XI - restrict access to Communication Channel and Receiver Agreement

Hello Experts,
We are trying to restrict the access to certain communication channels and receiver agreement in our XI system. We are able to restrict access to business service but not the afore mentioned objects.
Our XI system version is 7.0 with SP level 17.
Thanks
Vijaya

We raised an OSS message and found that the issue was due to a missing JAVA patch

Similar Messages

Dynamic Communication Channel in Receiver Agreement

Hi Experts,
I have the situation: one Receiver System with one Inbound Interface. This Receiver System is able to receive messages on this interface through different Communication Channels.
I want to have a possobility, based on message content, to dynamically select which Communication Channel to use.
So is it possible to do such a config, without dublicating the Inbounb Interface with a different name (maybe to set some values in Java Mapping?)?
Best Regards

I have one Receiver System, so maybe, you mean conditions in Interface Determination
No. I meant receiver determination only. You use same receivers in more than one cases.
As asked, why do you need multiple channels?
Regards,
Prateek
Edited by: Prateek Raj Srivastava on Feb 27, 2009 6:58 PM

5 Sender communication channels and 1 receiver channel

My scenario demands to handle 5 different select queries from single data base.
I need to have 5 sender communication channels for editing an employee and only 1 receiver channel at receiver side and i'm using one common Functional module to handle.
Can i handle the above situation in one single interface??? like having 5 sender communication channel at sender side and 1 receiver communication channel at receiver side??
Thanks
LN

like having 5 sender communication channel at sender side and 1 receiver communication channel at receiver side??
Yes it is possible....if it is not possible for you to combine the query into one.
How is the data to be processed? Is the data pulled by the 5 sender channels, to be merged into one target message? Is yes then you have to make use of a BPM.
If the Data from 5 sender channels will be individually forwarded to the receiver channel then there is no need of a BPM.

Automating Communication channel and message monitoring

Hi,
Right now i am trying to automate communication channel monitoring and message monitoring for SAP PI. Kingly suggest me how can I go ahead and which language I can use(java or dot net) ?. I will be needing to generate a report for every half an hour about the status of the communication channel and for successfull and failed messages. Kindly assist on what criteria I can use.
Kindly help on this.
Thanks and regards
Nagaraj

Hi
As far as i know there is not easy way to acheive it by calling some webservice or chacking DB table. I developed some tool in .net by calling direct webpage using HTTPRequest class
Regards
Maciej

Sender and receiver agreement not cerated

Hi .
I am creating configuration scenario in ID by importing the integration scenario which i created in the IR.
I crated communication channel template also and i added it to the integration scenario in connections.
Query 1?
do i have to create Communication channels also.....even After creating communication channel template (because it is not seen the ID below communication channel )
Query 2 ?
once i transfer this integration scenario from IR to ID and cerate the configuration scenario (sender and receiver agreements are not getting created automatically)peace tell me what is the reason???.
and how can i resolve this...
thanks
shakif

Hi Mohamed,
Query 1?
do i have to create Communication channels also.....even After creating communication channel template
Yes You have to create as it's just a template that u created in IR. But u can use the same for creating CC.
Check this link for what's the Diff. B/w CCT in IR and CC in ID
Re: Communication Channels
Query 2 ?
once i transfer this integration scenario from IR to ID and cerate the configuration scenario
Yes. it will create automatically.
Just check my posting in Wiki for simple File to IDOC scenario might be u missing something
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
and check my reply in this thread
Re: Doubt in transfering integration scenario from IR
Regards
Sachin

Receiver and Interface Determination, Sender and Receiver Agreement

Hi Experts,
Could you please tell me, what Receiver Determination, Interface Determination, Sender Agreement and Receiver Agreement we have to use for the below blog.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Regards
Sara

Hi Sara,
WS->BP
Receiver Determination: Sender IF, Sender NS, Sender BS determine the BP
Interface Determination: Sender IF, Sender NS, Sender BS determine your start msg IF (abstr IF) and IF mapping
Sender Agreement: SOAP sender channel for that Sender IF, Sender NS, Sender BS
Receiver Agreement: not reqired
BP->DB
Receiver Determination: BP IF (abstr), BP IF NS, BP determine the 3rd party BS (DB)
Interface Determination: BP IF (abstr), BP IF NS, BP determine Inbound-IF and IF mapping
Sender Agreement: not reqired
Receiver Agreement: JDBC receiver channel for that Inbound IF, NS and 3rd party BS
BP->File
Receiver Determination: BP IF (abstr), BP IF NS, BP determine the 3rd party BS (File)
Interface Determination: BP IF (abstr), BP IF NS, BP determine Inbound-IF and IF mapping
Sender Agreement: not required
Receiver Agreement: File receiver channel for that Inbound IF, NS and 3rd party BS
Regards,
Udo

Is associating communication channel to sender agreement necessary

Hi,
Is it necessary to associate communication channel to sender agreement to pick the message from the specified source directory

Hi Santhosh,
To pick the message from sender side , sender agreement should be required, thre are some cases where we dont need the sender agreement for IDoc Adapter and HTTP adapter. bcz these two adapters are resides on Integration server.
See the below link
http://help.sap.com/saphelp_nw04/helpdata/en/db/73e03fc2269615e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/2c1640033ae569e10000000a155106/content.htm
Regards
Chilla

Problem with communication channel on receiver side with file adapter

Hi all,
I m doing a scenario of collection of multiple idocs into a file.When i m testing this scenario,i m getting a flag successfully executed in SXMB_MONI.But,my file isn't created in my directory.When i monitor the communication channel in Runtime workbench,it's showing error :Channel has not been correctly initialized and cannot process messages for my receiver file adapter?I am not able to figure out the error.Anybody having idea about this problem.
Regards,
Anoop

Hi Anoop
Check it - File adapter is active ? try to Re-activate the same.
Also do CPACache Refresh.
Still problem, tyr out by restarting the Adapter Engine
Cheers..
Vasu

Reward Points if found useful **

Ver 8.8 Restricted access to BP accounts and activities

Currently, I am not aware of a way to restrict access to certain BP accounts, including the related activities for a BP. For example, our bank, HR consultants, etc. where I would like to limit the access to these BP accounts and related attachments to certain users, such as our management group.
Primary importance would be to limit access to related activities where sensitive information may be stored in the form of emails, attachments, etc.
Our previous CRM allowed us to flag BP accounts as restricted and set up permissions to authorized users.
Is anyone aware of a way to limit access to these activities?
If not, this is a great enhancement for future releases.

Current system design has only set up confidential GL Account but not for BP. You probably need to post it on the R&D forum here:
/community [original link is broken]
Thanks,
Gordon

JMS (Sender Communication Channel) and MQ in Mainframe (Legacy) System

Hi All,
Can we use JMS Sender Communication Channel in XI that runs on Windows 2003 server to DIRECTLY poll messages from MQ in Mainframe (Legacy) system??
I understand that we can install MQ on XI server and have mainframe push the messages to XI MQ so that JMS can poll but wanted to see if there is a way to do this without having MQ on XI server.
If you know of any documentation regarding this, can you please post it?
Thanks,
Jay

Jung,
Are you looking for this help:
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Also check this sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
---Satish

Same IDoc, different communication channels for receiver

Hi,
In my file-to-IDoc scenario I need to send the same IDoc type to 2 different receiver channels. But these channels are created in the same service, and also the sender service is the same in both cases, so I cannot create two receiver agreements (one per channel).
I've tried to create a message interface with the IDoc as message type, allowing me to create two receiver agreement this way. But then sxmb_moni shows a kind of error like this:
"IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF
Unable to interpret IDoc interface
I've been searching in the forum, but I couldn't find anything useful for this issue. Can you help me with this?
Thanks in advance,
Paco.

hi,
>>>>>I've tried to create a message interface with the IDoc as message type, allowing me to create two receiver agreement this way. But then sxmb_moni shows a kind of error like this:
don't do that
>>> In my file-to-IDoc scenario I need to send the same IDoc type to 2 different receiver channels.
use another interface message which can be based on the
same message type
Regards,
michal

Communication Channel and JMS

Hello Experts,
I am a newbie to SAP Xi so my question may sound a bit odd: please advise me.
I would like to send a JMS after the end and successful completion of a Communication Channel.
This Communication Channel is doing sync of an external DB with the SAP DB.
I have setup a free JMS server from Sun (version 4.3). My environment is full Windows 64bits.
I know I need to setup the proper JMS drivers in SAP Xi to allow the use of the JMS module adaptor,
but I'm unsure of the steps I need to follow to change the behavior of my communication channel.
Please suggests Experts.
Thanks and Regards,
Saule 73

Thanks a lot for this documentation!
it has proven very usefull for the implementation of a JMS object inside Xi.
This is definitely a step forward...
But I am still missing an element in the puzzle :
Once I have:
_ a configured JMS server (Sun 4.3),
_ the JMS object (sender) defined in SAP,
_ a communication ready to be used,
If I want the communication channel to trigger the sending of the JMS, must I :
_ write down a Entreprise JavaBean module to do the trick (to be included into the communication channel)
OR
is there another way to ask the Communication channel to do it (preferably not involving to much development)?
Thanks experts,
Saule73

Restricting access for import manager and syndicator

Hi All,
I wanted to know whether is there any way on how we can restrict the access to import manger and syndicator.
I have one scenario whether user needs to be given the access to data manager only but not to other components.It is ok if they are able to open but should not be able to import or syndicate.
Please help in this
Thanks
Nitin

Hi Nitin,
No i get your point Nitin,I said if a unwanted user logs into Import manager he can try to add/modify/replace record,this can be stopped if he is not given the rights.For this go to Console,Admin table and goto Roles and set rights and privileges on that.
whenever a user logs into Import Manager he has to give his user id and password,and from there we can control this.
If he tries to import records,it will fail.also if he tries to modify map,it wil fail too.
To get a clearer picture try doing it for one user and run this scenario.
An excerpt froim reference guide:
"The groups and functions displayed in the Name column are listed in Table 89; access privileges for each function are directly editable in the Functions pane"
record - Add records
 Modify records
 Modify checked out records
 Delete records
 Merge records
 Merge checked out records
 Protect records
 Unprotect records
 Check out records
 Check out new records
 Check in owned records
 Roll back owned records
 Check in non-owned records
 Roll back non-owned records
 Modify join permissions for non-owned records
Consolidation and distribution - Add import maps
 Modify import maps
 Delete import maps
 Add syndication maps
 Modify syndication maps
 Delete syndication maps
 Enable key mappin
You can control these setting privileges in Console.
thanks,
Ravi

Helping the Community: Giving and Receiving Kudos

Members,
We wanted to highlight one of the major components of the Verizon Community – Kudos. Giving Kudos is a way for community members to give positive feedback to another member based on the contents of a particular forum post. Simply put, it tells the person receiving the Kudo that their post was helpful to the discussion and deserves to be recognized.
Besides recognizing individual excellence in the community, using Kudos lets the receiving member know their time and effort in assisting with a question is appreciated, thereby increasing the likelihood they will continue being supportive within the community. In addition, giving and receiving Kudos is a component of the Community Ranking process.
How to Give Kudos
If a member views a post that they believe warrants congratulations, they may give that poster a Kudo by:
On the message from the member you’d like to give the Kudo to, click on the yellow Kudo button on the right side of the post.
Once clicked, the Kudu image will show the addition of at least one (1) Kudo point. Multiple members can Kudo the same post, so that post can be Kudo’d a maximum of 99 times.
Once you have given the post a Kudo, each party will receive credit – the original poster received points in the Kudos Received category and the member who awarded the Kudo receives Kudos Given credit. Kudos can be applied to Verizon Community Forums, Blogs and Idea Exchange entries. The most frequently Kudo’d community members are displayed on the community homepage.
Important notes about Kudos
Members cannot Kudo their own posts, nor can members Kudo the same post more than once.
Anyone who has contributed a post to the community may give a Kudo to a post.
Kudos from some members may have increased weight, e.g., instead of one point for each Kudo Given, these members Kudos count for two (2) points.
Be mindful of Terms and Conditions
As always, we welcome your feedback and ask
that you post any comments or suggestions you may have.
Sincerely,
The Verizon Community Team

There are a few ways:
- Work on the wiki, if you like writing documentation for distros.
- Improve Arch's system utilities - just wander around in the bugtracker until you find something unassigned that looks like something you could tackle.
- Write random utilities like I have and throw them in Community Contributions
If you want to open your own mirror, you basically just need good bandwidth, both up and down, and either an uncapped link or a very expansive cap. From there, the mirror maintainers probably have a set of scripts set up to keep all the mirrors in sync.
-dav7

Tables for Receiver Determination and Receiver agreement

Hello Experts,
Is anyone aware if there is a some table which gets updated whenever we create a receiver determination or receiver agreement in PI. If possible can you guys give me the table names.
Thanks in advance,
~ Suraj

hi Suraj,
SAP XI is built having two stack the abap and the java stack. Its not all that correct that only cache info resides on the java stack and nothing on the abap stack.... Its like black box and the internal workings are hidden from end users ... only sap would be able to tell you. As someone in this thread has given his point of view that only cache info is stored on the java stack which may be correct but how much so is open to debate. I wonder whether you have played around with the table that you come across with the transaction sara.
Suggestions are most welcome
Regards
joel

XI - restrict access to Communication Channel and Receiver Agreement

Similar Messages

Maybe you are looking for