XI Runtime Cache issue \ Integration Directory HMI

Hi guys,
I have installed SAP XI. In the configuration steps for the INTEGRATION_DIRECTORY_HMI, I select the connection type H and am able to enter the necessary information. However, when I get to the Logon tab and try to select Basic Authentication, the system grays out the Userid and Password fields. As a result, I am unable to set the userid and password. I get warning at the bottom of the screen that says "SSL client PSE DFAULT does not exist".
I ran the transaction "STRUST"....what am I supposed to do here?
Any help would be appreciated.

Hi Sandeep,
Hava a look at this thread, where a problem of the same kind is solved.
SXI_CACHE fails to refresh
one of the solution is that, "You only need to press "Enter" once to get rid of the SSL Client PSE default error! Then you can press save.
If you want to enable SSL, see note 510007."
This might solve your problem too.
Regards,
Chandra

Similar Messages

Error in Integration Directory

Hi Experts,
In ID When I Go for Environment-->>Cache Notifications
I Got the Following Error

Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
I Checked With All PI* Users, None of them are Locked.
In The Runtime Workbench Component Monitoring-->> All Components AE, SLD,IR , ID, RTW, Are in the Green State Only.
Here If I Clicked on the Cache Connectivity Test Means It's Giving Error.
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.epnwsrv, string], target element type: SAP_BusinessSystem)
Please Resolve this Issue.
10 Points If Problem is Solved
Regards
Khanna

HI Khanna
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
did you try to clear the SLD cache in Integration Directory? After that SLD information is newly read and so your biz system will appear.
To clear SLD cache go to menu "Environment" --> "Clear SLD Data Cache".
Have a look at these threads ?
Unable to determine name of central adapter engine
Wrong Adapter engine in RFC Adapter after export/import
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.epnwsrv, string], target element type: SAP_BusinessSystem)
Same kind of problem discussed here.. have a look at this thread.. might be helps to you....
Attempt to fetch cache data from Integration Directory failed
Cheers...
Vasu
** REward Points if found useful **

Integration Directory changes not reaching Runtime

Dear all,
I changed a few values on one of the communication channels but is not getting reflected on the runtime. Looks like a cache refresh issue, so I did a 'cache connectivity test' in RWB.
Integration server JAVA and Integration Server ABAP and Central adapter engine are the three entries present under integration directory.
The first two are fine and are in green but the third one(Central adapter engine) is in yellow. The details show
--Cache notification from Integration Directory received successfully (in green)
--Attempt to fetch cache data from Integration Directory not yet started or still in process(yellow)
Tried to refresh the result but it is still in yellow.
So as per the 'how to handle cache' guide, I checked the RFC destination INTEGRATION_DIRECTORY_HMI and it seems to be fine. Also I have checked http://<host name>:<port>/dir/hmidiag/ext?method=info and that seems to be working fine as well
Please can you suggest what could be going wrong or what else need to be checked
Cheers
danus

Danus,
Just check this document and follow the steps given:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards,
---Satish

No value mapping in Integration Directory, but they are in the cache

Hi,
I recently got acquainted with the fabulous world of value mappings in PI. Until now, FixValues did the trick for me, but now I have to modify the errors in someone else's work.
I read this article:
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5&overridelayout=true
and a bunch of other help.sap.com stuff and I still don't get a very specific thing in our system. When I check the cache from the runtime workbench, the values, agencies and what have you are all ok. However, when I go to Integration Directory, disregarding the fact that I don't have any values on the search helps for Agency and Scheme, which is quite weird, when I put the correct Agencies and Schemes, I don't get any value displayed, just blanks.
Why does this happen? Is it something wrong in the PI configuration or something that I don't see any value mapping there, altough they are in the cache?
Thanks in advance and best regards,
George

Hi ,
1. Create Value Mapping directly in ID (this cannot be seen in RWB, it can be only seen in ID)
*Just a corection we can see the value mappings created in Integration directory in RWB in cache monitoring.*
Just follow these steps to refresh your cache. you will no longer be able to see deleted Val mappings and newly created entries will also shown immediately.
1) Go to integration builder -- > Administration --> click on Runtime tab --> cache overview
You will find 2 things over there :
Value Mapping Group Cache
Value Mapping Value Cache
Refresh both of them. I hope it will work as it always work for me :).
Thanks
Inder

Integration Process does not appear in ID or Runtime Cache

I created an Integration process and it has not appeared as an available service in the Integration Directory when createing a receiver determination. It also does not appear in the runtime cache.
Last week I created a different IP and that exists in both places. Between that time and now we migrated the SLD from one machine to another; I don't know if this will have an affect, but all messages interfaces created today appear in the Integration Directory, so there is a communication path at least.
Can anybody advise how to proceed?

Hi
You should import the IP from IR to ID.
In ID Goto Objects tab, here expand Service without party, you got the IP, from here you right click mouse>new>give some name and import your created IP in the IR.
Then you get the IP in the ID.

Integration Directory - Cache Notifications Error!!

Hi ,
When i try to select "Cache Notifications" in directory i am facing this error below.
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
I can see in SLD -> technical system -> exchange infrastructure, the entry for Integration Directory is missing. I ve applied note 764176 , but it is not helping. Similarly the entry for RWB is also missing here.
ve checked in SLD -> Admin -> Content Manitenance and the assocations are missing for IR & RWB. I beleive these errors are closely related. ve chked exchange profile XIDIRUSER & XIRWBUSER pwds , chked the roles , they are the same as our DEV / QA envionments.
Can anyone pls point what am i missing here
Thanks
Saravana

Hi Saravana,
About the roles for XIRWBUSER...you can check the same in the ABAP stack...go to transaction SU01 and check the Roles attached...it should have the following entries...
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
These should be sufficient as it is working for us...also...the roles gets passed along from the abap stack to the J2ee stack....
Now to your original issue...we had to change our sld in our system to a new box and had to re-configure....we got the same error that you were getting...
we corrected it by doing the following...
Corrected the entries in the Visual Admin under SLD data supplier service... for the HTTP tab as well as the CIM tab.
Did the SLDCHECK(TCODE on abap stack) and made sure everything was ok....
Did a CPACache refresh full...and of course a restart....
that solved the issue for us...
Thanks,
Renjith

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Attempt to fetch cache data from Integration Directory failed

HI,
while checking cache connectivity testing: status is
 green: Integration Repository
 green: Integration Directory
 green: Integration Server - JAVA
 red:Adapter Engine af.axd.aipid
 yello:Integration Server - ABAP
Jun 30, 2007 1:16:08 PM - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
what to do?
and there is nothing under integration server and integration engine but there is an green status under Non-Central Adapter Engines > from this i am doing send messeage testing fro xi to bi ,
send message to: http://aibid:8000/sap/xi/engine?type=entry
payload:
<?xml version="1.0" encoding="utf-8"?>
<ns1:MI_VCNdatatoBI
xmlns:ns1="http://bi.sap.com"
xmlns:xsi="http://www.w3.org/2001/XMLSchemainstance">
<DATA>
<item>
</BIC/ZG_CWW010>1000<//BIC/ZG_CWW010>
</BIC/ZVKY_CHK>1<//BIC/ZVKY_CHK>
</item>
</DATA>
</ns1:MI_VCNdatatoBI>
i can sent message from there (component monitoring > Non-Central Adapter Engines) but unable to get it at message monitoring and at BI side.
dushyant.

thanks,
but i have adepter type XI
and i am folowing step of this lonk and there is no need to create fild adepter type according to that and almost done but while sending message through config. monitor in RWB it goes but not coming in mess monitoring and at bi side
see 4.5 > 3 and 4 topic and 4.6 > 3,4,5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
now what to do?
dushyant,

NO INTEGRATION SERVER, Error while refreshing the XI runtime cache

Hello guys,
I have the following error in an integration scenario of SOAP -> PI -> PROXY.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">BUSINESS_SYSTEM</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>NO INTEGRATION SERVER</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone migth now what could be happening? I already checked The Receiver XI Adapter parameters and everything seems to be rigth.
Thanks for your help,
Regards,
Felipe

Hi,
The error is clearly showing there is cache error.
To resolve this..go to SXI_CACHE tcode and do a delta cache refresh or full cache refresh.
That will solve ur problem
Please award marks if found useful.
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from requesting points
SDN PI/XI Forum Moderator
Thanks
Hamja

Cache Notifications Error in Integration Directory

Hello,
I'm having an interesting problem at my client's PI 7.0 system. When I update my changelist, I can see problems in Integration Directory - cache notifications. Integration Builder works fine. When I retry the cache refresh manually, I turns to green.
But, Communication Channels with adapter type XI are not created even when I activate my changelist and manually fix the cache refresh if there are errors. All other adapters can be seen in Component Monitoring - Adapter Engine - CC Monitoring, but XI type adapters are not there.
How can we resolve this problem?
Thank you,
Gökhan

Hi,
Check all steps in this doc (Especially from Page 20 to 24): [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34]
Thanks,
- Gujjeti.

Adapter Status Grey and Cache Error in acessing Integration Directory

Dear All
While going through the following path
RWB-->Component Monitoring->Adapter Engine->Cache Connectivity Test
i got the following result
" Cache notification from Integration Repository failedError when accessing the Integration Directory "
RWB-->Component Monitoring->Adapter Engine->Adapter Monitoring
I am able to see the list of all adapters but all the adapters have Gery light status instead of having a red or green light status
Kindly tell me what to do...how to change the grey light status to green light and how to set the Cache right
and going by the following path
Thanks in anticipation
Chakra and Somnath

Hi Somnath,
Check out this link for cache Connectivity:
How To handle Caches in SAP XI 3.0
https://websmp206.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Cheers,
Vijay Raheja

Integration Directory - Cache Notifications

I just installed QA box. I am trying to move my Integration Directory objects. When I do cache notifications in ID I get an error in the cache notifications Integration Server (ABAP Cache).
Any help is appreciated.

Hi Michael,
What type of error are you getting ?
Anyway if you did not go thru this document, then please have a look into this-
https://websmp101.sap-ag.de/~sapidb/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Hope this helps,
Regards,
Moorthy

Disappeared - Integration Directory - Runtime workbench

Hi,
Does not appear (Integration Directory - runtime workbench) after installation I can see if this set is PIXI 7.1
Thank you very much.
[Imagen|http://s3.subirimagenes.com:81/otros/previo/thump_5655324001.jpg]
Greetings

Hi
After the installation did you run the PI Install templates from the NWA or configured it manually?
Please check the Exchange Profile and see you have all the parameters.
Login to the below url
http://hostname:port/webdynpro/dispatcher/sap.com/com.sap.xi.adminweb/AdminApp
Click on Directory-> All properties and check the key and value information.
if you dont see the valid system and port name. you have to correct it in the Exchange Profile and restart the system.
Thanks
Kiran Nekkanti

Integration Directory, Cache Notifications with error

Guys,
In Integration Directory, I create one Comunication Channel, but, when i actived one, it dosnt appears in RWB Comunication Channel Monitoring.
In Integration Directory -> Environment -> Cache Notifications, show the following error:
Integration Server (Central Adapter Engine) | Directory Change List | pisuper | Standard Change List
With "Standard Change List" as: Not Yet Started
Details: Never change Status.
Can anybody help me?

Also check in SLD technical system for Exchange Infraustructure.
Check weather Adapter enginer is registered or not.
Your XI domain should contains 6 entries
1.Adapter engine
2.Domain
3.Integration Directory
4.Integration Repository
5.Integration Server
6.RWB

SXI_CACHE - Integration Directory Cache problem

hi
im getting this on 001 but not xxx client.
I id post installation also. i switch client 001 to another.
while SXI_CACHE - Integration Directory Cache TC i can't see cache also manu option that adpter engine.
Thanks
Sachin

Check if the right client has been identifies as integration server in SLD and check right URL has been mentioned in SXMB_ADM.
VJ

XI Runtime Cache issue \ Integration Directory HMI

Similar Messages

Maybe you are looking for