WIDTH)));
    ELSE
    utl_smtp.write_raw_data(conn,
    utl_encode.base64_encode(utl_raw.substr(data, i)));
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    i := i + MAX_BASE64_LINE_WIDTH;
    END LOOP;
    end_attachment(conn, last);
    END;
    PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
    mime_type IN VARCHAR2 DEFAULT 'text/plain',
    inline IN BOOLEAN DEFAULT TRUE,
    filename IN VARCHAR2 DEFAULT NULL,
    transfer_enc IN VARCHAR2 DEFAULT NULL) IS
    BEGIN
    write_boundary(conn);
    write_mime_header(conn, 'Content-Type', mime_type);
    IF (filename IS NOT NULL) THEN
    IF (inline) THEN
    write_mime_header(conn, 'Content-Disposition',
    'inline; filename="'||filename||'"');
    ELSE
    write_mime_header(conn, 'Content-Disposition',
    'attachment; filename="'||filename||'"');
    END IF;
    END IF;
    IF (transfer_enc IS NOT NULL) THEN
    write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    END;
    PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
    last IN BOOLEAN DEFAULT FALSE) IS
    BEGIN
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (last) THEN
    write_boundary(conn, last);
    END IF;
    END;
    PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    end_mail_in_session(conn);
    end_session(conn);
    END;
    FUNCTION begin_session RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
    BEGIN
    -- open SMTP connection
    conn := utl_smtp.open_connection(smtp_host, smtp_port);
    utl_smtp.helo(conn, smtp_domain);
    RETURN conn;
    END;
    -- Handling the Email Subject Line
    function mimeheader_encode(
    p_str varchar2
    , p_charset varchar2 := 'UTF-8') return varchar2 is
    l_str varchar2(2000);
    begin
    l_str:=utl_raw.cast_to_varchar2(utl_encode.quoted_printable_encode(utl_raw.cast_to_raw(p_str)));
    l_str:=replace(l_str,'='||chr(13)||chr(10),''); --unfold the data
    l_str:=replace(l_str,'?','=3f'); --quote question marks
    l_str:=replace(l_str,' ','=20'); --quote spaces
    l_str:='=?'||p_charset||'?Q?'||l_str||'?='; -- add prefix and suffix
    return l_str;
    end;
    PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
    sender IN VARCHAR2,
    recipients IN VARCHAR2,
    subject IN VARCHAR2,
    mime_type IN VARCHAR2 DEFAULT 'text/plain',
    -- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
    priority IN PLS_INTEGER DEFAULT NULL) IS
    my_recipients VARCHAR2(32767) := recipients;
    my_sender VARCHAR2(32767) := sender;
    BEGIN
    -- Specify sender's address (our server allows bogus address
    -- as long as it is a full email address ([email protected]).
    utl_smtp.mail(conn, get_address(my_sender));
    -- Specify recipient(s) of the email.
    WHILE (my_recipients IS NOT NULL) LOOP
    utl_smtp.rcpt(conn, get_address(my_recipients));
    END LOOP;
    -- Start body of email
    utl_smtp.open_data(conn);
    -- Set "From" MIME header
    write_mime_header(conn, 'From', sender);
    -- Set "To" MIME header
    write_mime_header(conn, 'To', recipients);
    -- Set "Content-Type" MIME header
    write_mime_header(conn, 'Content-Type', mime_type);
    -- write_mime_header(conn, 'Content-Type', 'text/html; charset=UTF-8');
    -- Set "Subject" MIME header
    -- write_mime_header(conn, 'Subject', subject);
    -- write_mime_header(conn, 'Subject', CONVERT(subject,'IW8ISO8859P8'));
    write_mime_header(conn, 'Subject',mimeheader_encode(p_str => subject,p_charset => 'UTF-8'));
    -- write_mime_header(conn, 'Subject',CONVERT(subject,'IW8MSWIN1255'));
    -- Set "X-Mailer" MIME header
    write_mime_header(conn, 'X-Mailer', MAILER_ID);
    -- Set priority:
    -- High Normal Low
    -- 1 2 3 4 5
    IF (priority IS NOT NULL) THEN
    write_mime_header(conn, 'X-Priority', priority);
    END IF;
    -- Send an empty line to denotes end of MIME headers and
    -- beginning of message body.
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (mime_type LIKE 'multipart/mixed%') THEN
    write_text(conn, 'This is a multi-part message in MIME format.' ||
    utl_tcp.crlf);
    END IF;
    END;
    PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    utl_smtp.close_data(conn);
    END;
    PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    utl_smtp.quit(conn);
    END;
    END;

  • How to send SOAP message with attachment?

    Hi Experts,
    How do I simulate to send a SOAP message with an attachment? Can I use XMLSpy?
    Please help.
    Thanks,
    Shobhit

    Ravi,
    With the generic SOAP client, it asks for the http based wsdl file location. But my wsdl has been generated by XI and I have the file stored on my desktop.
    Something to do with the path http://zpidd01:8030/XISOAPAdapter/MessageServlet?channel=NetworkPartners:NP_Order_BS:NP_SOAP_Sender_CC ??
    Stefan,
    my scenario is to send a SOAP request with attachment and post the attachment in ECC through the ABAP server proxy.
    WebService Client -
    SOAP----> XI -
    ABAP PROXY CALL ---> ECC
    Need further assistance from both of you how to achieve this scenario.
    Thanks,
    Shobhit
    Edited by: Shobhit Swarup Mathur on Jul 24, 2008 4:34 AM

Maybe you are looking for

  • Help! Captive Runtime application folder disappears after publishing.

    I'm using windows 7 and flash cs6. I've successfully created Applications with runtime embedded before, but now with the same source files when I publish it takes ages (as normal), but when it finishes the temp files that were being created dissappea

  • Incompatible types in case statement

    I'm getting incompatible types inside this case statement : inString = s_in.readUTF();             switch (inString.substring(1,3))                 case nam:                     ChatClient.nameArea.append(inString);                     break;        

  • ALV Display on the Custom Control

    Hi Friends, Iam developing a Module Pool program where I call a ALV grid on a custom control. I have only one screen in which i have a input field and a custom control. when I enter a material number in the input field and press ENTER the custom cont

  • Command for remove zeros in sapscript

    Hello: I need to remove zeros of a variable in a sapscript, TALGN = 0000427795776 and I need to remove the zeros so: TALGN = 427795776 But sometimes will be 3, 4 or more zeros, is there a way to do it with a sapscript command? or this should be done

  • Adobe Flash Player Installer always stops downloading

    I just formated my Macbook and made a clean reinstallation of OS X (10.10.1). However, apparantly I can't install the adobe flash player (for safari). I download it from http://get.adobe.com/de/flashplayer/ but the installer always pends on downloadi