XI queing capacity

I am working on an EAI project for a major Retailer in US. They have the option of going for SAP XI as a middleware. However, while evaluating the middleware options, our architects argue that SAP XI doesnu2019t have the messaging capabilities. As part of a typical retails solution, the middleware should play an important role in transforming and transporting the data between the corporate systems and store systems. A retailer might have over 1000 stores across the country/countries. The middleware should have the capability in transporting a single message, to all the 1000 stores.
In connection to the above business requirement, I have the below questions to be clarified:
- Does XI has the queuing capabilities?
- How can we measure XI's queuing capabilities in comparison with MQ?
- Can it connect to multiple source and target systems of different technologies?
- Can XI route a single source message to multiple destinations, say over 1000

Hi,
First of all, As far as my knowledge is concerned and as far as i worked for many middleware technologies,
SAP XI is best. Yes , there are always pro's and con's for all technology but SAP XI is one which less con's than others. So i will bet if you go for SAP XI you will be in benifit. Now come to your question.
>>> Does XI has the queuing capabilities?
Yes. Ofcourse XI have queueing capability and it gurantees delivery in any condition. IN PI 7.1 , these things enhanced and its an added advantage. Till PI 7.0, we can prioritrize our messages using Queue prioritazation depending upon the priority .
>>>How can we measure XI's queuing capabilities in comparison with MQ?
All middleware has there own capabilities. As MQ is based on MEssage queuing , but this protocol is used by some other middlewares also and XI also support this with added queueing features.
>>>Can it connect to multiple source and target systems of different technologies?
This is pure EAI / Middleware work. Its EAI/MIddleware work is to connect with multiple Systems, both in Sender and receiver side irrespective from the technology they are using. So yes, SAP XI is a middleware tool and all these capability is with SAP XI. It also provides additional components like BPM. Try searching SDN and you will find many blogs and article.
>>>Can XI route a single source message to multiple destinations, say over 1000
Yes again. You route a single message to any number of destinations you want. There are lots of thing you can do with XI.
Hope this will clarify you.
Regards
Aashish Sinha
PS : reward points if helpful

Similar Messages

Bonjour , est que quelqu'un sait comment connaitre la capacité d'un album sur iphoto ?

bonjour , est que quelqu'un sait comment connaitre la capacité d'un album sur iphoto ?

je suis désolé
: Google Translator French: Rough translation of the French into English:
User is trying to print information onto paper to make a CD Sleeve, I believe. Here is what they wrote:
Downloaded itunes 11
Opened itunes on PC
Create music CD
Used "Print" in "file".
Never had problem before but now list is unreadable and "crushed together".
I went to "Layout" to change Format, but it works in Formats.
How do I find the function I used before I upgraded?
When I print, I use paper size a4 210 x 297 which corresponds to the size of a CD sleeve?
Thank you in advance for you answers!
? Pourrait fonctionner?
Essayez:
Mise en page de capture d'écran au format.
Enregistrer sur le bureau.
Imprimer l'image.
ou,
Recréez manches CD à l'aide du programme Paint ou InDesign.
Imprimer.
Might work?
Try:
Screen Capture layout in Format.
Save to Desktop.
Print image.
Or,
Recreate CD Sleeve using Paint Program or InDesign.
Print out.

Mode stockage grande capacité (installation GPS Garmin)

J'ai installé l'application Garmin (GPS) sur mon iPhone mais lorsque je veux faire une mise à jour, je reçois le message que mon espace disque est insuffisant (4.1Go de libres)....
Si j'essaie d'aller sur la page de Garmin pour enregistrer l'application et tenter de faire une mise à jour à partir de cet endroit, je reçois le message suivant : Aucun téléphone trouvé. Vérifiez qu'il est en mode de stockage grande capacité et rééssayez...
Quelqu'un sait ce que je devrait faire?

carlos mate if you had a genuine copy it wouldnt ask you for a product code the product code would allready be on the memory card
the product code would also be with the packaging that came with the product
why dont you email garmin and tell them your official garmin product dosent have the product key on the memory card
i think youve bought a fake version from ebay or something???
to the user that cant get signal , it sounds like you have a broken gps unit on your n97 its a very common problem just google gps problems on the n97
there is a 20 page discussion in this maps forum about the issue
once your bars go green youll have signal and be able to use it , without a signal you can make a demo route , its in the tools section mate
its a nice bit of software is garmin thats why everyone should buy it if they want to use it
symbian had tomtom many moons ago but due to piracy theyve bailed out and gone to the iphone , so not buying it isnt doing anyone any favours , we want updates and good software then buy it support the devlopers guys , otherwise when they stop making it due to piracy what are you going to do then
i can recomend navmii as well if you go here
http://forum.navmii.com/default.aspx?g=topics&f=1
and ask for a free weeks trial to test they will send you an activation code that will last a week so you can try it out , they also watch their forums alot and awnswer questions and listen to improovemnts
with this one when you buy it you get free map updates and software updates for a year as well defo worth a look peeps

En "Crear versión MP3" aparece la versión MPG1 capa 3 que no es compatible con un reproductor de coche.

Tengo un macBook Mac OS X versión 10.7.4 y iTunes versión 10.6.1
Cuando activo "crear versión MP3" el resultado es MPG1 capa 3 que no es compatible con mi reproductor del coche. Antes, la versión resultante era MP3 sin problemas de compatibilidad.
Además, si deseo disponer de una copia de la canción en una carpeta de grabación, desde la versión MPG1 capa 3, no se copia el contenido de la canción.

web translation
It is not common, but sometimes, when I want to delete files from external hard drive where they are housed and remove them from the catalogue of LR, get me a message warning me that the volume is not compatible with the Recycle Bin and files will be deleted permanently.
Yesterday I was making cleaning of the catalog and it gave me the message in all the deleted files, but today all normally works.
It has never given me this message with files that are in the internal hard drive and I have not done any change between yesterday and today in my albums, or its connection or anything, everything is exactly the same.
If it was timely alga, did a restart of the computer and continued giving me the message.
I have full access to the external drive from Finder and everything deleted from there goes to the trash normally, I checked it yesterday.
Why LR do me that? Am I doing something wrong? How can I fix this if I move?
The version I have LR is the 5.7 in an imac
My system is an iMac 27 "mid 2011, OS X 10.9.5
The external drive is a WD My Book Studio of 3 TB connected by USB 2.0
Mount point: / Volumes/BOOK 1 capacity: 3 TB
Format: Mac OS extended (journaled) available: 1.13 TB
Owners enabled: Yes space used: 1.87 TB
Number of folders: 1002 number of files: 110.392

Actualice mi iphone y al tratar de activarlo indica que no tiene acceso al servidor de Apple

Hola
Ayer actualice mi Iphone 3GS a la nueva version 6.1, pero al momento de activarlo me dice que no tiene acceso al servidor de Apple, ¿que puedo hacer?

Google Translate:
Algunas personas han sido capaces de resolver esto mediante la descarga de la aplicación Find My Friends, iniciar sesión con su ID y contraseña de iCloud y aceptar los términos y condiciones de iCloud allí.

HT3775 No puedo abrir formatos .AVI. Informa que falta un códec. ¿Qué hago?

No puedo abrir videos en formato.AVI por que falta un códec.

Si quieres desplegar usando QuickTime Player, instala (el proximo a descontinuarse) Perian que incorpora bibliotecas capaces de abrir .AVIs en QT: http://perian.org/
O descarga y usa VLC, que puede abrir muchisimos tipos raros de archivos graficos: http://www.videolan.org/vlc/

Que es ''otros''?????

se que no es sistema operativo por que el itouch es de 8gb y puedo usar 6.4 entonces los 1.6 gb que faltan es el ios y lo note por que la capacidad era de 6.7 pero actualice a ios 5 y bajo a 6.4 !!
-ipod touch 4g 8gb

Refer to this link for explanation.
https://discussions.apple.com/thread/2703966?start=0&tstart=0
In reality, you have around 7.4GB of capacity and IOS 5 used up more than IOS 4 and o available capacity dropped to 6.4GB.

Buenas noches necesito saber hasta que capacidad de dimm puedo cambiar a mi mac mini es modelo 2010 y actual mente tiene dos dimms de 1GHz cada uno y saber cuanto cuestan cada dimm

hola buenas noches:
quiero saber hasta que capacidad de dimm le puedo poner a mi mini mac es modelo 2010 actual mente tiene dos dimm cada uno es de 1 GHz y que costo tiene con ustedes.

Google translate:
want to know until I put dimm capacity to my mac mini 2010 model is now mind has two dimm each is 1 GHz and has cost to you.
Apple says:
2X4 GB sticks
Mac mini (Early 2009), Mac mini (Late 2009), and Mac mini (Mid 2010) computers have two internal memory slots. These slots accept a standard PC3-8500 DDR3 204-pin SO-DIMMs (Small Outline DIMM) with the following specifications:
PC3-8500 DDR3
unbuffered
non-parity
204-pin module
1066 MHz
DIMMs with the following features will not work with these Mac mini models:
registers or buffers
PLLs
ECC
parity
EDO RAM
But
Unofficially 16 GB (2 × 8 GB) 1066 MHz DDR3 SDRAM, via non-Apple suppliers[57]
https://en.wikipedia.org/wiki/Mac_Mini
Macs are picky about memory, make sure the vendor says they will work with your 2010 Min and yo can return them if they do not work

Nous avons un IPAD 2 3 G 32 GB qu'il n'a qu'une « Capacité » de 14 GB

Bonjour,
Nous avons un IPAD 2 32 GB et quand nous le branchons sur I Tunes il nous mentionne dans "Résumé" qu'il n'a qu'une "Capacité de 14 GB
En aditionnent les applications musique etc.. nous avons que pour 14 GB
Qu'elle qu'un peut nous aidé
Merci d'avance

nice :)
But it's better to create a static function to do this, and better not to hardcode the split character. I use something like this:
public final static String[] split( String str, char separatorChar ) {
      if ( str == null ) {
         return null;
      int       len    = str.length();
      if ( len == 0 ) {
         return null;
      Vector    list   = new Vector();
      int       i      = 0;
      int       start = 0;
      boolean   match = false;
      while ( i < len ) {
         if ( str.charAt( i ) == separatorChar ) {
            if ( match ) {
               list.addElement( str.substring( start, i ).trim() );
               match = false;
            start = ++i;
            continue;
         match = true;
         i++;
      if ( match ) {
         list.addElement( str.substring( start, i ).trim() );
      String[] arr    = new String[list.size()];
      list.copyInto( arr );
      return arr;
   }You could also modify it to return the vector, but in my case, an array is much nicer.

Mon ipod touch ne lit pas les musiques, alors que se sont des musiques téléchargé sur itune. Qui a la raison?

J'ai téléchargé deux musique via mon ipod sur itunes.
Mais voila elles apparaissent dans la bibliotheque de mon ipod mais impossible de les lires, pourtant elles se sont transmise sur mon iphone et mon ipad et la elles se lisent.
Qui a la raison?? Et la solution??

Arg, depuis que j'ai fait ce tuto, j'ai quitté android, et je n'ai pas d'android sous la main pour vérifier que cela fonctionne encore !!
Le dernier commentaire date d'il y a trois semaines, donc on peux supposer sans certitudes que ça marche encore avec la dernière version..
Je ne peux que te conseiller de vérifier que tu as tout suivi rigoureusement, et essayer avec une autre carte SD ! La capacité de la carte SD doit absolument être supèrieure à celle de la mémoire interne du télephone !

New to Fios: Schedules Recordings and DVR Capacity

I just gave up on RCN in lieu or Verizon Fios and thus far - can't stand the dvr.
1) The capacity is no where near what RCN's was. I had days worth of TV, movies, etc saved and never ran out of space. With Verizon, it's been less than a week and I`m already half full. I don't have a HD TV, but I`m wondering if my lack of space is caused by the recorder taping in HD. How do I check this setting to ensure that everything being recorded is standard definition?
2) The Verizon DVR is really bad at only keeping two episodes of a show, and only recording new/first run shows. Is there any setting to make this work better? I tried to set it to record first runs only of the show scrubs, on any channel (i wasnt sure what channel the new ones are run on) and in two days it taped 10 episodes...

The FiOS DVR has the same 160GB capacity as the RCN DVR.
SD channels are 0-499 and HD channels are 500+. All the SD local channels can be found under 50.
Recordings from HD channels consume 3-6x the capacity of SD channels.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Report for calculating capacity utilization and Efficency

Hi,
We are following REM in our company. The production line is defined in the production version. While backflushing the production line is called automatically and hence backflushing is done.
We calculate the capacity utilization by using the formulae.
Capacity Utilization = (Backflushed Qty/ Available capacity)*100.
My queries are:
1. Is there any standard report to determine the capacity utilization of a production line.
2. Is there any standard report to calcualte the efficency of a production line.
waiting for reply.
With regards,
Afzal

Hi afzal
1. you have mentioned ; Available capacity = Std.time per piece * no. of working hrs
Let me explain with example
suppose per piece if it takes 10 mins, now according to your formula
A.C = 10* 24 * 60 = 14400 per day, but which is not correct
normally if 10 mins/ peice means 6 peices/hr and for 24 hrs 24*6 = 144.
so it must be A.C = no. of working hrs / Std.time per piece.
2. You have mentioned = capacity utlilised = total Backflushed qty per day., which means you are caluculating capacity utilization based on input material.
3. Utilization = (Avaliable capacity/ Capacity utilised) * 100
suppose let us consider Available capacity per day =100
capacity utilized = 50
Utilization = (100/50) * 100 = 200%, which is not correct it should be only 50%
Here my main doubt is why You are caluculating capacity based on input material.
Please explanin me you business process and whats the exact requirement so that I can help you out.
Please check the formulae

Features I would like to see in Capacity IQ

Hi all,
I am currently implementing Capacity IQ in our virtual environment and I encounter some issue's. I know some probably will be solved by VCops however it is yet uncertain whether we will purchase that software.
- I have 4 vCenters, so I need to log into Capacity IQ 4 times. This makes it hard to provide a Capacity Plan for over all my resources.
- I have multiple hardware platforms in the same vCenter. Sometimes my managment would like to know what the remaining capacity is on a specific platform. I cannot select multiple clusters, so I need to provide a forecast myself.
- Capacity IQ does not provide the intelligence for performing a what-if analysis on datacenter level.
- Some of my clusters function as a DR test-cluster. Never running any machines only during the DR-test, which are scheduled frequently. I would like the option to exclude clusters in Capacity IQ's trend analysis. This way the DR-test does not mess up the trend analysis.
- I cannot enter a custom account to schedule reports with(workaround logon to vCenter and schedule)
- I need the reports to be written to a NFS/CIFS share somewhere, so I can serve them from there and anyone can go look for themselves.
Any ideas with regards to these issue's are much appreciated!
Regards,
Ad

have you follwed this link ?
http://www.vmware.com/pdf/vmfs-best-practices-wp.pdf
please award points if you see fit.Thanks

No puedo conectar iCloud desde Windows vista, me marca error de servidor. Que hago para poder acceder iCloud desde vista?

No puedo conectar iCloud desde Windows vista, me marca error de servidor. Que hago para poder acceder iCloud desde vista?

The neighbor discovery on mac and PCs is based on broadcast.
I think it's the same for yoru SQL application.
Broadcast are blocked by default on the controller. You can enable "broadcast forwarding" in the controller menu

Since downloading ios5 on my iphone 4 the capacity guage in itunes shows other as over 21Gb and i can no longer fit any music on it. How do I get rid of the other stuff? other

Since downloading ios5 on my iphone 4 a few days ago, the capacity guage in itunes shows "other" as over 21Gb and i can no longer fit any music on my iphone.
How do I get rid of the other stuff?
capacity available on 32 Gb iphone is 28.49Gb
i previously had 21.97 Gb music, over 6 Gb photos, about 1Gb of apps, and minute amount of audio
now i have no music, 5.4 Gb photos and similar (0.8Gb) for apps and audio. i have deleted heaps of photos and unused apps to try to make space but obviosly this is a much bigger problem. I also created a smaller music folder on itunes to sync to but at present no music is selected for syncing due to the lack of available space.
i have 15Gb icloud account now also which is about half full.
Ive done a little research and heard similar tales but with much smaller other totals than this. Can you help?
i cant update my apps as i get a message saying i do not have enough available space.

I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first.

XI queing capacity

Similar Messages

Maybe you are looking for