XI supports EDIFACT without SAP Conversion Agent and others.
Hello.
Somebody knows the best way to convert EDIFACT message using XI?
What I can do this without using softwares of conversion like:
- SAP Conversion Agent;
- Seeburger;
- BIC Mapper and others.
Thanks very much in advance.
Hi,
See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Here is the link for your reference:
/people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
http://www.stylusstudio.com/edi/EDIFACT_translate.html
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Thanks and Regards,
Chirag Gohil
Similar Messages
-
SAP Conversion Agent - Performance Tuning
Hi Experts,
We are working with SAP Conversion agent..we have developed several scenarios on that...
But, Now we are worried about the performance issues on the same.
Can anybody share their experience on SAP Conversion Agent and any performance tuning guide on SAP Conversion Agent.
-SHi,
/people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
Conversion Agent
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
Thanks,
Madhu -
SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support
Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
ChristophHi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph -
SAP Conversion Agent: HL7 library project could not be executed
Hi experts
I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
"Invalid service 'TEST'. Check service name and service database"
Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
<description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
<time>N/A</time>
</Event>
</Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
Do you have any ideas?
Thx,
manukuHi Conversion Agent experts,
Do you have any ideas?
Thx
manuku -
How to download to SAP CONVERSION AGENT
Hi,
Im unable to find SAP CONVERSION AGENT software in SAP marketplace.When i go to the following link
SAP Software Distribution Center
Download
Support Packages and Patches
Entry by Application Group
SAP NetWeaver ->
is shows as Data unavailable.Request your help on this.
Regards,
Bhargav
Message was edited by:
bhargav gundaboluHI Bhargav
Try out this
SAP Software Distribution Center
Download
Support Packages and Patches
Entry by Application Group
SAP NetWeaver ->SAP Netweaver->SAP NETWEAVER04->ENTRY BY COMPONENT->PROCESS INTEGRATION--> CONVERSION AGENT1.0
It is working
Thanks
Abhishek Mahajan
***Please reward points if helpful** -
Hi,
I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
2. It is a must to use the EDI message parsing templates provided in the CA library ?
3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
I have gone throught the help document. Please help me find answers for the above questions.
Thanks,
HariHi SreeHari,
Please refer to the link below,which might help you.
[SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
Regards,
Madhu -
SAP Conversion Agent Studio Preview Version
Hi,
Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
Are there newer version of the SAP Conversion Agent Studio Preview Version?
Any suggestions are welcome.
Thx
RobertHi Conversion Agent experts,
Do you have any ideas?
Thx
manuku -
How to download SAP Conversion Agent 7.1 by Informatica
Hi Gurus,
I tried to download SAP Conversion Agent 7.1 by Informatica from following location
Sap Software Download Center---->Browse Our Download Catalog----->Installations and Upgrades----->Adapters----->Informatica----->SAP CA For SAP Netweaver 7.1
but its showing No data available. Can anybody help me how to get this conversion agent.Well, I see it like this and everything work for me:
Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations? -
Sender Mail Adapter with SAP Conversion agent
have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
it seems to ignore the attchment of the e-mail
the sender configuration module tab is as follows :
1.localejbs/AF_Modules/PayloadSwapBean transform
2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
The paramters are
transform swap.keyName Content-Disposition
transform swap.keyName Content-Description
transform swap.keyValue attachment
transform swap.keyValue codeco
CM TransformationName ZIM_CODECO_VALIDATIONS
The Convesion Agnet runs prefectly when using the Conversion Agent engine
thx,Shai Rosenzweigcheck with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek -
Urgent: IDOC to EDI with SAP Conversion Agent
Hi,
I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
We have decided to use SAP Conversion Agent to deal the same.
Can anybody share their experiences on this kind of scenario.
Needed step by step information to complete would be appreciated with the full of points.
Cheers.,
Echeck with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek -
My Wife got an iPhone at work. IT set it up the first time on another machine, they finally install iTunes on her machine but I don't know if she can sync without loosing Photos, SMS, and other things. She had six months of stuff on that phone?
The problem is she can't update to new software until she connect to iTunes, but she don't want to loose all that info.
My question is:
If she register her apple ID on that new computer, and sync the phone, will she loose everything? or iTunes will back up first (because apple id match) and then sync.
Otherwise, how can I do it? The closest apple store is 3 hours away. thanks!Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise her phone will be wiped during the following sync.
If she has data on the phone she wants to save, back up manually:
Disable autosync in iTunes, connect your phone to her new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer the purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Transferring data is also covered here: http://support.apple.com/kb/HT4137 -
How do I uninstall Itunes for windows7 without losing my playlists and other data? My library is on another drive rather than the My Music folder?
Your iTunes library isn't deleted when you uninstall it, so uninstall iTunes without worrying about this
-
SAP XI Conversion Agent and TIFF
Hello All,
Can anyone let us know whether SAP SCript format can be converted into TIFF extension using Conversion Agent.
Thanking you in advance
Regards
AjayHi,
See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Here is the link for your reference:
/people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
http://www.stylusstudio.com/edi/EDIFACT_translate.html
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Thanks and Regards,
Chirag Gohil -
SAP CONVERSION AGENT - XPATH not found in DATA HOLDER?
Hi Eperts,
I'm trying to work on this Tool, getting some problem in Conversion Agent Studio..
I Had created my project with PARSER in Conversion Agent, source file will be Pipeline separated Text File , which has multile rows...And I had created XSD for my Message Interface in XI..
When i'm defining my ANCHORS/MARKERS/CONTENT/ .
getting error in DATA Holder, I'm not able see my Schema / XPATH in the respective namespace...
Could anyone can guide me pl.
Thanks in Advance..
regards,
vasantj.Hi vasantj,
Did you manage to resolve this issue?
I face the same problem.
Please ellaorate.
Nimrod.G -
Conversion Agent and the module processor
Hi,
i have to make an offer for a client of ours. Therefore i was thinking to propose the conversion agent for developing a process module into the inbound communication channel in the XI-Scenario.
But i think i understand sth wrong or does this module substitute the normal mapping inside the XI?!
Can someone give me a hand?!
thx in advanceJens,
Conversion Agrent is used to convert non XMl data into XML and vice versa.
For example it can read a PDF, EXCEL and conevrt it into XMl and also convert XML into EDI formats etc etc.
You use the conversion agent studio to develop the conversion mapping and then deploy it as a module. From the comm channel you call the Conversion Agrent Module which in turn runs on its own Engine and does the conversion for you.
So, if possible, you can also use conversion agent to actually read your source and create iyt in the format of the target and thgerbey replace Mapping. But, it all depends on the feasibility of what you are trying to do.
Regards,
Bhavesh
Maybe you are looking for
-
Help!!! My video disappears in my interactive .swf export
After exporting my InDesign file as an interactive .SWF file, I view its html file on my desktop and everything is working perfectly. Once I upload the files (the Resource file, the .swf file and the html file) everything looks great until I see the
-
On Work Order using Object lists for equip u can manually create Notifi
On a maintenance Work Order using Object lists for equipment you can manually create a notification for each line item. We want to automate this process to do this when we save the document. Any ideau2019s on how to do this? Does a user exit exist fo
-
GPS keeps dropping after KitKat (4.4) upgrade on Galaxy S3
Since my 4.4 upgrade last month, my GPS drops quite often - pretty much every time I use it. It seems to happen either with the delivered navigation or maps, as well as with Waze. I've tried pulling the battery - no luck. Any other suggestions?
-
Have Apple published a manual for the iPad with OS6
Have Apple published a manual for the iPad with OS6
-
Restoring Messages from 6085 to N73
I have upgraded my 6085 to N73 recently. I am not able to restore the messages from 6085 Backup file to N73. The required Messages in 6085 are in folder "Saved Items" but the name of the similar folder in N73 is "My Folders". Pls provide me a solutio