XI PCK for Business One Integration

Hi,
can I use the XI Partner Connectivity Kit (PCK) for SAP Business One to integrate B1 with ERP via SAP XI? What is DI API exactly?
I don't see the point implementing another middleware like B1i when I use SAP XI for integration with mySAP applications.
Thanks in advance.
Alex

Alexander,
You can use XI as a connector instead of ALE to connect mySAP ERP to B1i. The DI API is the connector for SAP Business One. The DI API or Data Interface API is part of Business One and the Business One SDK. B1i exists to easily connect mySAP and SAP Business One without typical coding that would be required simply by using XI to connect with SAP Business One and mySAP. B1i contains all of the connections, pre-defined content, message handling and error correction for common business scenarios to connect these to systems. Without B1i, you have to hand code everything. If you are not connecting with SAP Business One, then you may not have a need or requirement to use B1i. There are more detailed whitepapers here from the SAP Business One main page on SDN. You should have a look at those.
Eddy

Similar Messages

SAP Business One Integration Services Authentication Failed

Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish Gupte

Hi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte

Error when starting SAP Business One Integration Server Service

Hi all,
I have a very urgent problem when installing B1iSN:
I'm installing B1iSN2007 for a customer (Windows server2008R2, SBO 8.8.1),
and at the beginning of the installation, after instaling the technology, I have an error,
The Tomcat server can't start.
I get the following error:
Windows could not start the SAP Business One Integartion service on Local Computer. For more Information, review the system
event Log.If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0.
In the event viewer I didn't find any more details.
In the tomcat logs (Under SAP Business One Integration\B1iServer\tomcat\logs) I find this:
[2012-01-05 15:12:26] [info] Procrun (2.0.4.0) started
[2012-01-05 15:12:26] [info] Service Tomcat5 name SAP Business One Integration Service
[2012-01-05 15:12:26] [info] Service Tomcat5 installed
[2012-01-05 15:12:26] [info] Procrun finished.
[2012-01-05 15:12:26] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:12:26] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:12:26] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:13:13] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:13:13] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:13:13] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:15:27] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:15:27] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:15:27] [1269 prunsrv.c] [error] ServiceStart returned 1
What is the problem? How can I fix it?
Thanks a lot
Chana

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

Cannot start widget - Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started

Dear Experts .
I'm trying to enable widget for my company db but getting the following error :
Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again
I can connect to the B1iF locally and remotely .
I have the db configured in the SLD and connects successfully .
I have the event sender service and proxy started and configured for the company db.
I can access the Dashboard web portal and login with database sap credentials (but I see nothing there)
I've checked that there are no duplicate entries in the SSLD table for SBO common (note : 1619422)
I've also tried to re-activate the xelcious from the B1iF->control.
My Setup :
I'm runing SBO server, B1iF installed locally and B1iSN installed on a 3rd party server.
I'm using B1iF as even forwarder for B1iSN.
I know this has been discussed many times through out the forum and I've tried most of the stuff other than clean install.
I would appreciate any input before removing B1iF completely and re-installing.
Thanks in advance ,
Nadav.

Hi,
The problem is SAP 8.81 PL04, with PL05 or PL06, it is solutioned.
Thanks,

Can't Install Business One Integration

Hello you all.
I'm trying to install the Business One Integration and it keeps giving me an error. I checked the Log File and the error line is this:
Error occurred while installing the following Action, hence rolling back the installation....!
Action Name:
Action Description: Import Dataset:
Error Details as below:
BPE001 Nested exception: java.lang.OutOfMemoryError: Java heap space (failed to allocate 122791960 bytes)
I have checked all the forums and can't find a solution for this issue.
Any thoughts?
Best Regards

Hi,
Check this thread.Could not able to install the B1 Integration Component
Best

Error 1316 when install Business One Integration Server

Hi, i have a problem when i try to install SAP integration Server. i already uninstall the previous version, and when i try to install it again, there is an error message "Error 1316. A network error occurred while attempting to read from the file C:\Windows\Installer\SAP Business One Integration Server.msi"
is there anybody can help me?

Hello Ferly! Welcome to the forums.
You can check out this site right [here|http://www.error1316.com/]. It could also be that you aren't the domain administrator as well. Try running it as an Administrator and see if that works before you try anything on the link that I gave you.

Need design Docs for Business One.

HI All,
Background: I am from a SCM background and wanted to familiarize myself with SCM software of SAP specifically for the SMB market.
What I want to learn: As mentioned above, the SCM solution of SAP for SMB market...all modules related to WM (Warehouse Management).
My interest in Architecture/Application: Both - technical as well as functional aspects of the SCM with a focus on WM.
From my perspective for SCM all modules of WM - Receiving, Putaway, Wave, Cross-Docking etc.
Will it be possible for you to assist me find some relevant documents/ppts regarding the same?
Thanks in advance,
Harsh.

Hello Harsh,
Good to learn about your interest in knowing the WM side of SAP B1.
SAP Business One (out of the box) does not really have a WM / WMS module to handle the different aspects of the warehouse function.
This is being supplimented by a few Add-ons which provide this functionality to SAP B1.
RadioBeacon is one such addon from a company called Accellos based out of Toronto, Canada.
CitiXsys also has a WMS solution for Business One and that apart there are a few.
Pretty much all software would handle the basic WMS functions of Receiving, Putaway, Picking, Cross dock, Replenishment etc.
Unless you work with the specific Addon you would not have anything to learn on the SCM / Logistics / WMS side right out of Business One.
Let me know if you need more details
Suda

OOT: Configuration Wizard for Business One (Tools)

Hi All,
Do you have any idea to download "configuration wizard for business one tools" ? I've try download it, but unfortunately the connection suddenly terminated.
Somebody like to share?
Thanks and regards
(the tools is taken from download menu from this forum)
Edited by: Susanne Klemm on May 7, 2008 1:51 PM
Edited by: Philip Eller on May 21, 2008 9:02 AM

Hi,
Did you try this link?
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/sdn/go/portal/prtroot/docs/library/uuid/1099ac47-4c73-2a10-69af-d11b130cc68a
Regards,
Paul SAP Business One Forums Team

SAP lumira for business one?

I am using a non HANA setup for SAP business, does SAP offer a license for Business One customers?

hi jonathan
sap launch new product SAP Lumira, Edge edition for small and medium business thisproduct also known as sap lumira server for team. this will not require any HANA connection.
please check http://scn.sap.com/community/lumira/blog/2015/01/19/its-here-sap-lumira-team-server-edge-edition above link.
this may help you.

Supported operating systems for Business One

Hello,
I was under the impression that Business One was a solution for smaller organizations and only was officially supported for the msft operating system.
Can someone clarify/confirm if this is correct?
There is a pdf on this SDN site that seems to indicate that Business One also is supported for 64bit Linux: SAP Business One Application General [original link is broken]
Thanks.
Mike

If you read the article carefully, it clearly mentioned It is not official SAP document. Secondly, it is only talking about B1 2004 version. That is very old version as now 2005 would be soon out of mainstream support.
You first assumption is correct. Only MS Windows is supported OS and B1 is designed for SME.
Thanks,
Gordon

Sample questions for Business One certification

Hi
I am looking some sample questions for SAP business one implementation consultant certification exam.
please Gurues , help me in this matter. I am going to write certification in next week
thanks
Preeti Sati

Hi Preeti,
the test is not that easy, I found that I really had to read the questions carefully & the multiple-choice answers even more carefully. Some of the answers initially looked as if they were saying the same thing & I needed to look twice to discern the tiny difference. It's these tiny differences that made it difficult, in my opinion.
Generally, I thought it touched on most aspects of 2007, with particular emphasis on the enhancements from lower versions. But if you have a good understanding of the product, look at all the e-learning & also, very important, at the available ETS & documentation, you should do well.I found the e-learning a bit limited & definitely benefited from the other materials available on the SMP.
Good Luck!
All the best,
Kerstin

Basics that are reqd for Business One SDK

Hello Eveyone,
I am new to this technology. I am working on Dot Net technologies from past 3 yrs.
I came to know that b1 sdk is on dot net.
So, i have decided to learn this SAP course.
So, Can anyone suggest me the road map for learning the SAP b1 SDK..
Thanks In Advance.....

Sishir,
To learn the SAP Business One SDK, I suggest that you start with the SAP Business One SDK Help Center Documentation that comes with the SDK when you install it as well as reviewing the SDK eLearning here ...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/6207e283-0a01-0010-6c84-bacd2745c33f [original link is broken]
Once you understand the SDK ... you can also reveiw the SDK Tools available to you at ...
SAP Business One Tools [original link is broken]
HTH,
Eddy

Skype for business and integration with my pabx

how much would it cost for me to get skype-for-business for 500 users ? who can assist me with the information?

how much would it cost for me to get skype-for-business for 500 users ? who can assist me with the information?

Support for Business One in a Virtual (VM) environment.

First post - if I have the wrong location let me know.
Given note 14920000 can anyone explain the statement below that I got from my reseller after contact with SAP Support? I am told this was the statement from SAP Support.
unfortunately SAP Business One will no longer provide any support statements on virtualization software as we consider it the virtualization vendor#s responsibility to
ensure operating system compatibility. SAP Business One is running on virtualization software just as it is running on non-virtualized operating system platforms.
Thanks,
Scott McClure
Omega Morgan

Hi Omega,
The message is clear: SAP will only treat the OS on the VM as the same as the original. Whatever related to VM issue, that is not SAP's business.
Thanks,
Gordon

Configuration in SAP Business One integration 8.8 for SAP NetWeaver (B1iS)

hi,
i had schedule the background job (Scheduling Jobs using Tcode, RBDMIDOC) for Master Data Distribution Customer
(DEBMAS).The schedule job show succeed.Then, i go to B1 configuration for B1iSN and define a Business Partner Bizpackage
instance.After that , i go to activate it which under Business Processes --> Process --> Master Data.
How can i know the process was start running because when i go check the Message Log under Monitoring, it;s show nothing ?
Thanks

Hi Elsen,
If you are trying to run B1I and B1iS, they are incompatable on the same machione. That said, I am not clear what type of scenario you are attempting? If the incoming data is in the form of a SBO Object, you can confirm that the action happened on the sending system, also do the same for the reverse on the receiver system.
If the sender system completed the task, then you have setup the inbound criteria or SLD incorrectly therefore not triggering B1i.
I hope this helps you,
Mike

XI PCK for Business One Integration

Similar Messages

Maybe you are looking for