XI to RFC Scenario

Hi SapAll.
i had created a Remote Function Module in SAP-R/3 with 2 structures under tables(tab)and this rfc is going to collect data from xi for doing some bdc and then when the bdc fails,rfc will return values to xi.
in this real time scenario what xi will do,i know that xi will collect the data from rfc.
as i have got the Netweaver-PI Software i would like to create a sample interface in PI for doing the above mentioned scenario
so what my question is how and in what way we can do this in XI without BPM,after xi collect the export parametes from rfc with failed reasons what xi do,will it update the sender.
will be waiting for a good answer.
regards.
Varma

1. if ur sender adapter is sync like SOAP
you sync RFC scenario...whatever the resposne that u get from RFC can be mapped back to sender using the response mapping..if the sender supports that fore.g if u are using SOAP as sender..
2. if ur sender adapter is not sync like file / JDBC / JMS
just do the RFC lookup in mapping ..map the response to the target structure and use the receiver which is same as the sender and generate file to the sender

Similar Messages

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Error while calling RFC adapter(FILE-XI-RFC scenario)

Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere

File to RFC scenario with no BPM

I want to create File to RFC scenario with no BPM. I want to invoke RFC synchronously to verify that I'm getting correct response back, but i dont wanna process the response. So, In SXMB_MONI i can check the response back from RFC right? Or do I need to have BPM if want to see the response back from RFC?
What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK?
Thanks,
Deepesh

Hi,
I need to have BPM if want to see the response back from RFC? ... yes
The BPM will help you find the response very comfortable.
What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK? ..Yes you can .
Regards
Agasthuri Doss

File-to-File/RFC scenario with reading filename

Hi,
i have a File-to-File/RFC scenario which causes some problems in desining it correctly. Maybe some of you has an idea how to do this.
Scenario:
- A file is picked up by a File-Adapter. The files are different: pdf, doc, tiff, jpg, txt, ...
- The file must now go through a business process (not necessary the file, but i need the filename in the business process).
- The process has to contact several backend systems (SAP R/3) to collect some data. To achieve this the filename has to be send to this systems.
- The collected data are send via SOAP to a receiver system
- The file itself has to be stored in a directory via File-Adapter.
Here's my problem:
- Is it possible to transport the binary file content within a message which contains other elements (e.g. filename)?
- Is it possible to do graphical mappings with such a payload (only 1 to 1)? Or must i use Java Mappings only?
- How to generate a Message from the sender File Adapter which contains binary file content AND filename? Is this possible with a Module?
- Is it better to create 2 messages with an adapter module? One with the image the other with the filename. Or is it better to split them later in a Mapping?
Thanks in advance,
ms

If all that you need is the file name, use adapter specific settings in the sender file adapter. Then you can access the file name in mapping runtime in UDFs. If you want to have content of the pdf, jpg etc images, i do not think there are ready modules available except for reading pdfs ( you might have to research on this).
For look ups etc with R3 systems, you can use the file name that you got from the adapter and store it in mapping fields.
VJ

Fixed Length of a field in the File-XI-RFC Scenario

Dear All,
I am doing one File-XI-RFC scenario in which user is sending me the file with some delivery nos (VBELN) in it and I am sending those all delivery nos to my RFC in R/3.
Now I want one conition to be put that if any delivery no is of less than 10 characters than that delivery no should not be sent to RFC rest the remaining will be processed to RFC.
I have put one UDF for this whose code is as follows:
int len = a.length();
if (len == 10)
int b=1;
b = (1/len);
return a;
But this code is not working. Please guide me how to solve this problem.
Regards,
N.Jain

HI,
Input is A : Delivery No take all the delivery no in one context.
for(i=0;i<A.length;i++)
int b= Integer.parseInt(A); it will remove all the leading zeros if it has any.
int j=(new Integer(b).toString().length()); count the lenght of the Del no.
if(j>10)
result.addValue(A(i));
else
result.addValue("null"); will not send anything.
Thanks and Regards,
Chirag gohil

Soap -- XI -- IDOC/RFC scenario

Hello,
I have a jsp page that working in tomcat server.
I want to send values from jsp page to xi to r/3. I think it will have
soap-- xi -- IDOC/RFC scenario
Pls send me pdf /doc to implemet it
Regards

Hi,
Please Refer the Following Links
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Regards
Khanna

Issue in HTTP to RFC scenario

Hi Experts,
i am working on HTTP to RFC scenario.From Http client i am sending data to integration engine.
i am unable to see any messages in SXMB_MONI.Means data from HTTP client not reached Integration engine.
why the data is not reaching integration engine?
This scenario needs any configuration settings in XI or any changes in HTTP client??
Plz suggest me in this issue?
Regards,
Bhuvan.

Hi Experts,
thanks for giving replies.
The response i am geting in HTTP client:
Result:
<! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 404 &nbsp Not Found</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP J2EE Engine/7.00 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> The requested resource does not exist.</td>
</tr>
<tr bgcolor="#FFFFFF">
 <td align="left" valign="top" height="48"> Details:</td>
 <td align="left" valign="top" height="48"><pre> Go to <A HREF="/" target="_parent">main page</A> of this application!</pre></td>
</tr>
</body>
</html>
Regards,
Bhuvan.

XI to RFC Scenario: Runtime error during RFC Call

Hi,
I am testing a XI-to-RFC scenario involving BPM. The RFC works perfectly from SE37; but I get 'ICM_HTTP_TIMEOUT, Error code 402' when I invoke it from XI. On digging through the problem, it appeared that the calling program produced a short dump at the ABAP end. The code is as follows:
module %_rfcdia_start output.
 "Do not display screen !
 call 'DY_INVISIBLE_SCREEN'.
 perform remote_function_diastart.
endmodule.
module %_rfcdia_call output.
 "Do not display screen !
 call 'DY_INVISIBLE_SCREEN'.
 perform remote_function_diacall.
endmodule.
module %_cpic_start.
if sy-xprog(4) = '%RFC'.
 perform remote_function_call using rfctype_external_cpic.
else.
 call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
 perform cpic_call using convid.
endif.
endmodule.
form cpic_call using convid type c.
communication send id convid buffer header.
if sy-subrc eq 0.
 perform (sy-xform) in program (sy-xprog).
else.
 message a800.
endif.
endform.
form remote_function_call using value(type).
data rc type i value 0.
do.
********This is the line where error occurs************
 call 'RfcImport' id 'Type' field type.
 if sy-xprog = 'JAVA'.
 system-call plugin
 id 'JAVA' value 'FORW_JAVA'
 id 'RC' value rc.
if there is no rollout on the JAVA side which
rolls both, JAVA and ABAP, we return to the
C-Stack and reach this point
in case there was an rollout, the ABAP-C stack is lost
and we jump direkt to this point
here we trigger the rollout on this Abap side with
the following statement
 system-call plugin
 id 'JAVA' value 'ROLL_OUT'
 id 'RC' value rc.
 else.
 perform (sy-xform) in program (sy-xprog).
 rsyn >scont sysc 00011111 0.
 endif.
Anybody has any idea why it is happening? Is it a network issue? The dump in ST22 says that 'The program "SAPMSYS1" was terminated manually'. How it is possible to manually abort an automatic call?
Awaiting reply.
Regards.

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

Mapping error in file(FCC) to rfc scenario

Hi,
i am trying to implement mapping in file (fcc) to rfc scenario. the source file is getting picked up, but the problem is arising during mapping. i am unable to generate the target structure. i am attaching mapping structure as follows
Source Structure                           Target Structure: RFC
storesales                                     -POSDW-CREATE_TRANSACTIONS_EXT
     recordset                                      it_transaction
       gmd_site_101                                 item
      gmd_site_102
      gmd_site_103
      gmd_site_104
here the recorset is mapped to item, and fields of subnode gmd_site_101 is mapped to fields of subnode item. similarly, for the other subnodes. but when testing with xml file, the target field is not getting generated. in FCC parameters, ignorerecordset name is set to "true".
any help would be very helpful..thanks in advance.
warm regards,
kartz

hi
You can test the data using payload from SXMB_MONI in message mapping test tool so as you can get to know the reason of failure.
It would be better if you paste the error you are getting over there.
Check if you have maintained the namespace in CC or not. it should be same maintained if you have kept namespace in message type.
Also check in FCC parameters you must have used ignoreRecordsetName = true
Regards
Raj

SOAP Sender to RFC Scenario WSDL File

Hi,
I am working on SOAP -> PI -> RFC Scenario. I generated WSDL from sender agreement and gave to the client that can consumed by the third party system. But client is not ready to consume the WSDL. He provided WSDL and asking me to use that. Could you please suggest whether WSDL given by the client can be used in SOAP -> PI -> RFC Scenario. If it is possible, could you please provide steps how it can be done?
Thank you.
Regards,
Cdr.

Thank you Hareesh & Divya,
When we generate WSDL from PI, it gives soap action and soap address location based on the interface we use for SOAP -> PI -> RFC.
When we import WSDL given by the client as external definition, we get messages(Structures). But where do we pass the soap action or address location. I do not see any option in the soap sender communication channel. I am not visualize the link.
Can somebody share their knowledge if they have done in this way.
Thank you.
Regards,
Cdr.

Problem in storing data in BAPI in File to RFC Scenario

Hi everyone,
I m doing File to RFC Scenario.......I completed design and configuration part and actived the Communication Channels.....
Now when I check in Runtime workbench I am getting succefully executed both at outbound and Inbound Channels.......but
data is not updated in BAPI...........
I m getting following error when I check in Component monitoring......
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive
Please help me out.......
Regards,
Sudheer.

Hi
"I took Business Service as Service but not Business System.....Will it effect the scenario???......"
I suggest While dealing with the SAP Systems we should use Business systems.
Pls check the foolowing Threads for the above Query
RFC - Business Service
Re: business service for file to rfc
Regards
Abhijit

SOAP to RFC Scenario (automatic updation)

Hi All,
I have a requirement, i.e we have a web system. In that gold rates will update in every one hour.
When ever the update will happen that should be update in SAP system via RFC call automatically.
Here sender side I am using SOAP adapter.
I know the process to do the soap--rfc scenario.
But how the gold rates will updates automatically in SAP system, with out triggering some one?
can any one guide me to do this scenario.......
Thanks in advance......

Hi Maridu,
yes with availibility time planning you can choose daily: monday, tuesday, not wednesday (for instance), thursday, etc.., plus for these day, a run which begins at 17:00 during 4 hours (for instance)... so to define a range, but that, it's mainly usefull with a FILE adapter as we have a polling (e.g every 60S or 3600S = 1h).
but as you, you use a sender SOAP, and if I'm not wrong (I have not a PI under eyes just now) you have not a polling. So a solution should be to define several availibility-time plannings (one per hour) on your same sender CC. Low work effort and easy to do.
Another solution is to not use availlibility-time planning, but to define your sender CC as "external" in "RWB -> CC monitoring", and to use an external tools (*) to trigger externally this sender CC, in fact to call an HTTP address by passing the "party | businessComponent | Sender CC" plus an action (STOP or START, this CC). There are several blogs on SDN to know how to trigger externally a CC (sender or receiver).
(*) external tool can be a unix command (wget), or a scheduler tool (to buy) like $universe (for instance) or eventually a sap job which run an abap program which call this HTTP address.
regards
mickael

Soap to rfc scenario error

Hi PI Experts,
For the first time i was doing soap to rfc scenario. I have created all the objects in the ID and in the IR and also created a web service from ID an then i have saved the wsdl in my system. I have uploaded the wsdl in altova xml spy and tested it but i got an error like 'no channel specified'. and also got an error 'unable to post the file'.
so kindly please help me to solve this scenario.
Thanks & Regards,
B.Srinivas Prasad.

I have uploaded the wsdl in altova xml spy and tested it but i got an error like 'no channel specified'. and also got an error 'unable to post the file'.
Make sure that its in the below format :
From SAP help :
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
Under party:service:channel enter the party name, the service name, and the name of the communication channel. If no party has been created, enter the following: channel=:service:channel
and check Sender Soap Channel Status is it activated/not and check Cache Status

SOAP to RFC scenario prolem

Hello Guru's
 Im trying the basic SOAP TO RFC scenario, in which RFC is SXIDEMO_AIRL_FLIGHT_CHECKAVAIL
and the out bound interface consists of only basic feilds i.e.
REQUEST MESSAGE TYPE : AirlineID
 ConnID
 Fldate
RESPONSE MESSAGE TYPE : Ecnofree
 Bussfree
 Firstfree
and no fault message type.
i created the scenario with out any errors, and i defined webservies in ID with the following URL
http://starxi:50000/XISOAPAdapter/MessageServlet?Channel=:SXI_BS_SOAPRFC_SENDER:SOAP_RFCSENDER
it is according to the following syntax
htt://<xi server>:<J2EE Port>/XISOAPAdapter/MessageServlet?channel=:<sender business system>:communication channel.
But im not able to post SOAP request to the xi server. it is saying following error
"SOAP Request cannot be posted <with url > 403"
403 is the error code.
please can anyone help me in overcoming the above problem. and where iam wrong.
Thanks in advance
arjun

Hi!
Please check once again reg SOAP URL while generating the WSDL.
[http://<HOST name:5<Port>00/XISOAPAdapter/MessageServlet?channel=:<Channel Name>:<Adapter Name>]
[Re: Using SOAP Sender adapter in PI 7.1]
1. Check whether your SOAP URL s correct or not which you are giving in the receiver SOAP adapter
2. Also check you are giving the SOAP action in the receiver SOAP adatper correctly or not.
3. Finally check the SOAP service is activei or not in SAP>BC>XI-->SOAP in ABAP stack
4. Since FIle is only for ASYN comm and while using FILE for sync interface you need to pass module paramters in the Sender File CC
ERROR 403 means::
This error will be comming mostly in the synch scenarios like SOAP to RFC - SOAP and FIle to RFC--FILE
when the target system is down or service is inactive.
Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
u2022 HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
u2022 Because of Inactive Services in ICF u2013Go to SICF transaction and activate the services. Refer SAP Note -517484
u2022 Error in RWB/Message Monitoring- because of J2EE roles u2013 Refer SAP Note -796726
u2022 Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. u2013Because of the URL is incorrect or the adapter is not correctly deployed.
Regards::
Amar Srinivas Eli

XI to RFC Scenario

Similar Messages

Maybe you are looking for