XI pdf materials

Hi ..
If anybody is having the pdf materials of the XI(Related to sap basis concepts), then please forward them to my email id:
<b>
email ID removed</b>
I will be thankfull to you..
Regards
Abhi
Message was edited by: SDN PI/XI Forum Moderator
Kenny Scott

Hi Abhi,
This is against the sdn tool to share email ids but i have some information regarding XI. Just go through these links :
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
Following are the links to weblogs which will help to develop the basic scenarios.
file to idoc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
*Pls reward points if useful*
Regards,
Shibani

Similar Messages

How to use Adobe acrobat for PDF editing ?

Hello, I'm Shankar and I'm a website developer. I use to upload lots of Pdf in my Website named eventalerts.in. In my website I want to edit some of the unwanted things and then to be upload. I unable to edit those Pdf materials. Please any one can help me .

You'll want to ask in the Acrobat forum: Acrobat
But the difficulty of editing a pdf can vary from somewhat easy to very hard to impossible depending on the pdf. You'll want to give them more info over there as to what types of editing you want to do and maybe even link to a sample pdf if you can.

There is an Oracle Certified Trainer program?

Hi all,
Can anyone tell me if there is an Oracle Certified Trainer program, in the same way as the Microsoft MCT (Microsoft Certified Trainer)? If the answer is yes, how to achieve it? I´m already OCP (Java Programmer I/II). Can an OCP teaches
Who can get access the official PDF materials for the trainings (Instructor-Led Courses)? Can the trainer download it or the Learning Partner Center only?
An Certified Professional (OCP) can minister Official Oracle Training or is there any special requirement?
Thanks in advance!

compile-single:
run-single:
java.lang.NullPointerException
at java.awt.Container.addImpl(Container.java:621)
at java.awt.Container.add(Container.java:307)
at calculator1.calculator1.<init>(calculator1.java:31)
at calculator1.calculator1.main(calculator1.java:48)
Exception in thread "main"
Java Result: 1
BUILD SUCCESSFUL (total time: 7 seconds)
package calculator;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class calculator1 extends JFrame {
JLabel welcome;
JLabel value1;
JTextField value1text;
JLabel value2;
JTextField value2text;
JTextField result;
JButton addition;
JButton subtract;
JButton multiply;
JButton divide;
JLabel operation;
JLabel equals;
public calculator1() {
super("Calculator");
setSize(600, 400);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
FlowLayout flow = new FlowLayout(FlowLayout.CENTER);
getContentPane().setLayout(flow);
getContentPane().add(value1);
getContentPane().add(value1text);
getContentPane().add(operation);
getContentPane().add(value2);
getContentPane().add(value2text);
setVisible(true);
public static void main(String args[]) {
try {
UIManager.setLookAndFeel(
UIManager.getSystemLookAndFeelClassName());
} catch (Exception e) { }
new calculator1();
calculator1 window = new calculator1();
window.setTitle("Input Two Values Calculator");
window.pack();
window.show();
}

Reg C_TEP12_04S

Hi all,
I want to write the above certfication exam.
I have some doubts.
whether this certification exam is available.
any inputs for me form all to attend this exam
Any PDF materials from already attended guys?
where can i get this any sites or links.
If any one have usefull materials reg this course plz mail to [email protected]
How to preperae?
Any sample questions or dumps available to prepare?
Thanks & regards,
Lokesh.
Points will be rewarded immediately
Edited by: lokesh kamana on Jun 10, 2008 9:22 AM

Hi all,
I want to write the above certfication exam.
I have some doubts.
whether this certification exam is available.
any inputs for me form all to attend this exam
Any PDF materials from already attended guys?
where can i get this any sites or links.
If any one have usefull materials reg this course plz mail to [email protected]
How to preperae?
Any sample questions or dumps available to prepare?
Thanks & regards,
Lokesh.
Points will be rewarded immediately
Edited by: lokesh kamana on Jun 10, 2008 9:22 AM

Report_dynamically

Hi Experts
My requirement is report output will display using reuse_alv_grid_display like
Group   product    Characteristics        unit   may-10 June-10 July-10 Aug-10 to Apr-11.
12        ABZ        Plant A order        ea     1           2           2            2 ..........
                       Plant A arrival      EA     2           3           5            6
                       Plant B order        Ea     2           3           3            3
                       Plant B Arrival      EA     4           6           8            10
For every material all the the characteristics are to be display in the same order , how to prepare field catalog , now i am doing like this prepare a field cat dynamically with Group product Characteristics unit and 12 months data , but how to i repeat characteristics for every material
Thanks in Advance....
Krishna

you can get this by creating a formula variable with customer exit -and give offset values for it.
Of check the below link which may give u idea of using rpelacement path var
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
materials will be displayed in the same format.

Difference between MRP & SRP

Hello everyone,
Can anyone help me out by providing me the difference between Material Requirement Planning (MRP) & Stock Requirement Planning (SRP)
Regards,
Indranil

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMCBPCBP/MMCBPCBP.pdf
Materials Requirements Planning (MRP)
MRP is a planning tool geared specifically to assembly operations. The aim is to allow each manufacturing unit to tell its supplier what parts it requires and when it requires them. The supplier may be the upstream process within the plant or an outside supplier. Together with MRP II it is probably the most widely used planning and scheduling tool in the world. MRP was created to tackle the problem of 'dependent demand'; determining how many of a particular component is required knowing the number of finished products. Advances in computer hardware made the calculation possible.
Master Production Schedule
The process starts at the top level with a Master Production Schedule (MPS). This is an amalgam of known demand, forecasts and product to be made for finished stock. The phasing of the demand may reflect the availability of the plant to respond. The remainder of the schedule is derived from the MPS. Two key considerations in setting up the MPS are the size of `time buckets' and the `planning horizons'. A `time bucket' is the unit of time on which the schedule is constructed and is typically daily or weekly. The `planning horizon' is how far to plan forward, and is determined by how far ahead demand is known and by the lead times through the operation. There are three distinct steps in preparing an MRP schedule:
exploding
netting
offsetting.
Exploding
Explosion uses the Bill of Materials (BOM). This lists how many, of what components, are needed for each item (part, sub assembly, final assembly, finished product) of manufacture. Thus a car requires five wheels including the spare. BOM's are characterised by the number of levels involved, following the structure of assemblies and sub assemblies. The first level is represented by the MPS and is 'exploded' down to final assembly. Thus a given number of finished products is exploded to see how many items are required at the final assembly stage.
Netting
The next step is 'netting', in which any stock on hand is subtracted from the gross requirement determined through explosion, giving the quantity of each item needed to manufacture the required finished products.
Offsetting
The final step is 'offsetting'. This determines when manufacturing should start so that the finished items are available when required. To do so a 'lead time' has to be assumed for the operation. This is the anticipated time for manufacturing.
The whole process is repeated for the next level in the BOM and so on until the bottom is reached. These will give the requirements and timings to outside suppliers.
There are three major assumptions made when constructing an MRP schedule:
The first, and possibly the most important, is that there is sufficient capacity available. For this reason MRP is sometimes called infinite capacity scheduling.
The second is that the lead times are known, or can be estimated, in advance.
The third is that the date the order is required can be used as the starting date from which to develop the schedule.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Difference between MRP & CBP

Dear All,
Can any body tell me what is the difference between MRP & consumption base planning (CBP),
Best regards,
ABBAS

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMCBPCBP/MMCBPCBP.pdf
Materials Requirements Planning (MRP)
MRP is a planning tool geared specifically to assembly operations. The aim is to allow each manufacturing unit to tell its supplier what parts it requires and when it requires them. The supplier may be the upstream process within the plant or an outside supplier. Together with MRP II it is probably the most widely used planning and scheduling tool in the world. MRP was created to tackle the problem of 'dependent demand'; determining how many of a particular component is required knowing the number of finished products. Advances in computer hardware made the calculation possible.
Master Production Schedule
The process starts at the top level with a Master Production Schedule (MPS). This is an amalgam of known demand, forecasts and product to be made for finished stock. The phasing of the demand may reflect the availability of the plant to respond. The remainder of the schedule is derived from the MPS. Two key considerations in setting up the MPS are the size of `time buckets' and the `planning horizons'. A `time bucket' is the unit of time on which the schedule is constructed and is typically daily or weekly. The `planning horizon' is how far to plan forward, and is determined by how far ahead demand is known and by the lead times through the operation. There are three distinct steps in preparing an MRP schedule:
exploding
netting
offsetting.
Exploding
Explosion uses the Bill of Materials (BOM). This lists how many, of what components, are needed for each item (part, sub assembly, final assembly, finished product) of manufacture. Thus a car requires five wheels including the spare. BOM's are characterised by the number of levels involved, following the structure of assemblies and sub assemblies. The first level is represented by the MPS and is 'exploded' down to final assembly. Thus a given number of finished products is exploded to see how many items are required at the final assembly stage.
Netting
The next step is 'netting', in which any stock on hand is subtracted from the gross requirement determined through explosion, giving the quantity of each item needed to manufacture the required finished products.
Offsetting
The final step is 'offsetting'. This determines when manufacturing should start so that the finished items are available when required. To do so a 'lead time' has to be assumed for the operation. This is the anticipated time for manufacturing.
The whole process is repeated for the next level in the BOM and so on until the bottom is reached. These will give the requirements and timings to outside suppliers.
There are three major assumptions made when constructing an MRP schedule:
The first, and possibly the most important, is that there is sufficient capacity available. For this reason MRP is sometimes called infinite capacity scheduling.
The second is that the lead times are known, or can be estimated, in advance.
The third is that the date the order is required can be used as the starting date from which to develop the schedule.

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

Need Smartform materials in PDF Format

Hi Guys,
Please give me the links to download the SMARTFORM materials in PDF format.
I am new to smartforms so i need all the materials to learn SMARTFORMS.
Regards,
Chandru

for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Subtotals - Check the link...
Re: Subtotal with Table Node in smartforms
Go through these SAP Standard programs also,
sf_example_01
sf_example_02
sf_example_03.

TBIT40-45 Materials/PDF's at SAP sites

Where to get these TBIT40,41,42,43,44,45 training materials for XI certification in SAP sites?Please specify me the complete URL's, where i can get free of cost.

hello raju...
well for the overall overview of xi...
SAP XI - Where to Find Information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap xi - where to find information.pdf
All the information you need in XI :
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
To understand the architecture of XI, Please go through this link,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
You can also go through the url for Elearning :
https://www.sdn.sap.com/sdn/elearning.sdn
To read about System Landscape Directory (SLD), you can have a look at this link:
http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
Following is the link for 'how to guides', A step by step guide to create scenarios:
https://websmp201.sap-ag.de/nw-howtoguides
XI is all about configuration of Adapters, to learn more please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
How the messages are delivered through XI:
http://help.sap.com/saphelp_nw04/helpdata/en/17/50d440e14f8431e10000000a1550b0/frameset.htm
Also, this weblog provides you with FAQ in XI:
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.
For help on this scenario go through this blog it is in two parts thus I am providing both links below:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
and as ther r no direct materials available unless u register these wud help till then...
regards..
vishal

Convert scanned materials in PDF [was 1986Lorri]

I have purchased a subscription that allows me to convert scanned materials in PDF form to word documents. I converted a file. Then I do not know where it went or what to do to save it as a word document.

Hi 1986Lorri,
It sounds like you used ExportPDF to convert a PDF to a Word document. You can find your converted file (the Word document) by signing in to your account at cloud.acrobat.com. Click the Files tab, select the file that you want to download, and then click the Download File icon (to the left of the trash can).
Let us know how it goes!
Best,
Sara

I used Preview to fill in a .pdf form. I saved it, re-opened and saw my annotations. When I attached it to an email, the annotation and filled-in materials were no there. What's happening?

Having been gently chided by "How to write a good question," I offer additional information as a preamble to my question.
I am writing about Preview 7.0 (826.4) on Mavericks 10.9.4; my computer is a MacBook Pro, late 2011 model with not modifications.
I used Preview to fill in a .pdf form and saved it. To check, I re-opened the form and saw all the info I had filled in. However, when I attached it to an email, the info was not there; the form contained none of the info I had added. I re-did the form several times, but the results were the same when I attached it to email. What's going on?
Here's a secondary matter. When I filled in the form, the print was red and the type too large. Though I went into fonts, etc. and selected a type size and color black, the info I added was still red and the wrong size. Again, how do I manage color, size, and font?

Form document will automatically be saved after closing the file. As far as cloud message is concerned, it seems your Mobile link setting has been turned on. When you pressed device back button after filling the form, it was saved to your Acrobat.com account. You can access this document by going to Acrobat.com tab present in left pane. Its a cloud storage area where you can upload/save any document.
Thanks,
Adobe Reader Team

Help reqd for ABAP Materials(pdf/doc format)

Hi all,
I want to have the Basic ABAP material books,which is available in sites for free download....
Pls post ur replies with links.
thanks & regards
sankar.

hello sudarshan
http://cma.zdnet.com/book/abap/index.htm
http://www.sapdevelopment.co.uk/
http://www.sap-img.com/
http://juliet.stfx.ca/people/fac/infosys/abap.htm
http://help.sap.com/saphelp_46c/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/d6/0db357494511d182b70000e829fbfe/frameset.htm
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://www.sapgenie.com/abap/example_code.htm
http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
http://www.sap-img.com/abap-function.htm
http://www.sapgenie.com/abap/code/abap19.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.planetsap.com/Tips_and_Tricks.htm
http://help.sap.com/saphelp_40b/helpdata/ru/d6/0dc169494511d182b70000e829fbfe/applet.htm
http://www.henrikfrank.dk/abapexamples/SapScript/symbols.htm
http://www.henrikfrank.dk/abapexamples/index.html
http://sap.ittoolbox.com/documents/document.asp?i=752
http://members.aol.com/_ht_a/skarkada/sap/
http://sappoint.com/abap/
http://members.tripod.com/abap4/SAP_Functions.html
http://members.ozemail.com.au/~anmari/sap/index.html
http://www.planetsap.com/Userexit_List.htm
http://www.planetsap.com/Tips_and_Tricks.htm
http://www.kabai.com/abaps/q.htm
http://www.planetsap.com/Userexit_List.htm
http://help.sap.com/saphelp_bw21c/helpdata/en/c4/3a8090505211d189550000e829fbbd/frameset.htm
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/saphelp_45b/helpdata/en/65/897415dc4ad111950d0060b03c6b76/content.htm
http://www.sap-basis-abap.com/index.htm
http://help.sap.com/saphelp_40b/helpdata/en/fc/eb2c46358411d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/aa/aeb23789e95378e10000009b38f8cf/frameset.htm
http://www.geocities.com/ResearchTriangle/1635/system.html
http://www.sapdesignguild.org/resources/MiniSG/3_Managing/3_Functions_Table_Control.htm
http://help.sap.com/saphelp_45b/helpdata/en/d1/801bdf454211d189710000e8322d00/content.htm
http://www.sapfans.com/sapfans/repos/saprep.htm
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_util464/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
http://www.sapgenie.com/abap/smartforms_detail.htm
http://www.sap-img.com/abap.htm
http://help.sap.com/saphelp_46c/helpdata/en/fc/eb2d67358411d1829f0000e829fbfe/content.htm
http://www.geocities.com/victorav15/sapr3/abap.html
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://abap4.tripod.com/Other_Useful_Tips.html
http://help.sap.com/saphelp_45b/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
http://www.sap-basis-abap.com/sapmm.htm
http://sap.ittoolbox.com/nav/t.asp?t=303&p=448&h1=303&h2=322&h3=448
http://sapfans.com/
http://cma.zdnet.com/book/abap/ch03/ch03.htm
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
http://sappoint.com/abap/
http://www.henrikfrank.dk/abapuk.html
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://www.sapgenie.com/abap/index.htm
http://www.sap-img.com/abap.htm
http://www.sapdevelopment.co.uk/tips/tipshome.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
http://sap.ittoolbox.com/nav/t.asp?t=448&p=448&h1=448
http://www.thespot4sap.com/
http://www.kabai.com/abaps/q.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sapassist.com/code/d.asp?whichpage=1&pagesize=10&i=10&a=c&o=&t=&q=&qt=
For FAQ
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.sapgenie.com/faq/abap.htm
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
Weblog for receive email and processing it through ABAP
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
For Logical database
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
very useful
http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
Useful link to websites
http://www.hernangn.com.ar/sap.htm
Useful for background
http://www.sappoint.com/basis/bckprsng.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6f/08703713bf277ee10000009b38f8cf/frameset.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/index.jsp?topic=/com.ibm.wbix_adapters.doc/doc/mysap4/sap4x41.htm
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
For posting weblog,
/people/sap.user72/blog/2005/06/28/sdn-weblogs-making-it-easier
Dynamic Internal table -weblog in sdn
/people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table
Smartforms
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
ALV
http://www.geocities.com/mpioud/Abap_programs.html
Mail
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
BOM Explosion
/people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
BOM
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
OLE
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
ALVGRID with refresh
http://www.geocities.com/mpioud/Z_DEMO_ALV_REFRESH_BUTTON.html
For language setting and decimal separator
/people/horst.keller/blog/2004/11/16/abap-geek-7-150-babylonian-confusion
Oracle queries
http://sqlzoo.net/
To format SQL
http://www.sqlinform.com/
SCOT settings
http://www.sap-img.com/basis/basis-faq.htm
Status Icon [ALV,Table Control,Tab Strip]
http://www.sapdesignguild.org/resources/MiniSG-old/from_develop/norm_status_icons.htm#positioning_4
ALV Group Heading
http://www.sap-img.com/fu037.htm
For multiMedia
/people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
Uploading LOGO in SAP
http://www.sap-img.com/ts001.htm
LSMW
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
Here are the two links which contains lots of PDFS:
http://www.easymarketplace.de/online-pdfs-q-s.php
http://www.consolut.de/saphelp/sap_online_help.html
ABAP is Advanced Business Application Programming language used in SAP.
For more details and learning goto sdn ABAP home page -
https://www.sdn.sap.com/irj/sdn/developerareas/abap
http://help.sap.com/saphelp_webas630/helpdata/en/6f/c7b041548011d192fd0000e829fbc6/frameset.htm
http://help.sap.com/saphelp_webas630/helpdata/en/ab/5c46f64c5911d192f30000e829fbc6/frameset.htm
This will give clear idea about ABAP.

When sending email PO in a PDF attachment, the attachment can not be openen

Hi all,
We are trying to send an email with the PO in PDF format. We got the email but the attachment can not be opened.
Error reads: Adobe could not open test.pdf because it is either not a supported file type or because the file has been damaged (for example , it was send as a email attachemnet and was not correctly decoded).
Could any body bring some light?   We know that everything in SCOT is fine because we can email the PO through configuration to the vendor without problem. It is just these extra copies that do not work.
a) We are modifying our custom Print program to add the code below after closing the form.
in few words:
a) We are getting the OTF from closing the form.
b) Converting the OTF to PDF
c) Sending the PDF as attachment.
data: lt_docs      TYPE TABLE OF docs.
data: pdf_bytecount TYPE i.
data: begin of pdfout occurs 0,
   tline type tline,
end of pdfout.
Ende Formulardruck --------------------------------------------------*
CALL FUNCTION 'CLOSE_FORM'
       IMPORTING
            result = result
       tables
            otfdata = otf.
IF RESULT-TDSPOOLID NE SPACE.
    SPOOLID = RESULT-TDSPOOLID.
    PERFORM PROTOCOL_UPDATE USING '320' SPOOLID SPACE SPACE SPACE.
ENDIF.
if result-userexit eq 'C' or
      result-userexit eq 'E'.
    retco = '9'.
endif.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
    IMPORTING
      bin_filesize           = pdf_bytecount
    TABLES
      otf                    = otf
      doctab_archive         = lt_docs
      lines                  = pdfout
    EXCEPTIONS
      err_conv_not_possible = 1
      err_otf_mc_noendmarker = 2
      OTHERS                 = 3.
Creation of the document to be sent File Name
   maildata-obj_name = 'TEST'.
Mail Subject
   maildata-obj_descr = 'Subject'.
Mail Contents
   append mailtxt.
describe table mailtxt lines tab_lines.
read table mailtxt index tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
clear mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
append mailpack.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
Move pdf code to structure soli form email
clear solisti1. refresh solisti1.
loop at pdfout.
    solisti1-line = pdfout.
    append solisti1.
endloop.
loop at solisti1.
     move-corresponding solisti1 to mailbin.
     append mailbin.
endloop.
describe table mailbin lines tab_lines.
mailhead = 'TEST.OTF'.
mailhead = 'TEST.PDF'.
append mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-doc_type = 'PDF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
append mailpack.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
          EXPORTING
               DOCUMENT_DATA              = maildata
          TABLES
               PACKING_LIST               = mailpack
               OBJECT_HEADER              = mailhead
               CONTENTS_TXT               = mailtxt
               RECEIVERS                  = mailrec
          EXCEPTIONS
               TOO_MANY_RECEIVERS         = 1
               DOCUMENT_NOT_SENT          = 2
               DOCUMENT_TYPE_NOT_EXIST    = 3
               OPERATION_NO_AUTHORIZATION = 4
               PARAMETER_ERROR            = 5
               X_ERROR                    = 6
               ENQUEUE_ERROR              = 7
               OTHERS                     = 8.
ENDFORM.

Dear Monica,
You need to configure the system with respect to functional point of view and need to write the following code in print program. i have done this and solution is as follows.
<b> Reward me for this solution.</b>
Process 11 (MM)     Sending RFQs and POs to vendors directly from the system instead of sending thru Courier or Fax
Existing Process (AS-IS)     Presently system is not supporting this requirement
Business Requirements     RFQs to be linked with vendor master with e-mail to send enquiries directly through system instead of courier/fax. Vice versa P.Os. Specifications, drawings should also go to vendor along with mail.
To-Be
Configuration Settings:
1) Spro Materials management Purchasing Messages Output control Message types Define message types for RFQ/ PO
     Created ZEK1,ZMI and ZEK2 for RFQs
     Created ZIK,ZOC,ZOK,ZOM,ZSI, ZSK2 and ZSM for Pos
     The above New output types Included with existing Print Forms and Programs but modified with External send(5) medium, and added companys letter head thru ABAP developments (details provided below)
     The above new output types also maintained for Fine- tuned control (thru same navigation) for New(1) and Change(2) operations
      2) Spro Materials management Purchasing Messages Output control Message   determination schemas Define message schema for RFQ/ PO
     Maintained the new output types in the control data
3)     Maintain Condition records for the New out put types (copied same document types from the existing old output types)
Easy access Logistics Materials management Purchasing Master data Messages MN01 (for RFQs)/ MN04 (for Pos)
4)     Maintain Email id of Vendor in Vendor master.
Developments (ABAP):
1) Copied the existing print programs and forms of the corresponding out types.
2) Addition of header window in each corresponding form (HEADER window). Uploaded the HEADER3 graphics in the header window.
INCLUDE HEADER3 OBJECT GRAPHICS ID BCOL LANGUAGE EN
3) Added the the following code in TOP includes
                   TYPE-POOLs szadr.
           INCLUDE: LMEDRUCKF09.
data: intnast         LIKE snast,
      lvs_recipient   LIKE swotobjid,       "Internet
      lvs_sender      LIKE swotobjid,       "Internet
      lvs_comm_type   TYPE ad_comm,
      lvs_comm_values TYPE szadr_comm_values,
      p_retco         TYPE i.
5)     Addition of the perform to SOS include for header window display
       PERFORM WRITE_FORM_HEADER.
*&      Form WRITE_FORM_HEADER
      text
--> p1        text
<-- p2        text
FORM WRITE_FORM_HEADER.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'HE1'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'HEADER'
IMPORTING
   PENDING_LINES                  =
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
ENDFORM.
6)     In the corresponding FORM include the following code has been added.
DATA: lvs_comm_type     TYPE   ad_comm,
        lvs_comm_values   TYPE   szadr_comm_values,
        xprogramm         type   sy-repid.
... use stratagy to get communication type
      CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
           EXPORTING
                strategy           = nast-tcode
                address_number     = lfa1-adrnr
           IMPORTING
                comm_type          = lvs_comm_type
                comm_values        = lvs_comm_values
           EXCEPTIONS
                address_not_exist = 1
                person_not_exist   = 2
                no_comm_type_found = 3
                internal_error     = 4
                parameter_error    = 5
                OTHERS             = 6.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
convert communication data
      MOVE-CORRESPONDING nast TO intnast.
      MOVE sy-repid           TO xprogramm.
7) By using the function module we can get sender and reciepient mail ids to variables lvs_recipient    lvs_sender
      CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
           EXPORTING
                pi_comm_type              = lvs_comm_type
                pi_comm_values            = lvs_comm_values
                pi_country                = lfa1-land1
                pi_repid                  = xprogramm
                pi_snast                  = intnast
           IMPORTING
                pe_itcpo                  = itcpo
                pe_device                 = xdevice
                pe_mail_recipient         = lvs_recipient
                pe_mail_sender            = lvs_sender
           EXCEPTIONS
                comm_type_not_supported   = 1
                recipient_creation_failed = 2
                sender_creation_failed    = 3
                OTHERS                    = 4.
      IF sy-subrc <> 0.
      Avoids cancellation with message TD421
        p_retco = '1'.                                           "831984
        PERFORM protocol_update USING '740' space space space space.
      dummy message to make the message appear in the where-used list
        IF 1 = 2.
          MESSAGE S740(me).
        ENDIF.
        EXIT.
      ENDIF.
      IF xdevice = 'MAIL'.                                       "885787
    Check validity of email address to avoid cancellation with TD463
        CALL FUNCTION 'SX_ADDRESS_TO_DEVTYPE'                    "831984
          EXPORTING
            recipient_id            = lvs_recipient
            sender_id               = lvs_sender
          EXCEPTIONS
            err_invalid_route       = 1
            err_system              = 2
            OTHERS                  = 3.
        IF SY-SUBRC <> 0.
          p_retco = '1'.
          PERFORM protocol_update USING '740' space space space space.
       dummy message to make the message appear in the where-used list
          IF 1 = 2.
            MESSAGE S740(me).
          ENDIF.
          EXIT.
        ENDIF.
      ENDIF.
8)     Attaching the new print program and form in NACE transaction.
Steps for End user:
1)     Creating the Purchase Order or RFQ with suitable document type through ME21N or ME41 .
2)     Executing the transaction ME9F and in selecting the suitable output type.
3)     Executing the transaction ZSEND_PDOC using INT as input.
4) With above steps we can able to send purchase order or RFQ to vendor as an attachment through e-mail in PDF format.
Regards
Badari

Can not save PDF as Postscript

After installing Acrobat 8 on a MAC Pro Intel OSX 10.4.10 I can not use the Print dialog and selecting PDF Save as Postscript. I keep geting the message, Saving A PDF when printing is not supported. This does not occur on a MAC G5 running OSX 10.4.10 only on my Intel MAC's.
Anyone with Ideas?

We own the rights to our product and license companies around the world to manufacture, promote and sell our products through this license. We create the marketing tools for these companies to use to promote and sell this product. Unfortunately, everyone downloads our materials and places them on their websites and then never looks at it again, so our materials on their sites are never the most current version. It would be so much easier to control the materials if people we not taking from our site but just linking to the document. They would open the same whether on their site or mine, but you get tired of explaining that. All they hear is their web designers telling them that if you do that your sending your customers away from your site - blah blah blah Unfortunately, even tho I inform them they have to do it this way, I can not make changes to their site and was looking for a work around.

XI pdf materials

Similar Messages

Maybe you are looking for