XI monitoring log version

Hello,
Can you please anybody tell me what is log version in SXI_Monitor. I have a HTTP to RFC synchronous scenario. For of my message i can message status as log version and i dodnt see any response in Moni. This is happending for few messages.
Please help me abt this.
Thanks,
Vishal

> Can you please anybody tell me what is log version in SXI_Monitor. I have a HTTP to RFC synchronous scenario. For of my message i can message status as log version and i dodnt see any response in Moni. This is happending for few messages.
>
Hi,
The synchronous scenarios are not stored in XI database (they are not persisted). In order to see them in SXMB_MINI, you have to change the log level to 2. This can be done in SXMB_ADM - Integration Engine Configuration -RUNTIME - LOGGING SYNC to 1.
The status log version shows that the message got processed in IE.
VJ

Similar Messages

Log version status for message in PI message monitoring

Hi All,
we send IDocs from ECC to PI and then external systems. It's working fine all the time But third party system did not recieve only one message out of many. This missing message showing in PI is like LOG version when I look at in monitoring.It was happend long back and its still showing as scheduled.
And also there were no pending messages in the queue.
any idea what happend for this message exactly ?
Thanks .

Hello
Check the notes below:
#1471001 PI monitor: Synchronous response is displayed as log version
#1256891 Logging errors in synchronous communication
These may help explain/fix the error.
Regards
Mark

Status "log version" in message monitor

Hi,
In a proxy to JDBC scenario, i'm getting status "log version" in sxmb_moni.
I'm trying to insert some records in target JDBC file and recovery JDBC response in a synchronous message interface.
However, i never have ssen JDBC response .
Why?
What does "log version status" means?
Thanks ,
Carme Alentorn

Hi Carme,
The meaning of Log version is " When ever wrong entry field pass to the target end the problem will be raised.
(Spicial chacters or more fields extra)
I think it exatly data will be wrong.check ur data end.
and check the adapter status.
Regards,
Sateesh

LOG VERSION STATUS IN MONI

Hi Guys,
i am getting synchronous messages status as " TO BE DELIVERD" in Runtime workbench-Integration engine monitoring, i tried to resend this to be deliverd message from Runtime work bench i'm getting error mesaage " Unable to schedule 1 of 1 messages for processing; update the status"
how i will update the status as per above message ?
when i checked with same message id in MONI, its showing as status "LOG VERSION ".
Can any one help me on this how to resolve this issue..
Thanks,
Siva

Hi,
Messages might got blocked in SMQ2.
If you found messages in Queue double click on the queue --> if there is any issue in the messages ---> double click on the messages which redirects you to moni try to rectify the error and reprocess again
Regards,
naveen

Batch Monitor Log and Status translation list

Could someone point me to the page that explains what the batch monitor log is saying?
Status: Failed - 3x crash service down (This seems odd since I don't have a server and am using the This Computer option.
or
?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<logs tms="306256137.206" tmt="09/15/2010 11:08:57.206" pnm="Batch%20Monitor">
<log tms="306256137.208" tmt="09/15/2010 11:08:57.208" pid="4113" kind="mrk" sub="error" what="get-log" avail="false" msg="Get log query not supported."/>
</logs>
I don't mind looking up these, just need to know where to look.
Thank

Ok, no one knew.

Log Version

Hi gurus,
we have a lot of messages on sxmb_moni by "log Version" and does not have a particular status. How can we change the status feom scheduled to "error". We would like to delete after that.
Kind Regards,
Peter

Hello,
Please check if the notes below are relevant for your SP:
1471001 PI monitor: Synchronous response is displayed as log version
1044200 XI Runtime: Dump when restarting messages
1161002 XI runtime: Activity monitor
Regards,
Sarah

Monitoring Log in SharePoint Foundation 2010

Hello,
I´m using SharePoint Foundation 2010 and I want to configure Monitoring log, because we have had any problems because the user changed the permissions in other sites or deleted Users.
So I want to know who makes this action in Monitoring Log SharePoint 2010.
Regards.

Take a look at this 3rd party solution:
https://auditlogsp.codeplex.com/
The Site Collection Administrator can modify audit settings, but audit settings aren't available OOTB in Foundation.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to Dal with Log Version in SXMB_MONI

DEAR EXPERTS,
sCENARIO:
FILE-----> PI -
> SAP ECC
Sender - File adapter
Recv - Proxy
Mode_ Sync.
Some of the messages are going to STATUS - *Log Version IN SXMB_MONI. This is happening Intermitently.
How to avoid log version in sxmb_moni..Any SAP Note available.....
Take care,
Pooja

This probelm occurs randomly... There are no data related isues.
there may not be a solution to this problem...may be just a precaution......just check with the end system developers and verify what was the status of the application when they processed the Req from XI (for which you got Log Version).....
Other way to deal with this problem is resend the message.....AFAIK there seems to be no other way out.....if you find any then please let me know
Regards,
Abhishek.

Communication channel monitoring logs

Dear all,
on weekend we had a problem with a CC. Messages not have beend pick up from
a FTP server. The problem was solved automatically and I was not able to see
any error entries in the CC monitoring log files because there were to many
entries without error.
My question:
Is there an option for persisting the logs into a trace file on server? I was not
able to find the entries in defaultTrace or anywhere else.
How to raise the time/size of the log files?
Thanks
Chris

Hi,
I think the channel was getting locked and so, it could not pick up any data.
Refer the SAP note 849089 for this.
-Supriya.

Cannot open Microsoft Office Mac 2011 after migrating to new computer. OS 10.9.1: Microsoft Error Reporting log version: 2.0 Error Signature: Exception: EXC_CRASH (SIGTRAP) Date/Time: 2014-01-19 23:31:24 0000 Application Name: Microsoft Word Application

Got a new MacBook Pro and migrated my settings and applications from old computer. Reinstalled Microsooft Office from a disk, after I opened a document and it said I was missing some software components. Now when I open any office application, I get:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_CRASH (SIGTRAP)
Date/Time: 2014-01-19 23:31:24 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.9.131030
Crashed Module Name: merp
Crashed Module Version: 2.2.4.131030
Crashed Module Offset: 0x00004422
Blame Module Name: MicrosoftSetupUI
Blame Module Version: 14.3.9.131030
Blame Module Offset: 0x0000e516
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0

Hi,
Do you get the error message like "Office <Update version number> can't be installed on this disk. A version of the software required to install this update was not found on this volume. To learn how to fix it this issue, see "I can't install Office
for Mac updates" at http://www.microsoft.com/mac/help.mspx."
If it was, please follow the kb to fix the issue:
http://support.microsoft.com/kb/969065/en-us
Then, here is a forum for Office based on the Windows operation system, we are lack of the source about the Office for mac, you'd better post your question to Answers forum:
http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
Regards,
George Zhao
TechNet Community Support

Need help in generating L4 Traffic monitor logs

Hi,
As a part of my project I need to study different types of logs produced by Cisco IronPort. I could generate some access and authentication logs however not sure about generating the L4 Traffic Monitor logs. Can anyone point me to right documentation that will help me generate those logs?
Thanks,
Harshad Kashikar

Harshad,
L4 Traffic Monitoring needs to be configured within the IronPort - first question is do you have a SPAN/TAP port set up on your switch to capture L4 traffic?
Second, I only use this feature to capture information on malware/spyware - I have seen P2P, IRC, and 'phone-home' traffic amongst other things. Do you have an infected host you can monitor?
BF

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Log version in SXMB_MONI

what is the meaning of this particular message ?? If this error occurs where and what should we check ?? How to sort out the problem ??
Log version
This message version was generated by logging and does not have a particular status.
thanks
kumar

Hi Palnati
refer the below links
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5
http://help.sap.com/saphelp_nw04/helpdata/en/44/f5c3de84056c30e10000000a114a6b/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01e9400-9e81-2910-20a5-a862945a5e98
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a90d6aa-0b01-0010-8a83-cf0e6c70dcce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Hope this will solve ur issue related to SXMB_MONI
<b>Pls reward if useful</b>

MONI Message Status as Log Version

Hi Guys,
In MONI few of messages getting status as Log Version..Could any one plesae let me know why ? and what is best way of solution for this...
Thanks,
Siva...

It is the processing instance of the mesg. If you restart the mesg for failure reason, it will version until execute successfully with version numbers.
Refer this link if you have problem in the proxy side
Log version in sxmb_moni in recever system (soap to proxy scenario)

Log version status in Integration Engine

Hi,
When montioring in Integration engine, couple of my messages are in 'Log version' status. These messages are in this status for the past two days.
We are not able to cancel these messages also.
What is the workaround solution to these messages.
Thanks,
Swapna

It could be due to huge processing of message/data
Do a complete cache refresh and check the same
The solution in this thread points to XI BATCH.
Log version in sxmb_moni in recever system (soap to proxy scenario)
Edited by: Anusha Ramsiva on Aug 6, 2008 2:57 PM

XI monitoring log version

Similar Messages

Maybe you are looking for