XI to BAPI - Configuration required

Hi,
I am in the process of identifying the configuration to be done in SAP XI and SAP R/3 system for the XI to R/3 flow.
The flow is synchronous and it is a BAPI on the SAP R/3 side.
Please let me know the configuration s to be done in XI and R/3 side for the same.
Thanks & Regards
Nagaraj

YOu have to configure a receiver RFC adapter in your XI Intergration Directory:
Read the receiver RFC adapter section in the following link:
http://www.riyaz.net/blog/index.php/2008/02/06/understanding-the-rfc-adapter/
NO additional config steps are required in the backend.
Regards,
ravi kanth talagana

Similar Messages

CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR

제품 : AOL
작성날짜 : 2004-05-13
PURPOSE
RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
Explanation
Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
1. The database instance that supports the CP, Applications, and Middle-Tier
processes such as Forms, or iAS can fail.
2. The Database node server that supports the CP, Applications, and Middle-
Tier processes such as Forms, or iAS can fail.
3. The Applications/Middle-Tier server that supports the CP (and Applications)
base can fail.
아래부분은 CM,AP 구성과
CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
The concurrent processing tier can reside on either the Applications, Middle-
Tier, or Database Tier nodes. In a single tier configuration, non PCP
environment, a node failure will impact Concurrent Processing operations do to
any of these failure conditions. In a multi-node configuration the impact of
any these types of failures will be dependent upon what type of failure is
experienced, and how concurrent processing is distributed among the nodes in
the configuration. Parallel Concurrent Processing provides seamless failover
for a Concurrent Processing environment in the event that any of these types of
failures takes place.
In an Applications environment where the database tier utilizes Listener (
server) load balancing is implemented, and in a non-load balanced environment,
there are changes that must be made to the default configuration generated by
Autoconfig so that CP initialization, processing, and PCP functionality are
initiated properly on their respective/assigned nodes. These changes are
described in the next section - Concurrent Manager Setup and Configuration
Requirements in an 11i RAC Environment.
The current Concurrent Processing architecture with Global Service Management
consists of the following processes and communication model, where each process
is responsible for performing a specific set of routines and communicating with
parent and dependent processes.
아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
있습니다.
Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
Manager.
The Internal Concurrent Manager (ICM) starts, sets the number of active
processes, monitors, and terminates all other concurrent processes through
requests made to the Service Manager, including restarting any failed processes.
The ICM also starts and stops, and restarts the Service Manager for each node.
The ICM will perform process migration during an instance or node failure.
The ICM will be
active on a single node. This is also true in a PCP environment, where the ICM
will be active on at least one node at all times.
Service Manager (FNDSM process) - Communicates with the Internal Concurrent
Manager, Concurrent Manager, and non-Manager Service processes.
The Service Manager (SM) spawns, and terminates manager and service processes (
these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
other process controlled through Generic Service Management). When the ICM
terminates the SM that
resides on the same node with the ICM will also terminate. The SM is ？hained?
to the ICM. The SM will only reinitialize after termination when there is a
function it needs to perform (start, or stop a process), so there may be
periods of time when the SM is not active, and this would be normal. All
processes initialized by the SM
inherit the same environment as the SM. The SM environment is set by APPSORA.
env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
listener must be active on each CP node to support the SM connection to the
local instance. There
should be a Service Manager active on each node where a Concurrent or non-
Manager service process will reside.
Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
Manager.
The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
restarts any failed ICM on the local node. During a node failure in a PCP
environment the IM will restart the ICM on a surviving node (multiple ICM's may
be started on multiple nodes, but only the first ICM started will eventually
remain active, all others will gracefully terminate). There should be an
Internal Monitor defined on each node
where the ICM may migrate.
Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
any client application process.
The Standard Manager is a worker process, that initiates, and executes client
requests on behalf of Applications batch, and OLTP clients.
Transaction Manager - Communicates with the Service Manager, and any user
process initiated on behalf of a Forms, or Standard Manager request. See Note:
240818.1 regarding Transaction Manager communication and setup requirements for
RAC.
Concurrent Manager Setup and Configuration Requirements in an 11i RAC
Environment
PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
GSM,
follow the instructions in the 11.5.8 Oracle Applications System Administrators
Guide
under Implementing Parallel Concurrent Processing using the following steps:
1. Applications 11.5.8 and higher is configured to use GSM. Verify the
configuration on each node (see WebIV Note:165041.1).
2. On each cluster node edit the Applications Context file (<SID>.xml), that
resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
ON </APPLDCP>. It is normally set to OFF. This change should be performed
using the Context Editor.
3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
have been modified also copy these to preserve the files.
4. Regenerate the configuration by running adautocfg.sh on each cluster node as
outlined in Note:165195.1.
5. After regenerating the configuration merge any changes back into the
tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
Each nodes tnsnames.ora file must contain the aliases that exist on all
other nodes in the cluster. When merging tnsnames.ora files ensure that each
node contains all other nodes tnsnames.ora entries. This includes tns
entries for any Applications tier nodes where a concurrent request could be
initiated, or request output to be viewed.
6. In the tnsnames.ora file of each Concurrent Processing node ensure that
there is an alias that matches the instance name from GV$INSTANCE of each
Oracle instance on each RAC node in the cluster. This is required in order
for the SM to establish connectivity to the local node during startup. The
entry for the local node will be the entry that is used for the TWO_TASK in
APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
some directory>/APPS<SID>_<HOSTNAME>.env)
on each node in the cluster (this is modified in step 12).
7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
165041.1 for instructions regarding configuring this entry. NOTE: With the
implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
must be active on all PCP nodes in the cluster during normal operations.
8. AutoConfig will update the database profiles and reset them for the node
from which it was last run. If necessary reset the database profiles back to
their original settings.
9. Ensure that the Applications Listener is active on each node in the cluster
where Concurrent, or Service processes will execute. On each node start the
database and Forms Server processes as required by the configuration that
has been implemented.
10. Navigate to Install > Nodes and ensure that each node is registered. Use
the node name as it appears when executing a nodename?from the Unix prompt on
the server. GSM will add the appropriate services for each node at startup.
11. Navigate to Concurrent > Manager > Define, and set up the primary and
secondary node names for all the concurrent managers according to the
desired configuration for each node workload. The Internal Concurrent
Manager should be defined on the primary PCP node only. When defining the
Internal Monitor for the secondary (target) node(s), make the primary node (
local node) assignment, and assign a secondary node designation to the
Internal Monitor, also assign a standard work shift with one process.
12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
env file on each node in order to specify a TWO_TASK entry that contains
the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
to bind each Manager to the local instance. This should be done regardless
of whether Listener load balancing is configured, as it will ensure the
configuration conforms to the required standards of having the TWO_TASK set
to the instance name of each node as specified in GV$INSTANCE. Start the
Concurrent Processes on their primary node(s). This is the environment
that the Service Manager passes on to each process that it initializes on
behalf of the Internal Concurrent Manager. Also make the same update to
the file referenced by the Applications Listener APPS_<SID> in the
listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
env" on each node.
13. Navigate to Concurrent > Manager > Administer and verify that the Service
Manager and Internal Monitor are activated on the secondary node, and any
other addititional nodes in the cluster. The Internal Monitor should not be
active on the primary cluster node.
14. Stop and restart the Concurrent Manager processes on their primary node(s),
and verify that the managers are starting on their appropriate nodes. On
the target (secondary) node in addition to any defined managers you will
see an FNDSM process (the Service Manager), along with the FNDIMON process (
Internal Monitor).
Reference Documents
Note 241370.1

What is your database version? OS?
We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
Have you reviewed these docs?
Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
How to Setup and Run Data Collections [ID 145419.1]
12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
Thanks,
Hussein

Oracle 10g Installtion error Network Configuration requirements ... failed

Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.

Are you installing Oracle 10G R2? If this is the case then for DHCP network environments, you need to create a Microsoft loop back adapter.
Microsoft Loopback Adapter creation:
===========================
Step 1: Programs -> control panel -> Add Hardware.
Step 2: In the Add Hardware wizard. Click 'Next' and select 'Yes, I have already connected the hardware'. option and click on 'Next'.
Step 3: Select the last option 'Add a new hardware device' from the 'Installed hardware' window and click on 'Next'.
Step 4: Select the last option 'Install hardware that I manually select from the list (Advanced) and click on 'Next'.
Step 5: Select 'Network adapters' in 'Common hardware types' list and click on 'Next'.
Step 6: Where you can see 'Microsoft loopback adapter' on the right hand side of the frame.
Step 7: proceed with all default installation and then try installing Oracle.
I hope this will suffice.
Thanks
Venugopal

Sql Server configuration requirements for SAP ECC 6.0

Dear All,
I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0 with Oracle 10.2G which is the most common combination.I am having docs for this combination.
I am installing ecc for the first time.
*I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
Thanks for your efforts.

"Excuse me?
What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
You can use the software available here in the SDN to lean and study, that's why it's there.
If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
Do u understand what is legal or illegal? Have u read the license in full?
The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
Therefore there is nothing illegal about it.
It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
Since it being used for training purpose the above does not hold good.
In fact it is SAP who is benefited in the long run bec' after a person learns it technology because he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
Edited by: coolmind26 on Jun 5, 2011 10:57 AM

Configurations required for IDOC to File

Can any body suggest me the configuration required for integrating remote R/3 system with the XI Server.
I want to know the following.
1) How and where to configure R/3 with the XI server.
2) What are the configurations required for Outbound and Inbound IDocs in R/3 and XI Servers.

Hi Rajeshwar,
take a look over here:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/weblogs/topic/16
you'll find at least 5 weblogs that show the idoc configuration
Regards,
michal
XI FAQ - http://www.bcc.com.pl/netweaver/sapxifaq

Error during Checking Network Configurations Requirements in RHEL3 VM

Hi,
I have a Red Hat Enterprise Linux Image Virtual Machine on my desktop which uses Fedora Linux. I have set this up using VMplayer.
I need to install Oracle 10g on the RHEL VM.
As the RHEL VM does not have X Windows, I am connecting to it from the Fedora Linux to do the installation.
During the Product-specific Prerequisite checks:
Checking Network Configurations Requirements throws an error,
Please find it below:
Actual Result: Unknown Host Exception has Occured :rhel3vm:rhel3vm
Check complete: The overall result of this check is: Not executed <<<<
Recommendations: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle software to function properly.
The Fedora Linux gets the IP address from the DHCP and allocates an IP address to the VM.
However, when we set both of them as static and the problem still persists, and also when we set the fedora as dynamic and RHEL VM as static, the issue is not resolved.
Any help will be truely appreciated. Thank you.

We were running a non-DHCP (static IP) configuration and ran into this issue. We discovered that the hostname and FQDN were not correctly specified in the /etc/hosts file.
Fixing the hosts file to correctly reference the IP resolved the issue.
Hope this helps...
-john

Network Configuration requirements not executed, why?

During installation all checks are passed but this one, is there any particular reason for this check not to be executed? Should I worry over it not beein executed?
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
I'm trying to install Oracle 10g 2 on a Red Hat 4 server with a static IP.

Hi!
Either your machine is setup to use DHCP after all or the installer just has trouble to find the correct information.
Recheck the network settings of your machine (redhat-config-network).
Just ignore the warning and continue.
cu
Andreas

Network configuration requirements 10g

hi every body
i am trying to install oracle 10 g db using Vmware on Centos 5.
i have performed all the steps as described in installation guides but when OUI is checking pre reqs it is giving this error
"checking network configuration requirements" and then "not executed"
can somebody please specify these requirements ???
in case i want to move forward it says that you can expect some problems during installation ???
thnx in advance .
Regards

do you have a network setup ? Can you ping other servers from the VM ?
You can run a database without a network. The listener configuration may fail, but you can easily re-run it later. You could just do the install, and see if anything else fails. If it does, the error may give more information.
Or you can turn off the check using
runInstaller -ignoreSysPrereqs

Checking Network Configuration requirements

Hi
I am getting the following error while installing oracle database 11gR1
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
========================================================
OS: SUSE 10 SP2
My network is configured to static ip, and DHCP is disabled. I don't know what else can be the reason, please, give some pointers...
regards
RF

oracle@bitmatrix:~> /sbin/ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:13:8F:B1:A4:0D
inet addr:192.168.102.70 Bcast:192.168.102.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:102126 errors:0 dropped:0 overruns:0 frame:0
TX packets:1323 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7368939 (7.0 Mb) TX bytes:83864 (81.8 Kb)
Interrupt:177 Base address:0xcc00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:84093 errors:0 dropped:0 overruns:0 frame:0
TX packets:84093 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22063435 (21.0 Mb) TX bytes:22063435 (21.0 Mb)

CHECKING NETWORK CONFIGURATION REQUIREMENTS : WARNING

Hello........
when I want to install oracle 10.2.0.1 software, there is warning about CHECKING NETWORK CONFIGURATION REQUIREMENTS
it is :
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
what can I do
tank you very much to help
ömer faruk akyüzlü
in Turkey

I suggest you to read this thread: Re: I can't access to my Enterprise Manager. Then you'll realize why it is important to define a fixed IP Address and not to entirely rely on a DHCP dynamically assigned IP Address. This thread shows you how to configure a Loopback adapter to solve this issue.
~ Madrid

Oracle apps configuration required to install oracle lite database

Hi,
Can any one suggest me the oracle apps setups and configuration required for installing the oracle lite databse in my laptop.
The olite databse must sink with my existing oracle apps.
thanks in advance...

user596857 wrote:
Dear Experts, (I'm far from expert, but I possess enough shreds of knowledge to answer your question, so here goes. ;-) )
1a)
My server has Oracle version 11.1.0.6.0, but the matrix says it wants 11.1.0.7.
I should get a warning right?
Can I just proceed with the install, over-riding the warning?
1b)
If so, what is the procedure to install into the existing database?
It wasn't obvious in the (150 page) install docs. The EBS install delivers its own ORACLE_HOME for the database. There isn't an option to install into an existing database as far I know. The installer will ask where to put the new ORACLE_HOME for the EBS database. You might get a warning if you try to install to a pre-existing ORACLE_HOME, and I don't recommend ignoring that warning. The result will either be ugly immediately or, even worse, ugly later when it's harder to figure out why. ;-)
Do an upgrade?Won't really help. The ORACLE_HOME that's bundled with the installer usually comes with additional patches pre-installed, as well as EBS-friendly configuration options. You're much better off taking what it gives you so you can get down to the real fun of learning EBS. :-)
Or, do regular install, but not Express/Rapid Install?I recommend doing a Vision install for learning EBS.
Can I choose not to install the database software?Nope (unless my memory is really that bad), and there's no real benefit to doing so. All you'd save is a couple GB of disk, and as a percentage of the total install footprint of EBS, the database ORACLE_HOME is relatively tiny.
Regards,
John P.
http://only4left.jpiwowar.com

Configuration Required to set up XI in System

Hi to all,
Can anyone provide me the Minimum Configuration required to set up XI system
Thanks in Advance

Hi,
Refer below link
Installation Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Also this
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a5550de0-0701-0010-a8b4-9fd433a080f3
https://websmp109.sap-ag.de/instguidesNW70
Tuning guide -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Thanks
To install XI, what should be minimum configuration

Configuration required to add a custom transaction to RF menu?

Hello experts,
what configuration required to add a custom transaction to RF menu?
Thanks for your help in advance
Edited by: rksap7284 on May 16, 2008 9:59 AM

You need to assigned the developed transaction code in the RF menu desiging configuration
Path: SPRO --> Logistics Execution --> Mobile data entry --> RF menu management.
Hope this helps.
Regards
Arif Mansuri

Configuration require for SOLMAN after installation

Dear all,
I have successfully install Solution Manager 7.0 EHP1 on Windows Server 2008 Oracle 10g database.
Now I cant understand what are the configuration require and from where shall i start?
Please help me as I am a beginner.
Thanks
Nurujjaman

Hi,
Follow the steps from the configuration guide for basic configuration activities:
https://service.sap.com/~sapidb/011000358700000308502009E/SM_CONF_SPS23.pdf
Also check http://service.sap.com/~sapidb/011000358700001735062008E to get a visual help.
For advanced configuration, follow the RKT at http://service.sap.com/rkt-solman
Regards,
Srikishan

Why do i get a daq hardware configuration required window when trying to run the daq solution wizard?

i have recently installed the ni 4552 for pci dynamic signal analyser, and am attempting to configure my system and teach myself labview. when attempting to run the daq solution wizard i am presented with the daq hardware configuration required window.
Attachments:
DAQ_Hardware_Configuration_Required.ppt ‏38 KB

hi brian, thanks for your help. i have recently received version 6.1, and done a complete re-install. i have also downloaded the latest ni daq (6.9.2) and ni dsa (6.11) versions and installed them, but still i get the same error message when trying to open the solutions wizard (please see attached powerpoint presentation).
upon selecting the "go to ni daq config utility" option MAX opens. everything appears to be in order (device passes test, test panels run ok and virtual channels are configured correctly). i am unable to go any further.
i would appreciate any guidance that you are able to give me in this matter. many thanks in advance of your help.
best regards,
ben halkon

XI to BAPI - Configuration required

Similar Messages

Maybe you are looking for