XI - SAP R3 - XI Scenario
I have a scenario
JMS 1 -> XI (BPM 1) -> SAP R3 -> XI (BPM 2) -> JMS 2 (all interfaces are synchronous)
I found when BPM 2 is triggered, it doesn't work until timeout (PL_TIMEOUT). But if I only run SAP R3 -> XI (BPM 2) -> JMS 2, then it's ok.
The connection of RFC is 5, and I also test 2 paralle SAP R3 -> XI (BPM 2) -> JMS 2, it's ok too.
Is there any suggestion for me? I have no idea how to find the reason.
Hi Dennys,
I am having a similar problem.
Did you ever manage to sorti it out?
Thanks in advance
Dimitris
Similar Messages
-
Webservice (oracle erp applications) to SAP PI to SAP R/3 scenario.
Hi All,
I have to make webservice (oracle erp applications) to SAP PI to SAP R/3 scenario.
1. If I make Outbound Interface with 2 fields in SAP PI. Publish its Webservice in Service Registry and then
send its WSDL URL to oracle erp applications system team.
Question --oracle erp team is asking me how they will call my webservice with 2 parameters so that JDBC Table which has 2
fields can be passed to my webservice and its parameters.
2. If I use JDBC sender adapter scenario -- Please let me know if am doing the things fine
a. Oracle erp System driver to install at SAP PI system
b. Connection, host name etc. information will be provided by ERP team that I will use in JDBC sender adapter
Please let me know for the aboce scenario
ThnaksHi ,
If I make Outbound Interface with 2 fields in SAP PI. Publish its Webservice in Service Registry and then
send its WSDL URL to oracle erp applications system team.
Question --
oracle erp team is asking me how they will call my webservice with 2 parameters so that JDBC Table which has 2
fields can be passed to my webservice and its parameters. Please let me know
The below approach is when above webserive is not used.
2. If I use JDBC sender adapter scenario -- Please let me know if am doing the things fine
a. Oracle erp System driver to install at SAP PI system .
Question -- If I install Oracle erp System JDBC driver in SAP PI system then what is use of ora14jdbc.jar.
Do i need to that also. Please let me know. -
New article: SAP SRM Technical Scenarios u2013 Decision Matrix
Dear colleagues,
This is to inform you of my new article posted on SDN:
[SAP SRM Technical Scenarios u2013 Decision Matrix|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50df82f9-37f9-2c10-1584-c711fbb47544?quicklink=index&overridelayout=true]
The article discusses how to employ decision matrix methodology to facilitate the task of selecting a (primary) SRM technical / deployment scenario: Classic, Extended Classic, Standalone.
More SRM-related articles can be accessed under:
http://www.sdn.sap.com/irj/scn/articles-srm-all
Enjoy
Cheers,
SergueiHi Serguei,
Thanks a lot your article about the Technical Scenario -Decision matrix.
Continue your Good Work. I need a help.
I am SRM consultant for the past 3 +years..
I want to learn about Service procurment on my own Can you send some link or any articles related to service
procurement on my Business ID
Regards
G.Ganesh Kumar -
Webservice creation for SAP XI/PI Scenarios
Hi,
How can I develop A simple Webservice for any scenario, for example, if am doing File to file copy scenario,So I want to develop a Webservice for the same scenario,
I want to develop webservices for the entire Scenario, for this I am Using Microsoft Visual Studio.
I Shall Create a Form/Page for UI to select the source file, and when I trigger the Copy button, the service should execute the backend SAP XI Scenario and the file should get copied.
How should i proceed to develop the Webservice?
Regards,
VarunHi Varun,
Let me understand this-
>>Also here my sender Adapter is File and Receiver Adapter is File
Do you mean to say that you can't change the existing FILE-PI-FILE scenario to Webservice-PI-FILE scenario on PI box?
If yes, then you just need to create a UI to copy the file in the source file folder as specified in FILE adapter settings and set the FILE adapter poll interval. It will keep polling the file source file directory and pick the file from there.
Am I missing something here?
And also can you tell me what do you mean when you say "service"? You want it to be invoked following some user action? I guess it would be difficult to directly trigger the PI excecution when you have file adapter at both the end.
Regards. -
Hi,
I have following scenario: SAP triggers a proxy to XI which calls a webservice. Right now proxy from SAP reaches XI, however i get following error when trying to consume the web service on third party server : com.sap.aii.af.ra.ms.api.DeliveryException: Connection closed by remote host.
This is a secure webservice for which we have done neccessary configuration on XI side. Not sure if this error is because of something missing in the configuration or something else.
The target url in SOAP adapter which points to the wsdl is viewable in browser.
Please advise.
Thanks
AnandHI All,
I think the error that i was getting till now is resolved.. however I get a different error now, following is the error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
hi,
i've been going through the REAL ESTATE SALES component under SAP ECO (engineering construction and operations).
i've tried searching for best practices regarding real estate sales for a demo example scenario, but was unable to find on the help portal.....kindly advise where can i find it.
thnx.Hi,
have you checked the materials available on the Service Marketplace: http://service.sap.com/eco ?
Hope that helps!
Message was edited by: Ivaylo Ivanov -
Need Sap Interactive forms Scenario.
Hi Experts! Its an urgent,
I need some simple scenario based on HR related for Sap Interactive forms by adobe, If it is workflow invoved also no problem. Any one can send that plz.
Advance Thanks,
vikram.cHi Vikram,
If the MSS (manager Self Service) packages are deployed in your portal, you will be able to use the PCR (Personnel change Request) Forms. You can submit the forms and the approvals can be prorperly routed using the Worlkflow.
There are a list of standard PCR forms provided by SAP. Please do look into them for a demo.
At the R/3 end, you will get the details of these PCR forms (ISR - Internal Service Requests), using the transaction - QISRSCENARIO.
Do dig into this link.
<a href="https://websmp109.sap-ag.de/adobe">Interactive Forms based on Adobe</a>
Hope you have got your answer.
Kindly update if it helps you. Also search in SDN for relevant detials. There are many general threads in this forum, regrding introductory links.
Thanks and regards ,
Anto. -
Hi Friends,
This is my first message in this group. Now i am in developing the XI interface between SAP R/3 & File System.
This is regarding the transfer of Vendor master data from SAP R/3 to a file system as xml file.
The requirement is:
I need to fetch the vendor master data from SAP R/3 and some data from SAP APO system from LOCIO table. The link between SAP R/3 Vendor data and SAP APO LOCIO data is LIFNR -> LOCNO. By taking the data from these two systems i need to send the data as xml file to the file system.
Please give me the approch for this requirement.
Regards,
SatishHi Satish,
Refer this blog for idoc to file :
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
and also
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
for multiple idocs.
In your case you need to use a bpm.
regards
Priyanka -
New to SAP XI BPM scenario File -- RFC -- File
Hi All,
I am new to SAP XI BPM,
My Scenario is : the input parameter for the RFC is sent through a file and the response from the RFC comes into XI which is then written into a file.
Here my dought is How many Container I have to create... and tell me what is use of Container...
Thanks & Regards
SivaWell in short I would like to say is
A Conatiner is like a table whose structre is having two fields namely ELEMENT and VALUE so it is nearly similar to decalring variables in the general programming , but here in the workflow terms we call them as Container elements. and Conatiner is a place where all the defined variables are stored with Name/Value pair.
Now coming to the issue , the file which is imported from XI make sure that it has the structure as Name//Type/Value
Count the number of lines and create the conatiner dynamically by using the class CL_SWF_CNT_CONTAINER from the ABAP program it has lots of methods check it . -
Portal to SAP ECC XI Scenarios
Hi Guys,
I want to develop Synchronous XI scenarios from Enterprise Portal to SAP ECC. All scenarios will be triggered from Portals, will get information from SAP ECC and send it back to Portals, synchronously.
Is SOAP to RFC the only available type of communication that I have ?
What about performance ?
Thank you.>
Evaggelos Gkatzios wrote:
> Why ?
Portal means a front-end application...in normal case the user will not be comfortable to wait to get a response back (portal --> pi --> some backend application).....hence it is recommended not to use PI (or other middleware) in between...unless you have a very strong reasonfor it.....have a Portal --> backend application config.
In a previous project many of the Portal scenarios were directly integrated with SAP ECC system.
Imagine you use google and then google inturns runs it search along other applications to give you the results....the wait time. -
SAP Standard ALE Scenarios List
Hi Guys
Can anyone tell me where i can find a list of all SAP Standard ALE ScenariosHi Karan,
U can serch in Google with key word SAP ALE Scenarios.
U can find lots of scenarios....
Thanks, -
Dear HEC experts
My customer would install a new SAP ERP landscape (DEV + QAS ) in HEC and mantain PRD on Premise.
Could you explain if CR transport continue to run as all systems are on premise or I have to manage STMS differently ?
And in terms of RFC / ALE scenarios with other SAP on premise systems is SAP PI mandatory for integration or not?
Thank you very much for any suggestions
Best regards
GianluigiHi,
Refer the thread:
IDOC [SAP R/3 ] TO SAP XI TO HTTP ADAPTER....
IDOC configuration :
This is expalined both the scenarios:
Please follow the below process for configuration:
Pre-requisites for Inbound IDoc to R/3 from PI:
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for PI (SALE transaction):
Maintain Partner Profile for XI system(WE20):
Pre-requisites for Outbound IDoc from R/3 to PI:
Configurations required in R/3:
Maintain Logical System (SALE)
Define RFC Destination (SM59) which points to PI system
Maintain Port (WE21)
Maintain partner profile. (WE20):
Maintain Distribution Model (BD64):
ALE configuration for pushing idocs from SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Thanks
Chirag Gohil -
To migrate SAP business connector scenario to SAP XI.
Hi,
I want to migrate my IDoc-http sap bc scenario to sap xi.
1:What the basic things do i need ?
2:what basic steps do i need to perform to migrate a sap bc scenario to sap xi?Hi Shewta,
from a BI perspective, please check the HowTo-Papers available in this area.
You find them at:
<a href="https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000073641&_SCENARIO=01100035870000000202">SAP Service Marketplace HowTo guides</a>
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team -
Source is a File system and Target 2 SAP reciever system scenario??
Hi All
Can you please guide me how to do the below scenario.
sender is a FTP server , will pick the data from here .
and RECIEVER there are two Business system (SAPI), BAPI is being used here
for one is working fine , but how can i do it configure to trigger the same data to flow in both business system .
Please help .
i will be thankful if can post a step via step document .
Thanks
Regards
PriyaHowdy,
Try the instructions in the wiki below:
http://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
In your case it's really just the Integration Directory side of the scenario as your Data/Message Types will be identical.
Cheers
Alex -
SAP SD Sample scenario / mock project
Hello,
Can anyone send me some sample scenarios or mock projects for practice. I'd really appreciate if someone can post some links here or send me via mail. My email address can be found in my profile.
Thank you!
AmitavaHi,
[SAP Best Practices Baseline packages - Based on SAP ECC 6.00|http://help.sap.com/bp_blv1600/V5600/BL_US/html/index.htm]
Now click on technical information and then on content library.Now on the right side pane you will find all scenarios related to different ,odules will be displayed.You will have configurations,scenario's and master data related documents.
Assign Points if useful.
Thanks and Regards,
Naveen Dasari.
Maybe you are looking for
-
Item Number in Dynamic Table Quirk
I'm a new LC user, ramping up to speed on this package, thanks to everyone for the useful information here and other places. Using the great advice and info here, http://www.assuredynamics.com/wp-content/uploads/2010/11/Assure-Dynamics-Building-dynam
-
Imessage not working after update to iOS 7
imessage is not being activated after the recent upgrade. Anyone else is having issues?
-
Urgent help with simple BPEL process
Hello there, I need help with BPEL project. I'm new in JDeveloper&BPEL and i'd like to create process that we'll after sending employee ID return personal details of that employee. I did create application, BPEL project and connection to the database
-
Hi, Is there any way make an entry into MARM table manually? Regards, Pra
-
Nikon D40X incompatibility in raw files?
I was planning on buying the Nikon D40X DSLR until I noticed that it is incompatible in the raw format with iphoto and aperture. I am a retired amateur photographer. Since I have never before worked with raw files is it worth abandoning this purchase