XI System hangs while designing BPM in correlaltion editor

Hi,
While designing BPM scenario in Integration repository, system gets hanged on pressing F4 while specifying condition in the correlation editor.
Thanks and Regards
Rahul Nawale

Hi,
try applying the latest path to your XI server
I had the same with SP13 and SP14 and
the latest path helped
Regards,
michal

Similar Messages

System hangs while booting 2.6.38

My system hangs, while booting 2.6.38
The picture from the screen is here: http://bildr.no/view/844865 (the picture is not mine, but it's the same).
/ is located on raid1 array. Boot is separated to ext2.
Grub:
# (2) Arch Linux
title Arch Linux
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/md1 ro md=1,/dev/sda2,/dev/sdb2 md=2,/dev/sda3,/dev/sdb3 radeon.modeset=1 elevator=noop
initrd /boot/kernel26.img
Tried nomodeset and removing "elevator=noop".
$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4550]
01:00.1 Audio device: ATI Technologies Inc RV710/730
02:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
02:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
04:07.0 Network controller: Ralink corp. RT2800 802.11n PCI
04:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
The same here: https://bbs.archlinux.org/viewtopic.php?id=115190
Last edited by vit (2011-03-24 03:59:23)

The system is booting and hangs in other place.
Updated to .38.1
Doesn't help.
Last edited by vit (2011-03-24 15:29:49)

System hangs while I save or activate Message mapping

Hi all,
After performing the required message mapping whenever I save the Message Mapping the system hangs, it does respond but after a very long time say some 20+ minutes.
But I don't encounter such problems while saving data types , message types , message interfaces etc..
can any one help me with this?
Thanks in advance.
Ajay

Hi Michal,
I have a freshly installed PI 7.1
Im able to run file to file scenarios without mapping.
Im able to activae DT, MT, SI etc..but i dont receive any response from the system when I save a message mapping.
It takes ages to go to test tab, executes after a long time but target shows no message...
can u kindly help me on this?
has ne one faced sch an error before.. Im using PI 7.1

SYSTEM HANGS WHILE RUNNING EXP COMMAND IN ORACLE 10G

WHEN WE ARE RUNNING THE EXP (EXPORT) COMMAND IN ORACLE 10G
TO TAKE THE BACKUP IT GETS HANGED FOR A LONG TIME AND THEN IN THE LOG FILE WE FIND THE FOLLOWING ERROR MESSAGE.
SOMETIMES AFTER RESTARTING THE SERVER WE ARE ABLE TO RUN THE EXP COMMAND.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user MANHAR
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user MANHAR
About to export MANHAR's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
*********************************** AT THIS POINT THE SYSTEM HANGS FOR A LONG TIME.
EXP-00056: ORACLE error 24324 encountered
ORA-24324: service handle not initialized
EXP-00056: ORACLE error 24324 encountered
ORA-24324: service handle not initialized
EXP-00000: Export terminated unsuccessfully
THE EXP COMMAND THAT WE USE IS AS FOLLOWS:
EXP MANHAR/MANHAR FILE=F:\BACKUP\MANHAR.DMP LOG=F:\BACKUP\MANHAR.LOG BUFFER=1000000 GRANTS=Y CONSTRAINTS=Y
WE ARE RUNNING THE EXP COMMAND ON THE SERVER ITSELF.
THE SERVER OPERATING SYSTEM IS WINDOWS 2003 SERVER.
Kindly give us a solution at the earliest.

You should ask Oracle support for help. There's only one entry for this error stack (Bug 3361288 - Export of XMLSCHEMA may fail with ORA-24324 in UTF8), but it should have been fixed for your DB version and , as far as I can see, you don't have a Unicode database.
Werner

Installing Solaris 7 - System hangs while determining bus Types

Hi,
I am trying to install Solaris 7 on my Compaq Presario. My system hangs immediately after the first screen. It hangs on the screen where it says "Bus Enumeration Determining Bus Type and gathering hardware configuration data. Not sure why it is doing that. Any help would be appreciated
Regards,
Ashish.

My system is not branded It is custom bulit.
What more information you want write me.
Thanks for all help
Amit

System hangs while retrieving nearly 80,000 records in HTML output

Hi Users,
I am using Oracle BI Publisher Enterprise.
When I tried to retrieve nearly 80,000 records, the system hangs.
How to get rid out of that.
Awaiting for you reply guys.

Thats common, go for summary report instead of that.

System hangs while working with Adobe forms in Eclipse

Hi,
I am new to SAP ABAP and ABAP in Eclipse. So far we were using SAP GUI, but now we are moving towards Eclipse for ABAP.
I am creating adobe forms in eclipse using Open with SAP GUI option. I am able to create and execute in eclipse but it always hangs when I try opening the layout and then closing it. Once it hangs, I need to kill Eclipse process from task manager. Can anybody help me?
Thanks in advance.

Hello Hemika,
What is the version of Adobe LiveCycle designer on your PC ?
Looks like the Adobe LiveCycle Designer and NWDS versions are incompatible .
1055911 - Creating ZCI based interactive Forms in Web Dynpro for Java
1090464 - Interactive Forms-Web Dynpro Java-Limitations/Recommendation
Regards
Sandy

System hanging on shutdown

The home directories on my system are on NFS.
Most of the times, when users log out of their graphical session, some of their processes keep running (for instance /usr/bin/nepomukserver for KDE users and some processes related to pulse or to chromium).
When shutting down the system, arch scripts first try unmounting network filesystems, and this fails, since /home is busy; then they send a SIGTERM to processes, and this fails as well (I believe it's because the network has been halted but /home hasn't been mounted), then the system hangs while unmounting non-API filesystems.
If, before shutting down, I manually kill the user processes (nepomukserver, pulse, chromium, ...), arch is able to shutdown as expected.
Am I the only one affected by this problem?
How am I supposed to solve it?
I'm thinking about writing a script to terminate (`kill` and then `kill -9`) any process using /home (`lsof /home`), but this looks like a terrible hack...

So, since I couldn't find any other solution, decided to write a script (an init script to add to the DAEMONS array) that kills the processes using /home while halting the machine...
If anybody will ever need it, here it is:
/etc/rc.d/pathliberator
#!/bin/bash
# Path Liberator
# kills processes that are using a given path
DAEMON=pathliberator
. /etc/rc.conf
. /etc/rc.d/functions
[ -r /etc/conf.d/$DAEMON ] && . /etc/conf.d/$DAEMON
case "$1" in
start)
stat_busy "Starting path liberator"
add_daemon $DAEMON
stat_done
stop)
success=true
for path in ${PATHS_TO_LIBERATE[@]}
do
pids=$( lsof -Fp $path | sed -rs "s/^.(.*)$/\1/g" )
if [ "$pids" == "" ]
then
status "$path was already free" true
continue
fi
# kill -TERM
stat_busy "Liberating $path"
kill -15 ${pids[@]} &>/dev/null
pids=$( lsof -Fp $path | sed -rs "s/^.(.*)$/\1/g" )
if [ "$pids" == "" ]; then
stat_done
continue
fi
stat_fail
pids=$( lsof -Fp $path | sed -rs "s/^.(.*)$/\1/g" )
# kill -KILL
stat_busy "Liberating $path with SIGKILL"
kill -9 ${pids[@]} &>/dev/null
pids=$( lsof -Fp $path | sed -rs "s/^.(.*)$/\1/g" )
if [ "$pids" == "" ]; then
stat_done
continue
fi
stat_fail
success=false
done
status "Paths liberated" $success
if [ $success ]
then
rm_daemon $DAEMON
fi
restart)
$0 stop
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
/etc/conf.d/pathliberator
# Parameters to be passed to pathliberator
PATHS_TO_LIBERATE=(/home/)
It seems to be working, although didn't deeply test it...
My DAEMONS array now looks like this:
DAEMONS=(hwclock syslog-ng cpufreq network crond nscd dbus rpcbind nfs-common netfs pathliberator gpm sshd @ntpdate alsa fuse gdm avahi-daemon)
Last edited by peoro (2012-06-13 11:23:17)

Universe Designer Hangs while saving

Hi Experts,
Universe Designer hangs while saving a universe design.
Earlier it was working correctly and suddenly I am facing this issue. I restarted my system couple of times and there was no luck. The designer application works as expected and only problem is it hangs while saving.
In eventviewer, I have following message
Event Type: Error
Event Source: Application Hang
Event Category: (101)
Event ID: 1002
Date: 12/27/2010
Time: 3:23:07 PM
User: N/A
Computer: CHANGED
Description:
Hanging application designer.exe, version 12.1.0.882, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What could be the cause and how to solve this? Any clues appreciated.
Regards
B Ravi Shankar

This happening for all universes. I face this issue even when I import a Universe from CMS and save.
Finally this problem got solved by restarting couple of times. My guess is that it could be due to no of concurrent connections exceeding(Using EDGE 3.1 in 5 CAL evaluation). When I brought down to session count to 2, it is working.
Thanks for quick reply.
With Regards
B Ravi Shankar

Mac pro 5,1 / 10.8.2 / 10.0.7 - while working in fcx and the program and the system hangs (freezing)

mac pro 5,1 / 10.8.2 / 10.0.7 - while working in fcx and the program and the system hangs (freezing). Only moves the mouse pointer. In addition to disconnecting from the mains, nothing helps! what to do?

Yes, it would if you ran it on the new MBP which is the reason I am saying install rather then clone.
If you clone then you are only getting the same code as the old MBP which probably will not have the correct drivers.

While upgrading the system hanged

I was prompted to upgrade & the software downloaded, but while starting the system hangs up

after the software upgrade was installed the system was booting up and it crashed
Now when I try to start the system it asks for the password and after entering the password the systems seems to start but halfway through the process, the laptop shuts down on its own

System Display hangs while call waiting

Hi
I have a black berry 8520 smart phone brought from Airtel and still under warranty. Since past few days, I am encountering an issue while I try to answer a call which is on wait.During this time, the display of the system hangs! The display will show the calling person's details and stand still.
After this, I can see phone ringing if I try to call my number from a different phone. But I wont be able answer the call, I cannot power off/on. The only option left with me is to remove the battery and give a cold boot which take at least 20 mins to come up.
I am looking forward for a help on this issue

Hey philu,
Welcome to the BlackBerry Support Community Forums.
I would highly suggest you perform a clean application load. Since this issue seems to be a software related issue.
Here is a link on how to perform the clean application load: http://www.blackberry.com/btsc/KB11320
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Aperture-3 hangs and the system too, while editing in 100%

I am not sure about other people have the same issue,
Just wanted to explore if any of you have / had the same issue.
I use Macbook Pro 13" (i5 & 4GB RAM), Recently installed aperture-3 from mac store.
I usually shoot in RAW and do the rest with app-3.
In recent days, my aperture and my system hands while editing any RAW image, mostly while using brushes (for sharpening / polarization).
Coincidentally or not, it happened all the times when i have the pis in 100% zoom-in condition.
If you experienced similar issues please share and let know hoe you resolved it... Also requesting experts in this group to throw some light on this subject.
Thanks in advance
Munish

Hello munish,
I'd try some diagnostics first, before you reinstall.
Macbook Pro 13" (i5 & 4GB RAM)
I had the same setup as you - it worked great with Snowleopard, but as soon as I upgraded to Lion Aperture was running at a snail's pace and completely useless. I added 4 GB RAM and all was back to normal. Also, if your harddrive is very full, performance may go down. Keep at least 10% of your drive empty. How full is your disk right now?
To check if RAM might be an issue on your machine, start the Activity monitor (Applications -> Utilities) and look at the memory usage while Aperture is running. Don't run any other apps simultaniously, that are heavy on RAM, like Safari.
And run a hardware check: Using Apple Hardware Test: http://support.apple.com/kb/HT1509
If you cannot find a hardware problem - hopefully not! try the usual trouble shooting measures in turn, for corruption of some files in your Aperture Library may cause similar symptoms, see Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
If you want to reinstall Aperture as described in the post that Nilsemann pointed to - since you installed your Aperture from the AppStore - then you need to enter the following command in a Terminal window after cleaning the libraries before you reinstall Aperture:
Sudo pkgutil -forget com.apple.pkg.GarageBand
That will ensure that all recent update packages will be deactivated and you can update the newly installed installed Aperture.app again to the most recent version. You will be prompted for your admin password when you enter the command.
Regards
Léonie

Close Front Panel Causes System Hang.

I have an application where there are several front panels that I would like to have open at once, but where when they stop they would close. I was using the scripting function fp.close - but as the application has got more complicated this seems to work less and less well. Basically when i hit close, the system hangs for a few seconds, then the time critical stuff i have tends to timeout and then crash, and everything goes funny for a while.
My (uneducated) guess is that when it closes a front panel it drops loads of stuff straight out of memory - in an uncontrolled way.
After going for a cup of coffee it usually sorts itself out. But clearly this isn't a sustainable solution for my application or my kidneys.
Am I doing something wrong? - Is there something i should do to allow the Vi to finish before i try to close it? Should i be releasing references or somethign to make things better. I thought about running the close vi sub as a new thread - but not sure if this would actually do anything different.
Attached - the subroutine that i pass a vi ref to.
Attachments:
RunningVis_CloseSubVi.vi ‏17 KB

There's nothing in the attached VI that would necessarily cause your problem. I would, however, suggest that you feed your reference through the nodes in proper flow control method rather than branching off like you've done.
When a VI fails to close quickly, I have most often found it's due to open references which aren't explicitly closed. File references, VI references, multiple calls in a loop acquiring the same reference over and over without releasing it, .NET calls not being closed - that kind of thing.
Richard

[SOLVED]System Hang in Arch Linux

I have tried distributions like ubuntu and fedora in hope for finding a stable system . So I move on to Arch Linux
But this problem also exist on Arch. While using my Arch Linux (including ubuntu and fedora) my system hangs with a black screen with something written on the whole screen which cannot be pasted here as my system hangs and I have to push power button to restart.
So I check my errors.log file and found these errors
Jul 8 22:59:24 localhost kernel: [ 1.680013] ata3: softreset failed (device not ready)
Jul 8 22:59:24 localhost kernel: [ 7.298612] SP5100 TCO timer: mmio address 0xfec000f0 already in use
Jul 8 22:59:31 localhost kdm_greet[792]: Cannot load /usr/share/apps/kdm/faces/.default.face: No such file or directory
I have a HCL K21 pdc notebook
Note: In Ubuntu my notebook start with ata1: softreset failed error at boot time
Most often this error occur while watching videos or listening music with VLC
Last edited by Manuj19 (2011-07-09 10:13:24)

ewaller wrote:It might be better to just post the output of lspci -nn It will tell us a great deal more about the hardware related to the PCI bus, including specific chip set identifiers.
Thanks for suggestion
Here is output of lspci -nn
00:00.0 Host bridge [0600]: ATI Technologies Inc Device [1002:5a31] (rev 01)
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36]
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38]
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a39]
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 13)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
08:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
08:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08)
08:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
08:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
08:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Last edited by Manuj19 (2011-07-09 07:20:08)

XI System hangs while designing BPM in correlaltion editor

Similar Messages

Maybe you are looking for