XI not polling on the R/3

Hi Guys,
The Sender file adapter which i had setup is not polling onto the R/3 AL11 whereas it is polling on the XI, AL11....
The configuration is done to pick the file from R/3. Iam using the NFS as Transport Protocol.
Thanks in Advance.....

Hi Kittu,
Whenever u r using NFS, it only refers to XI system. i.e., it picks up the file from the system where XI is installed.
In order to pick a file from any other location than XI, u need to configure an FTP server for Transport Protocol.
Regards,
Prateek

Similar Messages

Sender file adapter not polling the file

hi all,
i have configured a filexifile scenario....
but the file sender adapter is not polling the file at all....
i dont c any message either in RWB or in SXMB_MONI
i checked the adapter framework url at http://<ximachine>;<port>/AdapterFramework....and the status for the file adapter is green...
but the message it gives there is
Sender Adapter v1014 for Party '', Service 'TASL_FILE_SENDER':
Configured at 03:07:24 2006-02-02
Up and running - no message processing until now
last poll interval started 04:01:24 2006-02-02
length 60,000 secs
y is the sender adapter not polling the file..
i am using NFS as my File System....i gave the source directory as d:/test_dir/
is this way of specifying the source directory on a windows machine correct...
thanks
pavan

There is probably something wrong with the File Adapter. You will need to go to the RunTime Workbench >> Component Monitoring >> Display >> Click on the Adapter Engine >> More information will display and click on the button 'Adapter Monitoring' >> A new window will display and click on the arrow next to your adapter engine. This displays a list of adapters running on your system. Green light means good; Red, you have a configuration problem. Look at the error and try and resolve it.

Sender file adapter is not polling the file.

Dear all,
Sender file adapter is not polling the file.(But Receiver file adapter is getting the file)
we have installed SP15.
It was worked fine for previous SP14.
I have cheked in Adapter monioring also.
Can you help me out of this problem
Regards
Dhanabal

Hi Dhanabal,
Is the XI system running on a unix machine ?
If yes, from the OS level for the folder you are using in the file comm. channel, execute the command
chmod 777 <folder_name>
The reason for the file to show up in receiver side and not get deleted might be that the xi user mighht be having only read access to the folder...
Thanks,
Renjith.

B2B adapter is not polling any data from EDI X12 810 ECS file

Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AM

Hi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code     B2B-50547
Error Description     Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id     7F00000113CFC36785C0000017D7E2B0
Message Id     7F00000113CFC36785C0000017D7E2B0
Business Message     7F00000113CFC367A450000017D7E2B7
Packed Message     Packed Message
Payload     Payload
Protocol Message Id     EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest     Message Digest
Digest Algorithm
Transport Protocol     File
Transport Protocol Version     1.0
Url     file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates     certificates
State     ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size     2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM

Polling of the current file from multiple files in the FTP Server

Hello Experts
I am working on a file to file scenario.We have to poll the file from the FTP server which may contain multiple files with different creation dates.The requirement is to poll only the file created in the current date.Could anyone throw some light on this.
Thanks & Regards
Sabyasachi

Hi Sabyasachi,
You can archive the files that you do not need into another folder manually for the first time.
Later you can schedule the file adapter to poll the folder only once in a day (Poll INterval = 86400 secs)
Do not forget to set the option to archive/delete the file that are already processed.
Regards,
Ravi Kanth Talagana

File Adapter polls all the files from the directory when deployed again

Hi,
File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
My guess is that it should not pick all the files but based on timestamp only.
I guess I can observe the same behavior if I bounce the Application Server also
Do I have an option to achieve this?
Thanks,
Sasi Bhushan.

try this:
1- create a File object for the directory. (look at isDirectory() )
2- create a File[] that represents the files in that directory. (.listFiles())
3- if (file[x].isDirectory()) {recursive method call;}
4- else {
process file;
If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving.

Polling from the database view in BPEL 11g

Hi,
We do have a requirement of polling from the database view in BPEL 11g. I am exploring the following polling strategies in our case:
- Delete
- Logical Delete
In case of Delete polling strategy, can we delete the record as the view does not allow deletion. In this case, do we have any other way to achieve this functionality?
In case of Logical Delete, We have to mark the status column with particular value. how could we achieve the same when the view is not updateable.
In 10g, we can override the delete polling strategy with an update statement. Is it possible in 11g?
Thanks & Regards
Siva

Hi,
I am also doing the same thing what you have done, please help me.
I have used BPEL export utility for exporting my JPDs to BPEL. but it was not a good help, ultimately i m creating a process manually.
the main problem what is the replacement of control(jcx files)
please guide me really it would be great help..
Thanks in advance and hope to hear from you.
my mail id is [email protected]
please send some document if you have...

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

Jms adapter not polling messages from jms topic

Hi
We have a jms adapter configured in BPEL process which need to poll messages from JMS topic.Unfortunately its not polling message from JMS Topic if we add Message Selector and Durable Subscriber properties in jca file.Please find jca file content below
<adapter-config name="SyncCustomerPartyListCDHJMSConsumer" adapter="JMS Adapter" wsdlLocation="oramds:/apps/AIAMetaData/AIAComponents/ApplicationConnectorServiceLibrary/CDH/V1/ProviderABCS/SyncCustomerPartyListCDHProvABCSImpl.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/jms/aia/syncCustomerParty_cf" UIJmsProvider="WLSJMS" UIConnectionName="Dev"/>
<endpoint-activation portType="Consume_Message_ptt" operation="Consume_Message">
 <activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec">
 
 <property name="PayloadType" value="TextMessage"/>
 
 <property name="UseMessageListener" value="true"/>
 <property name="DestinationName" value="jms/aia/Topic.jms.COMMON.CustomerParty.PUBLISH"/>
 </activation-spec>
</endpoint-activation>
</adapter-config>
If we remove Durable subscriber and message selector properties,its able to poll messages.
Any pointer will help
thanks in advance
Baji

After changing below property in jca file.JMS adapter is able to poll messages from JMS Topic.
<property name="UseMessageListener" value="false"/>
But if i un comment below line and deploy my code again, it stop pulling the messages from topic.
<property name="DurableSubscriber" value="XYZ"/>
If i bounce the server after above change and deployment ,it will start polling the message.I am not sure why i need to restart my server after adding above property.
Thanks
Baji

FTP Adapter not polling

Hi,
We have a clustered environment in Oracle SOA 10.1.3.4 MLR#1. We are setting up 3 different bpel processes polling 3 different locations and using 3 different data source. When we deploy them none of the ftp polling is working. We looked at various blog and added property for ClusterId
<property name="clusterGroupId">myBpelAdapterCluster</property>
I also tried using a different clustergroupid for each of the bpel process.
Does this clusterGroupId should be different for each BPEL process or can we use myBpelAdapterCluster for all 3. Please suggest me what may be the cause for the ftp adapter not polling.
Thanks
Jagan.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

BizTalk 2013 SFTP adapter not polling

Hi,
I am trying to poll some files from an SFTP location. I have configured my SFTP Receive Location on the BizTalk Server 2013. However I do not see any polling happening.
I have a BizTalk Server 2006 R2 environment from where I have configured the polling from the same location (this is ofcourse stopped when using the BizTalk 2013). From here, the polling is happening fine (bLogical sftp adapter).
Can you please let me know if I am missing any other steps apart from the RL configuration.
Regards,
Ujjwal
-Ujjwal

Though you have been using SFTP process with your BizTalk 2006 environment, your new BizTalk server may have new IP and new configurations. So ensure the SFTP server where
you’re trying to receive the files from allow this new server.
First try to use any SFTP client tools like
FileZilla or
WinSCP and see whether you can connect to your SFTP server. This would help you to solve some of the access issues.
Ensure your IP (external IP) is not blocked by your SFTP server. If any firewall is involved between, check this firewall is not blocking the access.
Also ensure that values you give while configuring the Security section of the Receive Location is correct. Most of the issues around the SFTP adapter trying to receive the
files are Firewall issue, Security properties configuration.
Also check
this SFTP adapter article from TechNet Wiki for more help..
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>

BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards.

Selective Polling in the Sender File Adapter

Hi,
I have the following requirement
1) File X is placed in the directory which is the source file for the sender adapter to poll
2) File X is appended regulary with data until it is polled. During this appending the sender adapter should not poll this file
3) Current process (without PI) they use a control file to stop this happening. i.e. they place a File Y in the directory to show the file is being updated and not to be touched. Once The file is appended File Y is removed and the file should be polled
So ultimately I have to configure the sender adapter to poll for File X (say every minute) except when there is File Y in the directory.
Any ideas?

Hello,
You can use the "Msec to wait before modification check" feature in sender file adapter to achieve the requirement.
No need to place the "File Y"...i.e step 3 to perform.
Check the below link for more details:
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/658ac3344a4de0e10000000a1553f7/frameset.htm
-Rahul

Sender SFTP Adapter channel is not polling for files

Hello All,
Couple of SFTP sender adapter channel was failing in Developent system with u201Cdirectory listingu201D error.All SFTP sender channels stopped polling for the files in Developent system . We were unable to find the reason for adapter failure, Hence we restarted the j2ee server and adapter started polling files. Later we are facing the same issue in Quality system. THe adapter cahnnel is not polling files in Quality system even.
All lean tool adapters were showing the u201CHost key was not accepted erroru201D on 27th of Feb . As per the other channel trace, the time stamp of last successful polling and error time stamp of lean tool sender channels are exactly same
Eventhough two communication channels access the same SFTP adapter, one communicationchannel is getting 'Host key was not accepted error' but in other communication channel, files are getting picked.
Please let me know the solution if you have come accross this issue previously
Regards,
DilipKumar

Hi Mike,
Thanks for your reply.
Its not a standard SFTP adapter rather its a C-BURGER SFTP adapter.
Sorry I did not mention this in my previous post
Regards,
DilipKumar

Communication Channels do not appear in the monitor

I have just created a sender and receiver file adapter and activated them. I tested them in a process by dropping a file into the sender directory with a 10 second poll interval. The file is not being processed.
If I check the corresponding Integration Server Adapter Engine status, there is a green light, BUT When I select the Communication Channel Monitoring button, there are no channels!
Also, although I have created parties that use these channels, they also do not appear in the filter drop down list.
Is there some reason why these channels are not appearing?
Just for clarification; this is on a new XI installation.
Kind Regards,
Tony.

Hi,
import SAP basis software component into repository
as per question:
3. I can't see my adapters in the adater monitoring after the import of a new SP
on XI FAQ
for PI 7.0 - sap basis 7.0 for XI 3.0 sap basis 6.40
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

XI not polling on the R/3

Similar Messages

Maybe you are looking for