XI Scenario RFC to RFC ?

Hi,
   We are having a XI scenario where in we have to get some information from SAP SCM System get the Rate & distance from the R/3 Saystem & update back in the SCM system.
For this we have written a Program in SCM system which will send data to XI with the help of SENDER RFC.
IN R/3 System also we have written an RFC which will get the Rate & distance & send Back this information to XI with SENDER RFC.
This Sender RFC is again MAPPED in XI with Receiver RFC of SCM which will update the SCM system back.
We have also created the RFC destination for both the systems.
When-ever we are scheduling the Program from SCM in XI we are getting following errors.
Error in processing caused by: java.lang.ArrayIndexOutOfBoundsException: ArrayIndexOutOfBoundsException
What could be the reason for this ?
Secondly we have not defined any INBOUND / OUTOUND Interface since we are using RFC. ( is the design Correct ?)
& we want this interface to be run as Asynchronous scenario.
Pl. help......
Regards,
Umesh

Dear Srini,
        we have chaecked this it is all correct. we have tested the MAP in Single Test. It is working fine. we feel that it is not coming till mapping. it is getting rejected at Adapter Engine itself. (Pl. correct me if i am wrong).
       Secondly is my design is correct. ( no INBOUND / OUTOUND ). & how can i say this is Asynchronous scenario.
Regards,
Umesh

Similar Messages

  • Scenario SAP R/3 --(RFC)-- XI--(RFC)-- JCo.Server

    Hello,
    I am wondering if anyone can send me some feeback for such scenario. SAP R/3 version is 4.6c, SAP XI is 3.0 and JCo are 2.0.12.
    I am having some trouble which I think are link to the fact that the SAP XI is Unicode and not the JCo.Server ... However I was thinking SAP XI will adapt, since it works well for scenario SAP R/3 (RFC)> XI (RFC)> SAP R/3.
    Thanks for your feeback.

    Hi Grégory,
    I guess I faced a similar problem,  the problem was that in the receiver RFC adapter you have to specify both an RFC target system and a system to lookup the metadata.
    The target RFC system hat to have the same unicodeness of the metadata lookup system that means in your case that if jco server is non unicode also you R3 has to be non unicode otherwhise it will not (never) work, because this is a mandatory requirement of the RFC adapter.
    In my case this was not possible so I was redirecting the RFC call to the ABAP stack of XI (where I had exposed the same function module which was simply recalling the same function module to the target system) and it worked/works.
    Regards,
    Sergio

  • XI scenarios using Sender RFC Adapter

    Hi Forum,
    I am eager to know what kind of XI scenarios use sender RFC Adapter, can u give an example,
    does this mean........executing a RFC in a R/3 system and the result of the execution goes to XI.....or,
    does this means, like a sender JDBC Adpter, from XI, triggering execution of a RFC on a R/3, and getting back the result into XI............
    can i have a step by step blog to create such a scenario....
    thanks and regards

    Hi Sudeep,
    Sorry for late reply.
    Yes the 2nd reply was for receiver RFC.
    1. As i mentioned To configure Sender RFC you need TCP\IP connection. in that connection you will use the option registered server program and will mention a program ID there.
    2. Sudeep just remember, please configure RFC sender on XI side first and give a Program ID there, gateway service, host and login of your R3 system. Program id can be any string your name also. and please dont forget to activate the channel before going to R3 side.
    3. Then configure RFC in R3 side, and mention that same program id. mention your gateway host as R3 name or IP and you can get the gateway service from Tcode smgw. it must be something like smgw<xx>.
    and for ur information the program id is nothing but an identity on which basis the R3 system will search that which server object is active using that program id.
    4. when you will write a report to execute that RFC in background,  use Commit work as last statement.
    Please let me know if you want any further information.
    Rewrds if found helpful,
    Regrds,
    Alok

  • Rfc to rfc without bpm scenario

    Hi,
    I am trying to do RFC to RFC scenario without BPM.but in sender communication channel following error is coming.
    Sender channel 'CC_RFC2RFC_SENDER' for party '', service 'BS_RFC2RFC11' (internal name 'RfcServer[CC_RFC2RFC_SENDER]')
    Server data: {jco.server.gwhost=192.168.2.12, jco.server.progid=program_rfc2rf, jco.server.gwserv=sapgw00, jco.server.unicode=0}
    Repository data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=000, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=bcuser, jco.client.sysnr=00, jco.client.ashost=192.168.2.12}
    Current pool size: 1, maximum pool size : 1
    Can anyone please tell me the cause of this error.??
    Thanks
    Rabi

    Hi Priyanka,
    I did as you had told but it is again showing same problem.
    Will you please help me to resolve it?
    Thanks
    Rabi

  • RFC TO RFC SCENARIO

    Hi,
    I want to try RFC to RFC scenario .For this have One client with Solution manager and another client has R/3 on it .I want update  a z table in R/3 from the data i have in solution manager (RS001).
    I want to know following things :
    what is the program ID in RFC sender adapter ?
    where should i make the rfc destination .....which my abap program will call ...via xi ....picking data from solution manager.

    Hi,
    what is the program ID in RFC sender adapter ?
    The same ID as u configure in RFC destination at sending SAP system.
    where should i make the rfc destination?
    1. Transaction SM59 on sending sap system: To XI
    2. On XI: To receiving sap system
    which my abap program will call ...via xi?
    Your abap program at sending sap system calls a function modul at XI:
    CALL FUNCTION 'myFunction' DESTINATION 'myDestSM59' ...
    ....picking data from solution manager.
    receiving SAP system
    You need a synchronous scenario. R/3 system function modul works as Outbound, sol man function modul as Inbound.
    Regards,
    Udo

  • Problem in the scenario SOAP to RFC Syn

    Hello All,
    i developed one scenario for our client and development is same like below link.
    http://www.riyaz.net/blog/xipi-consuming-xi-web-services-using-web-dynpro-part-i/technology/sap/6/
    when i test the interface iam getting below error, Please tell me do i need to install any patch in Xi server or do i need to implement any note.
    My SAP XI server version 3.0 and Service pack:19
    2010-07-19 07:24:57     Operation performed     The message has been received by the mail system. Profile: XI URL: http://xxxxxxxxx:50000/MessagingSystem/receive/AFW/XI credential (User): XIISUSER
    2010-07-19 07:24:57     Operation performed     With the connection RFC_http: / / sap.com / xi / XI / System. Attempted placement of the message in the queue of requests.
    2010-07-19 07:24:57     Operation performed     Message queued dCaution
    2010-07-19 07:24:57     Operation performed     The message has been retrieved from the queue dCaution queries.
    2010-07-19 07:24:57     Operation performed     The status of the message has been activated on DLNG
    2010-07-19 07:24:58     Operation performed     Paper channel: CC_R_RFC
    2010-07-19 07:24:58     Operation performed     MP: entering
    2010-07-19 07:24:58     Operation performed     MP: processing local module localejbs/RfcAFBean
    2010-07-19 07:24:58     Error     MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method process.
    2010-07-19 07:24:58     Error     Exceptions occurred for Adapter Framework: Exception in method process.
    2010-07-19 07:24:58     Error     The dissemination of the message to the application via RFC_http: / / sap.com / xi / XI / System failed due to com.sap.aii.af.ra.ms.api.RecoverableException: Exception in method process.:
    com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method Process .. Enabled message "Failed".
    2010-07-19 07:24:58     Error     The status of the message has been activated on FAIL
    2010-07-19 07:24:58     Error     Return of the synchronous error message to the calling application: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in method process.: Com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception method in process ..
    Thanks and Regards,
    Chinna
    Edited by: chinnasapxi on Jul 19, 2010 10:55 AM
    Edited by: chinnasapxi on Jul 19, 2010 10:56 AM

    Hi Cinna,
    >just now i checked the RFC it is working
    this together with the header "Problem in the scenario SOAP to RFC Syn" is missunderstoobable. But ok, the error is inside RFC adapter: may be it cannot create the DIAG RFC call with the XML what you provided in RTW.
    To be shure to have sent the right XML send a message but use a Message Mapping with RFC module as target.
    Regards,
    Udo

  • ** JCO$Exception Problem in RFC to RFC scenario

    Hi Friends,
    I am doing RFC to RFC scenario. We have two IDES system. One XI system. The scenario is to send the Vendor data from First IDES system (Z_APPLE_VENDOR_SEND) to call the RFC (Z_APPLE_VENDOR_INSERT) in the second RFC system. Sync to Sync Scenario. In this case data is passed from source system and mapped to target RFC soruce Structure. But, not able to login into target system. The following error is occured in SXMB_MONI.
    com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=aprins05 SYSNR=01 GWHOST=aprins05 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '172.25.12.23:sapgw01' not reached TIME Fri Oct 17 23:28:55 2008 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2764 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER
    Friends, I have tested the following : SLDCHECK, Connection between IDES and XI system. Checked the Gateway of receiver side IDES system thru tcode SMGW. All are working fine. But, still the problem comes.
    Kindly help me to solve this issue.
    Kind Regards,
    Jegathees P.

    Hi
    Restart the Receiver System once and try again.
    Go throgh the following thread
    (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
    Regards
    Sridhar Goli

  • RFC to RFC scenario fails with error

    Hello Guys,
    In our XI support we found errors for RFC to RFC scenario.
    Some messages failed with the below error :
    SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>503</SAP:P1>
      <SAP:P2>Service Unavailable</SAP:P2>
      <SAP:P3 />
    Latter the new RFC messages were having this error :
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Object not found in lookup of RfcAFBean.</SAP:AdditionalText>
    Now all the messages are getting processed.
    Can you please tell me the cause this happens every now and then.
    What is the solution.

    Hi Rajeev,
    See these threads:
    Re: HTTP_RESP_STATUS_CODE_NOT_OK - Error in ABAP proxy
    Re: 503 Error -  HTTP_RESP_STATUS_CODE_NOT_OK
    XIServer error raised: 503 Service Unavailable with SOAP Adapter
    http://www.saptechies.com/http-errors-in-xi/
    HTTP_RESP_STATUS_CODE_NOT_OK 503
    I hope these will solve your problem. Rewards with points if helpful.
    BR,
    Alok

  • Scenario File to RFC (BAPI): BAPI not executed successful

    Hi Dear Friends!
    At execution of asynchronous Scenario File to RFC (BAPI BAPI_ACC_DOCUMENT_POST)
    I have the following error in RWB Communication Channel (RFC receiver):
    - Error: 2007-07-25 11:08:25 EEST: Message processed for interface BAPI_ACC_DOCUMENT_POST:
    com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message
    to remote system:com.sap.aii.af.rfc.core.client.RfcClientBapiException:
    BAPI not executed successful
    Simultaniously <b>Test Configuration</b> was executed successfully. And mapping is good.
    But I don't any message in <b>target system</b> in <b>sxmb_moni</b> (formed by BAPI).
    In <b>XI system</b> I see in <b>sxmb_moni</b>:
    <Trace level="1" type="T">--start sender interface action determination</Trace>
      <Trace level="1" type="T">select interface mi_sender*</Trace>
      <Trace level="1" type="T">select interface namespace urn:file:to:bapi</Trace>
      <Trace level="1" type="T">no interface found</Trace>
      <Trace level="1" type="T">--start receiver interface action determination</Trace>
      <Trace level="1" type="T">Loop 0000000001</Trace>
      <Trace level="1" type="T">select interface *</Trace>
      <Trace level="1" type="T">select interface namespace</Trace>
      <Trace level="1" type="T">no interface found</Trace>
      <Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
    Please help me understand my error.
    With the best regards,
    Natalia Maslova

    Hi, Dear Friends! Thanks for support!
    My settings of
    Connection between systems:
    DX7 01 (client 001) - XI Integration Server and DE2 13 (client 200) - target system.
    Phisically both systems are in one server: 10.20.30.24 (srv24)
    Business system DE2_200 has Communication Channel: cc_bapi_r, its settings (in Integration Builder Configuration):
    Adapter Type: RFC
    Receiver
    Transport Protocol: RFC
    Message Protocol: RFC (RFC XML)
    Adapter Engine: Integration Server
    RFC Client Parameter:
    RFC Server Type: SAP System
    Application Server: 10.20.30.24
    System Number: 13
    Authentication Mode: Use Logon Data for SAP System
    Logon User: n_maslova
    Logon Password: *******=*******
    Logon Language: EN
    Logon Client: 200
    Maximum Connections: 1
    x Advanced Mode
    x Send 'Confirm Transaction'
    x Commit Handling for Single BAPI Calls
    x BAPI Advances Mode
    Successful RETURN-TYPE Values: 0
    As I understand these settings are the settings of RFC-destination for target system DE2 13 (200) from XI (DX7 01 001).
    In SLD, Business system DE2_200 is defined as:
    Integration:
    Role: Application System
    Related Integration Server: DX7_001
    Technical System: DE2 on srv24
    Client: 200 of DE2
    Logical System Name: DE1CLNT200
    In target system DE2 13 (200) with the help of transaction sm59 I created
    RFC-destination DX7_001 of type H:
    Technical setting parameters:
    Target Host: 10.20.30.24
    Prefix Path: /sap/xi/engine/?type=entry
    Service Number: 8001
    Registration and Safe:
    SSL: Non active.
    SSL: client certificate: DFAULT SSL-client
    Enter to system:
    Language: EN
    Client: 001
    User: PIAPPLUSER
    Status PW: saved
    Password: ********
    After that in this system DE2 13 (200) with the help of transaction sxmb_adm I set in Integration Engine -> Configuration -> Configurate Integration Engine
    (Change Global Configuration Data):
    Role of Business System: Application System
    Related Integr. Server: dest://DX7_001
    Best regards,
    Natalia

  • Can you explain steps in the Async and Sync scenarios JDBC to RFC.

    Hi,
    Can you explain some basic steps in the Async and Sync scenarios for sending data from JDBC to RFC.
    Like,
    The data is picked up from the  database table through JDBC adapter.
    It is passed on to SAP  by calling the RFC. RFC gets executed         
    successfully. The status is returned by the RFC. The status needs to be
    updated back into the SQL database table.
    Is this a sync case or async case.
    What si the diffrences in the sync and async scenarios in the above JDBC to RFC scenarios.
    Soorya

    hi check the below link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
    JDBC Synchronous call using BPM  
    Data Types -
    1) File Input
    2) JDBC Req
    3) JDBC Response
    4) File Response of similar type of JDBC Response.. ( This you can avoid also..let it be for first time)
    Message Types
    4 for each data type
    Message Interfaces
    1) Async, Outbound, Interface, to receieve the file
    2) Async, Inbound , Interface to send the file from XI
    3) Async, Absract , Interface of type File message type to recieve the message in the BPM
    4) Sync, Abstract Interface with Req message type as File Request, and Response Message type as a file Response
    5) Sync , Inbound interface for JDBC with Input message type as a JDBC Request and Output Message type as a JDBC Response
    Message Mapping:
    1)Mapping between File Req to the JDBC req
    2) JDBC Response to File Response
    Interface mapping:
    1) Sender Interface as a Sync,Abstract Interface created for the file type and target interface as Synchrnous JDBC interface.
    Use corresponding mapping for Req and Resp..
    note:reward points if solution found helpfull.....
    regards
    chandrakanth.k

  • ASync RFC -- Sync RFC -- SOAP scenario: do I need BPM?

    Hi,
    I have this scenario. ASync RFC --> PI --> Sync RFC --> PI  --> SOAP scenario.
    Here are the details.
    1. users run async RFC and it will pass data to PI.
    2. PI will call Sync RFC with received data and get the data.
    3. PI now calls web service with received data from #2.
    Do I need BPM to implement this scenario.
    Thank you.
    -Won

    I'm still wondering if it's possible to perform my scenario without using RFC lookup or BPM.
    Yes, it is possible.
    I want to see if PI supports sequence of calling RFC, JDBC, web service, etc and pass data to
    the next call in sequence... without BPM...
    Yes, PI supports that. Please make a search on SDN, there are numerous blogs / posts which talks about A/S bridge without BPM.

  • Third party system (JCO) ---RFC--- PI ---RFC--- ECC

    Hello all,
    We are trying to implement the following scenario:
    Third party system (JCO) -RFC-> PI -RFC-> SAP ECC
    The third party system connect to PI via Java Connector API with a know user id in PI. After that third party system tries to obtain the RFC that is already implemented and remote enabled in SAP ECC environment. But at this step there is something wrong in third party system software because we are not able to obtain the RFC interface and metadata from PI repository.
    1. This step is working correctly. Connection is OK.
                JCO.Client mConnectionPI = JCO.createClient("100", // SAP client
                                                                                    "user_id", // userid
                                                                                    "********", // password
                                                                                    "pt", // language
                                                                                    "10.x.x.x", // application server host name
                                                                                    "01"); // system number
                mConnectionPI.connect();
    2. This step is not working correctly:
                JCO.Repository repository = new JCO.Repository("TestRep", mConnectionPI);
                IFunctionTemplate ftemplate = repository.getFunctionTemplate("Z_RFC_XXX"); - not found exception
    We would like to know if there is something missing in any environment that we have to configure or implement in order to fix this issue. Thanks a lot.

    Hi Primini,
    couple of stupid-but-necessary questions:
    1) have you imported the RFC model in PI Repository?
    You don't need to have the RFC metadata in PI ABAP stack (there is no point in doing that), but rather in the PI Repository/ESR, within the SWCV you've created.
    Check the "Activities" session of this link for more details:
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
    2) if you have done 1), have you configured the RFC Sender scenario properly?
    I mean, have you ran the configuration wizard to create the agreements & determinations, setting the RFC interface as both the sender and the receiver interface? Of course, the systems would be different: as the sender system, you'll have a Business Service representing the legacy/JCo system; as the receiver, you'll have the ERP Business System.
    This should make your scenario work.
    If it doesn't, try one more thing: in the JCo code, just for the metadata repository connection, use a connection to the ERP system. But for the actual call, use the PI system.
    Let us know the results.
    Best regards,
    Henrique.

  • JDBC(Sender)-XI-RFC (Request) RFC (Response)-XI-JDBC(Receiver)

    Hi All,
    JDBC(Sender)-XI-RFC (Request)
    RFC (Response)-XI-JDBC(Receiver).
    Need some solution for sending email for successfully completion of scenario after updating SQL DB Table.
    Let me explain the scenario:
    We are pooling the SQL DB table to pull the records and map the records to RFC request parameters, after successful Posting the entries in R3 HR, RFC response contain the same with E (Error) S (Success) records status, we are updating the same in SQL DB table, I implemented the complete scenario without BPM with the help of module processor in Sending JDBC Adapter, scenario is working fine but now we have to send the successful mail to our support team with status contain Number of success, Error and total records as email.
    I need the solution how to implement the same requirement in current scenario.
    Is their way to do something with the RFC receiver adapter module addition to send the successful mail or generating Alert with all the description?
    I am at PI 7.0 SP12 with HP unix box.
    Thanks in Advance for creative idea
    With Regards
    Sunil

    Hi Bhavesh,
    Thanks for your help and your blog is really helpful. I implemented the UDF for generating Email Alert but this alert is generating before Updating the SQL Database, is their any way to generate alert after updating the SQL.
    Actually in my scenario we are sending the data from SQL to R3 by RFC and again updating the SQL status whatever the RFC return, after successfully updating SQL we need to send success email to support people but if we are sending the email before updating the DB then their will be problem.
    JDBC receiver after updating the SQL DB returns the response with No. of row updated but how to capture this response, if we can capture this response then we can send email through email adapter even their is one more problem, In my scenario I am counting the number of rows with status “S” and “E” and sending the same in alert email but if are sending email after updating the SQL DB where can hold the row count value and use it while sending the email.
    Implemented the scenario without using BPM..i am using sender JDBC module processor for Syn-Asyn bridge.
    Even I do not find the link to reward point. Please let me know how to do it.
    With Regards
    Sunil

  • RFC Adapter  RFC to File

    Hi,
    Can somebody help me to view this thread. I am learning XI using RFC to File and I have got some difficulties in undestanding the Adapter Configuration.
    /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step from Michal.
    When I select this thread, I get blank page.
    Thanks

    Hello MK and Shabarish,
    I need a little more help from you.
    Here is XI Scenario.
    Want to send Material info using RFM from system A to System B via XI.
    Process: In System A, I create an RFM and send the data via dest paramter.
    It looks like this.
      Call Function
         dest 'SYSTEMA_SENDER'
    1. I created T - RFC Destination in systemA.
        RFC Name     SYSTEMA_SENDER
        gateway host  gbdsc1  ( using smgw)
        serveric          sapgw11
        Program id     SystemA_Sender
                             Registered server program, unicode.
    2. In XI box, in Integration configuration, Created RFC sender channel with the following paramter
        Adapter Type   RFC  - Sender
        RFC Server Parameter  -  
                 Applcation server(Gateway)  gbdsc1    ( As in RFC dest System A )
                 App service(gateway)           sapgw11
                 Program ID                          SystemA_Sender
        RFC Metadata repository     
                Application Servr         ( What do I enter here  is it System A)
                System Number
                Logon on User
                Logon pw
                Client
                 Language
      Finally,
    In system A when I do connection test I get the following errors
    Error: Program SystemA_Sender not registered
    Location SAP-Gateway  on gbdsc1/sapgw11
    Detail:TP SystemA_Sender not registered
    and other errors
    Can you identify any correction required for the above RFC destination and RFC configuration?
    Do I need to register the program and if so how?
    Your help is deeply appreciated.
    Regards

  • File- rfc- soap- rfc

    Hi
    I have a scenario  File to rfc it has to update the rfc table & the same file request has to call soap after updating the rfc table & the response from soap has to update rfc again....
    I have designed bpm
    1)Receive step asyc to receive the file
    2)Send step aschyronus to update the rfc
    3)Send step sychronous to call the soap
    4)Transformation step to convert soap response to rfc input.
    5)Send step aschyronous to update the rfc..
    Do i need to use S/A bridge in my scenario...
    Can any one you please breif  me what steps are going to involve in bpm & Coresponding Message mappings & the interfcae mapping.
    Any responses would be greatly appreciated...
    I have seen all the related weblogs...
    Thanks
    ram

    Hi,
    The step are good if you don't need to see whether the uopdate has happened in RFC and based on that you want to go ahead.
    <i>1)Receive step asyc to receive the file</i>
    MI- Oubound async
    MI- Abstract async1
    2)Send step aschyronus to update the rfc
    MI-Abstract async1 (send step will be async)
    The above is if the data structure requred to be sent to RFC is same as in Abstract async1 else do a transformation from MI-Abstract asyn1 to abstract async2
    3)Send step sychronous to call the soap
    Here also if the metadata is not same as that of MI abstract1 then transformation step to move data to abstract sync3 (you need to have two message Interface here request response
    4)Transformation step to convert soap response to rfc input.
    response of the soap will be the input and output would be another MI for file metadata
    5)Send step aschyronous to update the rfc..
    MI for file metadata in previous step.
    6. MI -Inbound async to pass from IP to the service you are using.
    Hope this helps.
    Regards
    Vijaya

  • Failed transformation xml-rfc to rfc

    Hi,
    I have to scenario rfc to jdbc sync, SAP MI <-> XI, but when I executed the rfc, i don´t have problem in SXMB-MONI,  but returned the dump in MI " Failed transformation xml-rfc to rfc". What happen?
    Tks.

    The error isnt logged in SMXB_MONI because it happens in Adapter Engine, which is in java stack (and SXMB_MONI is in abap stack). Therefore you won't be able to see the error there.
    Go to Runtime WorkBench, Message Monitoring and check the errored message there. Open the details screen and check the Audit Log for futher information about the error you got.
    Regards,
    Henrique.

Maybe you are looking for