XI/PI: Integration Repository- copy object options meaning?

Hi All,
When we copy objects within IR we get follwing two options,
1. With all dependents objects
2. Save original as reference
can anyone tell me implications of chosing these options?
why and when should we chose them?
Thanks and Regards,
Ujwal

>>1. With all dependents objects
When u copy Mesage Type, it's dependent object Data type is also copied.. similarly Interface Mapping will copy Message Mapping also.. this is applicable for all IR obects that are dependent...
>>2. Save original as reference
The copied obects that are there in the new Namespace will refer to it's dependen't objects that is there in the original/initial namespace...
>>can anyone tell me implications of chosing these options?
>>why and when should we chose them?
depend's... if the initial/original namespace are not going to be moved to other box and only the new namespace is to be moved then even the dependent objects should be copied to the new namespace....
~SaNv...

Similar Messages

Issue loading Meta Data for IDoc Type WPUKSR01 in XI Integration Repository

Hi,
I want to load the Meta Data for IDoc Type WPUKSR01 in XI Integration Repository out of BI. Unfortunately, this IDoc is not available in the IDoc List. I checked in BI and the IDoc Type is available in WE60 and WE30. Also, I can load the Meta Data for the Idoc in XI ABAP (IDX2).
Can someone tell me why the IDoc doesn't show up in XI Integration Repository Import Object List?
Thanks in advance.
Best Regards.
Alex

Hi Aamir,
The Idoc is released since Release 30A. I also tried to load the IDoc Meta Data from ERP with the same result: it does not show up in the list.
Thanks anyway.
Alex

Renaming Integration Repository objects?

Hello everybody,
is there any way to rename already created integration repository objects (e.g. integration scenarios)? There are some distinct naming conventions for some of the SAP certification programs and some of the content already developed does not adhere to those conventions.
Thanks for your answers!
Regards
Jörg Strebel

The renaming is not given as an option, mainly because of the dependcies that are involved. If renamed, the object dependencies are very difficult to manage.
1) Copy the objects to new names.
2) Change the dependencies from bottom up, to point to the new names. Data Types first, then Message Types, then Interfaces, then Mappings etc.
3) Delete the objects with old names.
4) Activate the changes.
Hope this helps,
Bhanu

Import of SAP Objects into Integration Repository in XI 3.0

Hi all,
I am not able to import SAP objects into the Integration Repository in XI 3.0. This option is under any Software Component Version. I have selected the radio button "Import of RFC and IDoc interfaces from SAP systems permitted", in the Software Component Version settings. After the connection data is specified for the SAP system nothing appears under the IDoc, Whereas the import of RFCs is successfull.
We also have another installation of SAP XI 3.0, here this option is working properly. Can anyone tell me what is the problem, is is there something else to be configured inorder to do this.
Best regards,
Norway

Hi Stephan
Thank you for your answer. We have followed your instructions but did only get half a success. Here is what we have done:
1) Created "External Definitions" for all related xsd-files with the same name as the xsd-filename and in our own namespace. Our namespace is different from those specified in the xsd-files. We have not change the namespaces in the xsd-files.
2) Maintained the "source"-field with the name for the xsd-file and not the url as specified in our answer. When we used the filename only we got a value the field "name" in the "External References".
3) We made a message mapping and imported the "top-level-xsd-element" from the "External Definition". This resulted in only the top level element and nothing else. What we expected was the possibility to drill down through the complete structure.
What did we doe wrong? Perhaps I could talk you into spending 10 min. and try it your self? This url leads to a zip file with all the related xsd files: http://rep.oio.dk/ubl/xml/schemas/0p71/documentation/resources.html
Do you know if it will be possible to make references across namespaces in a later version of XI?
Regards
Christian

How to delete object in Integration Repository SAP PI 7.0

how to delete object in Integration Repository SAP PI 7.0

Hi Rashmi,
Right click on the object, you would find the option to delete--> select it. Goto Changelist Tab and activate the changes.
Ref: /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Re: How to delete/remove the software component from integration repository
Thanks,

Integration Repository objects

Is it possible to store Integration Repository objects (Data Types,Message Types,Message Interfaces,Message Mappings and Interface Mappings) separately in the repository like (VSS ,CVS etc,.).Some times it will be helpful to merge specific versions of the objects and activate.If i am not wrong i can only see exporting IR objects as a whole and store in the repository.

Hi Anand,
I dont have a exct answer for it but i can give you a solution.....
the thing is you can export your datatype as XSD and save that XSD at your coninient path.....so once your are in need of datatype you just import that XSD so you can see your datatype there..............so once you have your datatype i dont think it will take much of time to build IR Objects other than Mapping....this too can be solve if you use Java or XSLT Mapping...just have a copy of your pgm in local so that you can make use of it wherever you want ....hope this simplifies your task...f you feel im wrong kindly inform me...
Cheers,
Sundararamaprasad

Integration Repository objects for EDI adapters

Hi,
We are currently evaluating EDI integration options, and I need some information.
Does anybody know where I can find a list of Integration Repository (or any other) objects such as mappings, mapping templates, msg types, etc that are provided with the EDI adapters from Seeburger or iWay ?
If you know where I could get my hands on some technical documentation of the adapters themselves, that would be great too!
Thanks and Regards
Manish

hi,
>>>>Does anybody know where I can find a list of Integration Repository (or any other) objects such as mappings, mapping templates, msg types, etc that are provided with the EDI adapters from Seeburger or iWay ?
you get them if you buy the adapter
>>>If you know where I could get my hands on some technical documentation of the adapters themselves, that would be great too!
I have one presentation about the seeburger
if you want check my e-mail in my business card
and send me an e-mail
I'll send you this presentation back
Regards,
michal

How to UnLock the object in Integration Repository of XI.

Hi Experts, when i try to edit the object in IR, i am getting following message.
Object Message Mapping EmpResponce_MM | urn:pas.com/neh currently being edited by user 9SGRANDHI.
Note: it is saying my ID itself, i logged off and logged in, still its showing same mesage, how to unlock the object in Integration Repository of XI.
please help me out.
thanks
siva

Hi,
Go to Home page of XI,there u will have Administrator,select it and click on localobjects.There u will have IR and ID in that select lockoverview and remove ur lock.
this authorization will be given to basis guys check u have it or not.
Regards,
Phani
Reward points if helpful

I intermittently cannot option+drag shapes, or even drag a copied object. Instead Illustrator will try to enact re-sizing or rotation.

This is so frustrating, having never had this issue in any prior versions of illustrator.
I'm using Illustrator CC, on a Macbook Pro Retina (newest), on OSX 10.10.2 ... using the trackpad for now in lieu of my tablet or mouse (suspecting that this might be the issue).
As I said in the title, very frequently, I'll go to option+drag an object to copy it and instead of it dragging out a new copy, it tries to either rotate or stretch the object instead. This is in every different file I try to work on. I'll try to do it the old fashioned way of cmd+C, cmd+F and then dragging it, but this too seems to run into the same issue. Dragging the newly copied object instead enacts rotation or stretch tools.
I'm sure you can appreciate how maddening this can be if you're accustomed to quickly multiplying lots of little objects on screen.
Thanks!

jomo,
We have had a few similar threads recently, active at the same time:
Re: Illustrator thinks I want to resize an object...
I have issues while trying to drag/alt+drag a relatively small odject.

Objects arrangement in Integration Repository

Hi All,
I have some questions about Objects Arrangement in Integration Repository.
Lets say that the scenario is as follow :
I have two on going projects. There are data exchanges in both projects.
In Project_1, R/3 needs to get data from CRM system,
while in Project_2, R/3 needs to get data from SEM system.
How should I arrange the objects in Integration Repository using the most common way (best practice) ?
(For example, is it supposed to be like this
Model A :
Product : MYCOMP_R/3
SWC : MYCOMP_R/3
NameSpace : http://mycompany.com/R3/Project_1
          (Here we put all the R/3 related Objects of Project_1)
               http://mycompany.com/R3/Project_2
          (Here we put all the R/3 related Objects of Project_2)
Product : MYCOMP_CRM
SWC : MYCOMP_CRM
NameSpace : http://mycompany.com/CRM/Project_1
                       (Here we put all the CRM related Objects of Project_1)
Product : MYCOMP_SEM
SWC : MYCOMP_SEM
NameSpace : http://mycompany.com/SEM/Project_2
                       (Here we put all the SEM related Objects of Project_2)
or like this ?
Model B :
Product : PROJECT_1
SWC : PROJECT_1
NameSpace : http://mycompany.com/proj1/R3
               (Here we put all the R/3 related Objects of Project_1)
               http://mycompany.com/proj1/CRM
               (Here we put all the CRM related Objects of Project_1)
Product : PROJECT_2
SWC : PROJECT_2
NameSpace : http://mycompany.com/proj2/R3
               (Here we put all the R/3 related Objects of Project_2)
               http://mycompany.com/proj2/SEM
               (Here we put all the SEM related Objects of Project_2)
Please advise me
Thanks in advance,
Andy S

Hi,
1. You have a choice of making one SWCV per project in a company or per Thrid-party project.
2. You can have one SWCV and then have one namespace for each Interface you are developing itrrespective of the sender or reciever system.
3. If you have one SWCV for each Third-party product then you have to again design as to where different object should be , Sender system or reciver system.
4. If you keep all the object pertaining to one Interface together under a namespace the readability increases.
Hope this helps.
Regards
Vijaya

Objects locked after crash in Integration Repository (Design)

Hi there,
Unfortunately the integration repository (Design) crashed during an import of some IDOCS from a R3 system.
Now when I try to login again into the Integration Repository and do any changes in the software component, I get a warning telling me that the object Im trying to edit is currently beig edited by my own account.
How can I remove this object lock so I can continue working with this object? is there any admin tool from where I can release the locked objects or something like that?
Thanks Rob.

Hi Rob
I presume you use XI 2.0.
Execute transaction sm12 to release the locks.
Regards
Venu

Automatic deletion of temp files and Disabling copy to option of originals in DMS

Dear DMS Experts,
I have 3 requirements, I have searched the net ,but I am still clueless as to how to do it.
1) The temporary files created in C;\temp ( or the path we have given in dc20 ) has to be deleted after viewing the documents because of security reasons.
I heard about enabling the OLE2 option in table TDWX, but I am not sure .
2) The 'copy to' option of originals has to be disabled in display mode ( CV03N ). Adding further, the 'save as' and 'print option' for MS Office applications ( word, excel ) has to be disabled due to security reasons( I tried with both office integration and %AUTO% )
3) In product browser view ( using folder structure in CV01N ), I need the users to have 'delete link as ' option disabled as they are not supposed to delete the folders created by admin ( Deleting means deleting from the structure and not from the system) . For this, I have given authorization object for bill of materials for the users and disabled 'delete' checkbox as well as 'Delete from database' checkbox . But still, I am able to delete the folders from the structure.
Any help would be appreciated.
Thanks in advance.
Regards,
Aravind

Hi Chandu,
I am still in the dark regarding Q2 and Q3 . Regarding Q2, I tried disabling the check out options and also try opening it in SAP Script or smartform by populating the entries in the originals to the smartform. But still download option is possible. Hence I have raised to SAP service market place.
Regarding Q3 , I am trying to use custom authorization object .
Regards,
Aravind

Users not able to create new ojects in Integration Repository

Hi,
    We did a heterogeneous copy of PI from AIX to HPUX. After that we have done few post installation steps w.r.to PI Specific usage type.
    all the developers are able to login to the integration repository, but when they are trying to "Edit" or "Create" new objects they are getting the following error
"You are not permitted to create new objects since the software component cannot be changed".
   this is working with PISUPER user but not with any development user id and passwd.
    any response is higly appreciated.
Thanks
Sourav

Hey NM,
    Thanks a lot for your suggestion. problem got resolved when i did what you said (checking the attributes with developers user id's)
Thanks
Sourav

Integration directory - Editing Objects

Hi all,
I want to change the naming convention of some objects like configuration scenario name,party name,business service name etc in the Integration directory.
For Eg:- If I try to change the configuration scenario name.
DblClick the "Configuration scenario name"
But when I try to change it by using "Display/Edit"- the "Configuration Scenario" field is not editable.
The "Description" field is editable.
Is it something to do with my rights in the system.Should I talk to my administrator.
OR
If not, How could I change it...
Thanks
P

So if there are 2 party or business servives or integration processes with the same name(added as I aid before using "Add to Scenario") exists in 2 different scenarios.They are independent objects.
So I can rename each object also as independent objects as follows,without worrying abt "Where-used"lists.
Right click ->Copy object->Give the new name->Select the scenario(and folder if you using one)->Save and activate.
A li'l correction here. You cant have two different business services/components with same name in the first place. All Business sytems/services are stored in a common place thats under the Service without party tab in Integration Directory.
Channels assigned to Business system is stored in SLD.Thats clear.
Channels assigned to business services.Its also reused.If it is reused it should be stored in a common place right.Where is it?
When you create a channel BY DEFAULT they get stored in Communication Channel tab in ID and if you check the Service without party tab in ID you can find the same under your business service/component.
So if there exists 2 channels with the same name(added as I aid before using "Add to Scenario") exists in 2 different scenarios.They are independent objects.
So I can rename each channel also as independent objects as follows,without worrying abt "Where-used"lists.
Yes!!!
Your channels are assigned to a particular business system/service. Now when you rename them using copy object you have the option to select a business system too. If you want them to be in the same business system/component just give the new name and save.No need to worry about scenarios.

Authorization Error in Integration Repository

Hi,
I have authorization issues with Integration Repository(IR) in XI 7.0 Server. While logging into IR, i use the PISUPER id which works fine. But if i use other id it throws authorization error.
I am using client 710 and have created an id with relevant roles to login to IR which failed. Then i created same id on 001 client and could logon to IR with that id. This means that while logging into IR, it points to 001 client and not 710 that i am using. Thus i need to use 2 different ids: one for IR that points 001 client and other for logging into SAP system on 710 client.
I referred the below thread which tells the same.
Authorization Error
Can someone explain me about this.
Also can i use the same id for logging to IR and SAP system?
Regards,
Chintan Sheth

Hi,
Thanks for replying.
Yes i know that users and roles are client dependent. But my problem is different.
I hav created a new client 710 which is copy of 001 client and also performed the post steps as per SAP Note 940309.
The problem i face is while logging to Integration Repository. I have id PISUPER on both the clients 001 and 710. But for logging to IR it accepts the logon credentials of 001 client and not of client 710. I understood this when i changed the password of PISUPER on client 710.
As per my knowledge, for logging to IR it should use the user master record of client 710.
Kindly help me on this.
Regards,
Chintan Sheth

XI/PI: Integration Repository- copy object options meaning?

Similar Messages

Maybe you are looking for