Xi server not picking up the file

Hi,
My Scenario is flat file to xml.I have declared all the file content conversion parameters and placed the input file in server.But the thing is XI server is not picking up the file.What could be the error.Does any error in content conversion has to do with XI-Server not picking up the file.
Thanks,
Srinadh

Hi Bhargav,
go to SXMB_IFR -> Runtime Workbench -> component monitoring -> adapter engine -> adapter engine monitoring or to communication channel monitoring to see the error in your sender file adapter..........rectify this error in comm channel in ID.......set filemode to delete..........then activate yur comm channel.........then your source file will  be picked by XI........
Thanks,
Rajeev Gupta

Similar Messages

  • Import Server not picking up the file

    Hello,
    I have 2 repositories running on the same server. Import server picks up file for one repository, but not for the other. What could be the reason? Also, for the repository, import server not picking up the file, workflow also does not send an email notification.
    Please help
    Subhash

    Hi Subhash,
    Hope you are not using the same Import Server for both the MDM Servers. If yes then you need to mention the MDM Sevrer name in the MDM Server parameter of MDIS.ini. Check the parameter list of MDIS.ini file.
    If your repository has password for Admin user then you need to specify the same in MDIS.ini file under your repository section for User = Admin and Passowrd = [Admin password]. Remove the E from the PAsswordE and give the password for Admin user. Once done restart the Import Server and check again, parameter Password would have converted to PasswordE.
    For Email Notification two things you need to check:
    1. You should have specified the mail server address in MDS.ini file under your repository section for parameter Mail Server.
    2. Workflow owner should have entry in Email address field of the user. Check this in Console under Admin -> Users.
    Regards,
    Jitesh Talreja

  • My proxy service (messaging) with sftp protocol is not picking up the file

    Hi ,
    I have proxy service , which polls for a file in a regular interval , this has stopped working suddenly . The bad part is i am not able to find any log related to the service in either the domain logs or the server logs.
    I tried to disable the service and re-enable it , but it was of no use .
    Please help me in this , what can i look for next ?

    Bala,
    I just extracted the entire B2B setup as a ZIP file and imported the setup in a DEV UT01 enironment. The B2B was able to successfully pick up the B2B messages using the same ftp channel.If from one env B2B is able to pick the message using same settings then it must be a network issue. You may like to change the B2B log level to debug and then try to disable and enable the channel. See if you get anything in the log.
    You may also try to create an outbound agreement and see if you are able to send message to that FTP location from the same environment.
    Regards,
    Anuj

  • Production issue - Sender File adapter not picking up the files from folder

    Hi Guys,
    Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
    Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
    I can see the files lying there in AL11.
    However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
    I have checked in SXMB_MONI and there are no messages since the morning.
    I have tried craeting a replica of the current channel but it is not working.
    This is teh production server and thsi has alraedy created production issues.
    I ahve checked in the SDN forum but am not able to find the details.
    Plaese help me.
    I am anyway going to raise the issue with SAP now.
    Regards,
    Archana
    <REMOVED BY MODERATOR>
    Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PM

    Hi Prateek,
    I have trying all sorts since the morning and then just checked teh file permissions.
    The file permissions were incorrect as compared ot the other files that were processed successfully today.
    Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
    I got teh permissions changed back to 666 and all the files were pikced up in a minute.
    I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
    However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
    I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
    But there was not a single error in the channel monitoring.
    How can we configure it in a beter way so that we at least soem kind of error indication?
    Please advice.
    Regards,
    Archana

  • Sender File Adapter not picking up the file

    Hello Experts,
    I have configured a sender file (FTP) adapter. All the configurations are right. The name of the file is given exactly as it is. The processing mode is Delete.
    The scenario was running fine till today. I only made changes to the path from which it has to pick the file. I have checked the path numerously and it is correct.
    But the file is not being picked up.
    Monitoring the communication channel shows no errors. It has the green indicator. No idea what is happening.
    Please Help,
    Regards,
    Merrilly

    Hi
    try to make some changes anf then again save and cativte the adapter. may be the adapter is not being activated.
    also check whether the cache is refreshed or not.
    or u can also check in the communication channel monitoring the channel is start or stop. if stop then start the channel and then try again.
    if u still face the problem please reply me back.
    Thanks
    Rinku

  • B2B not picking up the input file

    Hi All,
    I am trying to test aB2B scenario. Oracle B2B is not picking up the file from Endpoint URI. Can someone please suggest. What might be going wrong?
    TIA
    Phani

    Hi Ramesh,
    Its an inbound scenario. I've placed a file on the host ftp server from where B2B is configured to pick the files, which isn't happening.
    Can you please tell me the possible reasons and the files which i've to look into in case of any errors.

  • Unable to pick up the file from Receive Location

    BizTalk is  unable to pick up the files from receive location.
    My admin console is working so slow.
    It is showing the problem of snap-in as follows:
    I have checked all my receive location and its masking,it is working fine.
    Actually it is working fine in dev server(snap-in problem is not occuring in dev server ) but when I import MSI and binding in UAT server.
    It is not picking up the file from receive location.
    I want to know one more thing :if my message box database is not working fine,will it receive the files from receive location.
    Prakash

    For files not received by receive location. If the Receive Location is still enabled but files are not processed by Receive Location, then check whether the host instance  configured with your receive location is running. If the host instance is in
    running state, restart the host instance and try.
    Regarding the error in the admin console as shown in the image, people started to see this issue with admin console from BizTalk 2009 onwards. This happens in cases like you have done some activity with console and before its been refreshed it you do more
    activities like expanding the node you will see this error. Sometimes WMI is bit slowly to refresh your admin console screen. Just wait for few seconds untill the WMI screen is rendered completely. Ensure you have all the cumulative updates installed for your
    version of BizTalk and also ensure the service pack for your OS is updated.
    Obviously if message box is not working, files will not be received/processed. But if message box is not in healthy state this would affect all other application not just one and in-fact it would affect entire BizTalk not just Receive Locations.
    To start analysing this file not been processed by Receive Location, start with checking the host instance as mentioned.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • File is not picking from the source location.

    Hi all,
    File is not picking from the source location. FTP is working properly and file is also placed in source location. I am new the XI, if anybody can give me the solution it would be really helpfull.
    Thanks to all.
    Korean

    Hi Majin,
      Check the folder path properly, check the file name( file name is case sensitive) you have given correct or not. See that your communication channel is active. Also check the cache status and check adapter status also by that you will come to know wht is the problem.
    Thanks,
    Ranjeeth.

  • Embeded OC4J server within JDeveloper does not pick latest JAR files.

    Hi,
    Currently OC4J seems to be using an older version of JAXB1.0. Hence I created a shared library in my standalone OC4J server and imported the shared library while deploying my applicatoin in the ClassLoader task.I am trying to replicate the same in
    my embeded OC4J server within JDeveloper.
    I followed as indicated in readme.txt file in the \j2ee\home\shared-lib\ folder.
    1) I created a folder called "jaxb" within /j2ee/home/shared-lib/. I then created a folder with the name "2.0" indicating the version number of the API.
    2) I then added the relevant jaxb JARS to the jaxb/2.0 folder.
    3) In the server.xml file available under /j2ee/home/config/ , I added the following entries.
    <shared-library name="jaxb" version="2.0">
              <code-source path="jaxb-api.jar"/>
              <code-source path="activation.jar"/>
              <code-source path="jaxb1-impl.jar"/>
              <code-source path="jaxb-impl.jar"/>
              <code-source path="jsr173_1.0_api.jar"/>
              <code-source path="jaxb-xjc.jar"/>
         </shared-library>
    I am still facing the issue where my embedded OC4J server is picking up the jaxb version 1.0.
    What are the steps that needs to be taken to ensure that the embeded OC4J
    takes in the jaxb2.0 version.

    Refer
    Re: SUN Jaxb2.0 incompatible with OC4J included in JDEV/OC4J ??

  • JDBC sender channel running but not picking up the data from sp

    Hi,
    One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB  is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
    Please help, what can be the reason for the same.
    thanks.

    Hi,
    The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
    You can see/delete the locks in Visual admin.
    Go to Server>Services->Locking adapter and click refresh
    The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
    If you have more than one node, then same should be done in all server nodes.
    The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
    But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
    Hope this solves your issue.
    PS: The same bahaviour would expected for all file adapter as well

  • The File name property is not valid. The file name is a device or contains invalid characters

    I have an SSIS task that has run successfully for years. They just moved the dtsx to a new server and now it is failing. 
    Issue:
    The task has a data flow that writes a raw file destination. It then has a subsequent data flow that reads the raw file destination. 
    The path and name of the raw file is passed to each of the data flows via the same variable. 
    The raw file resides in a folder on the server in the same path that the dtsx resides in. 
    The task fails with the "The File name property is not valid. The file name is a device or contains invalid characters" error when trying to access the raw file.
    What we have done to troubleshoot:
    1. I ran the task successfully on my local machine so it is definitely a server issue.
    2. The first thing we were seeing was that it failed trying to write to the raw file. The task is set to "Create Always". 
    3. We saw that the dba's copied over the entire directory structure from the old server which included a previously created raw file, so we deleted the raw file.
    4. We reran the task and it successfully wrote a new raw file but then failed on reading the raw file with the same error as above.
    5. We reran the task AGAIN and this time it failed trying to write the raw file throwing the same error as above.
    6. The dba looked at the directory and the account that performs the task has full control.
    7. The dba looked at the raw file that was created and verified that the account that performs the task has full control of the file and that it is the owner of the file.
    Summary:
    The task fails when trying to access the file EXCEPT when the file does not exist. In that situation it can write the file but subsequently fails in accessing it again.

    Hi Whalensdad,
    Based on my research, the issue can be caused by the following reasons:
    There are some invalid characters in the File name at package runtime. In this scenario, just as Russ said, could you please post the value that is in the File name variable? Also use a Script Task with Messagebox.show to show the variable values at runtime.
    May be it changes to others at run time.
    The account runs the package not having access to all the folders in the path. Since you are moving the dtsx file from one server to the current server, do you also move the raw file to the same folder in the current server? Does the user runs the package
    have access to all the folders in the path? To solve this, please ensure that the user has access to all folders and the raw file in the path on the current server.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support
    Please see the response above. I can't use a message box on a server so I logged the values to the database. The resource account has full control to the folder. I haven't been able to get the DBA to check the SQL Agents permissions, but I was always under
    the impression that if you use "Run As" on the task, it will not use the SQL Agent but the account you identify it to "Run As". The "Run As" account has full control on the folder and file.

  • UWL - not picking up the XML config

    Hi All,
    we have a UWL Application in the UWL Adminstration for the configuration Purpose i need to upload the XML Configuration file. it not picking up the XML Configuration
    can any one reslove this Please.
    Thanks and Regards
    Dileep
    Edited by: Dileep P on Feb 12, 2008 5:59 PM

    Dileep,
    Whenever you upload a new configuration, you will need to clear out UWL cache.
    Please go to "System Administration - > System Configuration -> Universal Work list & Workflow -> Universal Workflow Administration -> Click on cache administration page -> Choose system -> Click "Clear Cache" button.
    Chintan

  • Workflow not picking in the agent

    Hi SRM Experts,
    We are doing an SSp implementation on SRM50. Here we are stuck with the workflow for shopping cart approval. We have done all the settings including the event linkage activation and agent determination.
    But here the workflow works fine if we manually assign the agent. otherwise it is not picking up the agent and it shows'Adhoc Agent not found'. What could be the reason for the same. Please suggest.
    Thanks & Best Regards
    Raj

    please check wether the start conditions for the workflow are active
    at the following location
    transaction --> SPRO --> Supplier Relationship Management --->SRM Server ---> Cross Application Basic Settings ---> SAP Business Workflow --> Define conditions for starting workflows.
    which workflow are you using?
    1) one step
    2) two step
    3) N- STep
    >
    Further to the above please check wether the manager has been maintained for the requestor in ppoma_bbp.
    In the case of classic workflows --> managers are determined by the system from org structure.
    Edited by: khan voyalpad usman on Feb 21, 2008 8:39 PM

  • Why wsgen does not pick up the changed interface in wsdl.jsp?

    Hi,
    After I changed the type of return value in a method in a stateless EJB. The wsdl.jsp
    generated by wsgen does not pick up the changed interface (it still has the old interface).
    The installed ejb works well with new type of return value. But the web service (wsdl.jsp)
    and client.jar does not work. At begining I thought it might be cached. So I cleaned
    the cache in the browser and temporal directory inside wls domain. I also deleted
    all old version of ejbs on my local disks. But there is no effect. I am confused.
    Please help. Where does the wsgen looking for when generating wsdl.jsp?
    Thanks a lot.
    Jim

    Hi,
    Please check the following path if your application is deployed or not properly if you are using eclipse:
    Workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps

  • JRE does not pick up the existing font installed in the OS

    Hi,
    I am developing an application that required to display UTF-8 string in different language, eg. Japanese, Chinese,..., and having some problems with using font
    to display those strings.
    I. Problem:
    For some reasons, the JRE does not pick up the fonts in either jre/lib/fonts or OS's fonts folder (Windows\Fonts) to use to handle these strings. This results in square boxes displayed.
    II. Temporary solutions found:
    I searched and found the following solutions
    1. Put the font in the fallback folder under jre/lib/fonts
    However, this requires to bundle the application with the fonts, it has some problems
    * Bundles all possible fonts significantly increase the size of the JRE
    * It is a waste if the OS already has the font (as in my case Arial Unicode MS font already installed). 2. Modify the font.properties file *<- which is not recommended.*
    III. Questions:
    1. So I am wondering if anyone knows other solutions to this problem?
    2. I came across some sites that says JRE will pick up the font correctly for a language if the OS is localized on that language. Is it true since I could not yet find that statement on sun website?
    Any help or advices are greatly appreciated.
    Phuong,
    PS: I'm using JDK 6 update 6, Windows XP English version

    Hello,
    Do any black bars show on the Airport icon at all?
    I have a 2007 iMac that can barely see my Base Station 4 feet away, an older eMac 7 feet away sees it great!
    On my iMac I use one of these...
    http://eshop.macsales.com/item/NewerTech/MXP2802GU2/
    And a USB extension cable can give  even better range/speed.

Maybe you are looking for