XI / PI Monitoring checks

Hello,
Are there any XI/PI specific checks for monitoring ?
I mean are there any T codes, or checks through the J2EE portal.
Kindly guide me
Thank you, Regards,
Girish Garje

Hi Girish,
Please specify what type of monitoring you are telling about, if it is performance monitoring or CCMS monitoring then we can use these tcodes-
SM66- process executing on every application Servers, batch jobs in SAP
ST03N- for workload monitor.
ST06- OS monitor
SMLG- SAP logon load balancing
SSAA- System admin checking
RZ20 -CCMS
for XI
SXMB_MONI- IE monitoring
SXI_MONITOR- monitoring for processed XML messages
for message in adapter we have adapter log in RWB.
to monitor the users logged on entire system module wise use ST07 or use sm04
Thanks
Sugata B

Similar Messages

NT 의 PERFORMANCE MONITOR 를 CHECK 하기

제품 : ORACLE SERVER
작성날짜 : 2003-11-27
NT 의 PERFORMANCE MONITOR 를 CHECK 하기
=======================================
PURPOSE
NT의 performance MONITOR에서 ORACLE PERFORMANCE를 CHECK 하는
방법을 알아보자.
Explanation
NT 의 performance 에서 oracle 의 performance 도 check 가 가능하다.
이의 설정은 다음과 같다.
HKEY_LOCAL_MACHINE > SYSTEM >currentControlSet > Services >
Oracle7 >performance
Hostname ='2:ORCL'
username='SYSTEM’
password='MANAGER’
만일 이를 setting 하였는데도 performance monitor 의 check 가
불가능한 경우 다음의 실행 file 을 실행하여야 한다.
lodctr %ORACLE_HOME%\dbs\opctrnm.ini - for Oracle7
lodctr %ORACLE_HOME%\dbs\opctrn80.ini - for Oracle8
이의 check 로 다음을 check 할 수 있다.
CPU time /memory bottleneck
Memory pages input/sec
Memory pages output/sec
Memory pages faults/sec
Memory pages pages/sec
Percentage Processor time
Percentage Privileged Time
Percentage user time
Reference Documents
--------------------

제품 : ORACLE SERVER
작성날짜 : 2003-11-27
NT 의 PERFORMANCE MONITOR 를 CHECK 하기
=======================================
PURPOSE
NT의 performance MONITOR에서 ORACLE PERFORMANCE를 CHECK 하는
방법을 알아보자.
Explanation
NT 의 performance 에서 oracle 의 performance 도 check 가 가능하다.
이의 설정은 다음과 같다.
HKEY_LOCAL_MACHINE > SYSTEM >currentControlSet > Services >
Oracle7 >performance
Hostname ='2:ORCL'
username='SYSTEM’
password='MANAGER’
만일 이를 setting 하였는데도 performance monitor 의 check 가
불가능한 경우 다음의 실행 file 을 실행하여야 한다.
lodctr %ORACLE_HOME%\dbs\opctrnm.ini - for Oracle7
lodctr %ORACLE_HOME%\dbs\opctrn80.ini - for Oracle8
이의 check 로 다음을 check 할 수 있다.
CPU time /memory bottleneck
Memory pages input/sec
Memory pages output/sec
Memory pages faults/sec
Memory pages pages/sec
Percentage Processor time
Percentage Privileged Time
Percentage user time
Reference Documents
--------------------

Health monitor check

Hello
is health monitor check licensed featured in 11g
running these packages DBMS_HM.run_check would it incur license costs
Data Block Integrity
Undo Segment Integrity
Db Structure Integrity
Redo Integrity check
thanx

is health monitor check licensed featured in 11g With Oracle Database 11g, the health check package is now free
Please see [Doc id 466920.1|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=466920.1]
- Wilson
www.michaelwilsondba.info

Monitoring "check aborted jobs" not possible - Logical component issue?

Hy Experts,
we are facing a problem setting up system monitoring in our Solution Manger system.
We want to check if a specified job is finished sucessfully - if it is aborted we want to receive a mail.
In another system the monitoring as described is fully functional.
In this scenario we are facing a problem:
Error Text:
The logical components SAP NW REDWOOD CRONACLE and Z_SYS_MONI have different products
Message no. SOLAR170
Diagnosis
This component change can prevent the processes and scenarios which you have copied from the BPR into the "Structure" tab, in transaction SOLAR01, from running in the assigned system, or assigned transactions, IMG activities, etc. may not exist in these systems. For example, transactions or IMG assignments copied into the previous product context do not yet exist in the project.
If the same systems are assigned to the new and old logical components, the change is not critical.
System Response
The system sends a warning and accepts the change, but no data is automatically converted or adjusted.
Procedure
If you are unsure whether your assignments will still be in the component systems after the component change, perform the function "Environment - Refresh Buffer" in the transaction SOLAR01. Errors in this program are objects which do not exist in the system.
Actual product of the logical component "Z_SYS_MONI" is ECC5.0.
The other (working) is using the logical component "SAP NETWEAVER APPLICATION SERV" instead of the above used "SAP NW REDWOOD CRONACLE "
How can this error be fixed OR
How to monitor jobs with logical component ecc5.0?
Any help will be rewarded!!!
Thanks in advance
Tom

Detailed Info:
The working solution is assigned to ECC 6.0 AND to SAP Netweaver 7.0 (2004s).
The selection in business process repository - it-platform - monitoring is assigned to SAP Netweaver 7.0. - but we have ECC5.0 - even if I create the system/logical component new under Netweaver 2004 (6.40) it won't work
It seems not to be possible.
But how to monitor a job in ECC5.0 - think it is possible.
Any ideas?
Please help!
OK
Seems not to be possible!
Set to solved - but this is not the way to solve problems dear SAP
Edited by: Tom on Dec 5, 2008 9:59 AM

Samsung monitor/"check signal cable" msg

Been using this monitor for about a year and a half, connecting it to my Mac Mini with a Mini Display Port to VGA adapter. All of a sudden, I get the "check signal cable" message. I replaced the VGA cable; no luck. Then I replaced the adapter; still no luck. The Mini runs fine; I can access it over my network using my laptop. Anybody got any suggestions? Thanks.
Ellen

Reset the SMC > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
and then the NVRAM / PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then it doesn't work, test the monitor with another computer and/or test another monitor with the Mac Mini.

SAP Monitoring - check Posted: Feb 20, 2012 2:05 PM

Dear Specialists,
I need to make a list for customer with everything that is monitored on their SAP systems.
I managed to get it on OS Level, oracle monitoring, tablespaces, processes, FS, and so on.
But how can I check what is being monitored on SAP level ?
Thanks in advance,
Daniel

Hi,
I believe that your question is how to monitoring SAP systems.
A good point to start is the RZ20. You do find there a lot of MTEs to monitor the SAP and also the Operating System.
Take a look at this link:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/6001d5c9-36cb-2a10-4f82-ffc5b4481053
Try to find in the SAP help about CCMS.
Clébio

SAP Monitoring - check

Dear Specialists,
I need to make a list for customer with everything that is monitored on their SAP systems.
I managed to get it on OS Level, oracle monitoring, tablespaces, processes, FS, and so on.
But how can I check what is being monitored on SAP level ?
Thanks in advance,
Daniel

Dear Daniel,
Please post this question on appopriate forum - Netweaver - general
Thank you,
Regards,
Michal Krawczyk

How often do log monitors check log files?

Hello all, just wondering if there was a set interval that SCOM checks log files when you set up a simple log monitor. Is there an interval somewhere I'm not seeing? Or how does that work?

Please see: https://social.technet.microsoft.com/Forums/systemcenter/en-US/ee74e8b6-623a-41ee-abb4-54a98d017000/scom-2012-polling-interval-faster-for-monitoring-network
But not every param of monitor can be changed and it can be hardcoded in MP...and only way to change this param is to recreate MP ..
usually Param Interval (sec) or Frequency is
used to modify that property (polling interval) in overrides."
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Monitor/Check the logs of KM Jobs

Hi Experts,
I have created a Job under KM at this path
Configuration -->
Content Management -->
Global Services -->
Scheduler Tasks -->
and scheduled at 05MinutesAfterFullHour,10MinutesAfterFullHour. But I don't see job running after the scheduled time.
Can anyone tell me where can we monitor the logs of the scheduled job.
Thanks in Advance,
Chinna.

I could found them in http://<server>:<port>/nwa

Check Release Monitoring in SAP B1 8.8

Hi Experts,
Is there a standard functionality in SAP to monitor check releasing? TIA.

Hi bryanv,
Go to Banking / Incoming Payment / Check Register For Incoming Cheque
Go to Banking / Banking Reports / Check Register Report For Outgoing Cheque
Thanks,
Srujal Patel

SQL Management Pack Agent Job Unit Monitors

I am trying to utilize the SQL Agent Job Monitors included with the SQL Management Pack (page 81 of the MP guide), particularly the "Last Run Status" monitor. I have set an Override for "Generate Alerts" to True. The goal
is to have an email notification sent when any SQL Agent job fails on a specific group of computers. However, I am not familiar enough with what "Last Run Status" is actually monitoring and if it will do what I am looking for. Does this monitor
check the job status of any agent job on the target group? I tried setting up a job for it to fail, which it does fail, but it does not generate an alert. Any suggestions appreciated. Thanks.

1) For monitoring SQL server job status, you can refer to the following blog
http://blogs.technet.com/b/kevinholman/archive/2011/08/05/how-to-monitor-sql-agent-jobs-using-the-sql-management-pack-and-opsmgr.aspx
2) For troubleshoot: Make sure that your SQL agent job is discovered, you may find the discovered job under Microsoft SQL Server --> SQL Agent --> SQL agent job status. By default, the discovery is disabled and you should enabled the discovery by using
override.
Roger
Thanks. So I enabled Agent Job discovery for the systems that I want. It discovered those objects. Now, I still cannot get the alerting to work. I can see the Health State of the job change to a Warning, indicating "Last Run Status" equals Failed, but
it is not generating an alert. I set Overrides (Generates Alert = True) on a Group that included one of the job objects, nothing. I also set the same Override directly on the job object and I still do not receive an alert. Any ideas? I
noticed someone in the comments mentioned in the blog you linked, a similar issue, except with the Job Duration monitor. However, he was able to get alerts to generate by setting the Override directly on the Job object and noted that it is not a
feasible solution due to the number of jobs he wants to monitor. Again, I tried the same, but still could not get alerts. That solution would not be acceptable for me either because of the number of jobs that I would have to set individual Overrides for.

Short dump while running Alert Monitor

Hi,
I am getting a short dump while determining alert in Alert Monitor through T. Code /SAPAPO/AMON1. The error says as below:
Runtime Errors BCD_NO_SIGN
Short text : A packed number contains no sign.
What happened? : Error in the ABAP Application Program, The current ABAP program "SAPLKKBL" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Information on where terminated : Termination occurred in the ABAP program "SAPLKKBL" - in "FB_OUTTAB_SORT2".

Hi Axon Generic,
Please checkon the following
1) In the overall profile of alert monitor, check the relative
time interval whether specified correctly
2) Under the alert profile in Overall profile, check the
threshold values are defined correctly
3) Check the SAP Note 151709 , 189061
Please confirm your findings.
Regards
R. Senthil Mareeswaran.

DVI second monitor stopped working. Stuck in "Power Save Mode"

I have a HPE-110f Desktop PC. Monitor does not respond to all manners of troubleshoot e.g. update SW, disconnect reconnect. power save to "never" settings. Monitor checked on VGA and works fine. Status of Video Card infers working. Considering DVI adapter to VGA as stopgap to buying new Graphics card. Not a gamer but considering upgrade(s) to Radeon HD 4350 w/ P/S upgrade as well. Help. Prefer cheaper existing equipment fix.

Try connecting them all one at a time first and make sure each monitor functions as it should when it is the only monitor being used. Then try connecting the other monitors one at a time and changing the extending display settings. This is to see if there is a point in the process where it fails. Also, it could reset the settings to get it working again.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

[openbox] External monitor setup

Hi guys,
I'm curious to know how you handle a second monitor. Coming from Gnome I was used to have some more comfort with that.
How it should be
1. I plug in the monitor and nothing happens automatically. Can this be done automatically?
2. Anyway, not a problem, I can use arandr to activate the external monitor. But how can I for example map the second desktop of openbox to that screen? That is, the first desktop should be mapped to my laptop screen, the second to the external monitor.
3. When I plug off the external monitor all previous settings should be restored, showing all my windows on only my laptop screen.
Regards

orschiro wrote:1. The list of windows opened through ALT+TAB is only visible on the second screen. However I want it to have on my laptop screen.
You should be able to fix this with the "<monitor>" option in the "<placement>" section. If you want the ALT+TAB dialog on the active screen, use "<monitor>Active</monitor>". If you always want it on one particular screen, try a specific number. (If "<monitor>1</monitor>" does not work, try "<monitor>2</monitor>".)
orschiro wrote:2. I'm using adeskbar as a panel bar. Does anyone know how to restrict the size of the bar only to the left/laptop screen?
I'm not familiar with adeskbar, but it is certainly possible that adeskbar does not support multi-head setups.
orschiro wrote:3. Viewing flash video in fullscreen over the second monitor does not cover the whole screen but only the resolution of my native screen (1280x800 px). How can I run flash files in fullscreen (it's a monitor with ~1600 x... px) over the second screen?
I found this and this.
Otherwise, I get this problem too. It seems like some people believe it's a problem with the player or flash itself rather than the window manager. (Think about it---the window manager isn't going to choose the resolution at which flash displays video.) I've simply resigned to live with it and watch full screen flash on the monitor that it shows correctly on.
Also, since you're using Openbox with multiple monitors, check out Openbox Multihead.

How do I add a monitor dedicated to program monitor

I have a large high def program monitor I used to use with Media 100. Is there a way I can use that to monitor the Premiere Pro desktop program monitor full time (rather than going to full screen and back to "normal?" Mac Pro. 10.8.5 Premiere Pro. Must be a way but can't find it in the manual? (Just made the switch from Media 100 Suite to Premiere pro and finding my way. Great program!)
Many thanks.
Ben Strasser

My set up is exactly like that ( but on a PC Windows) Nvidia Card CC2014xx ( but this has worked since CS5 at least)
Application GUI all on one monitor ..second monitor is full screen HD ( that reflects the Program Monitor in the GUI). No Menu bar or navigation controls on this monitor.
FWIW - I use the Default Edit Workspace .
I just have my graphics card set up (Nvidia Driver) in Windows to acknowledge two Monitors identified as 1 and 2 (note both monitors are HD Monitors so no scaling involved)
In Premiere Preferences> Playback I simply select the Monitors (check boxes) especially Monitor #2
That's it.
Note . I do not drag application panes anywhere out of Default Workspaces. It is saved a s a Custom Workspace though.
This setup always plays out a full screen Monitor on #2.
If I use the "tilde" shortcut. on any panes....I get a full screen as well on #1
I can not drag any application windows onto #2. They will disappear behind the full screen and one has to turn off Monitor 2 in the Playback Prefs to see them again and return them to #1.

XI / PI Monitoring checks

Similar Messages

Maybe you are looking for